RGQ-PEBBLE-WATCH2Smartwatch

1 CONSTRUCTION PHOTOS OF EUT 2 3 4 5

6 7 8 9 10 11 12

Report No.: SA131113C01 1 of 6 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA131113C01 MODEL NO.: 401B, 401S FCC ID: RGQ-PEBBLE-WATCH2 RECEIVED: Nov. 13, 2013 ISSUED: Nov. 29, 2013 APPLICANT: Pebble Technology Corporation ADDRESS: 639 High St., Palo Alto, CA 94301, United States ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA131113C01 2 of 6 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION .............................................................................................. 4 2. EVALUATION RESULT .................................................................................... 5 3. SAR TEST EXCLUSION THRESHOLDS ......................................................... 6 Report No.: SA131113C01 3 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA131113C01 Original release Nov. 29, 2013 Report No.: SA131113C01 4 of 6 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Smartwatch MODEL: 401B, 401S BRAND: Pebble APPLICANT: Pebble Technology Corporation TEST SAMPLE: Production Unit STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Nov. 29, 2013 Gina Liu / Specialist APPROVED BY : , DATE : Nov. 29, 2013 Roy Wu / Manager Report No.: SA131113C01 5 of 6 Report Format Version 5.0.0 2. EVALUATION RESULT Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where  .  calculation.  e decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SA131113C01 6 of 6 Report Format Version 5.0.0 3. SAR TEST EXCLUSION THRESHOLDS Maximum measured transmitter power: Frequency (GHz) Max. Power (mW) Min. test separation distance (mm) SAR test exclusion calculation value (NOTE 2) 10-g extremity SAR test exclusion thresholds Result 2.402 ~ 2.480 12.331 5 3.821 7.5 Pass NOTE: 1. The antenna type is PIFA antenna with -4.5dBi gain. 2. Calculate SAR test exclusion thresholds from condition “1” formulas.

Report No.: RF131113C01 1 of 45 Report Format Version 5.2.0 FCC TEST REPORT (BLUETOOTH) REPORT NO.: RF131113C01 MODEL NO.: 401B, 401S FCC ID: RGQ-PEBBLE-WATCH2 RECEIVED: Nov. 13, 2013 TESTED: Nov. 22, 2013 ~ Nov. 23, 2013 ISSUED: Nov. 29, 2013 APPLICANT: Pebble Technology Corporation ADDRESS: 639 High St., Palo Alto, CA 94301, United States ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF131113C01 2 of 45 Report Format Version 5.2.0 Table of Contents RELEASE CONTROL RECORD ......................................................................................................... 4 1. CERTIFICATION ...................................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................ 6 3. GENERAL INFORMATION ...................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ........................................................................ 7 3.2 DESCRIPTION OF TEST MODES.......................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................ 9 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 11 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................. 12 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ......................................... 12 4. TEST TYPES AND RESULTS ............................................................................................... 13 4.1 Radiated Emission AND BANDEDGE Measurement ............................................ 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ... 13 4.1.2 TEST INSTRUMENTS ................................................................................ 14 4.1.3 TEST PROCEDURES ................................................................................ 15 4.1.4 DEVIATION FROM TEST STANDARD ....................................................... 15 4.1.5 TEST SETUP .............................................................................................. 16 4.1.6 EUT OPERATING CONDITIONS ............................................................... 16 4.1.7 TEST RESULTS ......................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................ 22 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................... 22 4.2.2 TEST INSTRUMENTS ................................................................................ 22 4.2.3 TEST PROCEDURES ................................................................................ 23 4.2.4 DEVIATION FROM TEST STANDARD ....................................................... 23 4.2.5 TEST SETUP .............................................................................................. 24 4.2.6 EUT OPERATING CONDITIONS ............................................................... 24 4.2.7 TEST RESULTS ......................................................................................... 25 4.3 NUMBER OF HOPPING FREQUENCY USED ..................................................... 27 4.3.1 LIMIT OF HOPPING FREQUENCY USED ................................................. 27 4.3.2 TEST SETUP .............................................................................................. 27 4.3.3 TEST INSTRUMENTS ................................................................................ 27 4.3.4 TEST PROCEDURES ................................................................................ 27 4.3.5 DEVIATION FROM TEST STANDARD ....................................................... 27 4.3.6 TEST RESULTS ......................................................................................... 27 4.4 DWELL TIME ON EACH CHANNEL ..................................................................... 29 4.4.1 LIMIT OF DWELL TIME USED ................................................................... 29 4.4.2 TEST SETUP ..................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST 3 4