
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
1.Double click pairing â â button to pair wireless remote with receiver. 2.Press "+" & "-" for level up & down 3.Press â â&â âfor track forward & backward 4.Press â â to play and pause music 5.Double tap â â to switch between Bluetooth and Aux modes 6.LED low battery indicator (Green), operation indicator (Blue) & charging indicator (Red). Battery Charging Steering Wheel/Bar Mount Open the cover at back of the unit, you will see the micro USB charging port. Plug in any micro USB cable to charge the battery, the red LED stays on. When it is fully charged, the red LED stays off. Snap the unit into the plastic adaptor. Using the included rubber band for steering wheel & bar mounting, hold the rubber against the steering wheel. Wrap it around, then hook it up Cover Charging Port Plastic Adaptor Rubber Band Hooks Pair with Receiver Push 2X PLAY/PAUSE Push once Push 2X VOLUME UP VOLUME DOWN NEXT TRACK Push once Push once Push once Push once PREVIOUS TRACK TOGGLE AUX /BLUETOOTH MODES Âź Powerbar Remote Model: KPBRC ISED Statement â English:This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadaâs licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICESâ3 (B)/NMBâ3(B). French: Cet appareil contient des Ă©metteurs/rĂ©cepteurs exempts de licence qui sont conformes aux RSS exemptĂ©s de licence d'Innovation, Sciences et DĂ©veloppement Ă©conomique Canada. L'exploitation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d'interfĂ©rences. (2) Cet appareil doit accepter toute interfĂ©rence, y compris les interfĂ©rences susceptibles de provoquer un fonctionnement indĂ©sirable de l'appareil. l'appareil numĂ©rique du ciem conforme canadien peut â 3 (b) / nmb â 3 (b). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme Ă l'exemption des limites d'Ă©valuation courante dans la section 2.5 du cnr - 102 et conformitĂ© avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des donnĂ©es canadiennes sur l'exposition aux champs rf et la conformitĂ©. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. Cet Ă©quipement est conforme aux limites d'exposition aux rayonnements du Canada Ă©tablies pour un environnement non contrĂŽlĂ©. The device has been evaluated to meet general RF exposure requirement. The device can be usedin portable exposurecondition without restriction. L'appareil a Ă©tĂ© Ă©valuĂ© pour rĂ©pondre aux exigences gĂ©nĂ©rales d'exposition aux radiofrĂ©quences. L'appareil peut ĂȘtre utilisĂ© en condition d'exposition portable sans restriction. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ·Reorient or relocate the receiving antenna. ·Increase the separation between the equipment and receiver. ·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ·Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Powerbar Remote Model: KPBRC
CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2021-7-9> Pursuant to Paragraphs §0.457 and 0.459 of the Commissionâs Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name RGR-KPBRC KPBRC For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Userâs Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/TitleïŒ Joe Hobart/R&D Electronics Manager Company: Stillwater Designs and Audio Inc. Address: 3100 N Husband Stillwater Oklahoma United States Phone: 405-533-7505 Fax: 405-624-0033 E-Mail: [email protected]
Stillwater Designs and Audio Inc. 3100 N Husband Stillwater Oklahoma United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2021-7-9 To whom it may concern: We, Stillwater Designs and Audio Inc. the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: RGR-KPBRC including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/TitleïŒ Joe Hobart/R&D Electronics Manager Company: Stillwater Designs and Audio Inc. Address: 3100 N Husband Stillwater Oklahoma United States Phone: 405-533-7505 Fax: 405-624-0033 E-Mail: [email protected]
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: RGR-KPBRC IC: 11078A- KPBRC This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 3 1. EXTERIOR PHOTOGRAPHS Fig. 1 Fig. 2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: RGR-KPBRC IC: 11078A- KPBRC This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 3 Fig. 3 Fig. 4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: RGR-KPBRC IC: 11078A- KPBRC This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 3 Fig. 5 Fig. 6
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: RGR-KPBRC IC: 11078A- KPBRC This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 LABEL AND LOCATION Size: L 2.0cm*W1.0cm FCC ID: RGR-KPBRC IC:11078A- KPBRC HVIN: KPBRC Label Location
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: RGR-KPBRC IC: 11078A- KPBRC This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 2 1. INTERIOR PHOTOGRAPHS Fig. 1 Fig. 2 Antenna SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: RGR-KPBRC IC: 11078A- KPBRC This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 2 Fig. 3 Fig. 4
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: RGR-KPBRC Report No.: LCS210324018AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 36 FCC TEST REPORT FOR Stillwater Designs and Audio, Inc. Powerbar Remote Test Model: KPBRC Prepared for : Stillwater Designs and Audio, Inc. Address : 3100 N. Husband Stillwater, OK 74075, USA Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Shajing Street, Baoâan District, Shenzhen, Guangdong, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : May 19, 2021 Number of tested samples : 2 Sample number : 210324018A-1, 210324018A-2 Sample number : Prototype Date of Test : May 19, 2021 ~ May 31, 2021 Date of Report : June 03, 2021 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: RGR-KPBRC Report No.: LCS210324018AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 36 FCC TEST REPORT FCC CFR 47 PART 15 C(15.249) Report Reference No. ................. : LCS210324018AEA Date of Issue................................... : June 03, 2021 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ........................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Shajing Street, Baoâan District, Shenzhen, Guangdong, China Testing Location/ Procedure .......... : Full application of Harmonised standards â Partial application of Harmonised standards ⥠Other standard testing method ⥠Applicantâs Name ......................... : Stillwater Designs and Audio, Inc. Address ........................................... : 3100 N. Husband Stillwater, OK 74075, USA Test Specification Standard ......................................... : FCC CFR 47 PART 15 C(15.249) / ANSI C63.10: 2013 Test Report Form No. ..................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2019-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. .................. : Powerbar Remote Trade Mark ..................................... : Kicker Test Model ...................................... : KPBRC Ratings ............................................ : DC 3.7V by Rechargeable Li-ion Battery, 180mAh Result ........................................... : Positive Compiled by: Supervised by: Approved by: Vera Deng/ Administrators Jin Wang/ Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: RGR-KPBRC Report No.: LCS210324018AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 36 FCC -- TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS210324018AEA June 03, 2021 Date of issue Test Model.............................. : KPBRC EUT......................................... : Powerbar Remote Applicant............................... : Stillwater Designs and Audio, Inc. Address.................................. : 3100 N. Husband Stillwater, OK 74075, USA Telephone............................... : / Fax.......................................... : / Manufacturer........................ : INNOVATIVE AUDIO INTERNATIONAL CO., LTD Address................................... : 5th Rd, 4th District, LiLin square, LiLin Town, Huizhou City, Guangdong province, China, 516035 Telephone............................... : / Fax.......................................... : / Factory................................... : INNOVATIVE AUDIO INTERNATIONAL CO., LTD Address................................... : 5th Rd, 4th District, LiLin square, LiLin Town, Huizhou City, Guangdong province, China, 516035 Telephone............................... : / Fax.......................................... : / SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: RGR-KPBRC Report No.: LCS210324018AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 36 Revision History Revision Issue Date Revisions Revised By 000 June 03, 2021 Initial Issue Gavin Liang SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: RGR-KPBRC Report No.: LCS210324018AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 36 TABLE OF CONTENTS 1. GENERAL INFORMATION ........................................................................................................ 6 1.1 Description of Device (EUT) .............................................................................................................. 6 1.2. Support Equipment List ..................................................................................................................... 6 1.3. External I/O ......................................................................................................................................... 6 1.4. Description of Test Facility ..............................................âŠ
Text truncated - open the document above for the full version.
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: RGR-KPBRC IC: 11078A- KPBRC _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 2 TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement Fig. 1 Fig. 2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: RGR-KPBRC IC: 11078A- KPBRC _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 2 1.2. Photo of Conducted Emissions Measurement Fig. 3
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.46 GHz - 2.46 GHz | - |

Powered BT Cans
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Powerbar
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Marine Audio
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
AMPLIFIED CONTROLLER FOR BLUETOOTH DEVICES
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Bluetooth headphone
Equipment Class
DXT - Part 15 Low Power Transceiver, Rx Verified