RKS-MAJ1901Personal Digital Assistant

Department Confidential Drawing number P1 Model No. MAJ-1901 Product Specification Section 15. Instruction Manual Instruction Manual MAJ-1901 Quick Start Guide Department Confidential Drawing number P2 Model No. MAJ-1901 Product Specification Section 15. Instruction Manual Copyright 2010 Olympus Technologies Singapore Pte Ltd. All rights reserved. Olympus and Olympus logo are trademarks of Olympus Technologies Singapore Pte Ltd. Other product and brand names may be trademarks or registered trademarks of their respective owners. Olympus Technologies Singapore Pte Ltd assumes no responsibility for any damage or loss resulting from the use of this guide. Olympus Technologies Singapore Pte Ltd assumes no responsibility for any loss or claims by third parties which may arise through the use of this product. Olympus Technologies Singapore Pte Ltd assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery or repairs. To protect against data loss, be sure to make backup copies (on other media) of all important data. Important: Please read the End User License Agreement for this product before using the device or accompanying software program(s). Using the device or any part of the software indicates that you accept the terms of the End User License Agreement. Department Confidential Drawing number P3 Model No. MAJ-1901 Product Specification Section 15. Instruction Manual Content and Additional Resources To help you get started with your MAJ-1901 PDA, this guide features: - Hardware Overview - Getting Started - Regulatory Information For additional product details, visit www.olympus.com.sg For software updates and information, visit www.microsoft.com. Department Confidential Drawing number P4 Model No. MAJ-1901 Product Specification Section 15. Instruction Manual Hardware Overview Figure 1: PDA Layout Department Confidential Drawing number P5 Model No. MAJ-1901 Product Specification Section 15. Instruction Manual Figure 2: Keys Layout Figure 3: PDA Back Layout Department Confidential Drawing number P6 Model No. MAJ-1901 Product Specification Section 15. Instruction Manual Getting Started Installing/Replacing the Main Battery The main battery is replaceable after removing the battery cover located at the back of the PDA. Charging the PDA (Main Battery) 1) Plug the power jack into cradle connector in the direction as shown. Department Confidential Drawing number P7 Model No. MAJ-1901 Product Specification Section 15. Instruction Manual 2) Switch on the power and ensure the Green LED on power adapter light up. Place the PDA in the cradle as shown, observes the amber LED at the top right corner of PDA: The LED charging indicator is shown below: Mode Amber LED Charging Solid ON Charge Full OFF Charging Fault Blinking 3) Up to 3 cradles can be cascaded using the L-Bracket and screws provided to form a single gang cradle (refer to diagram below), and it is able to charge up to 6 PDA simultaneously. Note: If a fourth cradle is cascaded, the fourth cradle will not work at all. Department Confidential Drawing number P8 Model No. MAJ-1901 Product Specification Section 15. Instruction Manual Department Confidential Drawing number P9 Model No. MAJ-1901 Product Specification Section 15. Instruction Manual Resetting the PDA Reset Type Steps Definition Soft reset (Warm Boot) 1. Press Left Scan and F3 keys simultaneously. OS and application software will be reset. Hard reset (Cold Boot) 1. Remove battery compartment cover. 2. Press Reset switch (in battery compartment) using a stylus 3. Attach battery compartment cover. 4. Press Power On button. Hardware will be reset. Master reset (Clean Boot) 1. Remove battery compartment cover. 2. Press Reset switch (in battery compartment) using a stylus. 3. Attach battery compartment cover. 4. Press and hold the SCAN button. 5. Press Power On button. System settings are restored to factory default. Keys & Switches Refer to Figure 1. Power Button Power button Press this key once to power on the device, to resume the device from suspend mode, or to place the terminal into suspend mode. Keypad Refer to Figure 2 Department Confidential Drawing number P10 Model No. MAJ-1901 Product Specification Section 15. Instruction Manual Application buttons Equipped with 4 function keys F1, F2, F3, F4. The keys are user configurable via software application to launch particular applications. Enter button Execute a selected application. Up button Move a cursor upwards Down button Move a cursor downwards Left button Move cursor to the left Right button Move cursor to the right Back button Return to the previous level Shift button Change the function keys to different set of function keys Scan Key Trigger either the barcode scanner or RFID reader by application. Refer to Figure 1 Side Button Scan Buttons Pressing any of these keys will trigger either the barcode scanner or RFID reader (controlled by software application). Reset Switch Refer to Figure 3 Department Confidential Drawing number P11 Model No. MAJ-1901 Product Specification Section 15. Instruction Manual Reset Switch Reset switch is located inside the battery compartment. LED Colors Color Definition Amber Indicate barcode scanning or RFID tag reading is in progress when in operation. Battery charging in progress when docked in cradle. Green Indicate barcode decoding and RFID reading successfully completed. Amber Blinking Indicate charging fault (when docked in cradle). Department Confidential Drawing number P12 Model No. MAJ-1901 Product Specification Section 15. Instruction Manual Regulatory Information Model no MAJ-1901 shall be considered as regulatory reference number. All devices are designed to comply with local rules and regulations to the countries they are shipped. Any changes or modification without Olympus approval could void the user authority to operate the equipment. Only use Olympus-approved or recommended accessories. Use of alternative accessories will invalid…

Text truncated - open the document above for the full version.

FCC ID: RKS-MAJ1901 IC: 4763A-MAJ1901 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. This test report cannot be reproduced, except in full, without prior written permission of the Company. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service (www.sgs.com/terms_and_conditions.htm ) and Terms and Conditions for Electronic Documents (www.sgs.com/terms_e-document.htm ). Attention is drawn to the limitations of liability, indemnification and jurisdictional issues established therein. Even if printed this electronic document is to be treated as an original within the meaning of UCP 600 article 20b. The authenticity of this document may be verified at www.sgsonsite.com/authentication . Any holder of this docu- ment is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group All View of EUT Front View of EUT – 1 FCC ID: RKS-MAJ1901 IC: 4763A-MAJ1901 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. This test report cannot be reproduced, except in full, without prior written permission of the Company. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service (www.sgs.com/terms_and_conditions.htm ) and Terms and Conditions for Electronic Documents (www.sgs.com/terms_e-document.htm ). Attention is drawn to the limitations of liability, indemnification and jurisdictional issues established therein. Even if printed this electronic document is to be treated as an original within the meaning of UCP 600 article 20b. The authenticity of this document may be verified at www.sgsonsite.com/authentication . Any holder of this docu- ment is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Back View of EUT Side View of EUT - 1 FCC ID: RKS-MAJ1901 IC: 4763A-MAJ1901 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. This test report cannot be reproduced, except in full, without prior written permission of the Company. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service (www.sgs.com/terms_and_conditions.htm ) and Terms and Conditions for Electronic Documents (www.sgs.com/terms_e-document.htm ). Attention is drawn to the limitations of liability, indemnification and jurisdictional issues established therein. Even if printed this electronic document is to be treated as an original within the meaning of UCP 600 article 20b. The authenticity of this document may be verified at www.sgsonsite.com/authentication . Any holder of this docu- ment is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Side View of EUT - 3 Side View of EUT - 4 FCC ID: RKS-MAJ1901 IC: 4763A-MAJ1901 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. This test report cannot be reproduced, except in full, without prior written permission of the Company. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service (www.sgs.com/terms_and_conditions.htm ) and Terms and Conditions for Electronic Documents (www.sgs.com/terms_e-document.htm ). Attention is drawn to the limitations of liability, indemnification and jurisdictional issues established therein. Even if printed this electronic document is to be treated as an original within the meaning of UCP 600 article 20b. The authenticity of this document may be verified at www.sgsonsite.com/authentication . Any holder of this docu- ment is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Side View of EUT – 5 Side View of EUT – 6 FCC ID: RKS-MAJ1…

Text truncated - open the document above for the full version.

M3 Terminal back housing BENSONTANYINGAVIN 1:1 12 SZETAT NOTE: THIS PRINT IS THE ORIGINAL ARTWORK DATA A 2010.04.16 INITIAL RELEASE Regulatory label 5V 2A FCC ID : RKS-MAJ1901 Made in Singapore Model : MAJ-1901 S/N : 1234 56789 0 Manufactured : 11 AUG 2009 ( PRODUCT IDENTITY ) XXXX CONTAINS RADIO SDC-MCF10G Olympus Technology Singapore Pte Ltd 41 Science Park Road #04-17/18 The Gemini Singapore 117610 J AISA RFID M3 Terminal back housing BENSONTANYINGAVIN 1:1 22 SZETAT NOTE: THIS PRINT IS THE ORIGINAL ARTWORK DATA Regulatory label keyline J AISA RFID A 2010.04.16 INITIAL RELEASE 5V 2A FCC ID : RKS-MAJ1901 Made in Singapore Model : MAJ-1901 S/N : 1234 56789 0 Manufactured : 11 AUG 2009 ( PRODUCT IDENTITY ) XXXX CONTAINS RADIO SDC-MCF10G Olympus Technology Singapore Pte Ltd 41 Science Park Road #04-17/18 The Gemini Singapore 117610

FCC ID: RKS-MAJ1901 IC: 4763A-MAJ1901 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. This test report cannot be reproduced, except in full, without prior written permission of the Company. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service (www.sgs.com/terms_and_conditions.htm ) and Terms and Conditions for Electronic Documents (www.sgs.com/terms_e-document.htm ). Attention is drawn to the limitations of liability, indemnification and jurisdictional issues established therein. Even if printed this electronic document is to be treated as an original within the meaning of UCP 600 article 20b. The authenticity of this document may be verified at www.sgsonsite.com/authentication . Any holder of this docu- ment is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group APPENDIX 3 PHOTOGRAPHS OF INTERNAL VIEW OF EUT FCC ID: RKS-MAJ1901 IC: 4763A-MAJ1901 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. This test report cannot be reproduced, except in full, without prior written permission of the Company. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service (www.sgs.com/terms_and_conditions.htm ) and Terms and Conditions for Electronic Documents (www.sgs.com/terms_e-document.htm ). Attention is drawn to the limitations of liability, indemnification and jurisdictional issues established therein. Even if printed this electronic document is to be treated as an original within the meaning of UCP 600 article 20b. The authenticity of this document may be verified at www.sgsonsite.com/authentication . Any holder of this docu- ment is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Open View of EUT – 1 Open View of EUT – 2 FCC ID: RKS-MAJ1901 IC: 4763A-MAJ1901 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. This test report cannot be reproduced, except in full, without prior written permission of the Company. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service (www.sgs.com/terms_and_conditions.htm ) and Terms and Conditions for Electronic Documents (www.sgs.com/terms_e-document.htm ). Attention is drawn to the limitations of liability, indemnification and jurisdictional issues established therein. Even if printed this electronic document is to be treated as an original within the meaning of UCP 600 article 20b. The authenticity of this document may be verified at www.sgsonsite.com/authentication . Any holder of this docu- ment is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Open View of EUT – 3 Open View of EUT – 4 FCC ID: RKS-MAJ1901 IC: 4763A-MAJ1901 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. This test report cannot be reproduced, except in full, without prior written permission of the Company. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service (www.sgs.com/terms_and_conditions.htm ) and Terms and Conditions for Electronic Documents (www.sgs.com/terms_e-document.htm ). Attention is drawn to the limitations of liability, indemnification and jurisdictional issues established therein. Even if printed this electronic document is to be treated as an original within the meaning of UCP 600 article 20b. The authenticity of this document may be verified at www.sgsonsite.com/authentication . Any holder of this docu- ment is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. SGS Taiwan Ltd. No.134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan /台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Open View of EUT – 5 Internal View of EUT – 1…

Text truncated - open the document above for the full version.

Unless otherwise stated the results shown in this test report refer only to thesample(s) testedand such sample(s) are retained for90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by theCompany subject to its General Conditions of Servicepr inted overleaf, available on request or accessible at and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflectsthe Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any.The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company.Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.tw.sgs.com Member of SGS Group Report No. : EN/2010/20002 Page : 43 of 48 Contents 10.APPENDIX............................................................................ 44 10.1 Photographs of Test Setup........................................... 44 10.2 Photographs of the EUT............................................... 46 Unless otherwise stated the results shown in this test report refer only to thesample(s) testedand such sample(s) are retained for90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by theCompany subject to its General Conditions of Servicepr inted overleaf, available on request or accessible at and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflectsthe Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any.The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company.Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.tw.sgs.com Member of SGS Group Report No. : EN/2010/20002 Page : 44 of 48 10.APPENDIX 10.1 Photographs of Test Setup Fig.1 Photograph of the SAR measurement System Fig.2 Photograph of the Tissue Simulant liquid depth 15cm for Flat position 15 cm 2450MHz Unless otherwise stated the results shown in this test report refer only to thesample(s) testedand such sample(s) are retained for90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by theCompany subject to its General Conditions of Servicepr inted overleaf, available on request or accessible at and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflectsthe Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any.The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company.Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.tw.sgs.com Member of SGS Group Report No. : EN/2010/20002 Page : 45 of 48 Fig.3 Testing body-worn SAR by separating 1.5cm between the back of the EUT Fig.4 Testing body-worn SAR by separating 1.5cm between the front of the EUT EUT back to phantom 1.5cm EUT front to phantom 1.5cm Unless otherwise stated the results shown in this test report refer only to thesample(s) testedand such sample(s) are retained for90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by theCompany subject to its General Conditions of Servicepr inted overleaf, available on request or accessible at and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflectsthe Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any.The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company.Any unauthorized alteration, for…

Text truncated - open the document above for the full version.

Unless otherwise stated the results shown in this test report refer only to thesample(s) testedand such sample(s) are retained for90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by theCompany subject to its General Conditions of Servicepr inted overleaf, available on request or accessible at and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflectsthe Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any.The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company.Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.tw.sgs.com Member of SGS Group Report No. : EN/2010/20002 Page : 1 of 48 SAR TEST REPORT Product Name Personal Digital Assistant Company Name Olympus Technologies Singapore Pte Ltd Company Address 41 Science Park Road #04-17/18 The Gemini Singapore 117610 Date of Receipt 2010.02.01 Date of Test(s) 2010.03.21 Date of Issue 2010.03.26 Standards: FCC OET 65 supplement C, IEEE/ANSI C95.1, C95.3, IEEE 1528 RSS-102 In the configuration tested, the EUT complied with the standards specified above. Remarks: This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS Taiwan Electronic & Communication Laboratory or testing done by SGS Taiwan Electronic & Communication Laboratory in connection with distribution or use of the product described in this report must be approved by SGS Taiwan Electronic & Communication Laboratory in writing. Tested by : Antony Wu Date : 2010.03.26 Engineer Approved by : Robert Chang Date : 2010.03.26 Tech Manager Unless otherwise stated the results shown in this test report refer only to thesample(s) testedand such sample(s) are retained for90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by theCompany subject to its General Conditions of Servicepr inted overleaf, available on request or accessible at and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflectsthe Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any.The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company.Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.tw.sgs.com Member of SGS Group Report No. : EN/2010/20002 Page : 2 of 48 Contents 1. General Information ................................................................................................. 3 1.1 Testing Laboratory ........................................................................................... 3 1.2 Details of Applicant.......................................................................................... 3 1.3 Description of EUT........................................................................................... 3 1.4 Test Environment ............................................................................................ 5 1.5 Operation description....................................................................................... 5 1.6 Evaluation Procedures...................................................................................... 5 1.7 The SAR Measurement System ...............................................................…

Text truncated - open the document above for the full version.