RNE278TXDigital Cooking Thermometer

Instruction Manual SAVE THIS MANUAL FOR FUTURE REFERENCE. Questions? Contact Customer Support at (877) 221-1252 or visit www.AcuRite.com. CONTENTS Unpacking Instructions ........... 2 Package Contents .................. 2 Product Registration ............... 2 ................. 2 Setup .................................... 4 Install or Replace Batteries...... 4 Temperature Units .................. 4 Food Preparation ................... 5 Using the Thermometer ........... 5 Warning Messages ................ 8 Troubleshooting ..................... 9 Care & Maintenance .............10 ........................10 FCC Information ...................10 Customer Support ................. 11 Warranty.............................. 11 Digital Cooking Thermometer models 00278 / 00282 00278TX/ 00278RX 2 3 Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.Unpacking Instructions                     Package Contents1. Thermometer display2. Temperature probe & cord3. Remote pager with belt clip 4. Instruction manual PRODUCT REGISTRATION Register online to receive 1 year warranty protection www. AcuRite .com IMPORTANT !"#$$%'"$$ $$'*$+66:;"$*'$  Register a Product    Thermometer Display     Remote Pager 1 17 12 23456 7 8 1. Meat Type Setup Indicator Select Beef, Veal, Chicken, Pork, Poultry, Lamb, Fish, Custom or Boil. 2. Meat Doneness Setup Indicator Select Rare, Medium or Well done; temperatures based on USDA recommended guidelines. 3. Target Temperature Setup Indicator Select target temperature from 14 º F to 450 º F (-10°C to 232°C) 4. Backlight Button5. Check Probe Indicator Indicates probe error, shown with diagnostic code (see page 9). 6. Remaining Cook Time Estimates remaining time food needs to cook during the cooking process 7. Probe Plug-in 8. Power ON/OFF Button9. Meat Type Selection10. Meat Doneness Selection11. Target Temperature12. Alarm ON Indicator An audible alert will sound when target temperature is reached. 13. Current Temperature Arrow icon indicates the direction the temperature is trending and rate of temperature change. 14. Rotary Dial for setup preferences. 15. SELECT button for setup preferences. 16. ALARM Button Enables and mutes audio alert. 17. Wired Temperature Probe 1. Low Battery Indicator Replace batteries when lit. 2. Power ON/OFF button3. Wireless Signal Indicator Lit when wireless connection is established. See page 8. 4. Alert Switch Select audio alert or silent vibrate mode. 5. Belt Clip 9 10 11 12 13 1415 16 3  This product is not intended for use in cooking environments that exceed =>?@DE  G    E   H    45 4 5 SETUP Food Preparation  J   KE  GEE  E may increase your risk of food-borne illness, especially if you have certain      "6       J preparing meat and seafood. Please adhere to the recommended cooking temperatures. USDA Recommended Guidelines Product Minimum Internal Temperature & Rest Time Beef, Pork, Veal & Lamb Steaks, chops, roasts 145 °F (62.8 °C) and allow to rest for at least 3 minutes Ground meats 160 °F (71.1 °C) All Poultry 165 °F (73.9 °C) Fish & Shellfish 145 °F (62.8 °C) For more information on food preparation safety, visit: http://www.fsis.usda.gov Using the Thermometer1. Before operating, plug the temperature probe into the thermometer display.N+    E     G   J   3. Press the “ O       G:D  G information can then be viewed. 4. Press the “ ” button on the thermometer display to enable or disable the audio alert. With the function enabled, you will hear a beep each time a selection is made during setup and when target cooking temperatures are reached. 5. Magnet-mountable design allows you to stick the thermometer on the oven door or fridge. 6. To use the Remote Pager, press the “ ” button on the pager. 7. Slide the Alert switch, located on the side of the Remote Pager, to select audio alert or silent vibrate mode. Set to “ “ to enable audio alert. Set to “ “ to enable silent vibrate mode. Meat Type SetupQ+   J E !G J V    G2. To adjust the meat type, turn the rotary dial clockwise to move forward through the selections and counterclockwise to move backward through the selections Install or Replace BatteriesAcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. Select Degrees Fahrenheit or CelsiusTo select between degrees Fahrenheit (ºF) or Celsius (ºC) temperature units, slide the “ºF/ºC” switch, located in the battery compartment of the thermometer. PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from eq uipment which is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteri es from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteri es. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechar geable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals. Remote Pager1. Slide off the battery compartment cover, located on the bottom of the unit. 2. Insert 2…

Text truncated - open the document above for the full version.

DATE: 2013-8-7 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Company name: Neutron Engineering Inc. Ms. Cathy Wang Address:No.3, JinShaGang 1 st Road, ShiXia, DaLang Town， City: Dong Guan Country: China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Company name: Chaney Instrument Co. Address: Flat 09,19/F.,Metro Centre Phase I,32 Lam Hing Street, Kowloon Bay, Kowloon, Hong Kong City: Kowloon, Hong Kong Country: China Dated this 2013-8-7 Agency agreement expiration date: Usually Give 8 - 12 Months By: Victor Mak Signature Printed Title: Project Manager - Digital Products On behalf of : Chaney Instrument Co. Telephone: +852-35829826

DATE：2013-8-7 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: RNE278TX Product Name: Digital Cooking Thermometer Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, we hereby request that the following documents be held confidential:  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 2013-8-7 By: Victor Mak Signature Printed Title: Project Manager - Digital Products On behalf of : Chaney Instrument Co. Telephone: +852-35829826

Chaney Instrument Co. Model Declaration Letter We, the undersigning company Company Name: Chaney Instrument Co. Address: Flat 09,19/F.,Metro Centre Phase I,, 32 Lam Hing Street, Kowloon Bay , Kowloon bay, Kowloon, Hong Kong, China Hereby confirm that the following products: Product description: Digital Cooking Thermometer Type designation: 00278TX; 00282 ; 00282DI Brand: ACURITE All versions of the Model 00278TX; 00282 and 00282DI are electrically equal and only differ in model name because of marketing purpose. Company Name: Chaney Instrument Co. Address: Flat 09,19/F.,Metro Centre Phase I,, 32 Lam Hing Street, Kowloon Bay ,, Kowloon bay, Kowloon, Hong Kong, China Telephone: +852-35829826 Fax No.: +852-28890331 E-mail: [email protected] Signature: Name: Victor Mak

Neutron Engineering Inc. Project No.: 1307C343 Page 2 of 9 Neutron Engineering Inc. Project No.: 1307C343 Page 3 of 9

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 1.45mm 11.3mm Model:00278TX FCC ID:RNE278TX IC:6608A-278TX MADE IN CHIAN Model :00278TX FCC ID:RNE278TX IC:6608A-278TX MADE IN CHIAN 8mm 15mm 37.7mm 11mm In the middle This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.

Neutron Engineering Inc. Project No.: 1307C343 Page 4 of 9 Neutron Engineering Inc. Project No.: 1307C343 Page 5 of 9 Neutron Engineering Inc. Project No.: 1307C343 Page 6 of 9 Neutron Engineering Inc. Project No.: 1307C343 Page 7 of 9 Neutron Engineering Inc. Project No.: 1307C343 Page 8 of 9 Neutron Engineering Inc. Project No.: 1307C343 Page 9 of 9

Neutron Engineering Inc. Report No.: NEI-FICP-1-1307C343 Page 1 of 39 FCC&IC Radio Test Report FCC ID: RNE278TX IC: 6608A-278TX This report concerns (check one): Original Grant Class I Change Issued Date : Sep. 24, 2013 Project No. : 1307C343 Equipment : Digital Cooking Thermometer Model Name for FCC : 00278TX; 00282; 00282DI Model Name for IC : 00278TX Applicant : Chaney Instrument Co. Address : Flat 09,19/F.,Metro Centre Phase I,32 Lam Hing Street, Kowloon Bay, Kowloon, Hong Kong Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Jul. 30, 2013 Date of Test: Jul. 30, 2013 ~ Sep. 23, 2013 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory: (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL: 0769-8318-3000 FAX: 0769-8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1307C343 Page 2 of 39 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutronshall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1307C343 Page 3 of 39 REPORT ISSUED HISTORY Issued No. Description Issued Date NEI-FICP-1-1307C343 Original Issue. Sep. 24, 2013 Neutron Engineering Inc. Report No.: NEI-FICP-1-1307C343 Page 4 of 39 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 10 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.4 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 16 4.2.1. FIELD STRENGTH OF FUNDAMENTAL EMISSIONS MEASUREMENT LIMIT 16 4.2.2. MEASURING INSTRUMENTS AND SETTING (FIELD STRENGTH OF FUNDAMENTAL 16 EMISSIONS) 16 4.2.3 RADIATED EMISSIONS MEASUREMENT 17 4.2.4. DWELL TIME OF PERIODIC OPERATION MEASUREMENT 18 4.2.5. MEASUREMENT INSTRUMENTS LIST 20 4.2.6. TEST PROCEDURE 20 4.2.7. DEVIATION FROM TEST STANDARD 20 4.2.8. TEST SETUP 21 4.2.9. EUT OPERATING CONDITIONS 22 4.2.1 0 TEST RESULTS (BELOW 30MHZ) 23 4.2.11. TEST RESULTS (BETWEEN 30 – 1000 MHz) 24 4.2.12 TEST RESULTS (ABOVE 1000 MHz) 28 5. 20dB SPECTRUM BANDWIDTH MEASUREMENT 32 5.1.MEASURING INSTRUMENTS AND SETTING 32 5.2.TEST PROCEDURES 32 Neutron Engineering Inc. Report No.: NEI-FICP-1-1307C343 Page 5 of 39 Table of Contents Page 5.3. TEST SETUP LAYOUT 32 5.4. TEST DEVIATION 32 5.5. EUT OPERATION DURING TEST 32 5.6. TEST RESULT 33 6. TIMING TESTING 34 Limit 34 6.1.MEASURING INSTRUMENTS AND SETTING 34 6.2.TEST PROCEDURES 34 6.3. TEST SETUP LAYOUT 34 6.4. TEST DEVIATION 34 6.5. EUT OPERATION DURING TEST 34 6.6. TEST RESULT 35 7. EUT TEST PHOTO 37 Neutron Engineering Inc. Report No.: NEI-FICP-1-1307C343 Page 6 of 39 1. CERTIFICATION Equipment : Digital Cooking Thermometer Trade Name : ACURITE Model Name for FCC : 00278TX; 00282; 00282DI Model Name for IC : 00278TX Applicant : Chaney Instrument Co. Manufacturer : Chaney Instrument Co. Address : Flat 09,19/F.,Metro Centre Phase I,32 Lam Hing Street, Kowloon Bay, Kowloon, Hong Kong Factory : Chaney Instrument Co. Address : Flat 09,19/F.,Metro Centre Phase I,32 Lam Hing Street, Kowloon Bay, Kowloon, Hong Kong Date of Test : Jul. 30, 2013 ~ Sep. 23, 2013 Test Item : ENGINEERING SAMPLE Standard(s) : FCC Part15, Subpart C(15.231)/ ANSI C63.4-2009 Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FICP-1-1307C343) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FICP-1-1307C343 Page 7 of 39 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part15, Subpart C (15.231) Standard(s) Section Test Item Judgment Remark 15.207 Conducted Emission - N/A RSS-210 2.7 Table 5 15.209 & 15.231(e) Radiated Spurious EmissionPASS RSS-210 A1.1.3 15.231(c) 20dB Occupied Bandwidth Measurement PASS NOTE: (1)” N/A” denotes test is not applicable in this test report. (2) EUT is used new battery. Neutron Engineering Inc. Report…

Text truncated - open the document above for the full version.