RNE3N1TXCA2WIRELESS SENSOR

INST - 00436 081012 Model:3N1TXCA2 This device complies with Part 15 of the FCC rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions

DATE˖2014-3-10 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:RNE3N1TXCA2
Product Name:WIRELESS SENSOR Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, we hereby request that the following documents be held confidential: Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 2014-3-10 By: Victor Mak Signature Printed Title: Project Manager - Digital Products On behalf of : Chaney Instrument Co. Telephone: +852-35829826

DATE: 2014-3-10 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Company name: Address: Neutron Engineering Inc. Ms. Cathy Wang No.3, JinShaGang 1 st City: Road, ShiXia, DaLang Townˈ Country: Dong Guan to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. China For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Company name:Chaney Instrument Co. Address: Flat 09,19/F.,Metro Centre Phase I,32 Lam Hing Street, Kowloon Bay, Kowloon, Hong Kong City:Kowloon, Hong Kong Country:China Dated this 2014-3-10 Agency agreement expiration date:Usually Give 8 - 12 Months By: Victor Mak Signature Printed Title: Project Manager - Digital Products On behalf of : Chaney Instrument Co. Telephone: +852-35829826

Chaney Instrument Co. Declaration of Product To whom it may concern: We, the undersigned, Name:Chaney Instrument Co. Address: Flat 09,19/F.,Metro Centre Phase I,, 32 Lam Hing Street, Kowloon Bay , City:Kowloon, Hong Kong Declare that: Product Name: WIRELESS SENSOR Model Name: 3N1TXCA2 Brand Name: ACURITE Hereby the product 00622as part of a system that operates with or is marketed with, mentioned in the user manual is only a receiver. on our behalf. Date:2014-3-10 City:Chaney Instrument Co. Name:Victor Mak Title:Project Manager - Digital Products Signature:

Neutron Engineering Inc. Project No.: 1402C175 Page 2 of 11 Neutron Engineering Inc. Project No.: 1402C175 Page 3 of 11 Neutron Engineering Inc. Project No.: 1402C175 Page 4 of 11

Colour: PMS WARM GRAY 10C Scale 1:1 Scale 4:1 PS-2N5 19-Mar-2014 Resourcefl Mind FCC ID: RNE 3N1TXCA2 MODEL : 3N1TXCA2 IC: 6608A- 3N1TXCA2 TX: DC 3.0V 4 x AA Made In China

Neutron Engineering Inc. Project No.: 1402C175 Page 5 of 11 Neutron Engineering Inc. Project No.: 1402C175 Page 6 of 11 Neutron Engineering Inc. Project No.: 1402C175 Page 7 of 11 Neutron Engineering Inc. Project No.: 1402C175 Page 8 of 11 Neutron Engineering Inc. Project No.: 1402C175 Page 9 of 11 Neutron Engineering Inc. Project No.: 1402C175 Page 10 of 11 Neutron Engineering Inc. Project No.: 1402C175 Page 11 of 11

Neutron Engineering Inc. Report No.: NEI-FICP-1-1402C175 Page 1 of 36 FCC&IC Radio Test Report FCC ID: RNE3N1TXCA2 IC: 6608A-3N1TXCA2 This report concerns (check one): Original Grant Class I Change Issued Date : Mar. 11, 2014 Project No. : 1402C175 Equipment : WIRELESS SENSOR Model Name : 3N1TXCA2 Applicant : Chaney Instrument Co. Address : Flat 09,19/F.,Metro Centre Phase I,32 Lam Hing Street, Kowloon Bay, Kowloon, Hong Kong Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Feb. 28, 2014 Date of Test: Feb. 28, 2014 ~ Mar. 07, 2014 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory: (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL: 0769-8318-3000 FAX: 0769-8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1402C175 Page 2 of 36 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1402C175 Page 3 of 36 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 10 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.4 DESCRIPTION OF SUPPORT UNITS 11 4 . EMC EMISSION TEST 12 4.1 CONDUCTED EMISSION MEASUREMENT 12 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 12 4.1.2 TEST PROCEDURE 12 4.1.3 DEVIATION FROM TEST STANDARD 12 4.1.4 TEST SETUP 13 4.1.5 EUT OPERATING CONDITIONS 13 4.1.6 EUT TEST CONDITIONS 13 4.1.7 TEST RESULTS 13 4.2 RADIATED EMISSION MEASUREMENT 14 4.2.1. FIELD STRENGTH OF FUNDAMENTAL EMISSIONS MEASUREMENT LIMIT 14 4.2.2. MEASURING INSTRUMENTS AND SETTING (FIELD STRENGTH OF FUNDAMENTAL 14 EMISSIONS) 14 4.2.3 RADIATED EMISSIONS MEASUREMENT 15 4.2.4. DWELL TIME OF PERIODIC OPERATION MEASUREMENT 16 4.2.5. TEST PROCEDURE 18 4.2.6. DEVIATION FROM TEST STANDARD 18 4.2.7. TEST SETUP 18 4.2.8. EUT OPERATING CONDITIONS 19 4.2.9. EUT TEST CONDITIONS 19 4.2.10 TEST RESULTS (BELOW 30MHZ) 20 4.2.11. TEST RESULTS (BETWEEN 30 – 1000 MHz) 21 4.2.12 TEST RESULTS (ABOVE 1000 MHz) 25 5. 20dB SPECTRUM BANDWIDTH MEASUREMENT 28 5.1.MEASURING INSTRUMENTS AND SETTING 28 5.2.TEST PROCEDURES 28 5.3. TEST SETUP LAYOUT 28 5.4. TEST DEVIATION 28 Neutron Engineering Inc. Report No.: NEI-FICP-1-1402C175 Page 4 of 36 Table of Contents Page 5.5. EUT OPERATION DURING TEST 28 5.6. EUT TEST CONDITIONS 28 5.7. TEST RESULT 29 6. TIMING TESTING 30 Limit 30 6.1.MEASURING INSTRUMENTS AND SETTING 30 6.2.TEST PROCEDURES 30 6.3. TEST SETUP LAYOUT 30 6.4. TEST DEVIATION 30 6.5. EUT OPERATION DURING TEST 30 6.6. EUT OPERATION DURING TEST 30 6.7. TEST RESULT 31 7. MEASUREMENT INSTRUMENTS LIST AND SETTING 33 8. EUT TEST PHOTO 34 Neutron Engineering Inc. Report No.: NEI-FICP-1-1402C175 Page 5 of 36 REPORT ISSUED HISTORY Issued No. Description Issued Date NEI-FICP-1-1402C175 Original Issue. Mar. 11, 2014 Neutron Engineering Inc. Report No.: NEI-FICP-1-1402C175 Page 6 of 36 1. CERTIFICATION Equipment : WIRELESS SENSOR Trade Name : ACURITE Model Name : 3N1TXCA2 Applicant : Chaney Instrument Co. Manufacturer : Chaney Instrument Co. Address : Flat 09,19/F.,Metro Centre Phase I,32 Lam Hing Street, Kowloon Bay, Kowloon, Hong Kong Factory : Chaney Instrument Co. Address : Flat 09,19/F.,Metro Centre Phase I,32 Lam Hing Street, Kowloon Bay, Kowloon, Hong Kong Date of Test : Feb. 28, 2014 ~ Mar. 07, 2014 Test Item : ENGINEERING SAMPLE Standard(s) : FCC Part15, Subpart C(15.231)/ ANSI C63.4-2009 Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FICP-1-1402C175) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FICP-1-1402C175 Page 7 of 36 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part15, Subpart C (15.231) Standard(s) Section Test Item Judgment Remark 15.207 Conducted Emission - N/A RSS-210 2.7 Table 5 15.209 & 15.231(e) Radiated Spurious EmissionPASS RSS-210 A1.1.3 15.231(c) 20dB Occupied Bandwidth Measurement PASS NOTE: (1)” N/A” denotes test is not applicable in this test report. (2) EUT is used new battery. Neutron Engineering Inc. Report No.: NEI-FICP-1-1402C175 Pag…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1402C175 Page 34 of 36 8. EUT TEST PHOTO Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1402C175 Page 35 of 36 Radiated Measurement Photos 30~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1402C175 Page 36 of 36 Radiated Measurement Photos Above 1000MHz