ROJ6390NAVTEX Receiver

i SAILOR 6390 Navtex Receiver User manual Document number: 98-137261-A Release date: October 16, 2013 98-137261.book Page i Wednesday, October 16, 2013 12:20 PM ii Disclaimer Any responsibility or liability for loss or damage in connection with the use of this product and the accompanying documentation is disclaimed by Thrane & Thrane A/S. The information in this manual is provided for information purposes only, is subject to change without notice and may contain errors or inaccuracies. Manuals issued by Thrane & Thrane A/S are periodically revised and updated. Anyone relying on this information should acquire the most current version e.g. from www.cobham.com/satcom or from the distributor. Thrane & Thrane A/S is not responsible for the content or accuracy of any translations or reproductions, in whole or in part, of this manual from any other source. Thrane & Thrane A/S is trading as Cobham SATCOM. Copyright © 2013 Thrane & Thrane A/S. All rights reserved. Trademark Acknowledgements •SAILOR is a registered trademark of Thrane & Thrane A/S in the European Union and the Unites States of America and other countries. •Other product and company names mentioned in this manual may be trademarks or trade names of their respective owners. •This product contains Android™ software. Android is a trademark of Google Inc. GPL notification The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. The verbatim licenses can be found online at: http://www.gnu.org/licenses/old-licenses/gpl-2.0.html http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html You may obtain the complete corresponding source code from us for a period of three years after our last shipment of this product, which will be no earlier than 2021, by sending a money order or check for DKK 50 to: SW Technology/GPL Compliance, Thrane & Thrane A/S, Lundtoftegaardsvej 93D 2800 Lyngby DENMARK Please write "source for product SAILOR 6390 Navtex Receiver" in the memo line of your payment. This offer is valid to anyone in receipt of this information. 98-137261.book Page ii Wednesday, October 16, 2013 12:20 PM iii Safety summary Observe the following general safety precautions during all phases of operation, service and repair of this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture and intended use of the equipment. Thrane & Thrane A/S assumes no liability for the customer's failure to comply with these requirements. Ground the equipment To minimise shock hazard, connect the SAILOR 6390 Navtex Receiver to an electrical ground and follow the cable instructions. Warranty limitation The SAILOR 6390 Navtex Receiver is not a user maintainable unit, and under no circumstances should the unit be opened beyond the outer plastic cover, except by authorized personnel. Unauthorized opening of the unit will invalidate the warranty. Installation and service Installation and general service must be done by skilled service personnel. The SAILOR 6390 Navtex Receiver is intended for use in a protected environment (-15° to +55°C) according to IEC-60945. Compass safe distance Compass safe distance: 20 cm (Standard magnetic compass), 20 cm (Emergency magnetic compass) from the SAILOR 6390 Navtex Receiver. 98-137261.book Page iii Wednesday, October 16, 2013 12:20 PM iv Preface Approvals and standard compliance SAILOR 6390 Navtex Receiver is approved to MED 2012/32/EU and fulfills the requirements in the following standards: IEC-60945 (2002), IEC-60945 Corrigendum 1 (2008), IEC- 61097-6 (2005-12), IEC-61162-1 (2010-11) (aligned with NMEA 0183 version 4.00), ITU-T X.27/V.11 (1996) The SAILOR 6390 Navtex Receiver is approved to SOLAS Regulations IV/7, IV/14: ITU-R M.540-2 (06/90) and ITU-R M.625-3 (10/95). The SAILOR 6390 Navtex Receiver is approved to FCC Equipment class: RNV, Part 80 NAVTEX Receiver 80.1101(c)(1). The approvals of the SAILOR 6390 Navtex Receiver are constantly monitored. New national approvals will be applied for and granted and new test standards may come into force. Therefore the above list may not be complete. Contact your authorized dealer for more information. About the manual Intended readers This manual is a user manual for the SAILOR 6390 Navtex Receiver system. This manual is intended for anyone who is using or intends to use this system. No specific skills are required to operate the SAILOR 6390 Navtex Receiver. However, it is important that you observe all safety requirements listed in the beginning of this manual, and operate the system according to the guidelines in this manual. Note that this manual does not cover installation of the system. For information on installation refer to the installation manual. Part numbers for related manuals are listed in the next section. 98-137261.book Page iv Wednesday, October 16, 2013 12:20 PM v Related documents The following table shows the documents related to this manual and to the SAILOR 6390 Navtex Receiver. Typography In this manual, typography is used as indicated below: Bold is used for the following purposes: •To emphasize words. Example: “Do not touch the antenna”. •To indicate what the user should select in the user interface. Example: “Select Settings”. Italic is used to emphasize the paragraph title in cross- references. Example: “For further information, see Connecting Cables on page...”. Title and descriptionDocument number SAILOR 6390 Navtex Receiver, Installation manual 98-139768 SAILOR 6004 Control Panel, Installation manual 98-136644 SAILOR 6390 Navtex Receiver, Installation guide 98-137263 98-137261.book Page v Wednesday, October 16, 2013 12:20 PM vi 98-137261.book Page vi Wednesday, October 16, 2013 12:20 PM vii Table of contents Chapter 1Introduction SAILOR 6390 Navtex Receiver ....................................................... 1 Navtex message (example) .............................................................. 3 Use sce…

Text truncated - open the document above for the full version.

SAILOR 6390 Navtex Receiver Installation manual Document number: 98-139768-A Release date: October 25, 2013 ii98-139768-A Disclaimer Any responsibility or liability for loss or damage in connection with the use of this product and the accompanying documentation is disclaimed by Thrane & Thrane A/S. The information in this manual is provided for information purposes only, is subject to change without notice and may contain errors or inaccuracies. Manuals issued by Thrane & Thrane A/S are periodically revised and updated. Anyone relying on this information should acquire the most current version e.g. from www.cobham.com/satcom or from the distributor. Thrane & Thrane A/S is not responsible for the content or accuracy of any translations or reproductions, in whole or in part, of this manual from any other source. Thrane & Thrane A/S is trading as Cobham SATCOM. Copyright © 2013 Thrane & Thrane A/S. All rights reserved. Trademark acknowledgements •SAILOR is a registered trademark of Thrane & Thrane A/S in the European Union, the United States of America and other countries. • Other product and company names mentioned in this manual may be trademarks or trade names of their respective owners. • This product contains Android™ software (a Google Inc. trademark). GPL notification The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. The verbatim licenses can be found online at: http://www.gnu.org/licenses/old-licenses/gpl-2.0.html http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html You may obtain the complete corresponding source code from us for a period of three years after our last shipment of this product, which will be no earlier than 2021, by sending a money order or check for DKK 50 to: SW Technology/GPL Compliance, Thrane & Thrane A/S, Lundtoftegaardsvej 93D 2800 Lyngby DENMARK Please write "source for product SAILOR 6390 Navtex Receiver" in the memo line of your payment. This offer is valid to anyone in receipt of this information. 98-139768-Aiii Safety summary Observe the following general safety precautions during all phases of operation, service and repair of this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture and intended use of the equipment. Thrane & Thrane A/S assumes no liability for the customer's failure to comply with these requirements. Ground the equipment To minimise shock hazard, connect the SAILOR 6390 Navtex Receiver to an electrical ground and follow the cable instructions. Warranty limitation The SAILOR 6390 Navtex Receiver is not a user maintainable unit, and under no circumstances should the unit be opened beyond the outer plastic cover, except by authorized personnel. Unauthorized opening of the unit will invalidate the warranty. Installation and service Installation and general service must be done by skilled service personnel. The SAILOR 6390 Navtex Receiver is intended for use in a protected environment (-15° to +55°C) according to IEC-60945. Compass safe distance Compass safe distance: 20 cm (Standard magnetic compass), 20 cm (Emergency magnetic compass) from the SAILOR 6390 Navtex Receiver. iv98-139768-A Preface Approvals and standard compliance SAILOR 6390 Navtex Receiver is approved to MED 2012/32/EU and fulfills the requirements in the following standards: IEC-60945 (2002), IEC-60945 Corrigendum 1 (2008), IEC-61097-6 (2005-12), IEC-61162-1 (2010-11) (aligned with NMEA 0183 version 4.00), ITU-T X.27/V.11 (1996) The SAILOR 6390 Navtex Receiver is approved to SOLAS Regulations IV/7, IV/14: ITU-R M.540-2 (06/90) and ITU-R M.625-3 (10/95). The SAILOR 6390 Navtex Receiver is approved to FCC Equipment class: RNV, Part 80 NAVTEX Receiver 80.1101(c)(1). The approvals of the SAILOR 6390 Navtex Receiver are constantly monitored. New national approvals will be applied for and granted and new test standards may come into force. Therefore the above list may not be complete. Contact your authorized dealer for more information. Record of Revisions Rev.DescriptionRelease DateInitials AOriginal document25 October 2013UFO 98-139768-Av Table of contents Chapter 1About this manual 1.1Intended readers ..............................................................................................................1-1 1.2Manual overview ...............................................................................................................1-1 1.3Related documentation ...............................................................................................1-1 1.4Precautions ............................................................................................................................1-2 Chapter 2Introduction 2.1Introduction to Navtex ...............................................................................................2-1 2.1.1Overview ..................................................................................................................................2-1 2.1.2Features ...................................................................................................................................2-2 2.1.3Connector overview ..........................................................................................................2-2 2.2Navtex message (example) .......................................................................................2-3 2.3System components .......................................................................................................2-3 2.3.1Use with the SAILOR 6004 Control panel ...............................................................2-4 2.3.2Use as a stand-alone unit with an INS ......................................................................2-4 2.4Part numbers ........................................................................................................................2-4 Chapter 3Installation 3.1Unpacking and initial …

Text truncated - open the document above for the full version.

mea Marine Equipment Directive Module B Type Examination Certificate BBT This is to certify that TUV SÜD BABT did undertake the relevant type approval procedures for the equipment identified below which was found to be in compliance with the Radio requirements of Marine Equipment Directive 96/98/EC as amended by Commission Directive 2011/75/EU and that the equipment of Thrane & Thrane A/S of Lundtoftegaardsvej 93 D DK-2800 Kgs. Lyngby Denmark known as SAILOR 6390 & SAILOR 6391 conform to the relevant requirements for the following equipment as listed in Marine Equipment Directive Annex A.1: Annex A.115.3 Navtex Receiver as defined in Commission Directive 2011/75/EU on the basis of the Technical Data and information detailed in the Annex to this certificate. Signed: Issue Dale: 11 November2013 This certificate is valid from 11 November 2013 until not later than 10 November 2018 The Conditions for the validity of this certificate are listed in the Annex. For further details related to this certification please contact [email protected] TÜV SÜD BAST • TOy SÜD Group Octagon House • Concorde Way • Fareham • Hampshire • P015 5RL • united Kingdom On Behalf of TUV SÜD BABT Number: BABT-MED000058 Issue: 01 This certificate has been issued in accordance with the Certification Regulations of TUV SÜD BABT (Notified Body Number 0168) and constitutes page 1 of the combined Certificate and Annex 0168 Annex to BA3BT Marine Equipment Directive Module B Type Examination Certificate Description of Equipment Navtex Receiver Models: SAILOR 6390 Navtex Receiver* Note 1 SAILOR 6391 Navtex System* Note 2 System Components: SAILOR 6390 SAILOR 6391 SAILOR 6390 (fl-6390A) Navtex Receiver X X SAILOR 6004 (fl-6004A) bontroi Panel - X *SAILOR is the brand Thrane & Thrane A/S. name for Cobham SATCOM maritime products manufactured by Compliance Matrix For MED Item A.1/5.3 IMO Resolutions International Testing Standards Global maritime distress and safety system (GMDSS) — IEC 61097-6 Ed.2 (2005) Part 6: Narrowband direct-printing telegraph equipment for MO Res MSC148(77) (Inc. Amendment 1:2011) the reception of navigational and meteorological warnings ITU-R M. 540-2 and urgent information to ships (NAVTEX) ITU-R M. 625-3 IEC 61 162-1 Ed 2 Maritime navigation and radiocommunication equipment 12010** and systems — Digital interfaces Part 1: Single talker and ‘ I multiple listeners IEC 60945 Ed.4 (2002) . IMO Res. A.694(17) (Inc. Cowl :2008) General Requirements for Marine Navigation Equipment **As required by lEO 61097-6:2005 Manufacturer: N a me: Address: As Holder As Holder Annex to Marine Equipment Certificate number: BABT-MED00005B Annex Issue number 01.01 Page 2 of 4 Relevant Technical Documentation Supplier’s Declaration(s) of Conformity: DOC for wheelmark equipment 99-11 3177-M DRAFT, 2013-10-24 BA3BT User Guide: SAILOR 6390 Navtex Receiver User Manual, Document No. 98-1 37261-A (Draft), 2013-10-11 SAILOR 6390 Navtex Receiver Installation Manual, Document No. 98-139768-A, 2013-10-25 Approved Software: lEO 61097-6 (2005): (Inc. Amendment 1:2011) lEO 60945 (2002): inc Corr 1 (2008) IEC 61162-1 (2010): Version 1 02Note 3 75923004 Report 04 Issue 2, 2013-11-08 75923004 Report 01 Issue 2, 75923004 Report 03 Issue 2, E12207.00, 2012-11-19 Corrosion statement Sailor 6391 Navtex System, 2013-08-08 75923004 Report 02 Issue 12013-10-30 Approved Hardware: NOTES:- Rev. B Circuit Diagram: Parts List: 93-135754-B, 2013-03-21 93-135992-B, 2012-10-04 4O639OANavtexBOM.xls, 2013-10-21 BOM 6004 CPU-B, 201 3-05-29 BOM 6004 SMPS-B, 2013-05-29 1 The SAILOR 6390 works as a stand-alone unit and can be used as part of an Integrated Navigation System, however this approval does not cover INS operation. 2 The SAILOR 6391 comprises of radio receivers, signal processors, a dedicated display, printer output port and non-volatile memory in line with IMO Res.MSC.148(77), 3 This approval remains valid for equipment including subsequent minor software amendments which have been formally accepted in accordance with the Certification Regulations of TUV SÜD BABT. Annex to Marine Equipment Certificate number BABT-MED000058 Test report numbers: 2013-11-062013-11-08 Annex Issue number 01.01 Page 3 of 4 Conditions of Validity B&BT This issue of the Annex to the referenced Marine Equipment Module B Certificate relates to Issue 1 of the Certificate. The assessed equipment is also in compliance with Directive 96/98/EC as amended by Commission Directive 2012/32/EU, this Module B Certificate is also valid under that amendment. This certificate will not be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with TUV SÜD BABT or a person appointed by TUV SOD BABT to perform that role. Should the specified regulations or standards be amended during the validity of this certificate, the product(s) is/are to be reapproved prior to it/them being placed on board vessels to which the amended regulations or standards apply. The Mark of Conformity may only be affixed to the above type approved equipment and a Manufacturer’s Declaration of Conformity issued when the production-control phase module (D, E, or F) of ANNEX B of the Directive is fully complied with and controlled by a written inspection agreement with a notified body.” Annex to Marine Equipment Certificate number: BABT-MED00005B Signed on behalf of TÜV SÜD BABT Date:.1).i,.t1%ksnkM..ZQ11. Annex Issue number 01.01 Page 4 of 4

TÜV SÜD BABT Octagon House Concorde Way Segensworth North Fareham Hampshire PO15 5RL Model FCC ID IC ID Date TT-6390A ROJ6390 N/A 13 th November 2013 Confidentiality Request Dear Sir Madame: Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Schrader Electronics Ltd hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematic , Parts List, Operational description In accordance with the FCC Public Notice dated June 15, 2004 (DA 04-1705), we hereby request short-term 180 days confidentiality for the following items prior to marketing the device: Test Setup Photos External Photos Internal Photos Operation Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely Morten B. Saul Development Engineer,

TÜV SÜD BABT Octagon House Concorde Way Segensworth North Fareham Hampshire PO15 5RL Model FCC ID IC ID Date TT-6390A ROJ6390 N/A 13 th November 2013 Confidentiality Request Dear Sir Madame: Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Thrane & Thrane A/S trading as Cobham SATCOM, hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematic , Parts List, Operational description Functional description In accordance with the FCC Public Notice dated June 15, 2004 (DA 04-1705), we hereby request short-term 180 days confidentiality for the following items prior to marketing the device: Test Setup Photos External Photos Internal Photos Operation Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely Morten B. Saul Development Engineer,

PICTURES OF NAVTEX RECEIVER SAILOR 6390 Manufacturer Thrane & Thrane A/S Country of origin Denmark Technical Description Pictures of Navtex Receiver Model No TT-6390A Part No 406390A Serial No Signature Erik Andersen Date 2013-10-17 TOP VIEW REAR VIEW RIGHT SIDE VIEW BOTTOM SIDE VIEW COVER DISMOUNTED & RF SHIELD MOUNTED COVER & RF SHIELD DISMOUNTED

2D DATAMATRIX 5704702737893:"Serial Number" Ex. 5704702737893:1234560001 Produced Year/Week Ex. 2013/49 This number must be change every new year 2013 - 13, 2014 - 14 etc. Serial Number YYYY/WW SAILOR 6390 Navtex Receiver S/N xxxxxxxxxx P/N 406390A Thrane & Thrane A/S, Denmark 0575 - 13 YYYY/WW SAILOR 6390 Navtex Receiver S/N xxxxxxxxxx P/N 406390A Model: TT-6390A Thrane & Thrane A/S, Denmark 0575 - 13 12-24 VDC / 1A Model: TT-6390A FCC ID: ROJ6390 FCC ID: ROJ6390 12-24 VDC / 1A FIRST ANGLE PROJECTION 99-137283 Layout, Type Label TT-6390A, 406390A A4 LTRDESCRIPTIONDATEAPPROVAL REVISIONS ORIGINALA-- SIZECODE IDENT NO.DRAWING NO. SHEET 1 OFSCALE MATERIAL LIN. DIM. ANGLES AP. AP. CH. DR. TITLE 12.10.23 1:1 48-124727- Part number Jesper Holst Connie Madsen 13.06.04 13.06.04 1 Connie Madsen UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETRE AND TOLERANCES ARE IN ACCOR- DANCE WITH DS 22768-1-m. Black print. Telecommunications Engineering CopenhagenDenmark

RIGHT SIDE VIEW BOTTOM SIDE VIEW

406390A-00500 Sailor 6390 Navtex Receiver 406390A Navtex Receiver Assembly Instruction Document number: 97-138962-A Date: 22 May 2013 Author: HNI Printed version of this document is only valid if lifecycle is indicated as released in the top banner Copyright © Thrane & Thrane A/S trading as Cobham SATCOM Lundtoftegaardsvej 93D, DK-2800 Kgs. Lyngby, Denmark ALL RIGHTS RESERVED Filename: 97-138962A_Sailor 6390 Navtex Receiver REVISION HISTORY Rev. Date App. Section Description / Remarks A 22-05-13 HNI 1 st version.  Thrane & Thrane A/S This Document and any other appended documents and drawings are of  copyright to Thrane & Thrane A/S. It contains proprietary information which is disclosed for information purposes only. The contents of this document shall not in whole or in part be used for any other purpose; be disclosed to any member of the recipients organisation not having a need to know such information or to any third party, individual, organisation or Government; be stored in any retrieval system or be produced or transmitted in any form by photocopying or any optical, mechanical or other means without prior permission of Thrane & Thrane A/S. 406390A-00500 Sailor 6390 Navtex Receiver 406390A Navtex Receiver 97-138962-A Assembly Instruction 22 May 2013 Page ii of ii Table of Contents Table of Contents ................................................................................................................... ii 1. Overview ........................................................................................................................ 1 2. Tooling list ...................................................................................................................... 1 3. Extra materials ............................................................................................................... 1 4. Enclose .......................................................................................................................... 1 5. Reference documents .................................................................................................... 1 6. General guidelines ......................................................................................................... 1 7. Navtex receiver assembly. ............................................................................................. 2 7.1. Assembly of Navtex chassis. .................................................................................... 2 7.2. Shield assembly. ...................................................................................................... 4 7.3. Mounting of ground screws. ...................................................................................... 5 7.4. Navtex Unit Test. ...................................................................................................... 6 7.5. Cover assembly. ....................................................................................................... 6 7.6. Place type label. ....................................................................................................... 8 7.7. Further handling. ...................................................................................................... 9 406390A-00500 Sailor 6390 Navtex Receiver 406390A Navtex Receiver 97-138962-A Assembly Instruction 22 May 2013 Page 1 of 9 1. Overview This instruction describes in pictures and words, how to assemble Sailor 6390 Navtex Receiver. 2. Tooling list #T1: El-screwdriver 0.8 Nm ± 0.1Nm. Torx 10 and 20. Rotational speed: 600 ±50 rpm. #T2: El-screwdriver 1.15 Nm ± 0.1Nm. Special nut tool for TNC connector. 3. Extra materials #M1: Type label part no. 48-124727. 4. Enclose #E1: 5. Reference documents #R1: Test Instruction, Navtex Unit Test part no. 96-139310. 6. General guidelines Assembly must take place in an antistatic environment. All soldering irons must be connected to earth (GND) and persons handling PCBs and components must use antistatic bracelets or similar protection. All assembly has to follow the standard IPC-A-610D. Important: This instruction is the basis for all local instructions. All pictures and illustrations must be reproduced in colours to show the details. 406390A-00500 Sailor 6390 Navtex Receiver 406390A Navtex Receiver 97-138962-A Assembly Instruction 22 May 2013 Page 2 of 9 7. Navtex receiver assembly. 7.1. Assembly of Navtex chassis. Place Navtex Main Unit part no. 60-135754 on Chassis for Navtex Receiver part no. 41-136668. Make sure the two chassis guide pins are aligned with the two main unit holes. Figure 1 Mount 3 x screw part no. 51-205390-308 to fixate main unit on the chassis. #T1: El-screwdriver 0.8 Nm ± 0.1 Nm Torx 10. Rotational speed: 600 ±50 rpm. Figure 2 Place Connector Base part no. 41-136674 on TNC connector J6. Figure 3 406390A-00500 Sailor 6390 Navtex Receiver 406390A Navtex Receiver 97-138962-A Assembly Instruction 22 May 2013 Page 3 of 9 Fixate the connector base with 2 x screw part no. 51-205390-308. Make sure the connector base still is loose after applying the two screws. Figure 4 Tighten TNC connector nut. #T2: El-screwdriver 1.15 Nm ± 0.1 Nm. Special nut tool for TNC connector. Figure 5 Tighten the two screws. #T1: El-screwdriver 0.8 Nm ± 0.1 Nm Torx 10. Rotational speed: 600 ±50 rpm. Figure 6 406390A-00500 Sailor 6390 Navtex Receiver 406390A Navtex Receiver 97-138962-A Assembly Instruction 22 May 2013 Page 4 of 9 7.2. Shield assembly. Place Shield for Navtex part no. 41-136670 on Navtex main unit. Figure 7 Mount 2 x screw part no. 51-205390-308 to fixate shield on the chassis. Make sure the shield is still loose after applying the screws. Figure 8 Mount 17 x screw part no. 51-205390-308 on the shield. Make sure to follow the order, starting with screw marked as number 1. #T1: El-screwdriver 0.8 Nm ± 0.1 Nm Torx 10. Rotational speed: 600 ±50 rpm. Figure 9 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 406390A-00500 Sailor 6390 Navtex Receiver 406390A Navtex Receiver…

Text truncated - open the document above for the full version.

Document 75923004 Report 01 Issue 2 November 2013 Report On Type Approval Testing of the Thrane & Thrane A/S SAILOR 6390 Navtex Receiver In accordance with IEC 60945 TÜV SÜD Product Service, Octagon House, Concorde Way, Segensworth North, Fareham, Hampshire, United Kingdom, PO15 5RL Tel: +44 (0) 1489 558100. Website: www.tuv-sud.co.uk Document 75923004 Report 01 Issue 1 Page 1 of 60 This report has been up-issued to Issue 2 to include the Operational Checks section. REPORT ON Type Approval Testing of the Thrane & Thrane A/S SAILOR 6390 Navtex Receiver Document 75923004 Report 01 Issue 2 November 2013 PREPARED FOR Thrane & Thrane A/S Lundtoftegaardsvej 93 D DK-2800 Kgs. Lyngby Denmark PREPARED BY Sarah Jones Project Engineer APPROVED BY Richard Thompson Authorised Signatory Mark Jenkins Authorised Signatory David Guyett- Smith Authorised Signatory DATED 06 November 2013 Document 75923004 Report 01 Issue 1 Page 2 of 60 CONTENTS Section Page No 1 REPORT SUMMARY .................................................................................................................. 3 1.1 Introduction .................................................................................................................................. 4 1.2 Brief Summary of Results ............................................................................................................ 5 1.3 Declaration of Build ...................................................................................................................... 6 1.4 Product Information ..................................................................................................................... 7 1.5 Deviations .................................................................................................................................... 7 1.6 Performance Monitoring .............................................................................................................. 7 1.7 Modifications ................................................................................................................................ 8 1.8 Report Modification Record ......................................................................................................... 8 2 TEST DETAILS ........................................................................................................................... 9 2.1 Operational Checks ................................................................................................................... 10 2.2 Power Supply ............................................................................................................................. 17 2.3 Dry Heat Test – Functional ...........................................…

Text truncated - open the document above for the full version.