ROR00000007tri-sector Long-Term Evolution (LTE) Evolved Node B (eNB)

BLINQ WIRELESS INC. NON-DISCLOSURE AGREEMENT (Mutual) 2015 THIS AGREEMENT is entered into, by and between BLiNQ Wireless Inc., 140 Renfrew Drive, Suite 205, Markham, ON L3R 6B3, Canada (“BLiNQ”) and ________________ (“Company”), with offices at ___________________ (“Company”). As BLiNQ and Company recognizes that there is a need to disclose to each other certain confidential information, and to provide for mutual agreements to protect such confidential matters, BLINQ and Company agree as follows:  Information in writing (orally disclosed material must be summarized within thirty (30) days of disclosure in writing) designated as “Confidential” or “Proprietary,” including, but not limited to, product planning information, product specifications, and other proprietary and trade secret business and technical information, shall be held in strictest confidence and not disclosed to any third parties. BLINQ and Company mutually agree they may disclose such information to responsible employees with a bona fide need to know, provided all such employees are instructed not to disclose such information to third parties. Each party agrees to exercise reasonable care, consistent with its protection of its own confidential information, to prevent such use or disclosure to third parties.  Each party shall not use this information for any commercial purpose other than for general product planning purposes without the prior written permission of the other party.  Information shall not be deemed confidential and the receiving party shall have no obligation regarding any information which is already known to the receiving party at the time it is disclosed, is or becomes publicly known through no wrongful act of the receiving party, is rightfully received from a third party without restriction on disclosure and without breach of this Agreement, is independently developed by the receiving party, is furnished to a third party by the disclosing party without similar restriction on disclosure, or is disclosed pursuant to a requirement of a government agency, court order, or otherwise by law.  All confidential information shall remain the property of the disclosing party, and upon written request of either party, the other party shall return all confidential information disclosed and all copies thereof. Nothing contained in this agreement shall be construed as granting any rights, by license or otherwise, to any confidential information disclosed. All confidential information is provided “as is.” Each party makes no warranties, express, implied, or otherwise, regarding its accuracy, completeness or performance.  This agreement shall not be assignable by either party without the written consent of the other party. This document constitutes the entire agreement between the parties with respect to disclosure of confidential information, and shall supersede all previous communications, representations, understandings and agreements, either oral or written, between the parties or any official or representative thereof. Any changes to this agreement must be in writing and signed by authorized principals on both sides.  Unless earlier terminated by written agreement of both parties, this agreement shall remain in effect for five (5) years from the date as executed below by duly authorized representatives.  The laws of the Province of Ontario shall govern this agreement, without reference to conflict of law principles, and shall be effective on the last of the dates indicated below. BLiNQ Wireless Inc. ____________________________________ Signed: ________________________________ Signed: __________________________________ Name: _________________________________ Name: ___________________________________ Title: __________________________________ Title: _____________________________________ Date: __________________________________ Date: _____________________________________

Page υ of χ Section λ. External photos λ.λ Top front view External photos NEX‐391430 Page φ of χ λ.μ Top rear view Page χ of χ λ.ν Bottom view

38.1mm 1.500in 12.7mm .500in A03 NOTES: 1. DIMENSIONS IN DUAL UNITS MILLIMETERS [INCHES]. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1994. 2. ZEBRA WHITE LABEL ROLL SPEC: - TYPE: ZEBRA Z-ULTIMATE 3000T - ZEBRA PART NUMBER: 10011693 - SIZE: 1.5" W X 0.5" L - QTY: 9420 LABELS PER ROLL 3. ZEBRA RESIN RIBBON SPEC: - TYPE: 5095 HIGH-PERFORMANCE - SIZE: 2.36" X 1476', (60mm X 450m) - PART NUMBER: 05095BK06045 REVISIONS REV.DESCRIPTIONDATEAPPROVED A01INITIAL DRAWING RELEASE12/15/2020BM A02 REMOVED -K FROM MANUFACTURER'S NUMBER (MN) 1/31/2020BM A03ADDED FCC ID NUMBER5/5/2020BM BQF00283-001 PART NUMBERREVISION X300i 1 OF 1 SHEET TECH AUTH DESIGNER CHECKED BY DRAWN BY DATE DATE DATE 5/5/2020 PROPRIETARY AND CONFIDENTIAL LICENSE LABEL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF . ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF IS PROHIBITED. SIZE B DIMENSIONS ARE IN TOLERANCES: FRACTIONAL ANGULAR: MACH NONE .X .XX .XXX UNLESS OTHERWISE SPECIFIED TOLERANCES SCALE DATE BMARJANOVIC A03 12 34 87 65 A B C D 1:1

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Maximum peak output power at device output terminal:18.53dBm Cable and Jumper loss:0.0dB Maximum peak output power at antenna input terminal:18.53dBm 71.28530301mW Single Antenna gain (typical):12dBi Number of Antennae:1 Total Antenna gain (typical):12dBi 15.84893192(numeric) Prediction distance:30cm Prediction frequency:3625MHz MPE limit for uncontrolled exposure at prediction frequency:1mW/cm 2 Power density at prediction frequency:0.099896 mW/cm 2 0.998959W/m 2 Tx On time:1.000000ms Tx period time:1.000000ms Average Factor:100.000000% Average Power density at prediction frequency:0.998959W/m 2 Maximum allowable antenna gain:22.00452373dBi Margin of Compliance:10.00452373 dB 2 4R PG S  

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation FCC Part 96, Date: October 2018 MRA il ac SCC Accredited LAB LAB Accrédité CCN TM Choose Scandinavian trust Wireless Test Report- 391430-1TRFWL 376463-1TRFWL Date of issue: April 30, 2020 Applicant: Blinq Wireless, Inc Product: Base station Model: X3I-35 FCC ID: ROR0000007 Specifications:  FCC 47 CFR Part 96 Citizens Broadband Radio Service Report reference ID:376463-1TRFWL Page 2 of 40 Test location Company name Nemko Canada Inc. Facilities Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Test site registration Organization Recognition numbers and location FCC/ISED CA2040 (Ottawa/Almonte); CA2041 (Montreal); CA0101 (Cambridge) Website www.nemko.com Tested by Fahar Abdul Sukkoor Reviewed by Mark Libbrecht Date April 30, 2020 Signature of reviewer Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID:376463-1TRFWL Page 3 of 40 Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Applicant and manufacturer .................................................................................................................................................................................... 4 1.2 Test specifications .................................................................................................................................................................................................... 4 1.3 Test method ............................................................................................................................................................................................................. 4 1.4 Statement of compliance ......................................................................................................................................................................................... 4 1.5 Exclusions ................................................................................................................................................................................................................. 4 1.6 Test report revision history ...................................................................................................................................................................................... 4 Section 2. Summary of test results ....................................................................................................................................................................... 5 2.1 FCC Part 96 test results ............................................................................................................................................................................................ 5 Section 3. Equipment under test (EUT) details ..................................................................................................................................................... 6 3.1 Sample information .................................................................................................................................................................................................. 6 3.2 EUT information ....................................................................................................................................................................................................... 6 3.3 Technical information .............................................................................................................................................................................................. 6 3.4 Product description and theory of operation ........................................................................................................................................................... 7 3.5 EUT exercise details .................................................................................................................................................................................................. 7 3.6 EUT setup diagram ................................................................................................................................................................................................... 7 3.7 EUT sub assemblies .................................................................................................................................................................................................. 7 Section 4. Engineering considerations .........................................................................................................…

Text truncated - open the document above for the full version.

Testing Laboratory Certificate #2955.02 Page 1 of 167Report Issued: 11/12/2018Report File #: 7169004795-CBRS-002 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc Test Report As per FCC Part 96 SAS requirements (CBRS Test Plan) on the FW-300i Intelligent LTE Base Station (3550-3700MHz) FCC ID: ROR00000005 Issued by: TÜV SÜD Canada Inc. 2972 Joseph-A-Bombardier Laval, QC, H7P 6E3 Canada Ph: (450) 687-4976 Testing produced for Blinq Wireless See Appendix A for full client & EUT details. Scott Drysdale. Test Personnel Abderrahmane Ferhat Report Reviewer Canada Client Blinq Wireless Product FW-300i Intelligent LTE Base Station (3550- 3700MHz) Standard(s) FCC Part 96 SAS requirements (CBRS Test Plan) Page 2 of 167Report Issued: 11/12/2018Report File #:7169004768-CBRS-002 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Table of Contents Table of Contents ............................................................................................................................ 2 Report Scope ................................................................................................................................... 3 Summary ......................................................................................................................................... 4 Test Results Summary ................................................................................................................ 5 Notes, Justifications, or Deviations .......................................................................................... 10 Applicable Standards, Specifications and Methods...................................................................... 11 Document Revision Status ............................................................................................................ 12 Definitions and Acronyms ............................................................................................................ 13 Testing Facility ............................................................................................................................. 14 Calibrations and Accreditations ................................................................................................ 14 Testing Environmental Conditions and Dates .......................................................................... 15 Detailed Test Results Section ....................................................................................................... 16 Check the device registration and authorization with the SAS................................................. 82 Confirm that the device changes its operating power and/or channel in response to a command from the SAS and Confirm that the device correctly configures based on the different license classes. ...................................................................................................................................... 82 Confirm that the device transmits at a power level less than or equal to the maximum power level approved by the SAS...................................................................................................... 148 WINNF Security Test Case Analysis ......................................................................................... 150 WINNF.FT.C.SCS.1 ............................................................................................................... 150 WINNF.FT.C.SCS.2 ............................................................................................................... 154 WINNF.FT.C.SCS.3 ............................................................................................................... 157 WINNF.FT.C.SCS.4 ............................................................................................................... 159 WINNF.FT.C.SCS.5 ............................................................................................................... 161 Appendix A – EUT & Client Provided Details .......................................................................... 163 Technical Description ............................................................................................................. 165 Appendix B – EUT, Peripherals, and Test Setup Photos............................................................ 166 Client Blinq Wireless Product FW-300i Intelligent LTE Base Station (3550- 3700MHz) Standard(s) FCC Part 96 SAS requirements (CBRS Test Plan) Page 3 of 167Report Issued: 11/12/2018Report File #:7169004768-CBRS-002 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Report Scope This report addresses the EMC verification testing and test results ofFW-300i Intelligent LTE Base Station (3550-3700 MHz)herein referred to as EUT (Equipment Under Test). The EUT was tested for compliance against the following standards: FCC Part 96 SAS requirements (CBRS Test Plan) . Test procedures, results, justifications, and engineering considerations, if any, follow later in this report. For a more detailed list of the standards and the revision used, see the "Applicable Standards, Specifications and Methods" section of this report. This report does not imply product endorsement by any government, accreditation agency, or TÜV SÜD Canada Inc. Opinions or interpretations expressed in this report, if any, are outside the scope of TÜV SÜD Canada Inc accreditations. Any opinions expressed do not necessarily reflect the opinions of TÜV SÜD Canada Inc, unless otherwise stated. Client Blinq Wireless Product FW-300i Intelligent LTE Base Station (3550- 3700MHz) Standard(s) FCC Part 96 SAS requirements (CBRS Test Plan) Page 4 of 167Report Issued: 11/12/2018Report File #:7169004768-CBRS-002 © TÜV SÜD Canada Inc. This test report shall not be reproduced except i…

Text truncated - open the document above for the full version.

Page υ of ψ Section λ. Setup photos λ.λ Radiated Front view Setup photos NEX‐391430 Page φ of ψ λ.μ Radiated back view Page χ of ψ λ.ν Conducted emissions Page ψ of ψ λ.ξ Conducted emissions