RR7BT-005Bluetooth Headset

FCC ID: RR7BT-005 No SAR Evaluation Required if power is below the following threshold: Tunable Range F(GHz) Low F(GHz) High Center of Tunable Band (GHz) 60/f SAR Limitation mW 2.402 2.480 2.441 24.19 Maximum measured transmitter power: Pout Conducted (mW) Maximum Antenna Gain dBi Pout EIRP (mW) 3.71 2 8.86 Threshold for no SAR evaluation is 24.19 mW Maximum TX Power is 3.71 mW Conducted and 8.86 mW EIRP Conclusion: No SAR evaluation required since maximum Transmitter Pout (both conducted and EIRP) is below FCC threshold

FCC ID: RR7BT-005 Report No.: 060720FIA01 1 Report Format Version 1.0.0 FCC TEST REPORT REPORT NO.: 060720FIA01 MODEL NO.: GW-BT-005 RECEIVED: Jul. 17, 2006 TESTED: Jul. 17 ~ Aug. 11, 2006 ISSUED: Aug. 11, 2006 APPLICANT: GREAT WELL ELECTRONIC LIMITED ADDRESS: The Third Industrial Area, Guanlan Town, Shenzhen City, China ISSUED BY: ADT (Shanghai) Corporation ADDRESS: 2F, Building C, No.1618, Yishan Rd., 201103, Shanghai, China This test report consists of 44 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by A2LA or any government agencies. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. This report contains data that were produced under Laboratory ADT (Shanghai) Corporation. ADT (Shanghai) Corporation. FCC ID: RR7BT-005 Report No.: 060720FIA01 2 Report Format Version 1.0.0 TABLE OF CONTENTS 1. CERTIFICATION ..........................................................................................................4 2. SUMMARY OF TEST RESULTS..................................................................................5 2.1 MEASUREMENT UNCERTAINTY ..............................................................................6 3. GENERAL INFORMATION ..........................................................................................7 3.1 GENERAL DESCRIPTION OF EUT............................................................................7 3.2 DESCRIPTION OF TEST MODES..............................................................................8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .........................................................8 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ..............................9 3.2.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................... 11 3.2.4 DESCRIPTION OF SUPPORT UNITS ...................................................................... 11 4. TEST TYPES AND RESULTS....................................................................................12 4.1 CONDUCTED EMISSION MEASUREMENT ............................................................12 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT..........................................12 4.1.2 TEST RESULTS ........................................................................................................12 4.2 RADIATED EMISSION MEASUREMENT .................................................................13 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...............................................13 4.2.2 TEST INSTRUMENTS ..............................................................................................14 4.2.3 TEST PROCEDURES ...............................................................................................15 4.2.4 DEVIATION FROM TEST STANDARD .....................................................................15 4.2.5 TEST SETUP ............................................................................................................16 4.2.6 EUT OPERATING CONDITIONS ..............................................................................16 4.2.7 TEST RESULTS ........................................................................................................17 4.3 NUMBER OF HOPPING FREQUENCY USED .........................................................21 4.3.1 LIMIT OF HOPPING FREQUENCY USED ...............................................................21 4.3.2 TEST INSTRUMENTS ..............................................................................................21 4.3.3 TEST PROCEDURES ...............................................................................................21 4.3.4 DEVIATION FROM TEST STANDARD .....................................................................21 4.3.5 TEST SETUP ............................................................................................................21 4.3.6 TEST RESULTS ........................................................................................................22 4.4 DWELL TIME ON EACH CHANNEL .........................................................................24 4.4.1 LIMIT OF DWELL TIME USED..................................................................................24 4.4.2 TEST INSTRUMENTS ..............................................................................................24 4.4.3 TEST PROCEDURES ...............................................................................................24 4.4.4 DEVIATION FROM TEST STANDARD .....................................................................25 4.4.5 TEST SETUP ............................................................................................................25 4.4.6 TEST RESULTS ........................................................................................................26 4.5 CHANNEL BANDWIDTH...........................................................................................30 4.5.1 LIMITS OF CHANNEL BANDWIDTH ........................................................................30 FCC ID: RR7BT-005 Report No.: 060720FIA01 3 Report Format Version 1.0.0 4.5.2 TEST INSTRUMENTS ..............................................................................................30 4.5.3 TEST PROCEDURE .................................................................................................30 4.5.4 DEVIATION FROM TEST STANDARD .....................................................................30 4.5.5 TEST SETUP ............................................................................................................31 4.5.6 EUT OPERATING CONDITION .............................................................…

Text truncated - open the document above for the full version.