RWO-517Wireless Dongle

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 20-Feb--2023 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: RWO Razer Inc. (“the applicant”) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0022386734 Name: Razer Inc. Address: 9 Pasteur, Suite 100, Irvine, California, United States Contact Person: Johnsen Tia Email: [email protected] Tel.: 760 579 0180 Sincerely, ________________ Johnsen Tia Senior Director, Regulatory & Compliance

RAZER INC. | 9 PASTEUR, SUITE 100, IRVINE, CA 92618 USA T: +1 (949) 655 8888 | F: +1 (949) 537 7500 | RAZER.COM Certification Application Attestation Statements Razer Inc. 9 Pasteur, Suite 100 92618 Irvine, California, United States To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) Razer Inc. certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) [Razer Inc.] (“the applicant”) certifies that, as of the date of the filing of this application, the applicant - is / - is not (3) identified on the Covered List(as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Date: 2024/07/29 City: Irvine Name (2) : Johnsen Tia Function: Director, Regulatory & Compliance Telephone number: 760 579 0180 Email address: [email protected] Signature: 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double cllick on the appropriate box and select ‘’checked” then “OK”

RAZER INC. | 9 PASTEUR, SUITE 100, IRVINE, CA 92618 USA T: +1 (949) 655 8888 | F: +1 (949) 537 7500 | RAZER.COM Declaration of Authorization We Name: Razer Inc. Address: 9 Pasteur, Suite 100 City: Irvine State: California Country: United States Declare that: Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s): Product description: Wireless Dongle Type designation: RC30-0517，RC30-0517XXXX-XXXX (X can be 0-9 or A-Z) Trademark: RAZER FCC ID : RWO-517 on our behalf. Date: 2024-07-29 City: Irvine Name: Johnsen Tia Function: Director, Regulatory & Compliance Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Company Name: Razer Inc. Address:9 Pasteur, Suite 100, City: Irvine, CA92618 Country: United States To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: RWO-517 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: This document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor unfair advantage in the market. Planned Release Date STC: 180 days from date of grant (notes 2, 3, 4, 5) Date: 2024-07-29 Name and signature of applicant: Johnsen Tia Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period

RAZER INC. | 9 PASTEUR, SUITE 100, IRVINE, CA 92618 USA T: +1 (949) 655 8888 | F: +1 (949) 537 7500 | RAZER.COM Model Declaration Letter We, the undersigning company Company Name: Razer Inc. Address: 9 Pasteur, Suite 100, Irvine, CA92618, USA. Hereby confirm that the following products: Product description: Wireless Dongle Type designation: RC30-0517, RC30-0517XXXX-XXXX (X can be 0-9 or A-Z) Trademark: RAZER That All versions of the RC30-0517, RC30-0517XXXX-XXXX are electrically equal except the following difference: R C 3 0 - 0 5 1 7 X X X X - X X X X Product Category Product Main Model Number Internal family series code Internal Countries code X Can be 0-9 or A-Z Date: 2024-07-31 Name: Johnsen Tia Telephone: 760 579 0180 E-mail: [email protected] Signature:

21-MAR-2024 Model: RC30-0517 Product Marking Location:

Report No.: BTL-FCC SAR-1-2403C175 Page 1 of 27 FCC SAR Test Report FCC ID: RWO-517 Project No. : 2403C175 Equipment : Wireless Dongle Brand Name : RAZER, Test Model : RC30-0517 Series Model : RC30-0517XXXX-XXXX (X can be 0-9 or A-Z) Date of Receipt : Mar. 26, 2024 Date of Test : Apr. 12, 2024 ~ May 06, 2024 Issued Date : May 17, 2024 Report Version : R00 Test Sample : Engineering Sample No.: DG20240326109 Standard(s) : Please refer to page 2. Applicant : Razer Inc. Address : 9 Pasteur, Suite 100, Irvine, CA92618, USA Manufacturer : RAZER (ASIA-PACIFIC) PTE. LTD. Address : Razer SEA HQ, 1 One-north Crescent, #02-01, Singapore 138538 Factory : RAZER TECHNOLOGY AND DEVELOPMENT (SHENZHEN) CO., LTD Address : East Wing, 3rd Floor, Block 2, Phase 1 of Vision Shenzhen Business Park Keji South Road, Hi-Tech Industrial Park, Shenzhen 518057, China The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Justin Huang Approved by : Herbort Liu Room 108, Building 2, No.1, Yile Road, Songshan Lake Zone, Dongguan City, Guangdong, People’s Republic of China Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCC SAR-1-2403C175 Page 2 of 27 Standard(s) : IEEE Std C95.1:2019 IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 kHz to 300 GHz EN IEC/IEEE 62209-1528:2021 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1528: Human models, instrumentation, and procedures (Frequency range of 4 MHz to 10 GHz) KDB447498 D04 Interim General RF Exposure Guidance v01 KDB447498 D02 SAR Procedures for Dongle Xmtr v02 KDB865664 D01 SAR measurement 100 MHz to 6 GHz v01r04 KDB865664 D02 SAR Reporting v01r02 Report No.: BTL-FCC SAR-1-2403C175 Page 3 of 27 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCC SAR-1-2403C175 Page 4 of 27 Table of Contents Page REPORT ISSUED HISTORY 6 1 . GENERAL INFORMATION 7 1.1 STATEMENT OF COMPLIANCE 7 1.2 LABORATORY ENVIRONMENT 7 1.3 GENERAL DESCRIPTION OF EUT 7 1.4 MAIN TEST INSTRUMENTS 8 2 . RF EMISSIONS MEASUREMENT 9 2.1 TEST FACILITY 9 2.2 MEASUREMENT UNCERTAINTY 9 3 . SAR MEASUREMENTS SYSTEM CONFIGURATION 10 3.1 SAR MEASUREMENT SET-UP 10 3.1.1 TEST SETUP LAYOUT 10 3.2 DASY5 E-FIELD PROBE SYSTEM 11 3.2.1 PROBE SPECIFICATION 11 3.2.2 E-FIELD PROBE CALIBRATION 12 3.2.3 OTHER TEST EQUIPMENT 13 3.2.4 SCANNING PROCEDURE 14 3.2.5 SPATIAL PEAK SAR EVALUATION 15 3.2.6 DATA STORAGE AND EVALUATION 16 3.2.7 DATA EVALUATION BY SEMCAD 17 4 . SYSTEM VERIFICATION PROCEDURE 19 4.1 TISSUE VERIFICATION 19 4.2 SYSTEM CHECK 20 4.3 SYSTEM CHECK PROCEDURE 20 5 . SAR MEASUREMENT VARIABILITY AND UNCERTAINTY 21 5.1 SAR MEASUREMENT VARIABILITY 21 6 . OPERATIONAL CONDITIONS DURING TEST 22 6.1 TEST POSITION 22 6.2 TEST CONFIGURATION 22 6.2.1 WIFI TEST CONFIGURATION 22 7 . TEST RESULT 23 7.1 CONDUCTED POWER RESULTS 23 7.1.1 CONDUCTED POWER MEASUREMENTS OF 2.4G SRD 23 7.2 SAR TEST RESULTS 24 7.2.1 SAR MEASUREMENT RESULT 24 Report No.: BTL-FCC SAR-1-2403C175 Page 5 of 27 Table of Contents Page 8 MULTIPLE TRANSMITTER EVALUATION 25 APPENDIX 26 1. TEST LAYOUT 26 Appendix A. SAR Plots of System Verification Appendix B. SAR Plots of SAR Measurement Appendix C. Calibration Certificate Appendix D. Photographs of the Test Set-Up Report No.: BTL-FCC SAR-1-2403C175 Page 6 of 27 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-FCC SAR-1-2403C175 R00 Original Report. May 17, 2024 Valid Report No.: BTL-FCC SAR-1-2403C175 Page 7 of 27 1. GENERAL INFORMATION 1.1 STATEMENT OF COMPLIANCE Mode Highest Reported Body SAR-1g(W/kg) 2.4G SRD 0.554 Note: 1) The device is in compliance with Specific Absorption Rate (SAR) for general population uncontrolled exposure limits according to the FCC rule §2.1093, the ANSI C95.1:1992/IEEE C95.1:1991, the NCRP Report Number 86 for uncontrolled environment, a…

Text truncated - open the document above for the full version.

Report No.: BTL-FCC SAR-1-2403C175_Appendix A. Page 1 of 1 Test Laboratory: BTL Inc. Date: 2024/4/28 System Check_H2450_0428 DUT: Dipole 2450 MHz D2450V2;SN:919; Communication System: UID 0, CW (0); Frequency: 2450 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2450 MHz; σ = 1.848 S/m; ε r = 39.751; ρ = 1000 kg/m 3 Ambient Temperature：22.9 °C; Liquid Temperature：22.3 °C DASY Configuration: • Probe: EX3DV4 - SN3809; ConvF(7.46, 7.04, 6.83) @ 2450 MHz; Calibrated: 2023/12/18 • Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 • Electronics: DAE4 Sn420; Calibrated: 2024/3/19 • Phantom: SAM Mid v5.0; Type: QD000P40CD; Serial: S/N:1896 • DASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 16.5 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 118.4 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 25.9 W/kg SAR(1 g) = 13.2 W/kg; SAR(10 g) = 6.24 W/kg Maximum value of SAR (measured) = 21.4 W/kg

Report No.: BTL-FCC SAR-1-2403C175_Appendix B. Page 1 of 1 Test Laboratory: BTL Inc. Date: 2024/4/28 W07_2.4G SRD_CH39_Horizontal Down_0mm DUT: Dongle; Communication System: UID 0, SRD 2.4G (0); Frequency: 2480 MHz; Duty Cycle: 1:1 Medium parameters used: f = 2480 MHz; σ = 1.879 S/m; εr = 39.656; ρ = 1000 kg/m3 Ambient Temperature：22.9 °C; Liquid Temperature：22.3 °C DASY Configuration: • Probe: EX3DV4 - SN3809; ConvF(7.46, 7.04, 6.83) @ 2480 MHz; Calibrated: 2023/12/18 • Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 • Electronics: DAE4 Sn420; Calibrated: 2024/3/19 • Phantom: SAM Mid v5.0; Type: QD000P40CD; Serial: S/N:1896 • DASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Area Scan (5x8x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.186 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.60 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 0.594 W/kg SAR(1 g) = 0.202 W/kg; SAR(10 g) = 0.080 W/kg Maximum value of SAR (measured) = 0.413 W/kg

rn Co laboration with ,,~'\"1 11 / 1 ~,, ~ rhfi!~l w ~"'~~'.-Tl:!!ilii'\""J ~~~ m~~i.\ . fj~~CNAS&~t f/LTTL Add: No.52 HuaYuanBei Road, Haidian District, Beijing, 100191, Chi ~/..~~~ ~ CALIBRATION Tel: +86-10-62304633-2079 Fax: +86-10-62304633-2504 ''l,,f,ln\'~'' ~ CNAS L0570 E-mail: [email protected] http://www.chinattl.cn Client BTL Inc. Certificate No: Z21-60224 CALIBRATION CERTIFICATE Object D2450V2-SN: 919 Calibration Procedure(s) FF-Z11 .. 003-01 Calibration Procedures for dipole validation kits Calibration date: May 28,2021 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements (SI). The measurements and 1 the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted humidity<70%. laboratory facility: environment temperature (22±3)°C and Calibration Equipment used (M&TE critical fqr calibration) Primary Standards ID# Cal Date (Calibrated by, Certificate No.) Scheduled Calibration Power Meter NRP2 106277 23-Sep-20 (CTTL, No.J20X08336) Sep~21 Power sensor NRP8S 104291 3-Sep-20 (CTTL, No.J20X08336) Sep-21 Reference Probe EX3DV4 SN 3846 26-Apr-21 (CTTL-SPEAG,No.Z21-60084) Apr-22 DAE4 SN 777 . 08-Jan-21 (CTTL-SPEAG, No.Z21-60003) Jan-22 Secondary Standards ID# Cal Date (Calibrated by, Certificate No.) Scheduled Cplibration Signal Generator E4438C MY49071430 01-Feb-21 (CTTL, No.J21X00593) Jan-22 NetworkAnalyzer E5071 C MY46110673 14-Jan-21 (CTTL, No.J21X00232) Jan-22 Name Function Signature Calibrated by: Zhao Jing SAR Test Engineer .~D Reviewed by: Lin Hao SAR Test Engineer ~~- Approved by: Qi Dianyuan SAR Project Leader ~ Issued: June 2, 2021 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: Z21-60224 Page 1 of6 e a . CAU · ON lABORATORY Add: No.52 HuaYuanBei Road, Haidian b istrict, Beijing, 100191, China Tel: +86-1 0-62304633-2079 Fax: +86-10-62304633-2504 E-mail: [email protected] http://Www.chinattl.cn Glossary: l tissue simulating liquid TSL ConvF N/A sensitivity in TSL I NORMx,y,z not applicable or not measured ! l Calibration is Performed According to the Following Standards: a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209-1, "Measurement pro·cedure for assessment of specific absorption rate of human exposure to radio frequency fiel; s from hand-h~ld and body-mounted wireless communication devices-Part 1: evice used next to the ear (Frequency range of 300M Hz to 6GHz)", July 2016 c) IEC 62209-2, "Procedure to me sure the Specific Absorption Rate (SAR) For wireless communication devices used in lose proximity to the human body (frequency range of 30MHz to 6GHz)", March 2010 d) KDB865664, SAR Measuremen1 Requirements for 100 MHz to 6 GHz Additional Documentation: ··' e) DASY4/5 System Handbook 1· Methods Applied and Interpretation of Parameters: • Measurement Conditions: Furtt~er details are available from the Validation Report at the end of the certificate. All figures sta ed in t~e certificate are valid at the frequency indicated. • Antenna Parameters with TSL': The dipole is mounted with the spacer to position its feed point exactly below the center.rnarkinQ~ of the flat phantom section, with the arms oriented parallel to the body axis. • Feed Point Impedance andRe urn Loss: These parameters are measured with the dipole positioned under the liquid fille< phantom. The impedance stated is transformed from the measurement at the SMA conn~ctor t~ the feed point. The Return Loss ensures low · reflected power. No uncertaint~ requir~d. . • Electrical Delay: One-way dela V between the SMA connector and the antenna feed point. No uncertainty required. 1 • SAR measured: SAR measure~ at the stated antenna input power. • SAR normalized: SAR as me~s ured, rnormalized to an input power of 1 W at the antenna • SAR for nominal TSL param te rs: Th~ measUired TSL parameters are used to calculate the connector. 1 , nominal SAR result. 1 • I The reported uncertainty of n easurfment is stated as the standard uncertainty of Measurement multiplied by t1E coverage fattor k=2, which for a normal distribution Corresponds to a coverage prc~>bability pf approximately 95%. Certificate No: Z21-60224 P~ge 2 of6 '.'~~~ Measurement Conditions DASY sy_stem configuration, as far as lilO g1ven on page . 1 DASY Version , DASY52l ~ V52.10.4 Extrapolation Advanced Extra~olation Phantom Triple Flat Phantom 5.1 C Distance Dipole Center -TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz = 5 mm Frequency : .. ':#: 2450 MHz ± 1 MHz Head TSL parameters ~f:-ti : The following parameters and calculations were ClPPiied. Tempe ature Permittivity Conductivity Nominal Head TSL parameters 'j j Measured Head TSL parameters 1 Head TSL temperature change during test , SAR result with Head TSL 1 22.0 c 39.2 i (22.0 ± 0 2) oc 38.8 ±6% <1.0 c SAR averaged over 1 cm 3 (1 g) of :H~ad TSL Condition 2~0 mW input power SAR measured 1 I , I SAR for nominal Head TSL parameters normalized to 1 W I SAR averaged over 10 cm 3 (1 0 g) of Head TSL Condition SAR measured I SAR for nominal Head TSL parameters I Certificate No: Z21-60224 i 1 tl I• I 250 mW input power normalized to 1 W Page 3 of6 1.80 mho/m 1.81 mho/m ± 6% 13.1 W/kg 52.1 W/kg ± 18.8% (lc=2) 5.95 W/kg 23.7 W/kg ± 18.7% (lc=2) In Co laboration with -TTL e a CAUBRA110N LABORATORY' Add: No.52 HuaYuanBei Road, Haidian District, B~ijing, 100191, China Tel: +86-1 0-62304633-2079 Fax: +86-1 0-62304633-2504 E-mail: [email protected] http://www.chinattl.cn Appendix (Additional assessments outside the scope of CNAS L0570) Antenna Parameters with Head TSL I Impedance, transformed to feed point Return Loss . i General Antenna Parameters and Design l I Electrical Delay (one direction…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-2403C175 Page 1 of 62 FCC Radio Test Report FCC ID: RWO-517 This report concerns: Original Grant Project No. : 2403C175 Equipment : Wireless Dongle Brand Name : RAZER, Test Model : RC30-0517 Series Model : RC30-0517XXXX-XXXX (X can be 0-9 or A-Z) Applicant : Razer Inc. Address : 9 Pasteur, Suite 100, Irvine, CA92618, USA Manufacturer : RAZER (ASIA-PACIFIC) PTE. LTD. Address : Razer SEA HQ, 1 One-north Crescent, #02-01, Singapore 138538 Factory : RAZER TECHNOLOGY AND DEVELOPMENT (SHENZHEN) CO., LTD Address : East Wing, 3rd Floor, Block 2, Phase 1 of Vision Shenzhen Business Park Keji South Road, Hi-Tech Industrial Park, Shenzhen 518057, China Date of Receipt : Mar. 26, 2024 Date of Test : Mar. 27, 2024 ~ Apr. 29, 2024 Issued Date : May 20, 2024 Report Version : R00 Test Sample : Sample No.: DG20240326104 for conducted, DG20240326107 for Others. Standard(s) : FCC CFR Title 47, Part 15, Subpart C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Evan Yang Approved by : Chay Cai Room 108, Building 2, No.1, Yile Road, Songshan Lake Zone, Dongguan City, Guangdong, People’s Republic of China. Tel: +86-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-1-2403C175 Page 2 of 62 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-2403C175 Page 3 of 62 Table of Contents Page REPORT ISSUED HISTORY 6 1 . APPLICABLE STANDARDS 7 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 2.3 TEST ENVIRONMENT CONDITIONS 9 3 . GENERAL INFORMATION 10 3.1 GENERAL DESCRIPTION OF EUT 10 3.2 DESCRIPTION OF TEST MODES 12 3.3 PARAMETERS OF TEST SOFTWARE 13 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 14 3.5 SUPPORT UNITS 14 3.6 CUSTOMER INFORMATION DESCRIPTION 14 4 . AC POWER LINE CONDUCTED EMISSIONS 15 4.1 LIMIT 15 4.2 TEST PROCEDURE 15 4.3 DEVIATION FROM TEST STANDARD 15 4.4 TEST SETUP 16 4.5 EUT OPERATING CONDITIONS 16 4.6 TEST RESULTS 16 5 . RADIATED EMISSIONS 17 5.1 LIMIT 17 5.2 TEST PROCEDURE 18 5.3 DEVIATION FROM TEST STANDARD 19 5.4 TEST SETUP 19 5.5 EUT OPERATING CONDITIONS 21 5.6 TEST RESULT - 9 KHZ TO 30 MHZ 21 5.7 TEST RESULT - 30 MHZ TO 1000 MHZ 21 5.8 TEST RESULT - ABOVE 1000 MHZ 21 6 . BANDWIDTH 22 6.1 LIMIT 22 6.2 TEST PROCEDURE 22 Report No.: BTL-FCCP-1-2403C175 Page 4 of 62 Table of Contents Page 6.3 DEVIATION FROM STANDARD 22 6.4 TEST SETUP 22 6.5 EUT OPERATION CONDITIONS 22 6.6 TEST RESULTS 22 7 . MAXIMUM OUTPUT POWER 23 7.1 LIMIT 23 7.2 TEST PROCEDURE 23 7.3 DEVIATION FROM STANDARD 23 7.4 TEST SETUP 23 7.5 EUT OPERATION CONDITIONS 23 7.6 TEST RESULTS 23 8 . CONDUCTED SPURIOUS EMISSION 24 8.1 LIMIT 24 8.2 TEST PROCEDURE 24 8.3 DEVIATION FROM STANDARD 24 8.4 TEST SETUP 24 8.5 EUT OPERATION CONDITIONS 24 8.6 TEST RESULTS 24 9 . POWER SPECTRAL DENSITY 25 9.1 LIMIT 25 9.2 TEST PROCEDURE 25 9.3 DEVIATION FROM STANDARD 25 9.4 TEST SETUP 25 9.5 EUT OPERATION CONDITIONS 25 9.6 TEST RESULTS 25 10 . MEASUREMENT INSTRUMENTS LIST 26 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 28 APPENDIX B - R ADI ATED EMISSION - 9 KHZ TO 30 MHZ 31 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 36 APPENDIX D - R ADI ATED EMISSION - ABOVE 1000 MHZ 39 APPENDIX E - BANDWIDTH 52 APPENDIX F - MAXIMUM OUTPUT POWER 55 Report No.: BTL-FCCP-1-2403C175 Page 5 of 62 Table of Contents Page APPENDIX G - CONDUCTED SPURIOUS EMISSION 58 APPENDIX H - POWER SPECTRAL DENSITY 61 Report No.: BTL-FCCP-1-2403C175 Page 6 of 62 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-FCCP-1-2403C175 R00 Original Report. May 20, 2024 Val id Report No.: BTL-FCCP-1-2403C175 Page 7 of 62 1. APPLICABLE STANDARDS According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: ANSI C63.10-2013 The following reference test guidance is not within the scope of accreditation of A2LA: KDB 558074 D01 15.247 Meas Guidance v05r02 2. SUMMARY OF TEST RESULTS Test procedures according to the technica…

Text truncated - open the document above for the full version.

1 Antenna Part Specification Antenna material： BT Antenna Antenna type： FPC Antenna Version： V1.0 Date： 2024.03.21 Manufacturer： Razer Inc. Address： 9 Pasteur, Suite 100, Irvine, CA92618, USA Model No： RC30-0517 2 I：The report of passive data Angilent E5071C VSWR(S11) parameter： 3 Efficiency： BT Frequency （MHz） Gain (dBi) Efficiency (dB ) Efficiency 2400 1.2 -4.2 38.0% 2410 1.2 -4.2 38.1% 2420 1.1 -4.2 38.0% 2430 0.9 -4.4 36.5% 2440 0.7 -4.5 35.1% 2450 0.7 -4.5 35.9% 2460 0.7 -4.7 34.1% 2470 1.1 -4.3 36.9% 2480 1.2 -4.0 39.4% Average value 1.0 -4.3 36.9% 3D Antenna radiation pattern: 4 Antenna radiation pattern: Theta=90.00deg Phi=90.00deg Phi=0.00deg 5 II：3D Active test report of antenna Channel TRP（dBm） TIS（dBm） DONGLE CH 0 5.7 -85.2 CH 39 5.7 -85.8 CH 78 5.5 -85.2 OTA Standard Chamber 6 III：Structure file