RWO-RZ060519Gaming Controller

Razer Inc. CERTIFICATIONS CONCERNING “COVERED” EQUIPMENT Date: 2026-06-22 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 FCC ID: RWO-RZ060519 To Whom It May Concern: As required by section 2.911(d)(5)(i), [Razer Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. As required by section 2.911(d)(5)(i), [Razer Inc.] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). As required by section 2.911(d)(5)(ii), [Razer Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Thank you for your attention to this matter. Sincerely yours, Signature Printed Name: Johnsen Tia Company: Razer Inc. Job Title: Associate VP, Regulatory & Compliance Email: [email protected] Telephone: 760 579 0180

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 16-Apr--2025 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: RWO Razer Inc. (“the applicant”) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0022386734 Name: Address: Contact Person: Email: Tel.: Razer Inc. 9 Pasteur, Irvine, California, United States Johnsen Tia [email protected] 760 579 0180 Sincerely, ________________ Johnsen Tia Associate VP, Regulatory & Compliance

Razer Inc. Declaration of Authorization We Name: Razer Inc. Address: 9 Pasteur City: Irvine State: California Country: United States Declare that: Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s): Product description: Gaming Controller Type designation: RZ06-0519, RZ06-0519XXXX-XXXX(X can be 0-9 or A-Z) Trademark: RAZER FCC ID : RWO-RZ060519 on our behalf. Date: 2026-06-22 City: Irvine Name: Johnsen Tia Function: Associate VP, Regulatory & Compliance Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 02-01-2022 RF_501, Issue 10 Company Name: Razer Inc. Address: 9 Pasteur, City: Irvine, CA92618 Country: United States To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: RWO-RZ060519 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: This document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor unfair advantage in the market. Planned Release Date STC: 180 days from date of grant (notes 2, 3, 4, 5) Date: 2026-06-22 Name and signature of applicant: Johnsen Tia Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period

Supplier’s Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Manufacturer: U.S. Responsible Party: RAZER (ASIA-PACIFIC) PTE. LTD. Razer SEA HQ, 1 One-north Crescent, #02-01, Singapore 138538 Razer Inc., 9 Pasteur, Irvine, California 92618 United States Contact Person: Tel.: 760 579 0180 Fax: 760 579 0182 Email: [email protected] Internet: https://www.razer.com Model: RZ06-0519, RZ06-0519XXXX-XXXX(X can be 0-9 or A-Z) Classification: FCC Part 15B We hereby declare that the equipment bearing the trade name and model number specified above was tested conforming to the applicable FCC rule part(s) 15B and the most accurate measurement standards. We confirm that the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commission’s requirements. Date: 2026-06-22 ----------------------------------- Johnsen Tia / Associate VP, Regulatory & Compliance [email protected] RAZER INC. 9 Pasteur, Irvine, California 92618 United States

Razer Inc. Model Declaration Letter We, the undersigning company Company Name: Razer Inc. 9 Pasteur, Irvine, CA 92618, USA Hereby confirm that the following products: Product description: Gaming Controller Type designation: RZ06-0519, RZ06-0519XXXX-XXXX(X can be 0-9 or A-Z) Trademark: RAZER That All versions of the Model RZ06-0519 and RZ06-0519XXXX-XXXX(X can be 0-9 or A-Z) are electrically equal except the following difference: 1. It is the same as the basic model and X is used to define which country it is forunder the same family series. Date: 2026-06-22 Name: Johnsen Tia Telephone: 760 579 0182 E-mail: [email protected] Signature:

Report No.: BTL-FCCP-2-2602C259 Report Version: R00 Page 1 of 5 FCC RF EXPOSURE REPORT FCC ID: RWO-RZ060519 Project No. : 2602C259 Equipment : Gaming Controller Brand Name : RAZER, Test Model : RZ06-0519 Model Name : RZ06-0519, RZ06-0519XXXX-XXXX(X can be 0-9 or A-Z) Hardware Version : DVT Software Version : V1.00.02.00 Applicant : Razer Inc. Address : 9 Pasteur, Irvine, CA 92618, USA. Manufacturer : RAZER (ASIA-PACIFIC) PTE. LTD. Address : Razer SEA HQ, 1 One-north Crescent, #02-01, Singapore 138538 Factory : RAZER TECHNOLOGY AND DEVELOPMENT (SHENZHEN) CO., LTD Address : East Wing, 3rd Floor, Block 2, Phase 1 of Vision Shenzhen Business Park Keji South Road, Hi-Tech Industrial Park, Shenzhen 518057, China Date of Receipt : Apr. 10, 2026 Date of Test : Apr. 13, 2026 ~ Jun. 04, 2026 Issued Date : Jun. 16, 2026 Test Sample : Sample No.: DG920260410240 Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & KDB447498 D01 v06 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Dongguan) Prepared by : Jaden Kong E-signature location Approved by : Chay Cai No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-2-2602C259 Report Version: R00 Page 2 of 5 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacturer's responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-2-2602C259 Report Version: R00 Page 3 of 5 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-2-2602C259 R00 Original Report. Jun. 16, 2026 Valid Report No.: BTL-FCCP-2-2602C259 Report Version: R00 Page 4 of 5 1. GENERAL CONCULUSION According to FCC KDB447498 D01, Appendix A, SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison Appendix A - SAR Test Exclusion Thresholds for 100 MHz - 6 GHz and < 50 mm MHz 5 10 15 20 25 30 35 40 45 50 mm 150 39 77 116 155 194 232 271 310 349 387 SAR Test Exclusion Thresholds (mW) 300 27 55 82 110 137 164 192 219 246 274 450 22 45 67 89 112 134 157 179 201 224 835 16 33 49 66 82 98 115 131 148 164 900 16 32 47 63 79 95 111 126 142 158 1500 12 24 37 49 61 73 86 98 110 122 1900 11 22 33 44 54 65 76 87 98 109 2450 10 19 29 38 48 57 67 77 86 96 3600 8 16 24 32 40 47 55 63 71 79 5200 7 13 20 26 33 39 46 53 59 66 5400 6 13 19 26 32 39 45 52 58 65 5800 6 12 19 25 31 37 44 50 56 62 Report No.: BTL-FCCP-2-2602C259 Report Version: R00 Page 5 of 5 2. TABLE FOR FILED ANTENNA For Left Side: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A Polarization Pillar Antenna N/A 1.9 For Right Side: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A Polarization Pillar Antenna N/A -1.2 Note: The antenna gain is provided by the manufacturer. 3. TEST RESULTS Function Frequency (MHz) Max. Output Power (dBm) Max. Tune-up (dB) Max. Tune-up Power (dBm) Max. Tune-up Power (mW) Exclusion Thresholds Limit Result SRD 2402 6.33 0 6.33 4.2954 1.3314 7.5 Pass Note: 1) No SAR evaluation required since transmitter power is below FCC threshold. 2) This product is only for limbs. End of Test Report

Report No.: BTL-FCCP-1-2602C259 Report Version: R00 Page 1 of 78 FCC Radio Test Report FCC ID: RWO-RZ060519 This report concerns: Original Grant Project No. : 2602C259 Equipment : Gaming Controller Brand Name : RAZER, Model Name : RZ06-0519, RZ06-0519XXXX-XXXX(X can be 0-9 or A-Z) Applicant : Razer Inc. Address : 9 Pasteur, Irvine, CA 92618, USA. Manufacturer : RAZER (ASIA-PACIFIC) PTE. LTD. Address : Razer SEA HQ, 1 One-north Crescent, #02-01, Singapore 138538 Factory : RAZER TECHNOLOGY AND DEVELOPMENT (SHENZHEN) CO., LTD Address : East Wing, 3rd Floor, Block 2, Phase 1 of Vision Shenzhen Business Park Keji South Road, Hi-Tech Industrial Park, Shenzhen 518057, China Date of Receipt : Apr. 10, 2026 Date of Test : Apr. 13, 2026 ~ Jun. 04, 2026 Issued Date : Jun. 16, 2026 Test Sample : Sample No.: DG920260410240 for conducted, DG920260410239 for others. Standard(s) : FCC CFR Title 47, Part 15, Subpart C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Dongguan) Prepared by : Jaden Kong E-signature location Approved by : Chay Cai No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-1-2602C259 Report Version: R00 Page 2 of 78 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacturer's responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-2602C259 Report Version: R00 Page 3 of 78 Table of Contents Page REVISION HISTORY 6 1 . APPLICABLE STANDARDS 7 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 2.3 TEST ENVIRONMENT CONDITIONS 9 3 . GENERAL INFORMATION 10 3.1 GENERAL DESCRIPTION OF EUT 10 3.2 DESCRIPTION OF TEST MODES 12 3.3 PARAMETERS OF TEST SOFTWARE 13 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 14 3.5 SUPPORT UNITS 15 3.6 CUSTOMER INFORMATION DESCRIPTION 15 4 . AC POWER LINE CONDUCTED EMISSIONS 16 4.1 LIMIT 16 4.2 TEST PROCEDURE 16 4.3 DEVIATION FROM TEST STANDARD 16 4.4 TEST SETUP 17 4.5 EUT OPERATING CONDITIONS 17 4.6 TEST RESULTS 17 5 . RADIATED EMISSIONS 18 5.1 LIMIT 18 5.2 TEST PROCEDURE 19 5.3 DEVIATION FROM TEST STANDARD 20 5.4 TEST SETUP 20 5.5 EUT OPERATING CONDITIONS 22 5.6 TEST RESULT - 9 KHZ TO 30 MHZ 22 5.7 TEST RESULT - 30 MHZ TO 1000 MHZ 22 5.8 TEST RESULT - ABOVE 1000 MHZ 22 6 . BANDWIDTH 23 6.1 LIMIT 23 Report No.: BTL-FCCP-1-2602C259 Report Version: R00 Page 4 of 78 Table of Contents Page 6.2 TEST PROCEDURE 23 6.3 DEVIATION FROM STANDARD 23 6.4 TEST SETUP 23 6.5 EUT OPERATION CONDITIONS 23 6.6 TEST RESULTS 23 7 . MAXIMUM OUTPUT POWER 24 7.1 LIMIT 24 7.2 TEST PROCEDURE 24 7.3 DEVIATION FROM STANDARD 24 7.4 TEST SETUP 24 7.5 EUT OPERATION CONDITIONS 24 7.6 TEST RESULTS 24 8 . CONDUCTED SPURIOUS EMISSION 25 8.1 LIMIT 25 8.2 TEST PROCEDURE 25 8.3 DEVIATION FROM STANDARD 26 8.4 TEST SETUP 26 8.5 EUT OPERATION CONDITIONS 26 8.6 TEST RESULTS 26 9 . POWER SPECTRAL DENSITY 27 9.1 LIMIT 27 9.2 TEST PROCEDURE 27 9.3 DEVIATION FROM STANDARD 27 9.4 TEST SETUP 27 9.5 EUT OPERATION CONDITIONS 27 9.6 TEST RESULTS 27 10 . MEASUREMENT INSTRUMENTS LIST 28 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 31 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 36 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 45 APPENDIX D - RADIATED EMISSION - ABOVE 1000 MHZ 50 APPENDIX E - BANDWIDTH 69 Report No.: BTL-FCCP-1-2602C259 Report Version: R00 Page 5 of 78 Table of Contents Page APPENDIX F - MAXIMUM OUTPUT POWER 72 APPENDIX G - CONDUCTED SPURIOUS EMISSION 74 APPENDIX H - POWER SPECTRAL DENSITY 77 Report No.: BTL-FCCP-1-2602C259 Report Version: R00 Page 6 of 78 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-1-2602C259 R00 Original Report. Jun. 16, 2026 Valid Report No.: BTL-FCCP-1-2602C259 Report Version: R00 Page 7 of 78 1. APPLICABLE STANDARDS According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standard: ANSI C63.10-2020 The following reference test guidance is not within the scope of accreditation of A2LA: KDB 558074 D0…

Text truncated - open the document above for the full version.

東莞東聚 Customer: ScoutT2 Project: CW337Antenna: D( 左側 PCB/ 結構修改 / 新機構 )Version: 2026/05/06Release date: 1 Test Report-ScoutT2 Ken YenPrepared by: Tom LiuChecked by: Mike YangApproved by: 2 Report Outline 1.Background 2.Measurement Setup 2.1 Equipment List 3. Experimental Results 3.1 S Parameters 3.2Radiation efficiency 3.3 Matching Circuit 3.4Conclusion 3 Background Purpose of Version D verification D Version Test Scope • Validate the antenna performance after left-side PCB / mechanical structure modification and new housing configuration. • Confirm both left and right antenna performance with phone and right- hand phantom condition. • Review return loss, radiation efficiency, peak gain, radiation pattern, and final matching network. Evaluation Criteria • Operating band: 2400–2485 MHz. • Return loss target: ≤ −10 dB across the working band. • Use the measured efficiency and peak gain as the reference data for next-stage sample review. This report focuses on confirming whether the updated mechanical/PCB configuration can keep stable 2.4 GHz antenna performance under realistic handheld usage. 4 Measurement Setup 5 Equipment information Equipment List CALIBRATION DUE DATE SERIAL NUMBERMODEL NUMBER TYPE OF EQUIPMENT once a weekN/A 十大科技 ETS-844 (600MHz-10GHz) OTA2-3D far field Chamber N/AN/AMaxwell V3.7.1 Measurement Software N/ASN6262021092MT8862Aswitch control 2026.07.03MY46213611 KEYSIGHT E5071C (9kHz-8.5GHz) Network Analyzer (for Test items ) 2026.06.30MY51401470 KEYSIGHT E5072A (9kHz-14GHz) Network Analyzer (for chamber) Experimental results 7 Measurement Setup Placement of antenna Ant Ant Right Left Ant Ant Cellphone(iPhone 15Pro) Phantom hand( SPEAG SHO-V3RTHG) 8 Experimental results Left side & Right side 9 Return loss Right sideLeft side Return Loss Both left and right side antennas meet the ≤ −10 dB requirement across the 2400–2485 MHz operating band. 10 Radiation performance 248524802475247024652460245524502445244024352430242524202415241024052400 Frequency (MHz) 15.0 15.5 15.9 16.2 16.1 16.1 16.4 16.6 16.5 16.2 16.0 16.0 16.0 16.2 16.2 15.6 14.8 14.2 Efficiency (%) Right side -2.3 -2.1 -1.8 -1.7 -1.7 -1.5 -1.4 -1.4 -1.3 -1.3 -1.4 -1.3 -1.3 -1.3 -1.2 -1.4 -1.6 -1.8 Peak Gain (dBi) 18.4 18.8 19.4 19.9 20.1 20.7 21.5 21.5 20.6 19.8 19.8 20.4 20.5 19.7 18.6 18.1 18.4 18.7 Efficiency (%) Left side 0.8 0.9 1.1 1.3 1.4 1.7 1.9 1.9 1.7 1.6 1.6 1.8 1.8 1.5 1.3 1.2 1.2 1.3 Peak Gain (dBi) -6 -4 -2 0 2 4 0 10 20 30 40 50 Peak Gain(dBi) Efficiency(%) Frequency(MHz) Efficiency(%)Peak Gain(dBi) Right side Left side -4 -2 0 2 4 6 0 10 20 30 40 50 Peak Gain(dBi) Efficiency(%) Frequency(MHz) Efficiency(%)Peak Gain(dBi) Efficiency Average efficiency: Left side 19.7%; Right side 15.9%. 11 Radiation Pattern @ 2445MHz (unit: dBi) Right side Left side Peak Gain Left side: 0.8 to 1.9 dBi; Right side: −2.3 to −1.2 dBi. 12 Matching network System Matching Circuit Component P/NVendorDescriptionLocation LQP03TG1N5B02DMURATA1.5nH, (0201)1 LQP03TG1N5B02DMURATA1.5nH, (0201)2 GRM0335C1H1R0WA01DMURATA1.0pF, (0201)3 Right side System Matching Circuit Component P/NVendorDescriptionLocation GRM1555C1H1R0WA01DMURATA1.0pF, (0402)1 LQG15HS1N8S02DMURATA1.8nH, (0402)2 GRM1555C1HR06WA01DMURATA0.6pF, (0402)3 Left side 13 Conclusion Summary of Version D measurement results Return Loss Both left and right side antennas meet the ≤ −10 dB requirement across the 2400–2485 MHz operating band. Efficiency Average efficiency: Left side 19.7%; Right side 15.9%. Peak Gain Left side: 0.8 to 1.9 dBi; Right side: −2.3 to −1.2 dBi. Recommend ation Use the current matching networks and layout as the D-version reference, and proceed with next-stage sample / system verification under the same phone + hand condition. Conclusion: The left-side sample shows higher radiation performance. However, since it was measured using the right-hand phantom in a reversed gripping posture, the result may be affected by the gripping position and hand-shielding area. Further real-use reception testing with actual human gripping is recommended.