RWO-RC210240Wireless Charger

Razer Inc. Doc nr. CERTIFICATIONS CONCERNING “COVERED” EQUIPMENT Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 2026.01.04 FCC ID: RWO-RC210240 To Whom It May Concern: As required by section 2.911(d)(5)(i), [Razer Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Razer Inc. certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). As required by section 2.911(d)(5)(ii), [Razer Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Thank you for your attention to this matter. Sincerely yours, Printed Name: Johnsen Tia Company: Razer Inc. Job Title: Associate VP, Regulatory & Compliance Email: [email protected] Telephone: 760 579 0180

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 16-Apr--2025 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: RWO Razer Inc. (“the applicant”) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0022386734 Name: Address: Contact Person: Email: Tel.: Razer Inc. 9 Pasteur, Irvine, California, United States Johnsen Tia [email protected] 760 579 0180 Sincerely, ________________ Johnsen Tia Associate VP, Regulatory & Compliance

Razer Inc. Declaration of Authorization We Name: Razer Inc. Address: 9 Pasteur City: Irvine State: California Country: United States Declare that: Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s): Product description: Wireless Charger Type designation: RC21-0240，RC21-0240XXXX-XXXX (X can be 0-9 or A-Z) Trademark: RAZER FCC ID : RWO-RC210240 on our behalf. Date: 2026-01-04 City: Irvine Name: Johnsen Tia Function: Associate VP, Regulatory & Compliance Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 02-01-2022 RF_501, Issue 10 Company Name: Razer Inc. Address: 9 Pasteur, City: Irvine, California Country: United States To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: RWO-RC210240 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: This document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor unfair advantage in the market. Planned Release Date STC: 180 days from date of grant (notes 2, 3, 4, 5) Date: 2026-01-04 Name and signature of applicant: Johnsen Tia Notes: 1) A document or type of document can only have ONE type of confidentiality! FCC, Request for non-disclosure Date: 02-01-2023 RF_501, Issue 10 Page 1 of 1 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period

Model Declaration Letter We, the undersigning company Company Name: Razer Inc. Address: 9 Pasteur, Irvine, CA92618, USA Hereby confirm that the following products: Product description: Wireless Charger Type designation: RC21-0240, RC21-0240XXXX-XXXX (X can be 0-9 or A-Z) Trademark: RAZER That All versions of the Model RC21-0240 and RC21-0240XXXX-XXXX (X can be 0-9 or A-Z) are electrically equal except the following difference: It is the same as the basic model and X is used to define which country it is for under the same family series. Date: 2026-01-04 Name: Johnsen Tia Telephone: 65 6571 6828 E-mail: [email protected] Signature:

Supplier’s Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Manufacturer: U.S. Responsible Party: RAZER (ASIA-PACIFIC) PTE. LTD. Razer SEA HQ, 1 One-north Crescent, #02-01, Singapore 138538 Razer Inc., 9 Pasteur, Irvine, California, 92618, United States Contact Person: Tel.: 760 579 0180 Fax: 760 579 0182 Email: [email protected] Internet: https://www.razer.com Model: RC21-0240, RC21-0240XXXX-XXXX (X can be 0-9 or A-Z) (X can be 0-9 or A-Z) Classification: FCC Part 15B We hereby declare that the equipment bearing the trade name and model number specified above was tested conforming to the applicable FCC rule part(s) 15B and the most accurate measurement standards. We confirm that the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commission’s requirements. Date: 2026-01-04 ----------------------------------- Johnsen Tia / Associate VP, Regulatory & Compliance [email protected] Razer Inc. 9 Pasteur, Irvine, California, 92618, United States

2-OCT-2025 Model: RC21-0240 Product Marking Dimension: 60 x 45 mm Front:

Report No.: BTL-FCCP-2-2507C348 Report Version: R01 Page 1 of 9 Human Exposure Report FCC ID: RWO-RC210240 Project No. : 2507C348 Equipment : Wireless Charger Brand Name : RAZER, Test Model : RC21-0240 Model Name : RC21-0240, RC21-0240XXXX-XXXX (X can be 0-9 or A-Z) Hardware Version : V8 Software Version : YGVJG Applicant : Razer Inc. Address : 9 Pasteur, Irvine, CA 92618, USA Manufacturer : RAZER (ASIA-PACIFIC) PTE. LTD. Address : Razer SEA HQ, 1 One-north Crescent, #02-01, Singapore 138538 Factory : RAZER TECHNOLOGY AND DEVELOPMENT (SHENZHEN) CO., LTD Address : East Wing, 3rd Floor, Block 2, Phase 1 of Vision Shenzhen Business Park Keji South Road, Hi-Tech Industrial Park, Shenzhen 518057, China Date of Receipt : Jul. 25, 2025 Date of Test : Jul. 25, 2025 ~ Oct. 20, 2025 Issued Date : Jan. 21, 2026 Test Sample : Sample No.: DG2025072566 Standard(s) : 47 CFR PART 1, Subpart I, Section 1.1310 KDB 680106 D01 Wireless Power Transfer v04 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Dongguan) Prepared by : Chella Zheng Approved by : Chay Cai No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-2-2507C348 Report Version: R01 Page 2 of 9 Table of Contents Page REVISION HISTORY 3 1 . GENERAL INFORMATION 4 1.1 TEST FACILITY 4 1.2 MEASUREMENT UNCERTAINTY 4 2 . APPLICABLE STANDARD 5 2.1 LIMITS 5 3 . MEASUREMENT INSTRUMENTS LIST 5 4 . TEST PROCEDURE 6 5 . TEST RESULTS 7 Report No.: BTL-FCCP-2-2507C348 Report Version: R01 Page 3 of 9 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-2-2507C348 R00 Original Report. Dec. 09, 2025 Invalid BTL-FCCP-2-2507C348 R01 This report removed the test photos. lt is a revision of the report BTL-FCCP-2-2507C348 R00. This is a newly released report, replacing the BTL-FCCP-2-2507C348 R00 report. Jan. 21, 2026 Valid Report No.: BTL-FCCP-2-2507C348 Report Version: R01 Page 4 of 9 1. GENERAL INFORMATION 1.1 TEST FACILITY The test facilities used to collect the test data in this report is at the location of No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. BTL's Registration Number for FCC: 747969 BTL's Designation Number for FCC: CN1377 1.2 MEASUREMENT UNCERTAINTY ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2)) The BTL measurement uncertainty as below table: Test Items U Magnetic Field strength (ESM-100, 5 Hz - 400 kHz) 6.220% Electrical Field strength (EF 0391(NBM), 100 kHz - 3 GHz) 13.288% Report No.: BTL-FCCP-2-2507C348 Report Version: R01 Page 5 of 9 2. APPLICABLE STANDARD 2.1 LIMITS For 47 CFR PART 1, Subpart I, Section 1.1310: Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (m/W/cm 2 ) Averaging time (minutes) (A) Limits for Occupational / Controlled Exposures 0.3-3.0 614 1.63 *(100) 6 3.0-30 1842/f 4.89/f *(900/f 2 ) 6 30-300 61.4 0.163 1.0 6 300-1500 / / f/300 6 1500-100000 / / 5 6 (B) Limits for General Population / Uncontrolled Exposures 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100000 / / 1.0 30 F=frequency in MHz *=Plane-wave equivalent power density RF exposure compliance will need to be determined with respect to 1.1307(c) and (d) of the FCC rules. The emissions should be within the limits at 300kHz in Table 1 of 1.1310 (use the 300kHz limits for 150kHz: 614V/m, 1.63A/m). 3. MEASUREMENT INSTRUMENTS LIST Human Exposure Item Kind of Equipment Manufacturer Type No. Serial No. Calibrated until 1 E-Field Probe Narda Safety Test Solutions GmbH EF 0391(NBM) A-0253 Jul. 17, 2026 2 NARDA Broadband Field Meter Narda Safety Test Solutions GmbH NBM-520 B-0138 Jul. 17, 2026 3 3D H/E Fieldmeter maschek Elektronik ESM-100 971965 Nov. 17, 2026 Remark: (1) All calibration period of equipment list is one year. Report No.: BTL-FCCP-2-2507C348 Report Version: R01 Page 6 of 9 4. TEST PROCEDURE (a) Test setup example diagram: For E-Field measure: For H-Field measure: (b) Test performed with all the radiating structures operating at maximum power at the same time. (c) Evaluate each edge surface of the host/client pair and identify the worst surface. (d) Measurements are taken along worst surface the device from 0cm~20cm in 2cm minimum increment. (e) Proceed to collect the 11 measurement points that will be used to build the predictive model by curve-fitting. For polynomial regression models, the order of the model shall be increased until signs of over fitting become evident. (f) Using polynomial regression techniques to predict estimated values at touch position (0 cm). (g) For validation purposes: If the value to show a 30% agreement between the mode and the probe measurements for the two closest points to the device surface, and with 2cm increments. Then this extrapolation method is reasonable. Report No.: BTL-FCCP-2-2507C348 Report Version: R01 Page 7 of 9 5. TEST RESULTS The E-field strength results of the probe sensor with a center distance of 4cm ~ 28cm from the surface of the EUT coil are as follows: Distance (cm) E-Field (V/m) 4 4.64 6 4.29 8 4.10 10 3.78 12 3.43 14 3.10 16 2.84 18 2.71 20 2.48 22 2.29 24 2.11 26 1.85 28 1.63 The H-field strength results of the probe sensor with a center distance of 3cm ~ 27cm and 6~26cm from the surface of the EUT coil are as follows: Distance (cm) H-Field (A/m) 3 0.3740 5 0.3676 7 0.3456 9 0.3209 11 0.3045 13 0.2859 15 0.2687 17 0.2469 19 0.2258 21 0.2114 23 0.1981 25 0.1768 27 0.1549 6 0.3484 8 0.3264 10 0.3017 12 0.2853 14 0.2667 16 0.2495 18 0.2277 20 0.2066 22 0.1922 24 0.1789 26 0.1576 Report No.: BTL-FCCP-2-2507C348 Report Version: R01 Page 8 of 9 Us…

Text truncated - open the document above for the full version.

广 州 阿 美 欧 电 子 科 技 有 限 公 司 Guangzhou AMEIOU Electronic Technology Co., LTD 产 品 规 格 承 认 书 SPECIFICATION FOR APPROVAL ■产品形状和尺寸 Product Apperance & Dimensions (Unit: mm) (注：图片仅供参考，产品以实物为准。) ■产品电气特性 Product Electrical characteristics 参数 (Parameter)： 数值(Value) 产品名称（Product name） 无线充电线圈模组 产品编号 (Product number)： HY435A11G70L-30S8 铁氧体型号 (Ferrite type)： Φ43.5*Φ5.3*0.8mm（双糟） 线材型号 (Coil type)： 丝包多股铜线 0.08*70P 线圈匝数 (Coil Turns)： 10TS 绕线方向（Coil direction）: 顺时针（以最外圈为准） 电感 (Inductance)： 6.3 μH±10% Q 值 (Q Value)： 45 (Min.) 直流电阻 (DC Resistance)： 80 mΩ (Max.) 测试仪器 (Testing Instrument)： TH2816B @100kHz、1Vrms；TH2512B At 25°C 备注（Note）： 背面贴双面胶 ■更多信息请咨询我们(Contact Us For More Information)。 www.ameiou.com 电话（TEL）:13503022030

广 州 阿 美 欧 电 子 科 技 有 限 公 司 Guangzhou AMEIOU Electronic Technology Co., LTD 产 品 规 格 承 认 书 SPECIFICATION FOR APPROVAL ■产品形状和尺寸 Product Apperance & Dimensions (Unit: mm) (注：图片仅供参考，产品以实物为准。) ■产品电气特性 Product Electrical characteristics 参数 (Parameter)： 数值(Value) 产品名称（Product name） 无线充电线圈模组 产品编号 (Product number)： HY435A11G70L-145S8 铁氧体型号 (Ferrite type)： Φ43.5*Φ5.3*0.8mm（双糟） 线材型号 (Coil type)： 丝包多股铜线 0.08*70P 线圈匝数 (Coil Turns)： 10TS 绕线方向（Coil direction）: 顺时针（以最外圈为准） 电感 (Inductance)： 6.3 μH±10% Q 值 (Q Value)： 45 (Min.) 直流电阻 (DC Resistance)： 80 mΩ (Max.) 测试仪器 (Testing Instrument)： TH2816B @100kHz、1Vrms；TH2512B At 25°C 备注（Note）： 背面贴双面胶 ■更多信息请咨询我们(Contact Us For More Information)。 www.ameiou.com 电话（TEL）:13503022030

Report No.: BTL-FCCP-1-2507C348 Report Version: R00 Page 1 of 31 FCC Radio Test Report FCC ID: RWO-RC210240 This report concerns: Original Grant Project No. : 2507C348 Equipment : Wireless Charger Brand Name : RAZER, Model Name : RC21-0240, RC21-0240XXXX-XXXX (X can be 0-9 or A-Z) Applicant : Razer Inc. Address : 9 Pasteur, Irvine, CA 92618, USA Manufacturer : RAZER (ASIA-PACIFIC) PTE. LTD. Address : Razer SEA HQ, 1 One-north Crescent, #02-01, Singapore 138538 Factory : RAZER TECHNOLOGY AND DEVELOPMENT (SHENZHEN) CO., LTD Address : East Wing, 3rd Floor, Block 2, Phase 1 of Vision Shenzhen Business Park Keji South Road, Hi-Tech Industrial Park, Shenzhen 518057, China Date of Receipt : Jul. 25, 2025 Date of Test : Jul. 25, 2025 ~ Oct. 20, 2025 Issued Date : Dec. 09, 2025 Test Sample : Sample No.: DG2025072566 Standard(s) : FCC CFR Title 47, Part 15, Subpart C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Dongguan) Prepared by : Chella Zheng Approved by : Chay Cai No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-1-2507C348 Report Version: R00 Page 2 of 31 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-2507C348 Report Version: R00 Page 3 of 31 Table of Contents Page REVISION HISTORY 5 1 . APPLICABLE STANDARDS 6 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 2.3 TEST ENVIRONMENT CONDITIONS 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 9 3.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 3.4 SUPPORT UNITS 10 3.5 CUSTOMER INFORMATION DESCRIPTION 10 4 . AC POWER LINE CONDUCTED EMISSIONS TEST 11 4.1 LIMIT 11 4.2 TEST PROCEDURE 11 4.3 DEVIATION FROM TEST STANDARD 11 4.4 TEST SETUP 12 4.5 EUT OPERATING CONDITIONS 12 4.6 TEST RESULTS 12 5 . RADIATED EMISSION TEST 13 5.1 LIMIT 13 5.2 TEST PROCEDURE 13 5.3 DEVIATION FROM TEST STANDARD 13 5.4 TEST SETUP 14 5.5 EUT OPERATING CONDITIONS 15 5.6 TEST RESULT - 9 KHZ TO 30 MHZ 15 5.7 TEST RESULTS - 30 MHZ TO 1000 MHZ 15 6 . BANDWIDTH 16 6.1 LIMIT 16 6.2 TEST PROCEDURE 16 6.3 DEVIATION FROM STANDARD 16 6.4 TEST SETUP 16 6.5 EUT OPERATION CONDITIONS 16 Report No.: BTL-FCCP-1-2507C348 Report Version: R00 Page 4 of 31 Table of Contents Page 6.6 TEST RESULTS 16 7 . MEASUREMENT INSTRUMENTS LIST 17 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 18 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 21 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 26 APPENDIX D - BANDWIDTH 29 Report No.: BTL-FCCP-1-2507C348 Report Version: R00 Page 5 of 31 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-1-2507C348 R00 Original Report. Dec. 09, 2025 Valid Report No.: BTL-FCCP-1-2507C348 Report Version: R00 Page 6 of 31 1. APPLICABLE STANDARDS According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standard: ANSI C63.10-2020 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC CFR Title 47, Part 15, Subpart C Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Line Conducted Emissions APPENDIX A PASS ------ 15.209(a) Radiated Emissions APPENDIX B APPENDIX C PASS ------ 15.215(c) Bandwidth APPENDIX D PASS ------ 15.203 Antenna Requirement ------ PASS Note(2) NOTE: (1) “N/A” denotes test is not applicable to this device. (2) The device what use a permanently attached antenna were considered sufficient to comply with the provisions of 15.203. Report No.: BTL-FCCP-1-2507C348 Report Version: R00 Page 7 of 31 2.1 TEST FACILITY The test facilities used to collect the test data in this report is at the location of No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. BTL's Registration Number for FCC: 747969 BTL's Designation Number for FCC: CN1377 2.2 MEASUREMENT UNCERTAINTY ISO/IEC 17025 requires that an estimate of the…

Text truncated - open the document above for the full version.