RWO-RC300520Wireless Dongle

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 20-Feb--2023 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: RWO Razer Inc. (“the applicant”) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0022386734 Name: Razer Inc. Address: 9 Pasteur, Suite 100, Irvine, California, United States Contact Person: Johnsen Tia Email: [email protected] Tel.: 760 579 0180 Sincerely, ________________ Johnsen Tia Senior Director, Regulatory & Compliance

Razer Inc. CERTIFICATIONS CONCERNING “COVERED” EQUIPMENT Date:2024-07-06 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 FCC ID: RWO-RC300520 To Whom It May Concern: As required by section 2.911(d)(5)(i), [Razer Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. As required by section 2.911(d)(5)(ii), [Razer Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Thank you for your attention to this matter. Sincerely yours, Signature Printed Name: Johnsen Tia Company: Razer Inc. Job Title: Associate VP, Regulatory & Compliance Email: [email protected] Telephone: 760 579 0180

RF_160_05 Declaration of Authorisation Date of issue 02-01-2023 (Razer Inc.) Declaration of Authorization We Name: Razer Inc. Address: 9 Pasteur, Suite 100. City: Irvine, California Country: United States Declare that: Name Representative of agent: Ms. Rose Liu (1) Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country China is authorized to apply for Certification of the following product(s): Product description: Wireless Dongle Type designation: RC30-0520, RC30-0520XXXX-XXXX(X can be 0-9 or A-Z) Trademark: RAZER Validity/ expiry date:2025-07-06 on our behalf. Date: 2024-07-06 City: Irvine Name: Johnsen Tia (2) Function: Associate VP, Regulatory and Compliance Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 02-01-2022 RF_501, Issue 10 Company Name: Razer Inc. Address: 9 Pasteur, Suite 100 City: Irvine, California Country: United States To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: RWO-RC300520 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: This document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor unfair advantage in the market. Planned Release Date STC: 180 days from date of grant (notes 2, 3, 4, 5) Date: 2024-07-06 Name and signature of applicant: Johnsen Tia Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period

Model Declaration Letter We, the undersigning company Company Name: Razer Inc. Address: 9 Pasteur, Suite 100, Irvine, California, United States, 92618 Hereby confirm that the following products: Product description: Wireless Dongle Type designation: RC30-0520, RC30-0520XXXX-XXXX(X can be 0-9 or A-Z) Trademark: RAZER That All versions of the Model RC30-0520 and RC30-0520XXXX-XXXX(X can be 0-9 or A-Z); are electrically equal except the following difference: 1. Only differ in the model name. 2.The system model number is RZ06-0520XXXX-XXXX.This system consists of Gaming Controller (Model: RZ06-0520) and Wireless Dongle (Model:RC30-0520), X can be 0-9 or A-Z. Date: 2024-07-06 Name: Johnsen Tia Telephone: 760 579 0180 E-mail: [email protected] Signature:

Wireless Dongle PID Silkscreen CAN ICES-003(B) / NMB-003(B) IC: 8092D-RC300520 FCC ID: RWO-RC300520 IFETEL: INRARCxx-xxxxx ANATEL ID: xxxxx-xx-xxxxx C-xxxxx Front Rear Rev2:0520NASA PID LABEL NA SA sku Model No.: RC30-0520 Wireless Dongle RAZER ™

Report No.: BTL-FCC SAR-1-2405C051 Page 1 of 27 FCC SAR Test Report FCC ID: RWO-RC300520 Project No. : 2405C051 Equipment : Wireless Dongle Brand Name : RAZER Test Model : RC30-0520 Series Model : RC30-0520XXXX-XXXX(X can be 0-9 or A-Z) Date of Receipt : May 10, 2024 Date of Test : May 13, 2024 ~ Jun. 01, 2024 Issued Date : Jul. 04, 2024 Report Version : R01 Test Sample : Engineering Sample No.: DG2024051021 Standard(s) : Please refer to page 2. Applicant : Razer Inc. Address : 9 Pasteur, Suite 100, Irvine, CA92618, USA Manufacturer : RAZER (ASIA-PACIFIC) PTE. LTD. Address : Razer SEA HQ, 1 One-north Crescent, #02-01, Singapore 138538 Factory : RAZER TECHNOLOGY AND DEVELOPMENT (SHENZHEN) CO., LTD Address : East Wing, 3rd Floor, Block 2, Phase 1 of Vision Shenzhen Business Park Keji South Road, Hi-Tech Industrial Park, Shenzhen 518057, China The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Justin Huang Approved by : Herbort Liu Room 108, Building 2, No.1, Yile Road, Songshan Lake Zone, Dongguan City, Guangdong, People’s Republic of China Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCC SAR-1-2405C051 Page 2 of 27 Standard(s) : IEEE Std C95.1:2019 IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 kHz to 300 GHz EN IEC/IEEE 62209-1528:2021 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1528: Human models, instrumentation, and procedures (Frequency range of 4 MHz to 10 GHz) KDB447498 D04 Interim General RF Exposure Guidance v01 KDB447498 D02 SAR Procedures for Dongle Xmtr v02 KDB865664 D01 SAR measurement 100 MHz to 6 GHz v01r04 KDB865664 D02 SAR Reporting v01r02 Report No.: BTL-FCC SAR-1-2405C051 Page 3 of 27 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCC SAR-1-2405C051 Page 4 of 27 Table of Contents Page REPORT ISSUED HISTORY 6 1 . GENERAL INFORMATION 7 1.1 STATEMENT OF COMPLIANCE 7 1.2 LABORATORY ENVIRONMENT 7 1.3 GENERAL DESCRIPTION OF EUT 7 1.4 MAIN TEST INSTRUMENTS 8 2 . RF EMISSIONS MEASUREMENT 9 2.1 TEST FACILITY 9 2.2 MEASUREMENT UNCERTAINTY 9 3 . SAR MEASUREMENTS SYSTEM CONFIGURATION 10 3.1 SAR MEASUREMENT SET-UP 10 3.1.1 TEST SETUP LAYOUT 10 3.2 DASY5 E-FIELD PROBE SYSTEM 11 3.2.1 PROBE SPECIFICATION 11 3.2.2 E-FIELD PROBE CALIBRATION 12 3.2.3 OTHER TEST EQUIPMENT 13 3.2.4 SCANNING PROCEDURE 14 3.2.5 SPATIAL PEAK SAR EVALUATION 15 3.2.6 DATA STORAGE AND EVALUATION 16 3.2.7 DATA EVALUATION BY SEMCAD 17 4 . SYSTEM VERIFICATION PROCEDURE 19 4.1 TISSUE VERIFICATION 19 4.2 SYSTEM CHECK 20 4.3 SYSTEM CHECK PROCEDURE 20 5 . SAR MEASUREMENT VARIABILITY AND UNCERTAINTY 21 5.1 SAR MEASUREMENT VARIABILITY 21 6 . OPERATIONAL CONDITIONS DURING TEST 22 6.1 TEST POSITION 22 6.2 TEST CONFIGURATION 22 6.2.1 WIFI TEST CONFIGURATION 22 7 . TEST RESULT 23 7.1 CONDUCTED POWER RESULTS 23 7.1.1 CONDUCTED POWER MEASUREMENTS OF 2.4G SRD 23 7.2 SAR TEST RESULTS 24 7.2.1 SAR MEASUREMENT RESULT 24 Report No.: BTL-FCC SAR-1-2405C051 Page 5 of 27 Table of Contents Page 8 MULTIPLE TRANSMITTER EVALUATION 25 APPENDIX 26 1. TEST LAYOUT 26 Appendix A. SAR Plots of System Verification Appendix B. SAR Plots of SAR Measurement Appendix C. Calibration Certificate Appendix D. Photographs of the Test Set-Up Report No.: BTL-FCC SAR-1-2405C051 Page 6 of 27 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-FCC SAR-1-2405C051 R00 Original Report. Jun. 11, 2024 Invalid BTL-FCC SAR-1-2405C051 R01 Update only the model difference description. Jul. 04, 2024 Valid Report No.: BTL-FCC SAR-1-2405C051 Page 7 of 27 1. GENERAL INFORMATION 1.1 STATEMENT OF COMPLIANCE Mode Highest Reported Body SAR-1g(W/kg) 2.4G SRD 0.120 Note: 1) The device is in compliance with Specific Absorption Rate (SAR) for general population uncontrolled exposure limits according to the FCC rule §2.10…

Text truncated - open the document above for the full version.

Report No.: BTL-FCC SAR-1-2405C051_Appendix A. Page 1 of 1 Test Laboratory: BTL Inc. Date: 2024/5/22 System Check_H2450_0522 DUT: Dipole 2450 MHz D2450V2;SN:919; Communication System: UID 0, CW (0); Frequency: 2450 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2450 MHz; σ = 1.82 S/m; ε r = 39.639; ρ = 1000 kg/m 3 Ambient Temperature：22.9 °C; Liquid Temperature：22.2 °C DASY Configuration: • Probe: EX3DV4 - SN7693; ConvF(8.33, 8.33, 8.33) @ 2450 MHz; Calibrated: 2023/10/31 • Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 • Electronics: DAE4 Sn1390; Calibrated: 2023/11/20 • Phantom: ELI v5.0_Left; Type: QDOVA002AA; Serial: TP:1222 • DASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 22.1 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 90.03 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 28.3 W/kg SAR(1 g) = 13.0 W/kg; SAR(10 g) = 5.89 W/kg Maximum value of SAR (measured) = 22.2 W/kg

Report No.: BTL-FCC SAR-1-2405C051_Appendix B. Page 1 of 1 Test Laboratory: BTL Inc. Date: 2024/5/22 W07_2.4G SRD_CH36_Horizontal Up_5mm DUT: USB Dongle; Communication System: UID 0, BT (0); Frequency: 2474 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2474 MHz; σ = 1.848 S/m; ε r = 39.553; ρ = 1000 kg/m 3 Ambient Temperature：22.9 °C; Liquid Temperature：22.2 °C DASY Configuration: • Probe: EX3DV4 - SN7693; ConvF(8.33, 8.33, 8.33) @ 2474 MHz; Calibrated: 2023/10/31 • Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 • Electronics: DAE4 Sn1390; Calibrated: 2023/11/20 • Phantom: ELI v5.0_Left; Type: QDOVA002AA; Serial: TP:1222 • DASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Area Scan (5x9x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.147 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.918 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 0.254 W/kg SAR(1 g) = 0.112 W/kg; SAR(10 g) = 0.052 W/kg Maximum value of SAR (measured) = 0.192 W/kg

Report No.: BTL-FCCP-1-2405C051 Page 1 of 53 FCC Radio Test Report FCC ID: RWO-RC300520 This report concerns: Original Grant Project No. : 2405C051 Equipment : Wireless Dongle Brand Name : RAZER Test Model : RC30-0520 Series Model : RC30-0520XXXX-XXXX(X can be 0-9 or A-Z) Applicant : Razer Inc. Address : 9 Pasteur, Suite 100, Irvine, CA92618, USA Manufacturer : RAZER (ASIA-PACIFIC) PTE. LTD. Address : Razer SEA HQ, 1 One-north Crescent, #02-01, Singapore 138538 Factory : RAZER TECHNOLOGY AND DEVELOPMENT (SHENZHEN) CO., LTD Address : East Wing, 3rd Floor, Block 2, Phase 1 of Vision Shenzhen Business Park Keji South Road, Hi-Tech Industrial Park, Shenzhen 518057, China Date of Receipt : May 10, 2024 Date of Test : May 10, 2024 ~ Jun. 04, 2024 Issued Date : Jul. 03, 2024 Report Version : R01 Test Sample : Sample No.: DG2024051018 for conducted, DG2024051019 for Others. Standard(s) : FCC CFR Title 47, Part 15, Subpart C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Evan Yang Approved by : Chay Cai Room 108, Building 2, No.1, Yile Road, Songshan Lake Zone, Dongguan City, Guangdong, People’s Republic of China. Tel: +86-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-1-2405C051 Page 2 of 53 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-2405C051 Page 3 of 53 Table of Contents Page REPORT ISSUED HISTORY 6 1 . APPLICABLE STANDARDS 7 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 2.3 TEST ENVIRONMENT CONDITIONS 9 3 . GENERAL INFORMATION 10 3.1 GENERAL DESCRIPTION OF EUT 10 3.2 DESCRIPTION OF TEST MODES 12 3.3 PARAMETERS OF TEST SOFTWARE 12 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 3.5 SUPPORT UNITS 13 3.6 CUSTOMER INFORMATION DESCRIPTION 13 4 . AC POWER LINE CONDUCTED EMISSIONS 14 4.1 LIMIT 14 4.2 TEST PROCEDURE 14 4.3 DEVIATION FROM TEST STANDARD 14 4.4 TEST SETUP 15 4.5 EUT OPERATING CONDITIONS 15 4.6 TEST RESULTS 15 5 . RADIATED EMISSIONS 16 5.1 LIMIT 16 5.2 TEST PROCEDURE 17 5.3 DEVIATION FROM TEST STANDARD 18 5.4 TEST SETUP 18 5.5 EUT OPERATING CONDITIONS 20 5.6 TEST RESULT - 9 KHZ TO 30 MHZ 20 5.7 TEST RESULT - 30 MHZ TO 1000 MHZ 20 5.8 TEST RESULT - ABOVE 1000 MHZ 20 6 . BANDWIDTH 21 6.1 LIMIT 21 Report No.: BTL-FCCP-1-2405C051 Page 4 of 53 Table of Contents Page 6.2 TEST PROCEDURE 21 6.3 DEVIATION FROM STANDARD 21 6.4 TEST SETUP 21 6.5 EUT OPERATION CONDITIONS 21 6.6 TEST RESULTS 21 7 . MAXIMUM OUTPUT POWER 22 7.1 LIMIT 22 7.2 TEST PROCEDURE 22 7.3 DEVIATION FROM STANDARD 22 7.4 TEST SETUP 22 7.5 EUT OPERATION CONDITIONS 22 7.6 TEST RESULTS 22 8 . CONDUCTED SPURIOUS EMISSION 23 8.1 LIMIT 23 8.2 TEST PROCEDURE 23 8.3 DEVIATION FROM STANDARD 23 8.4 TEST SETUP 23 8.5 EUT OPERATION CONDITIONS 23 8.6 TEST RESULTS 23 9 . POWER SPECTRAL DENSITY 24 9.1 LIMIT 24 9.2 TEST PROCEDURE 24 9.3 DEVIATION FROM STANDARD 24 9.4 TEST SETUP 24 9.5 EUT OPERATION CONDITIONS 24 9.6 TEST RESULTS 24 10 . MEASUREMENT INSTRUMENTS LIST 25 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 27 APPENDIX B - R ADI ATED EMISSION - 9 KHZ TO 30 MHZ 30 APPENDIX C - R ADI ATED EMISSION - 30 MHZ TO 1000 MHZ 35 APPENDIX D - R ADI ATED EMISSION - ABOVE 1000 MHZ 38 APPENDIX E - BANDWIDTH 46 Report No.: BTL-FCCP-1-2405C051 Page 5 of 53 Table of Contents Page APPENDIX F - MAXIMUM OUTPUT POWER 48 APPENDIX G - CONDUCTED SPURIOUS EMISSION 50 APPENDIX H - POWER SPECTRAL DENSITY 52 Report No.: BTL-FCCP-1-2405C051 Page 6 of 53 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-FCCP-1-2405C051 R00 Original Report. Jun. 12, 2024 Invalid BTL-FCCP-1-2405C051 R01 Update only the model difference description. Jul. 03, 2024 Val id Report No.: BTL-FCCP-1-2405C051 Page 7 of 53 1. APPLICABLE STANDARDS According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: ANSI C63.10-2013 The following reference test guidance is not within the scope of accreditation of A2LA: KDB 558074 D01 1…

Text truncated - open the document above for the full version.

Report No.:BTL-OTA-1-2403C073 Page 1 of 15 ANT Test Report Antenna Type:2.4G antenna EUT Photo Report No.:BTL-OTA-1-2403C073 Page 2 of 15 Project No. : 2403C073 Product Type : Wireless Dongle Brand Name : RAZER Test Model : RC30-0520 Date of Receipt : 2024-04-29 Date of Test : 2024-04-29 Issued Date : 2024-04-30 Report Version : R00 The delegate : Razer Applicant : Razer Inc. Address : 9 Pasteur, Suite 100, Irvine, CA92618, USA Manufacturer : Razer Inc. Address : 9 Pasteur, Suite 100, Irvine, CA92618, USA The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc.(Dongguan). Prepared by : Approved by : No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong, China. Tel: +86-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.:BTL-OTA-1-2403C073 Page 3 of 15 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by CNAS or any other agency. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.:BTL-OTA-1-2403C073 Page 4 of 15 Table of Contents REPORT ISSUED HISTORY ........................................................................................... 5 PHYSICAL LAYOUT AND SITE DESCRIPTION ............................................................ 6 WIRELESS MOBILE DEVICE TEST LABORATORY ................................................................................ 6 ANECHOIC CHAMBER .............................................................................................................................. 6 MULTI AXIS POSITIONING SYSTEM (MAPS™) ...................................................................................... 6 QUIET ZONE 7 EMCO MODEL 3165-01 ABSORBER NESTED DUAL-POLARIZED DUAL-VIVALDI ARRAY ANTENNA7 EMCO-3102 CIRCULARLY POLARIZED COMMUNICATION ANTENNAS ............................................. 7 TEST EQUIPMENT .................................................................................................................................... 7 EMQUEST SOFTWARE ............................................................................................................................. 7 TEMPERATURE, HUMIDITY .......................................................................................... 7 2.4G GAIN & PATTERN IRON ...................................................................................... 8 TEST EQUIPMENT LIST............................................................................................... 13 TEST EQUIPMENT USED FOR MEASURING ........................................................................................ 13 PHOTOGRAPH ............................................................................................................. 15 EUT SETUP PHOTO ................................................................................................................................ 15 Report No.:BTL-OTA-1-2403C073 Page 5 of 15 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-ANT-2403C175 R00 Original Report. 2024-04-30 - Report No.:BTL-OTA-1-2403C073 Page 6 of 15 PHYSICAL LAYOUT AND SITE DESCRIPTION WIRELESS MOBILE DEVICE TEST LABORATORY All tests were performed in BTL Inc. state-of-the-art Wireless Mobile Device Test Laboratory consisting of a rectangular anechoic chamber equipped with a multi-axis positioning system (MAPS), a dual polarized quad- ridge waveguide horn, and two EMCO-3102 circularly polarized communication antennas. A base station simulator is used to establish communication with the EUT and place it in the proper mode, and a spectrum analyzer and RF switch combination is used for measuring the signal from the EUT at each position and polarization. BTL Inc.’s EMQuest EMQ-100 Pattern Measurement Software is used for data acquisition, post- processing, and generation of the required output ANECHOIC CHAMBER The anechoic chamber is a rectangular anechoic chamber designed and built by ETS-Lindgren with the following nominal dimensions Length: 5.1 m (200 in) Width: 5.1 m (200 in) Height: 5.1 m (200 in) The anechoic chamber consists of a shielded enclosure constructed of rigid, steel-clad, wood core modular panels with steel framing. The chamber is treated with ETS…

Text truncated - open the document above for the full version.