RWO-RZ010360Gaming Mouse

. RAZER Gaming Mouse RZ01-0360 I M P O R T A N T P R O D U C T I NF O R M A T I O N G U I D E F O R G A M E R S . B Y G A M E R S. ™ 1 WHAT’S INSIDE  Razer Gaming Mouse A. DPI stage up button* B. DPI stage down button* C. Left mouse button D. Right mouse button E. Left tilt-click F. Scroll wheel G. Right tilt-click H. Scroll mode button  Free-Spin Scrolling mode  Tactile Cycling mode I. Status indicator J. 12-button thumb grid K. Razer HyperSpeed Wireless USB dongle L. PTFE mouse feet M. Slider switch  Bluetooth mode  Power off mode  Razer™ HyperSpeed Wireless (2.4 GHz) mode N. Razer Focus Pro 30K Optical Sensor *The DPI stages are 400, 800, 1600 (default), 3200, and 6400; and can be customized using Razer Synapse.  1 x AA battery  Important product information guide WHAT’S NEEDED LET’S GET YOU COVERED 1 x AND Windows 10 64-bit (or higher) USB Type A OR Register your product and score exclusive benefits razerid.razer.com/warranty Your product’s serial number can be found here. F O R G A M E R S . B Y G A M E R S. ™ 2 SETTING UP YOUR RAZER GAMING MOUSE INSERTING A BATTERY Caution: The included AA battery is non-rechargeable. Dispose of batteries in accordance with your local environmental laws. For your safety, use only lithium or alkaline batteries. CONNECTING YOUR MOUSE A. VIA RAZER™ HYPERSPEED WIRELESS (2.4 GHZ) MODE 1. F O R G A M E R S . B Y G A M E R S. ™ 3 2. 3. USB Type A F O R G A M E R S . B Y G A M E R S. ™ 4 B. VIA BLUETOOTH MODE 1. HYPERSPEED WIRELESS MODE (Connected - Solid green) F O R G A M E R S . B Y G A M E R S. ™ 5 2. 3. PRESS AND HOLD 3s BLUETOOTH MODE (Pairing – Blinking blue) F O R G A M E R S . B Y G A M E R S. ™ 6 Once paired, your Razer Naga V2 HyperSpeed will automatically reconnect to your device whenever in Bluetooth mode and within range. Keep your devices within close proximity of each other for a faster and more stable connection. PERSONALIZING YOUR MOUSE DPI Designated color Razer Naga V2 HyperSpeed BLUETOOTH MODE (Paired – Solid blue) F O R G A M E R S . B Y G A M E R S. ™ 7 Change your mouse’s DPI to match your playstyle with a press of the DPI stage up or DPI stage down buttons, or re- configure them to your favorite key binds using the Razer Synapse app. The status indicator will briefly change color to show which DPI stage is active. Install Razer Synapse when prompted or download the installer from razer.com/synapse Find out more about your ergonomic wireless MMO gaming mouse at support.razer.com 400 Red 800 Green 1600 (Default) Blue 3200 Cyan 6400 Yellow DPI stage up button DPI stage down button Status indicator F O R G A M E R S . B Y G A M E R S. ™ 8 SAFETY AND MAINTENANCE SAFETY GUIDELINES To achieve maximum safety while using your Razer Naga V2 HyperSpeed, we suggest that you adopt the following guidelines: Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for support. Don’t take apart the device, and don’t attempt to operate it under abnormal current loads. Doing so will void your warranty. Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug and/or switch off the device to stabilize the temperature to an optimal level. COMFORT Research has shown that long periods of repetitive motion, improper positioning of your computer peripherals, incorrect body position, and poor habits may be associated with physical discomfort and injury to nerves, tendons, and muscles. Below are some guidelines to avoid injury and ensure optimum comfort while using your Razer Naga V2 HyperSpeed.  Position your keyboard and monitor directly in front of you with your mouse next to it. Place your elbows next to your side, not too far away, and your keyboard within easy reach.  Adjust the height of your chair and table so that the keyboard and mouse are at or below elbow-height.  Keep your feet well supported, posture straight, and your shoulders relaxed.  During gameplay, relax your wrist and keep it straight. If you do the same tasks with your hands repeatedly, try not to bend, extend or twist your hands for long periods.  Don’t rest your wrists on hard surfaces for long periods. Use a wrist rest to support your wrist while gaming.  Don’t sit in the same position all day. Get up, step away from your desk and do exercises to stretch your arms, shoulders, neck, and legs. If you experience any physical discomfort while using your mouse, such as pain, numbness, or tingling in your hands, wrists, elbows, shoulders, neck, or back, please consult a qualified medical doctor immediately. F O R G A M E R S . B Y G A M E R S. ™ 9 MAINTENANCE AND USE The Razer Naga V2 HyperSpeed requires minimum maintenance to keep it in optimum condition. Once a month, we recommend you unplug the device from the computer and clean it using a soft cloth or cotton swab to prevent dirt buildup. Don’t use soap or harsh cleaning agents. To get the ultimate experience in movement and control, we highly recommend a premium mouse mat from Razer. Some surfaces will cause undue wear on the feet requiring constant care and eventual replacement. Do note that the sensor of the Razer Naga V2 HyperSpeed is ‘tuned’ or optimized specially for the Razer mouse mats. This means that the sensor has been tested extensively to confirm that the Razer Naga V2 HyperSpeed reads and tracks best on Razer mouse mats. F O R G A M E R S . B Y G A M E R S. ™ 10 LEGALESE COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION © 2022 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, “For Gamers. By Gamers.”, and “Powered by Razer Chroma” logo are trademarks or registered trademarks of Razer Inc. and/or affiliated companies in the United States or other countries. All other trademarks are the property of their respective owners. The Bluetooth…

Text truncated - open the document above for the full version.

RF_160, Issue 02 Razer Inc. Declaration of Authorization We Name: Razer Inc. Address: 9 Pasteur, Suite 100 City: Irvine State: California Country: United States Declare that: Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s): Product description: Gaming Mouse Type designation: RZ01-0360 , RZ01-0360XXXX-XXXX(X can be 0-9 or A-Z) Trademark: RAZER FCC ID : RWO-RZ010360 on our behalf. Date: 2022-11-02 City: Irvine Name: Johnsen Tia Function: Director, Regulatory & Compliance Signature: ............................... Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 10-Aug-09 RF_501, Issue 5 Page 1 of 1 Company Name: Razer Inc. Address : 9 Pasteur, Suite 100 City: Irvine California Country: United States To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: RWO-RZ010360 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: This document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor unfair advantage in the market. Planned Release Date STC: 180 days from date of grant (notes 2, 3, 4, 5) Date: 2022-11-02 Name and signature of applicant: Johnsen Tia Director, Regulatory & Compliance Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! FCC, Request for non-disclosure Date: 10-Aug-09 RF_501, Issue 5 Page 1 of 1 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Supplier’s Declar ation of Confor mity This device complie s with Part 15 of the FCC Rules. Operation is subject to the f ollowing two conditions: (1) This devi ce may not cause harmful interference, and (2) T his device must accept any interferen ce received, including interference that may cause undesired operation. Manufacturer: U.S. Responsible Party: Razer Inc., 9 Pasteur, Suite 100, Irvine, California 92618 United States Razer Inc., 9 Pasteur, Suite 100, Irvine, California 92618 United States Contact Person: Tel.: 760 579 0180 Fax: 760 579 0182 Email: [email protected] Internet: https://www.razer.com Model: RZ01-0360 , RZ01-0360XXXX-XXXX(X can be 0-9 or A-Z) Classification: FCC Part 15B We hereby declare that the equipment bearing the trade name and model number specified above was tested conforming to the applicable FCC rule part(s) 15B and the most accurat e measurement standards. We confirm that the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commission’s requirements. Date: 2022-11-02 ------ -------- --------------------- Johnsen Tia / Director, Regulatory & Compliance [email protected] RAZER INC. 9 Pasteur, Suite 100, Irvine, California 92618 United States

ReportNo.: BTL -ANT- 2206E011 Page 1 of 8 AntennaTest Report AntennaType:PCBAntenna The aboveequipmenthas been testedand found compliancewith the requirementof the relative standardsby BTL Inc. Preparedby : JamesHuang Add: No. 3 Jinshagang1st Rd. Shixia,DalangTown DongguanCity, Guangdong523792 People’s Republicof China. Tel: +86-769-8318-3000 Web: www.newbtl.com ReportNo.: BTL -ANT- 2206E011 Page 2 of 8 Tableof ContentsPage REPORTISSUEDHISTORY.........................................................................................3 2.4GGAIN& PATTERNNO IRON................................................................................4 ReportNo.:BTL-ANT-2206E011 Page 3 of 8 REPORTISSUEDHISTORY ReportNo.VersionDescriptionIssuedDateNote BTL-ANT-2206E01R00OriginalReport.2022-05-13Valid ReportNo.:BTL-ANT-2206E011 Page 4 of 8 2.4GGAIN&PATTERNNOIRON Frequency (MHz) Efficiency (%) Gain (dBi) 2400 55.781.72 2410 56.911.69 2420 55.251.46 2430 52.841.32 2440 52.861.53 2450 53.981.72 2460 54.951.68 2470 52.971.53 2480 52.261.50 2490 53.901.53 2500 57.391.59 ReportNo.:BTL-ANT-2206E011 Page 5 of 8 Theta=90° Phi=0° ReportNo.:BTL-ANT-2206E011 Page 6 of 8 H-Plane 3D ReportNo.:BTL-ANT-2206E011 Page 7 of 8 S11

Model Declaration Letter We, the undersigning company Company Name: Razer Inc. Address: 9 Pasteur, Suite 100, Irvine, CA92618, USA. Hereby confirm that the following products: Product description: Gaming Mouse Type designation: RZ01-0360, RZ01-0360XXXX-XXXX(X can be 0-9 or A-Z) Trademark: RAZER That All versions of the Model RZ01-0360, RZ01-0360XXXX-XXXX(X can be 0-9 or A-Z) are electrically equal except the following difference: It is the same as the basic model and X is used to define which country it is for under the same family series. X Can be 0-9 or A-Z. Date: 2022-11-02 Name: Johnsen Tia Telephone: 65 6571 6828 E-mail: [email protected] Signature:

Report No.: 2210TWE913-U1~U2, 2210TWE913-C1~C2 Product: Gaming Mouse Brand Name: RAZER Model Number: RZ01-0360 1 of 7 External Photograph (1) EUT Photo (2) EUT Photo Report No.: 2210TWE913-U1~U2, 2210TWE913-C1~C2 2 of 7 (3) EUT Photo (4) EUT Photo Report No.: 2210TWE913-U1~U2, 2210TWE913-C1~C2 3 of 7 (5) EUT Photo (6) EUT Photo Report No.: 2210TWE913-U1~U2, 2210TWE913-C1~C2 4 of 7 (7) Dongle (8) Dongle Report No.: 2210TWE913-U1~U2, 2210TWE913-C1~C2 5 of 7 (9) Dongle (10) Dongle Report No.: 2210TWE913-U1~U2, 2210TWE913-C1~C2 6 of 7 (11) Dongle (12) Dongle Report No.: 2210TWE913-U1~U2, 2210TWE913-C1~C2 7 of 7 (13) AA battery

Report No.: 2210TWE913-U1~U2, 2210TWE913-C1~C2 Product: Gaming Mouse Brand Name: RAZER Model Number: RZ01-0360 1 of 7 Internal Photograph (1) EUT Photo (2) EUT Photo Report No.: 2210TWE913-U1~U2, 2210TWE913-C1~C2 2 of 7 (3) EUT Photo (4) EUT Photo Report No.: 2210TWE913-U1~U2, 2210TWE913-C1~C2 3 of 7 (5) EUT Photo (6) EUT Photo Report No.: 2210TWE913-U1~U2, 2210TWE913-C1~C2 4 of 7 (7) EUT Photo (8) EUT Photo Report No.: 2210TWE913-U1~U2, 2210TWE913-C1~C2 5 of 7 (9) EUT Photo (10) EUT Photo Report No.: 2210TWE913-U1~U2, 2210TWE913-C1~C2 6 of 7 (11) EUT Photo (12) EUT Photo Report No.: 2210TWE913-U1~U2, 2210TWE913-C1~C2 7 of 7 (13) EUT Photo (14) EUT Photo

Razer Inc. Tune-up Procedure Subject: Tune-up procedure To whom it may concern: FCC ID: RWO-RZ010360 , Gaming Mouse requires no adjustment or tune up procedure except factory default setting. The output power setting of EUT is set in the factory and followed the max level in below: Yours sincerely, Signature: Contact person: Rose Liu/ Supervisor Date: 2022-11-02

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN22RE9O 001 Auftrags-Nr.: Order no.: 168396362 Seite 1 von 29 Page 1 of 29 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2022-10-27 Auftraggeber: Client: Razer Inc. 9 Pasteur, Suite 100, Irvine, CA92618, USA Prüfgegenstand: Test item: Gaming Mouse Bezeichnung / Typ-Nr.: Identification / Type no.: RZ01-0360 (Trademark: RAZER) Auftrags-Inhalt: Order content: FCC approval Prüfgrundlage: Test specification: FCC 47 CFR § 2.1093 IEEE Std 1528-2013 Published RF exposure KDB procedures Wareneingangsdatum: Date of sample receipt: 2022-09-27 Please refer to Photo Document Prüfmuster-Nr.: Test sample no: A003363302-001 Prüfzeitraum: Testing period: 2022-10-28 –2022-10-28 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Chris Chen genehmigt von: authorized by: X Signed by: Andy Yan Datum: Date: 2022-11-02 Ausstellungsdatum: Issue date: 2022-11-02 Stellung / Position: Section Manager Stellung / Position: Technical Certifier Sonstiges / Other: FCC ID: RWO-RZ010360 The system’s model name is RZ01-0360XXXX-XXXX (X: Can be 0-9, A-Z), and the system contains a Gaming Mouse (Model name:RZ01-0360) and USB Dongle (Model name: DGRFG7) Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (Shenzhen) Co., Ltd. 1601 R&D Room, 1602-1604, 17-18F, Building 7 Site C, Vanke Cloud City Phase I, Xingke First Street, Xili Street, Xili Community, Nanshan District, Shenzhen 518052, P.R. China Mail: [email protected] · Web: www.tuv.com Produkte Products Prüfbericht - Nr.: Test Report No. CN22RE9O 001 Seite 2 von 29 Page 2 of 29 Table of Contents 1. GENERAL INFORMATION ...................................................................................................................... 4 1.1. STATEMENT OF COMPLIANCE .............................................................................................................. 4 1.2. EQUIPMENT UNDER TEST (EUT) INFORMATION .................................................................................... 5 1.2.1. General Information...................................................................................................................... 5 1.2.2. Wireless Technologies ................................................................................................................. 5 2. TEST SITES ........................................................................................................................................ 6 2.1. TEST FACILITIES ................................................................................................................................. 6 2.2. AMBIENT CONDITION ........................................................................................................................... 6 2.3. LIST OF TEST AND MEASUREMENT INSTRUMENTS................................................................................. 7 3. MEASUREMENT UNCERTAINTY............................................................................................................. 8 4. TEST SPECIFICATION, METHODS AND PROCEDURES ............................................................................. 9 5. SAR MEASUREMENT SYSTEM ...........................................................................................................10 5.1. DEFINITION OF SPECIFIC ABSORPTION RATE (SAR) ...........................................................................10 5.2. SPEAG DASY SYSTEM ...................................................................................................................10 5.2.1. Robot ..........................................................................................................................................11 5.2.2. Probes ........................................................................................................................................12 5.2.3. Data Acquisition Electronics (DAE) ............................................................................................12 5.2.4. Phantoms ...................................................................................................................................13 5.2.5. Device Holder .............................................................................................................................14 5.2.6. System Validation Dipoles .........................................................................................................14 5.2.7. Tissue Simulating Liquids ..........................................................................................................15 5.2.8. SAR System Verification ............................................................................................................18 6. SAR MEASUREMENT PROCEDURE ..........................................................................…

Text truncated - open the document above for the full version.

Test Laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Date: 2022/10/28 System Check-D2450V2_H2450 DUT: Dipole 2450 MHz D2450V2 SN:1014 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: f = 2450 MHz; σ = 1.872 S/m; ε r = 38.155; ρ = 1000 kg/m 3 DASY5 Configuration: -Probe: EX3DV4 -SN7506; ConvF(7.85, 7.85, 7.85) @ 2450 MHz; Calibrated: 2022/5/31 -Sensor-Surface: 1.4mm (Mechanical Surface Detection) -Electronics: DAE4 Sn1557; Calibrated: 2022/1/20 -Phantom: SAM 1; Type: QD 000 P40 CB; Serial: 1961 -Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Pin=250 mW/Area Scan (71x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 22.8 W/kg Pin=250 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 113.2 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 27.8 W/kg SAR(1 g) = 13.4 W/kg; SAR(10 g) = 6.19 W/kg Smallest distance from peaks to all points 3 dB below = 8.9 mm Ratio of SAR at M2 to SAR at M1 = 48.8% Maximum value of SAR (measured) = 22.3 W/kg

Test Laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Date: 2022/10/28 P01 BLE_1M_Ch39_Rear Face_0cm DUT: EUT Communication System: BT; Frequency: 2480 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: f = 2480 MHz; σ = 1.895 S/m; ε r = 38.093; ρ = 1000 kg/m 3 DASY5 Configuration: -Probe: EX3DV4 -SN7506; ConvF(7.85, 7.85, 7.85) @ 2480 MHz; Calibrated: 2022/5/31 -Sensor-Surface: 1.4mm (Mechanical Surface Detection) -Electronics: DAE4 Sn1557; Calibrated: 2022/1/20 -Phantom: SAM 1; Type: QD 000 P40 CB; Serial: 1961 -Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) -Area Scan (81x121x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.0891 W/kg - Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.304 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.129 W/kg SAR(1 g) = 0.056 W/kg; SAR(10 g) = 0.027 W/kg Smallest distance from peaks to all points 3 dB below: Larger than measurement grid Ratio of SAR at M2 to SAR at M1 = 42.4% Maximum value of SAR (measured) = 0.0967 W/kg Test Laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Date: 2022/10/28 P02 2.4G SDR_2M_Ch78_Rear Face_0cm DUT: EUT Communication System: SDR; Frequency: 2480 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: f = 2480 MHz; σ = 1.895 S/m; ε r = 38.093; ρ = 1000 kg/m 3 DASY5 Configuration: -Probe: EX3DV4 -SN7506; ConvF(7.85, 7.85, 7.85) @ 2480 MHz; Calibrated: 2022/5/31 -Sensor-Surface: 1.4mm (Mechanical Surface Detection) -Electronics: DAE4 Sn1557; Calibrated: 2022/1/20 -Phantom: SAM 1; Type: QD 000 P40 CB; Serial: 1961 -Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) -Area Scan (81x121x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.101 W/kg - Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.660 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.136 W/kg SAR(1 g) = 0.057 W/kg; SAR(10 g) = 0.029 W/kg Smallest distance from peaks to all points 3 dB below = 8.5 mm Ratio of SAR at M2 to SAR at M1 = 41.7% Maximum value of SAR (measured) = 0.100 W/kg

Justification for Extended SAR Dipole Calibrations Dipole Date of Measurement Return Loss (dB) Delta (%) Impedance (ohm) Delta (ohm) Head 2450MHz May 19, 2021 -28.3 -2.71 53.8 -4.17 May 17, 2022 -27.5 49.7 Note: The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification results meet the requirement of extended calibration.

Produkte Products Appendix D CN22RE9O 001 Page 1 of 3 Photographs of EUT> Produkte Products Appendix D CN22RE9O 001 Page 2 of 3 <Antenna Location> EUT Top Side EUT Bottom Side EUT Right Side EUT Left Side <EUT Rear View> Produkte Products Appendix D CN22RE9O 001 Page 3 of 3 <Photographs of SAR Setup> Front Face of EUT with 0 cm Gap Rear Face of EUT with 0 cm Gap Left Side of EUT with 0 cm Gap Right Side of EUT with 0 cm Gap Top Side of EUT with 0 cm Gap Bottom Side of EUT with 0 cm Gap

MRT Technology (Taiwan) Co., Ltd Report No.: 2210TWE913-U1 Phone: +886-3-3288388 Report Version: 1.0 Fax: +886-3-3288918 Issue Date: 2022-10-28 Web: www.mrt-cert.com FCC ID: RWO-RZ010360 Page Number: 1 of 63 FCC ID : RWO-RZ010360 APPLICANT : Razer Inc. Application Type : Certification Product : Gaming Mouse Model No. : RZ01-0360 Serial Model No. : RZ01-0360XXXX-XXXX(X can be 0-9 or A-Z) Brand Name : RAZER, FCC Classification : (DTS) Digital Transmission System FCC Rule Part(s) : Part 15.247 Test Procedure(s) : ANSI C63.10-2013 Received Date : 2022/9/27 Test Date : 2022/9/28~2022/10/4 MEASUREMENT REPORT Tested By : ( Fran Chen ) Reviewed By : ( Paddy Chen ) Approved By : ( Chenz Ker) The test results only relate to the tested sample. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Taiwan) Co., Ltd. Report No.: 2210TWE913-U1 FCC ID: RWO-RZ010360 Page Number: 2 of 63 Revision History Report No. Version Description Issue Date Note 2210TWE913-U1 1.0 Original Report 2022-10-28 Report No.: 2210TWE913-U1 FCC ID: RWO-RZ010360 Page Number: 3 of 63 CONTENTS Description Page §2.1033 General Information ......................................................................................................... 5 1. INTRODUCTION ..................................................................................................................... 6 1.1. Scope .................................................................................................................................... 6 1.2. MRT Test Location ................................................................................................................ 6 2. PRODUCT INFORMATION ..................................................................................................... 7 2.1. Equipment Description .......................................................................................................... 7 2.2. Product Specification Subjective to this Standard .................................................................. 8 2.3. Test Mode ............................................................................................................................. 8 2.4. Operation Frequency / Channel List ...................................................................................... 9 2.5. Test Configuration ............................................................................................................... 10 2.6. Test Software ...................................................................................................................... 10 2.7. EMI Suppression Device(s)/Modifications ........................................................................... 10 2.8. Labeling Requirements ....................................................................................................... 10 3. DESCRIPTION of TEST ......................................................................................................... 11 3.1. Evaluation Procedure .......................................................................................................... 11 3.2. AC Line Conducted Emissions ............................................................................................ 11 3.3. Radiated Emissions ............................................................................................................ 12 4. ANTENNA REQUIREMENTS ................................................................................................ 13 5. TEST EQUIPMENT CALIBRATION DATE ............................................................................ 14 6. MEASUREMENT UNCERTAINTY ......................................................................................... 15 7. TEST RESULT ...................................................................................................................... 16 7.1. Summary ............................................................................................................................. 16 7.2. 6dB Bandwidth Measurement ............................................................................................. 17 7.2.1. Test Limit ......................................................................................................................... 17 7.2.2. Test Procedure used ....................................................................................................... 17 7.2.3. Test Setting ..................................................................................................................... 17 7.2.4. Test Setup ....................................................................................................................... 17 7.2.5. Test Result ...................................................................................................................... 18 7.3. Output Power Measurement ................................................................................................ 20 7.3.1. Test Limit ......................................................................................................................... 20 7.3.2. Test Procedure Used ....................................................................................................... 20 7.3.3. Test Setting ...........................................................................…

Text truncated - open the document above for the full version.