RWO-RZ010462Gaming Mouse

. GAMING MOUSE RZ01-0462 IMPORTANT PRODUCT INFORMATION GUIDE WHAT’S INSIDE / WHAT’S NEEDED WHAT’S INSIDE  Gaming Mouse RZ01-0462 A. Left mouse button B. Right mouse button C. Razer™ HyperScroll Tilt Wheel D. Scroll mode button  Free-Spin Scrolling mode  Tactile Cycling mode E. DPI cycle button* F. Multi-function trigger G. Mouse button 5 H. Mouse button 4 I. USB-C port J. Ultraslick mouse feet K. Slider switch  Bluetooth mode  Power off mode  Razer™ HyperSpeed Wireless (2.4 GHz) mode L. Razer™ Focus+ 30K DPI Optical Sensor M. Profile indicator N. Profile button O. Wireless USB dongle compartment / Compartment cover** P. Wireless USB dongle [PLACEHOLDER IMAGES] FOR GAMERS. BY GAMERS. ™ 1 *The DPI stages are: 400, 800, 1600 (default), 3200, and 6400; and can be customized using Razer Synapse. **Interchangeable with the Razer Charging Puck cover for wireless charging via Razer Zia (each sold separately). WHAT’S NEEDED LET’S GET YOU COVERED Register your product and score exclusive benefits razerid.razer.com/warranty GETTING STARTED CHARGING YOUR MOUSE For best results, please fully charge the mouse before using it for the first time. CONNECTING YOUR MOUSE A. VIA WIRED MODE Install Razer Synapse when prompted or download the installer from razer.com/synapse B. VIA RAZER™ HYPERSPEED WIRELESS (2.4 GHz) MODE 1. USB-A USB-A FOR GAMERS. BY GAMERS. ™ 4 2. 3. The Razer gaming mouse RZ01-0462 is now ready for use in 2.4 GHz wireless mode. C. VIA BLUETOOTH MODE 1. 2. USB-A FOR GAMERS. BY GAMERS. ™ 5 3. 4. Pairing Paired FOR GAMERS. BY GAMERS. ™ 6 Once paired, the Razer gaming mouse will automatically reconnect to your device whenever in Bluetooth mode and within range. Keep the pairing devices within close proximity of each other for faster and more stable connection. The Razer gaming mouse is now ready for use in Bluetooth mode. Find out more about your feature-packed wireless gaming mouse at support.razer.com SAFETY AND MAINTENANCE SAFETY GUIDELINES In order to achieve maximum safety while using your Razer gaming mouse we suggest that you adopt the following guidelines: Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for support. Do not take apart the device and do not attempt to operate it under abnormal current loads. Doing so will void your warranty. FOR GAMERS. BY GAMERS. ™ 7 Keep the device away from liquid, humidity or moisture. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug and/or switch off the device in order to let the temperature stabilize to an optimal level. COMFORT Research has shown that long periods of repetitive motion, improper positioning of your computer peripherals, incorrect body position, and poor habits may be associated with physical discomfort and injury to nerves, tendons, and muscles. Below are some guidelines to avoid injury and ensure optimum comfort while using your Razer gaming mouse.  Position your keyboard and monitor directly in front of you with your mouse next to it. Place your elbows next to your side, not too far away and your keyboard within easy reach.  Adjust the height of your chair and table so that the keyboard and mouse are at or below elbow-height.  Keep your feet well supported, posture straight and your shoulders relaxed.  During gameplay, relax your wrist and keep it straight. If you do the same tasks with your hands repeatedly, try not to bend, extend or twist your hands for long periods.  Do not rest your wrists on hard surfaces for long periods. Use a wrist rest to support your wrist while gaming.  Do not sit in the same position all day. Get up, step away from your desk and do exercises to stretch your arms, shoulders, neck and legs. If you should experience any physical discomfort while using your mouse, such as pain, numbness, or tingling in your hands, wrists, elbows, shoulders, neck or back, please consult a qualified medical doctor immediately. MAINTENANCE AND USE The Razer gaming mouse requires minimum maintenance to keep it in optimum condition. Once a month we recommend you unplug the device from the computer and clean it using a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents. To get the ultimate experience in movement and control, we highly recommend a premium mouse mat from Razer. Some surfaces will cause undue wear on the feet requiring constant care and eventual replacement. Do note that the sensor of the Razer gaming mouse is ‘tuned’ or optimized especially for the Razer mouse mats. This means that the sensor has been tested extensively to confirm that the Razer gaming mouse reads and tracks best on Razer mouse mats. FOR GAMERS. BY GAMERS. ™ 8 BATTERY WARNING The Razer gaming mouse contains a Li-ion rechargeable battery. In general, the life expectancy of such batteries is dependent upon usage. If you suspect that the Li-ion rechargeable battery inside the Razer gaming mouse may be drained (has a low charge), try charging it. Caution: Do not open, mutilate, or expose to conducting materials (metal), moisture, liquid, fire, or heat. Doing so may cause batteries to leak or explode, resulting in personal injury. Battery life varies with usage. FOR GAMERS. BY GAMERS. ™ 9 LEGALESE COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION ©2021 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, “For Gamers. By Gamers.”, and “Razer Chroma” logo are trademarks or registered trademarks of Razer Inc. or affiliated companies in the United States and other countries. All other trademarks are the property of their respective owners. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Razer is under license. USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum. Windows and the Windows l…

Text truncated - open the document above for the full version.

RF_160, Issue 02 Razer Inc. Declaration of Authorization We Name: Razer Inc. Address: 9 Pasteur, Suite 100 City: Irvine State: California Country: United States Declare that: Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s): Product description: Gaming Mouse Type designation: RZ01-0462, RZ01-0462XXXX-XXXX(X can be 0-9 or A-Z) Trademark: RAZER, FCC ID : RWO-RZ010462 on our behalf. Date: 2022-08-08 City: Irvine Name: Johnsen Tia Function: Senior Director, Regulatory & Compliance Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 10-Aug-09 RF_501, Issue 5 Page 1 of 1 Company Name: Razer Inc. Address: 9 Pasteur, Suite 100 City: Irvine California Country: United States To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: RWO-RZ010462 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: This document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor unfair advantage in the market. Planned Release Date STC: 180 days from date of grant (notes 2, 3, 4, 5) Date: 2022-08-08 Name and signature of applicant: Johnsen Tia Director, Regulatory & Compliance Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! FCC, Request for non-disclosure Date: 10-Aug-09 RF_501, Issue 5 Page 1 of 1 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Model Declaration Letter We, the undersigning company Company Name: Razer Inc. Address: 9 Pasteur, Suite 100, Irvine, CA92618, USA Hereby confirm that the following products: Product description: Gaming Mouse Type designation: RZ01-0462, RZ01-0462XXXX-XXXX(X can be 0-9 or A-Z) Trademark: RAZER， That All versions of the Model RZ01-0462 and RZ01-0462XXXX-XXXX(X can be 0-9 or A-Z); are electrically equal except the following difference: It is the same as the basic model and X is used to define which country it is for under the same family series. Date: 2022-08-08 Name: Johnsen Tia Telephone: 760 579 0180 E-mail: [email protected] Signature:

Project No.: 2201C024 Page 1 of 18 ATTACHMENT PHOTOGRAPHS OF EUT Project No.: 2201C024 Page 2 of 18 Project No.: 2201C024 Page 3 of 18 Project No.: 2201C024 Page 4 of 18 Project No.: 2201C024 Page 5 of 18 Project No.: 2201C024 Page 6 of 18 Project No.: 2201C024 Page 7 of 18 Project No.: 2201C024 Page 8 of 18 Project No.: 2201C024 Page 9 of 18 Project No.: 2201C024 Page 10 of 18

Project No.: 2201C024 Page 11 of 18 Project No.: 2201C024 Page 12 of 18 Project No.: 2201C024 Page 13 of 18 Project No.: 2201C024 Page 14 of 18 Project No.: 2201C024 Page 15 of 18 Project No.: 2201C024 Page 16 of 18 Project No.: 2201C024 Page 17 of 18 Project No.: 2201C024 Page 18 of 18

Report No.: BTL-FCCP-3-2201C024 Page 1 of 5 FCC RF EXPOSURE REPORT FCC ID: RWO-RZ010462 Project No. : 2201C024 Equipment : Gaming Mouse Brand Name : RAZER Test Model : RZ01-0462 Series Model : RZ01-0462XXXX-XXXX(X can be 0-9 or A-Z) Applicant : Razer Inc. Address : 9 Pasteur, Suite 100, Irvine, CA92618, USA Manufacturer : Razer (Asia-Pacific) Pte.,Ltd. Address : 1 one-north Crescent, #02-01 Singapore 138538 Factory : RAZER TECHNOLOGY AND DEVELOPMENT (SHENZHEN) CO., LTD Address : East Wing, 3rd Floor, Block 2, Phase 1 of Vision Shenzhen Business Park Keji South Road, Hi-Tech Industrial Park, Shenzhen 518057, China Date of Receipt : Jan. 07, 2022 Date of Test : Jan. 10, 2022 ~ Mar. 18, 2022 Issued Date : Apr. 25, 2022 Report Version : R00 Test Sample : Sample No.: DG20220107118 Standard(s) : FCC Part 1.1307 & KDB447498 D01 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Evan Yang Approved by : Welly Zhou Add: No. 3 Jinshagang 1st Rd. Shixia, Dalang Town Dongguan City, Guangdong 523792 People’s Republic of China Tel: +86-769-8318-3000 Web: www.newbtl.com Report No.: BTL-FCCP-3-2201C024 Page 2 of 5 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. Apr. 25, 2022 Report No.: BTL-FCCP-3-2201C024 Page 3 of 5 1. TEST FACILITY The test facilities used to collect the test data in this report is at the location of No. 3 Jinshagang 1st Rd. Shixia, Dalang Town Dongguan City, Guangdong 523792 People’s Republic of China. BTL's Registration Number for FCC: 357015 BTL's Designation Number for FCC: CN1240 2. GENERAL CONCULUSION According to FCC §§1.1307 and KDB 447498 D01, the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold P th (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). P th is given by: Table B2-Example Power Thresholds (mW) Frequency (MHz) Distance(mm) mW 5 10 15 20 25 30 35 40 45 50 300 39 65 88 110 129 148 166 184 201 217 450 22 44 67 89 112 135 158 180 203 226 835 9 25 44 66 90 116 145 175 207 240 1900 3 12 26 44 66 92 122 157 195 236 2450 3 10 22 38 59 83 111 143 179 219 3600 2 8 18 32 49 71 96 125 158 195 5800 1 6 14 25 40 58 80 106 136 169 Report No.: BTL-FCCP-3-2201C024 Page 4 of 5 In the case of fixed RF sources operating in the same time-averaging period, or of multiple mobile or portable RF sources within a device operating in the same time averaging period, if the sum of the fractional contributions to the applicable thresholds is less than or equal to 1 as indicated in the following equation. Where: a = number of fixed, mobile, or portable RF sources claiming exemption using paragraph (b)(3)(i)(B) of this section for Pth, including existing exempt transmitters and those being added. b = number of fixed, mobile, or portable RF sources claiming exemption using paragraph (b)(3)(i)(C) of this section for Threshold ERP, including existing exempt transmitters and those being added. c = number of existing fixed, mobile, or portable RF sources with known evaluation for the specified minimum distance including existing evaluated transmitters. P i = the available maximum time-averaged power or the ERP, whichever is greater, for fixed, mobile, or portable RF source i at a distance between 0.5 cm and 40 cm (inclusive). P th,i = the exemption threshold power (P th ) according to paragraph (b)(3)(i)(B) of this section for fixed, mobile, or portable RF source i. ERP j = the ERP of fixed, mobile, or portable RF source j. ERP th,j = exemption threshold ERP for fixed, mobile, or portable RF source j, at a distance of at least λ/2π according to the applicable formula of paragraph (b)(3)(i)(C) of this section. Evaluated k = the maximum reported SAR or MPE of fixed, mobile, or portable RF source k either in the device or at the transmitter site from an existing evaluation at the location of exposure. Exposure Limit k = either the general population/uncontrolled maximum permissible exposure (MPE) or specific absorption rate (SAR) limit for each fixed, mobile, or portable RF source k, as applicable from §1.1310 of this chapter. Report No.: BTL-FCCP-3-2201C024 Page 5 of 5 3. TABLE FOR FILED ANTENNA Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A PCB N/A 1.99 Note: The antenna gain is provided by the manufacturer. 4. TEST RESULTS Tune up tolerance (dBm) LE 2.4G SRD ≤5.00 ≤5.00 For LE: Frequency (MHz) Max Tune-up power (dBm) Max Tune-up power (mW) Result P th (mW) 2480 5.00 3.16 Pass 5.00 For 2.4G SRD: Frequency (MHz) Max Tune-up power (dBm) Max Tune-up power (mW) Result P th (mW) 2480 5.00 3.16 Pass 5.00 Note: (1) Output power including tune up tolerance. (2) The power is under the P th , the SAR evaluation is not required. (3) The calculated distance is 5mm. End of Test Report

Report No.: BTL-FCCP-2-2201C024 Page 1 of 58 FCC Radio Test Report FCC ID: RWO-RZ010462 This report concerns: Original Grant Project No. : 2201C024 Equipment : Gaming Mouse Brand Name : RAZER Test Model : RZ01-0462 Series Model : RZ01-0462XXXX-XXXX(X can be 0-9 or A-Z) Applicant : Razer Inc. Address : 9 Pasteur, Suite 100, Irvine, CA92618, USA Manufacturer : Razer (Asia-Pacific) Pte.,Ltd. Address : 1 one-north Crescent, #02-01 Singapore 138538 Factory : RAZER TECHNOLOGY AND DEVELOPMENT (SHENZHEN) CO., LTD Address : East Wing, 3rd Floor, Block 2, Phase 1 of Vision Shenzhen Business Park Keji South Road, Hi-Tech Industrial Park, Shenzhen 518057, China Date of Receipt : Jan. 07, 2022 Date of Test : Jan. 10, 2022 ~ Mar. 18, 2022 Issued Date : Apr. 25, 2022 Report Version : R00 Test Sample : Sample No.: DG20220107118 for conducted, DG20220107120 for radiated. Standard(s) : FCC CFR Title 47, Part 15, Subpart C FCC KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10-2013 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Evan Yang Approved by : Welly Zhou Add: No. 3 Jinshagang 1st Rd. Shixia, Dalang Town Dongguan City, Guangdong 523792 People’s Republic of China Te l : +86-769-8318-3000 Web: www.newbtl.com Report No.: BTL-FCCP-2-2201C024 Page 2 of 58 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-2-2201C024 Page 3 of 58 Table of Contents Page REPORT ISSUED HISTORY 6 1 . SUMMARY OF TEST RESULTS 7 1.1 TEST FACILITY 8 1.2 MEASUREMENT UNCERTAINTY 8 1.3 TEST ENVIRONMENT CONDITIONS 9 2 . GENERAL INFORMATION 10 2.1 GENERAL DESCRIPTION OF EUT 10 2.2 DESCRIPTION OF TEST MODES 12 2.3 PARAMETERS OF TEST SOFTWARE 12 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 2.5 SUPPORT UNITS 14 3 . AC POWER LINE CONDUCTED EMISSIONS 15 3.1 LIMIT 15 3.2 TEST PROCEDURE 15 3.3 DEVIATION FROM TEST STANDARD 15 3.4 TEST SETUP 16 3.5 EUT OPERATING CONDITIONS 16 3.6 TEST RESULTS 16 4 . RADIATED EMISSIONS 17 4.1 LIMIT 17 4.2 TEST PROCEDURE 18 4.3 DEVIATION FROM TEST STANDARD 19 4.4 TEST SETUP 19 4.5 EUT OPERATING CONDITIONS 20 4.6 TEST RESULT - 9 KHZ TO 30 MHZ 20 4.7 TEST RESULT - 30 MHZ TO 1000 MHZ 20 4.8 TEST RESULT - ABOVE 1000 MHZ 20 5 . BANDWIDTH 21 5.1 LIMIT 21 5.2 TEST PROCEDURE 21 5.3 DEVIATION FROM STANDARD 21 5.4 TEST SETUP 21 Report No.: BTL-FCCP-2-2201C024 Page 4 of 58 Table of Contents Page 5.5 EUT OPERATION CONDITIONS 21 5.6 TEST RESULTS 21 6 . MAXIMUM OUTPUT POWER 22 6.1 LIMIT 22 6.2 TEST PROCEDURE 22 6.3 DEVIATION FROM STANDARD 22 6.4 TEST SETUP 22 6.5 EUT OPERATION CONDITIONS 22 6.6 TEST RESULTS 22 7 . CONDUCTED SPURIOUS EMISSION 23 7.1 LIMIT 23 7.2 TEST PROCEDURE 23 7.3 DEVIATION FROM STANDARD 23 7.4 TEST SETUP 23 7.5 EUT OPERATION CONDITIONS 23 7.6 TEST RESULTS 23 8 . POWER SPECTRAL DENSITY 24 8.1 LIMIT 24 8.2 TEST PROCEDURE 24 8.3 DEVIATION FROM STANDARD 24 8.4 TEST SETUP 24 8.5 EUT OPERATION CONDITIONS 24 8.6 TEST RESULTS 24 9 . MEASUREMENT INSTRUMENTS LIST 25 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 27 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 30 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 35 APPENDIX D - RADIATED EMISSION - ABOVE 1000 MHZ 38 APPENDIX E - BANDWIDTH 51 APPENDIX F - MAXIMUM OUTPUT POWER 53 APPENDIX G - CONDUCTED SPURIOUS EMISSION 55 Report No.: BTL-FCCP-2-2201C024 Page 5 of 58 Table of Contents Page APPENDIX H - POWER SPECTRAL DENSITY 57 Report No.: BTL-FCCP-2-2201C024 Page 6 of 58 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. Apr. 25, 2022 Report No.: BTL-FCCP-2-2201C024 Page 7 of 58 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC CFR Title 47, Part 15, Subpart C Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Line Conducted Emissions APPENDIX A PASS ------ 15.247(d) 15.205(a) 15.209(a) Radiated Emissions APPENDIX B APPENDIX C APPENDIX D PASS ------ 15.247(a)(2) Bandwidth APPENDIX E PASS ------ 15.247(b)(3) Maximum Output Power APPENDIX F PASS ------ 15.247(d) Conducted Spurious Emission APPENDIX G…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-2201C024 Page 1 of 72 FCC Radio Test Report FCC ID: RWO-RZ010462 This report concerns: Original Grant Project No. : 2201C024 Equipment : Gaming Mouse Brand Name : RAZER Test Model : RZ01-0462 Series Model : RZ01-0462XXXX-XXXX(X can be 0-9 or A-Z) Applicant : Razer Inc. Address : 9 Pasteur, Suite 100, Irvine, CA92618, USA Manufacturer : Razer (Asia-Pacific) Pte.,Ltd. Address : 1 one-north Crescent, #02-01 Singapore 138538 Factory : RAZER TECHNOLOGY AND DEVELOPMENT (SHENZHEN) CO., LTD Address : East Wing, 3rd Floor, Block 2, Phase 1 of Vision Shenzhen Business Park Keji South Road, Hi-Tech Industrial Park, Shenzhen 518057, China Date of Receipt : Jan. 07, 2022 Date of Test : Jan. 10, 2022 ~ Mar. 18, 2022 Issued Date : Apr. 25, 2022 Report Version : R00 Test Sample : Sample No.: DG20220107118 for conducted, DG20220107120 for radiated. Standard(s) : FCC CFR Title 47, Part 15, Subpart C FCC KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10-2013 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Evan Yang Approved by : Welly Zhou Add: No. 3 Jinshagang 1st Rd. Shixia, Dalang Town Dongguan City, Guangdong 523792 People’s Republic of China Te l : +86-769-8318-3000 Web: www.newbtl.com Report No.: BTL-FCCP-1-2201C024 Page 2 of 72 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-2201C024 Page 3 of 72 Table of Contents Page REPORT ISSUED HISTORY 6 1 . SUMMARY OF TEST RESULTS 7 1.1 TEST FACILITY 8 1.2 MEASUREMENT UNCERTAINTY 8 1.3 TEST ENVIRONMENT CONDITIONS 9 2 . GENERAL INFORMATION 10 2.1 GENERAL DESCRIPTION OF EUT 10 2.2 DESCRIPTION OF TEST MODES 12 2.3 PARAMETERS OF TEST SOFTWARE 12 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 2.5 SUPPORT UNITS 14 3 . AC POWER LINE CONDUCTED EMISSIONS 15 3.1 LIMIT 15 3.2 TEST PROCEDURE 15 3.3 DEVIATION FROM TEST STANDARD 15 3.4 TEST SETUP 16 3.5 EUT OPERATING CONDITIONS 16 3.6 TEST RESULTS 16 4 . RADIATED EMISSIONS 17 4.1 LIMIT 17 4.2 TEST PROCEDURE 18 4.3 DEVIATION FROM TEST STANDARD 19 4.4 TEST SETUP 19 4.5 EUT OPERATING CONDITIONS 20 4.6 TEST RESULT - 9 KHZ TO 30 MHZ 20 4.7 TEST RESULT - 30 MHZ TO 1000 MHZ 20 4.8 TEST RESULT - ABOVE 1000 MHZ 20 5 . BANDWIDTH 21 5.1 LIMIT 21 5.2 TEST PROCEDURE 21 5.3 DEVIATION FROM STANDARD 21 5.4 TEST SETUP 21 Report No.: BTL-FCCP-1-2201C024 Page 4 of 72 Table of Contents Page 5.5 EUT OPERATION CONDITIONS 21 5.6 TEST RESULTS 21 6 . MAXIMUM OUTPUT POWER 22 6.1 LIMIT 22 6.2 TEST PROCEDURE 22 6.3 DEVIATION FROM STANDARD 22 6.4 TEST SETUP 22 6.5 EUT OPERATION CONDITIONS 22 6.6 TEST RESULTS 22 7 . CONDUCTED SPURIOUS EMISSION 23 7.1 LIMIT 23 7.2 TEST PROCEDURE 23 7.3 DEVIATION FROM STANDARD 23 7.4 TEST SETUP 23 7.5 EUT OPERATION CONDITIONS 23 7.6 TEST RESULTS 23 8 . POWER SPECTRAL DENSITY 24 8.1 LIMIT 24 8.2 TEST PROCEDURE 24 8.3 DEVIATION FROM STANDARD 24 8.4 TEST SETUP 24 8.5 EUT OPERATION CONDITIONS 24 8.6 TEST RESULTS 24 9 . MEASUREMENT INSTRUMENTS LIST 25 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 27 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 30 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 35 APPENDIX D - RADIATED EMISSION - ABOVE 1000 MHZ 38 APPENDIX E - BANDWIDTH 63 APPENDIX F - MAXIMUM OUTPUT POWER 66 APPENDIX G - CONDUCTED SPURIOUS EMISSION 68 Report No.: BTL-FCCP-1-2201C024 Page 5 of 72 Table of Contents Page APPENDIX H - POWER SPECTRAL DENSITY 71 Report No.: BTL-FCCP-1-2201C024 Page 6 of 72 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. Apr. 25, 2022 Report No.: BTL-FCCP-1-2201C024 Page 7 of 72 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC CFR Title 47, Part 15, Subpart C Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Line Conducted Emissions APPENDIX A PASS ------ 15.247(d) 15.205(a) 15.209(a) Radiated Emissions APPENDIX B APPENDIX C APPENDIX D PASS ------ 15.247(a)(2) Bandwidth APPENDIX E PASS ------ 15.247(b)(3) Maximum Output Power APPENDIX F PASS ------ 15.247(d) Conducted Spurious Emission APPENDIX G…

Text truncated - open the document above for the full version.

Report No.: 2 201C024 Page 1 of 6 EUT TEST PHOTO Report No.: 2 201C024 Page 2 of 6 AC Power Line Conducted Emissions Test Photos Report No.: 2 201C024 Page 3 of 6 Radiated Emissions Test Photos 9 kHz to 30 MHz Report No.: 2 201C024 Page 4 of 6 Radiated Emissions Test Photos 30 MHz to 1000 MHz Report No.: 2 201C024 Page 5 of 6 Radiated Emissions Test Photos Above 1 GHz Report No.: 2 201C024 Page 6 of 6