RWO-RZ010466Gaming Mouse

. RAZER GAMING MOUSE RZ01-0466 IMPORTANT PRODUCT INFORMATION GUIDE WHAT'S INSIDE  Razer Gaming Mouse A. Left mouse button B. Right mouse button C. Scroll wheel D. DPI cycle up button* E. DPI cycle down button* F. Mouse button 5 G. Mouse button 4 H. USB Type C port I. PTFE mouse feet J. Profile indicator K. Profile button L. Razer TM Focus Pro 30K Optical Sensor M. Slider switch • Bluetooth mode • Power off mode • Razer™ HyperSpeed Wireless (2.4 GHz) mode N. Wireless USB dongle compartment / Cover puck** FOR GAMERS. BY GAMERS. ™ 1 *The DPI stages are 400, 800, 1600 (default), 3200, and 6400, and can be customized using Razer Synapse. **Interchangeable with the Razer Wireless Charging Puck for wireless charging via Razer Mouse Dock Pro (each sold separately).  Wireless USB dongle + USB dongle adapter  USB Type A to USB Type C Speedflex cable  Important Product Information Guide WHAT'S NEEDED LET'S GET YOU COVERED Register your product and score exclusive benefits razerid.razer.com/warranty Your product’s serial number can be found here. 5. SETTING UP YOUR RAZER GAMING MOUSE CHARGING YOUR MOUSE For best results, please fully charge the mouse before using it for the first time. Install Razer Synapse when prompted, or download the installer from razer.com/synapse CONNECTING YOUR MOUSE A. Via wired mode USB Type A Red USB Type A Orange Yellow Green Breathing Static 0% 100% MOUSE CHARGING STATUS (4 HOURS) FOR GAMERS. BY GAMERS. ™ 2 B. Via Razer™ HyperSpeed Wireless (2.4 GHz) mode 1. 2. Your Razer Gaming Mouse is now ready for use in Razer HyperSpeed Wireless (2.4 GHz) mode. OR USB Type A FOR GAMERS. BY GAMERS. ™ 3 C. Via Bluetooth mode 1. 2. 3. BLUETOOTH MODE (Pairing - Blinking blue) Razer Gaming Mouse 3s Press and hold FOR GAMERS. BY GAMERS. ™ 4 4. The Razer Gaming Mouse is now ready for use in Bluetooth mode. BLUETOOTH MODE (Paired - Solid blue) FOR GAMERS. BY GAMERS. ™ 5 SAFETY AND MAINTENANCE SAFETY GUIDELINES To achieve maximum safety while using your Razer Gaming Mouse, we suggest that you adopt the following guidelines: Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for support. Don't take apart the device, and don't attempt to operate it under abnormal current loads. Doing so will void your warranty. Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug and/or switch off the device to stabilize the temperature to an optimal level. COMFORT Research has shown that long periods of repetitive motion, improper positioning of your computer peripherals, incorrect body position, and poor habits may be associated with physical discomfort and injury to nerves, tendons, and muscles. Below are some guidelines to avoid injury and ensure optimum comfort while using your Razer Gaming Mouse.  Position your keyboard and monitor directly in front of you with your mouse next to it. Place your elbows next to your side, not too far away, and your keyboard within easy reach.  Adjust the height of your chair and table so that the keyboard and mouse are at or below elbow-height.  Keep your feet well supported, posture straight, and your shoulders relaxed.  During gameplay, relax your wrist and keep it straight. If you do the same tasks with your hands repeatedly, try not to bend, extend or twist your hands for long periods.  Don't rest your wrists on hard surfaces for long periods. Use a wrist rest to support your wrist while gaming.  Don't sit in the same position all day. Get up, step away from your desk and do exercises to stretch your arms, shoulders, neck, and legs. If you experience any physical discomfort while using your mouse, such as pain, numbness, or tingling in your hands, wrists, elbows, shoulders, neck, or back, please consult a qualified medical doctor immediately. FOR GAMERS. BY GAMERS. ™ 6 MAINTENANCE AND USE The Razer Gaming Mouse requires minimum maintenance to keep it in optimum condition. Once a month, we recommend you unplug the device from the computer and clean it using a soft cloth or cotton swab to prevent dirt buildup. Don't use soap or harsh cleaning agents. To get the ultimate experience in movement and control, we highly recommend a premium mouse mat from Razer. Some surfaces will cause undue wear on the feet requiring constant care and eventual replacement. Do note that the Razer Gaming Mouse 's sensor is 'tuned' or optimized specially for the Razer mouse mats. This means that the sensor has been tested extensively to confirm that the Razer Gaming Mouse reads and tracks best on Razer mouse mats. BATTERY WARNING The Razer Gaming Mouse contains a Li-ion rechargeable battery. In general, the life expectancy of such batteries is dependent upon usage. If you suspect that the Li-ion rechargeable battery inside the Razer Gaming Mouse may be drained (has a low charge), try charging it. Caution: Don’t open, mutilate, or expose to conducting materials (metal), moisture, liquid, fire, or heat. Doing so may cause batteries to leak or explode, resulting in personal injury. Battery life varies with usage. FOR GAMERS. BY GAMERS. ™ 7 LEGALESE COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION ©2023 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, "For Gamers. By Gamers.", and "Powered by Razer Chroma" logo are trademarks or registered trademarks of Razer Inc. and/or affiliated companies in the United States or other countries. All other trademarks are the property of their respective owners. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Razer is under license. Windows and the Windows logo are trademarks of the Microsoft group of companies. Razer Inc. ("Razer") may have copyright, trademarks, trade secrets, patents, patent app…

Text truncated - open the document above for the full version.

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 13-Jun--2023 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: RWO Razer Inc. (“the applicant”) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0022386734 Name: Razer Inc. Address: 9 Pasteur, Suite 100, Irvine, California, United States Contact Person: Johnsen Tia Email: [email protected] Tel.: 760 579 0180 Sincerely, _ _______________ Johnsen Tia Senior Director, Regulatory & Compliance

Razer Inc. CERTIFICATIONS CONCERNING “COVERED” EQUIPMENT Date:2023-06-13 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 FCC ID: RWO-RZ010466 To Whom It May Concern: As required by section 2.911(d)(5)(i), [Razer Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. As required by section 2.911(d)(5)(ii), [Razer Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Thank you for your attention to this matter. Sincerely yours, Signature Printed Name: Johnsen Tia Company: Razer Inc. Job Title: Associate VP, Regulatory & Compliance Email: [email protected] Telephone: 760 579 0180

RF_160_05 Declaration of Authorisation Date of issue 02-01-2023 (Razer Inc.) Declaration of Authorization We Name: Razer Inc. Address: 9 Pasteur, Suite 100. City: Irvine Country: CA92618, USA Declare that: Name Representative of agent: Ms. Rose Liu (1) Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country China is authorized to apply for Certification of the following product(s): Product description: Gaming Mouse Type designation: RZ01-0466, RZ01-0466XXXX-XXXX(X can be 0-9 or A-Z) Trademark: RAZER, Validity/ expiry date:2024-06-13 on our behalf. Date: 2023-06-13 City: Irvine Name: Johnsen Tia (2) Function: Associate VP, Regulatory & Compliance Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 02-01-2022 RF_501, Issue 10 Company Name: Razer Inc. Address: 9 Pasteur, Suite 100 City: Irvine, California Country: United States To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: RWO-RZ010466 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: This document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor unfair advantage in the market. Date: 2023-06-13 Name and signature of applicant: Johnsen Tia Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period

Model Declaration Letter We, the undersigning company Company Name: Razer Inc. Address: 9 Pasteur, Suite 100, Irvine, CA92618, USA Hereby confirm that the following products: Product description: Gaming Mouse Type designation: RZ01-0466, RZ01-0466XXXX-XXXX(X can be 0-9 or A-Z) Trademark: RAZER That All versions of the Model RZ01-0466 and RZ01-0466XXXX-XXXX(X can be 0-9 or A-Z); are electrically equal except the following difference: It is the same as the basic model and X is used to define which country it is for under the same family series. Date: 2023-06-13 Name: Johnsen Tia Job Title: Associate VP, Regulatory & Compliance Telephone: 760 579 0180 E-mail: [email protected] Signature:

Report No.: 2304TWE920-UE Product: Gaming Mouse Brand Name: RAZER Model Number: RZ01-0466 1 of 8 External Photograph (1) EUT Photo (2) EUT Photo Report No.: 2304TWE920-UE 2 of 8 (3) EUT Photo (4) EUT Photo Report No.: 2304TWE920-UE 3 of 8 (5) EUT Photo (6) EUT Photo Report No.: 2304TWE920-UE 4 of 8 (7) EUT Photo (8) EUT Photo Report No.: 2304TWE920-UE 5 of 8 (9) EUT Photo (10) EUT Photo Report No.: 2304TWE920-UE 6 of 8 (11) EUT Photo (12) EUT Photo Report No.: 2304TWE920-UE 7 of 8 (13) EUT Photo (14) EUT Photo Report No.: 2304TWE920-UE 8 of 8 (15) EUT Photo (Brand:RAZER,M/N: RZ01-0466 ) (16) EUT Photo

Report No.: 2304TWE920-UI Product: Gaming Mouse Brand Name: RAZER Model Number: RZ01-0466 1 of 8 Internal Photograph (1) EUT Photo (2) EUT Photo (3) EUT Photo Report No.: 2304TWE920-UI 2 of 8 (4) EUT Photo Report No.: 2304TWE920-UI 3 of 8 (5) EUT Photo (6) EUT Photo Report No.: 2304TWE920-UI 4 of 8 (7) EUT Photo (8) EUT Photo Report No.: 2304TWE920-UI 5 of 8 (9) EUT Photo (10) EUT Photo Report No.: 2304TWE920-UI 6 of 8 (11) EUT Photo (12) EUT Photo Report No.: 2304TWE920-UI 7 of 8 (13) EUT Photo (14) EUT Photo Report No.: 2304TWE920-UI 8 of 8 (15) EUT Photo

Report No.: BTL-FCC SAR-1-2302C057C FCC SAR Test Report FCC ID : RWO-RZ010466 Report No. : BTL-FCC SAR-1-2302C057C Equipment : Gaming Mouse Model Name : RZ01-0466 Brand Name : RAZER Applicant : Razer Inc. Address : 9 Pasteur, Suite 100, Irvine, CA92618, USA Radio Function : Bluetooth, 2.4G SRD Standard(s) : KDB447498 D04 Interim General RF Exposure Guidance v01 KDB248227 D01 802.11 Wi-Fi SAR v02r02 KDB865664 D01 SAR measurement 100 MHz to 6 GHz v01r04 KDB865664 D02 SAR Reporting v01r02 FCC §2.1093 Radiofrequency radiation exposure evaluation: portable devices IEEE C95.1:2019 Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz – 300 GHz. IEC/IEEE 62209-1528:2020 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1528: Human models, instrumentation, and procedures(Frequency range of 4 MHz to 10 GHz) Date of Receipt : Apr. 18, 2023 Date of Test : May. 10, 2023 Issued Date : May. 11, 2023 The above equipment has been tested and found in compliance with the requirement of the above standards by BTL Inc. Prepared by : Jerry Chuang, Supervisor Approved by : Peter Chen, Assistant Manager BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan Tel: +886-2-2657-3299 Fax: +886-2-2657-3331 Web: www.newbtl.com Project No.: 2302C057C Page 1 of 32 Report Version: R00 Report No.: BTL-FCC SAR-1-2302C057C Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Project No.: 2302C057C Page 2 of 32 Report Version: R00 Report No.: BTL-FCC SAR-1-2302C057C Table of Contents Page 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF EUT 5 2. RF EMISSIONS MEASUREMENT 6 2.1 TEST FACILITY 6 2.2 MEASUREMENT UNCERTAINTY 7 2.3. WLAN ANTENNA INFORMATION 8 2.4. THE MAXIMUM SAR-1G VALUES 9 2.5. LABORATORY ENVIRONMENT 9 2.6. MAIN TEST INSTRUMENTS 10 3. SAR MEASUREMENTS SYSTEM CONFIGURATION 11 3.1. SAR MEASUREMENT SETUP 11 3.1.1. TEST SETUP LAYOUT 11 3.2. DASY5 E-FIELD PROBE SYSTEM 12 3.2.1. EX3DV4 PROBE SPECIFICATION 12 3.2.2. E-FIELD PROBE CALIBRATION 13 3.2.3. OTHER TEST EQUIPMENT 14 3.2.4. SCANNING PROCEDURE 15 3.2.5. DATA STORAGE AND EVALUATION 16 3.2.6. DATA EVALUATION BY SEMCAD 17 4. TISSUE-EQUIVALENT LIQUID 19 4.1. TISSUE-EQUIVALENT LIQUID INGREDIENTS 19 4.2. TISSUE-EQUIVALENT LIQUID PROPERTIES 20 5. SYSTEM CHECK 21 5.1. DESCRIPTION OF SYSTEM CHECK 21 5.2. DESCRIPTION OF SYSTEM CHECK 22 6. OPERATIONAL CONDITIONS DURING TEST 23 6.1. GENERAL DESCRIPTION OF TEST PROCEDURES 23 6.2. TEST POSITION ANTENNA LOCATION 23 6.3. BODY TEST CONFIGURATION 24 7. SAR MEASUREMENT VARIABILITY AND UNCERTAINTY 25 7.1. SAR MEASUREMENT VARIABILITY 25 7.2. TEST CONFIGURATION 26 8. CONDUCTED POWER RESULTS 27 8.1. CONDUCTED POWER MEASUREMENT RESULTS OF BLUETOOTH & 2.4G SRD 27 8.2. SAR TEST RESULTS 28 9. SAR TEST RESULTS 29 9.1. BODY SAR TEST RESULTS 29 10. SIMULTANEOUS TRANSMISSION CONDITIONS 30 11. TEST LAYOUT 31 Project No.: 2302C057C Page 3 of 32 Report Version: R00 Report No.: BTL-FCC SAR-1-2302C057C REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. 2023/5/11 Project No.: 2302C057C Page 4 of 32 Report Version: R00 Report No.: BTL-FCC SAR-1-2302C057C 1. GENERAL INFORMATION 1.1. General Description Of EUT Equipment Gaming Mouse Brand Name RAZER Model Name RZ01-0466 Series Model RZ01-0466XXXX-XXXX(X can be 0-9 or A-Z) Model Difference(s) The system’s model name is RZ01-0466XXXX-XXXX (X: Can be 0-9, A-Z), andthe system contains a Gaming Mouse (Model name:RZ01-0466) and USB Dongle(Model name: DGRFG7). HW Version v1.0 SW Version v1.00.00 Operation Frequency Band Frequency (MHz) Bluetooth Low Energy TX : 2400 - 2483.5 2.4G SRD TX : 2400 - 2483.5 Test Model RZ01-0466 Sample Status Engineering Sample EUT Modification(s) N/A The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO/IEC 17025 quality assessment standard and technical standard(s).…

Text truncated - open the document above for the full version.

Test Laboratory: BTL Date: 2023/5/10 System Check_H2450 Frequency: 2450 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.0°C; Liquid Temperature: 22.0°C Medium parameters used (interpolated): f = 2450 MHz; σ = 1.856 S/m; ε r = 40.744; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn393; Calibrated: 2023/4/13 - Probe: EX3DV4 - SN7350; ConvF(7.71, 7.71, 7.71) @ 2450 MHz; Calibrated: 2022/12/13 - Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: Twin-SAM V5.0 (30deg probe tilt); Type: QD 000 P40 CD; Serial: 1897 System Performance Check at Frequencies above 1 GHz/Pin=250mW /Area Scan (9x9x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 22.1 W/kg System Performance Check at Frequencies above 1 GHz/Pin=250mW /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 113.3 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 28.9 W/kg SAR(1 g) = 13.5 W/kg; SAR(10 g) = 6.13 W/kg Smallest distance from peaks to all points 3 dB below = 9.5 mm Ratio of SAR at M2 to SAR at M1 = 46.1% Maximum value of SAR (measured) = 23.1 W/kg 0 dB = 22.1 W/kg = 13.45 dBW/kg

Test Laboratory: BTL Date: 2023/5/10 BLE_2M Frequency: 2402 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.0°C; Liquid Temperature: 22.0°C Medium parameters used (interpolated): f = 2402 MHz; σ = 1.818 S/m; ε r = 40.794; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn393; Calibrated: 2023/4/13 - Probe: EX3DV4 - SN7350; ConvF(7.71, 7.71, 7.71) @ 2402 MHz; Calibrated: 2022/12/13 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: Twin-SAM V5.0 (30deg probe tilt); Type: QD 000 P40 CD; Serial: 1897 Gaming Mouse/Rear Face_0cm/BLE_2M Ch0/Area Scan (8x13x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.0283 W/kg Gaming Mouse/Rear Face_0cm/BLE_2M Ch0/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.425 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 0.0400 W/kg SAR(1 g) = 0.020 W/kg; SAR(10 g) = 0.011 W/kg Smallest distance from peaks to all points 3 dB below: Larger than measurement grid (> 15 mm) Ratio of SAR at M2 to SAR at M1 = 52.2% Maximum value of SAR (measured) = 0.0316 W/kg Test Laboratory: BTL Date: 2023/5/10 2.4G_SRD Frequency: 2480 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 23.0°C; Liquid Temperature: 22.0°C Medium parameters used (interpolated): f = 2480 MHz; σ = 1.879 S/m; ε r = 40.683; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn393; Calibrated: 2023/4/13 - Probe: EX3DV4 - SN7350; ConvF(7.71, 7.71, 7.71) @ 2480 MHz; Calibrated: 2022/12/13 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: Twin-SAM V5.0 (30deg probe tilt); Type: QD 000 P40 CD; Serial: 1897 Gaming Mouse/Rear Face_0cm/2.4G SRD Ch78/Area Scan (8x13x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.0236 W/kg Gaming Mouse/Rear Face_0cm/2.4G SRD Ch78/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.083 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.0380 W/kg SAR(1 g) = 0.016 W/kg; SAR(10 g) = 0.00617 W/kg Smallest distance from peaks to all points 3 dB below: Larger than measurement grid (> 15 mm) Ratio of SAR at M2 to SAR at M1 = 40.7% Maximum value of SAR (measured) = 0.0273 W/kg

Asset No.： E-537 Model No.： D2450V2 Serial No.： 973 Environmental 22.9°C, 52 % Original Cal. Date： February 8, 2021 Next Cal. Date： February 7, 2024 1IEEE Std 1528-2013 2IEC 62209-2 3KDB865664 Equipment：Manufacturer：Model No.：Serial No.：Cal.Organization：Cal. Date： Power AmplifierEMCIEMC053035980869N/A N/A Power MeterAnritsuMA2487A6K00004714N/AAugust 15, 2021 Power SensorAnritsuMA2491A34138N/AAugust 15, 2021 Directional CouplerWokenTS-PCC0M-05107090019N/AN/A Signal GeneratorR & SSMB100A113244N/AAugust 2, 2021 ENA Network AnalyzerAgilentE5071CMY46524658N/AMarch 22, 2021 Model No ItemOriginal Cal. ResultVerified on 2022/1/18DeviationResult Impedance, transformed to feed 54.1Ω+1.9jΩ49.2Ω+4.2jΩ<5ΩPass Return Loss(dB)-27.2-28.379-4.3%Pass SAR Value for 1g(mW/g) 13.414.15.2%Pass SAR Value for 10g(mW/g) 6.186.55.2%Pass D2450V2 Dipole Internal Calibration Record For Head Tissue Impedance Test-HeadReturn Loss-Head Standard List IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorpiton Rate(SAR) in the Human Head from Wireless Communication Devices: Measurement Texhniques, June 2013 Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body(frequency range of 30 MHz to 6 GHz), SAR Measurement Requirements for 100 MHz to 6 GHz Equipment Information Calibrator:Approver: Validation Report for Head TSL Asset No.： E-537 Model No.： D2450MHzV2 Serial No.： 973 Environmental 24.3°C, 57 % Original Cal. Date： February 8, 2021 Next Cal. Date： February 7, 2024 1IEEE Std 1528-2013 2IEC 62209-2 3KDB865664 Equipment：Manufacturer： Model No.：Serial No.：Cal.Organization：Cal. Date： Power AmplifierEMCI EMC053035980869N/A N/A Power MeterAnritsu MA2495A1128008N/A June 1, 2022 Power SensorAnritsu MA2411B1126001N/A June 1, 2022 Directional CouplerWoken TS-PCC0M-05107090019N/A N/A Signal GeneratorR & S SMB100A113244N/A July 29, 2022 ENA Network AnalyzerAgilent E5071CMY46524658N/A March 21, 2022 Model No ItemOriginal Cal. ResultVerified on 2023/01/03DeviationResult Impedance, transformed to feed point 54.1Ω+1.9jΩ51.4Ω+2.3jΩ<5ΩPass Return Loss(dB)-27.2-27.10.4%Pass SAR Value for 1g(mW/g)13.414.04.5%Pass SAR Value for 10g(mW/g) 6.186.606.8%Pass D2450V2 Dipole Internal Calibration Record For Head Tissue Impedance Test-HeadReturn Loss-Head Standard List IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorpiton Rate(SAR) in the Human Head from Wireless Communication Devices: Measurement Texhniques, June 2013 Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body(frequency range of 30 MHz to 6 GHz), March 2010 SAR Measurement Requirements for 100 MHz to 6 GHz Equipment Information Calibrator:Approver: Validation Report for Head TSL

MRT Technology (Taiwan) Co., Ltd Report No.: 2303TWE917-U1 Phone: +886-3-3288388 Report Version: 1.0 Fax: +886-3-3288918 Issue Date: 2023-04-17 Web: www.mrt-cert.com Page Number: 1 of 66 FCC ID : RWO-RZ010466 APPLICANT : Razer Inc. Product : Gaming Mouse Model No. : RZ01-0466 Series Model No. : RZ01-0466XXXX-XXXX(X can be 0-9 or A-Z) Brand Name : RAZER Trademark : RAZER , FCC Classification : (DTS) Digital Transmission System FCC Rule Part(s) : Part 15.247 Test Procedure(s) : ANSI C63.10-2013 Received Date : March 28 ,2023 Test Date : March 28 ~ April 7,2023 MEASUREMENT REPORT Tested By : ( Peter Syu ) Reviewed By : ( Paddy Chen ) Approved By : ( Chenz Ker) The test results only relate to the tested sample. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Taiwan) Co., Ltd. Report No.: 2303TWE917-U1 Page Number: 2 of 66 Revision History Report No. Version Description Issue Date Note 2303TWE917-U1 1.0 Original Report 2023-04-17 Report No.: 2303TWE917-U1 Page Number: 3 of 66 CONTENTS Description Page §2.1033 General Information ......................................................................................................... 5 1. INTRODUCTION ..................................................................................................................... 6 1.1. Scope .................................................................................................................................... 6 1.2. MRT Test Location ................................................................................................................ 6 2. PRODUCT INFORMATION ..................................................................................................... 7 2.1. Equipment Description .......................................................................................................... 7 2.2. Product Specification Subjective to this Standard .................................................................. 8 2.3. Test Mode ............................................................................................................................. 8 2.4. Operation Frequency / Channel List ...................................................................................... 9 2.5. Test Configuration ............................................................................................................... 10 2.6. Test Software ...................................................................................................................... 10 2.7. EMI Suppression Device(s)/Modifications ........................................................................... 10 2.8. Labeling Requirements ....................................................................................................... 10 3. DESCRIPTION of TEST ......................................................................................................... 11 3.1. Evaluation Procedure .......................................................................................................... 11 3.2. AC Line Conducted Emissions ............................................................................................ 11 3.3. Radiated Emissions ............................................................................................................ 12 4. ANTENNA REQUIREMENTS ................................................................................................ 13 5. TEST EQUIPMENT CALIBRATION DATE ............................................................................ 14 6. MEASUREMENT UNCERTAINTY ......................................................................................... 15 7. TEST RESULT ...................................................................................................................... 16 7.1. Summary ............................................................................................................................. 16 7.2. 6dB Bandwidth Measurement ............................................................................................. 17 7.2.1. Test Limit ......................................................................................................................... 17 7.2.2. Test Procedure used ............................................................…

Text truncated - open the document above for the full version.