RWO-RZ010487Gaming Mouse

FOR GAMERS. BY GAMERS. ™ 0 . RAZER GAMING MOUSE MODEL NO: RZ01-0487 USER MANUAL 31-MAR-2023 FOR GAMERS. BY GAMERS. ™ 1 WHAT'S INSIDE  Razer RZ01-0487 A. Left mouse button B. Right mouse button C. Scroll wheel D. DPI cycle button* E. Razer Hypershift trigger F. Mouse button 5 G. Mouse button 4 H. Wireless USB dongle I. PTFE mouse feet J. Optical sensor K. Slider switch  Bluetooth mode  Power off mode  Razer™ HyperSpeed Wireless (2.4 GHz) mode *The DPI stages are 400, 800, 1600 (default), 3200, and 6400, and they can be customized using Razer Synapse.  1 x AA battery  Important Product Information Guide FOR GAMERS. BY GAMERS. ™ 2 WHAT'S NEEDED LET'S GET YOU COVERED Your product’s serial number can be found here. Register your product and score exclusive benefits razerid.razer.com/warranty 1 x AND Windows® 10 64-bit (or higher) USB Type A OR FOR GAMERS. BY GAMERS. ™ 3 SETTING UP YOUR RAZER RZ01-0487 INSERTING A BATTERY Caution: The included AA battery is non-rechargeable. Dispose of batteries in accordance with your local environmental laws. For your safety, use only lithium or alkaline batteries. CONNECTING YOUR MOUSE A. VIA RAZER™ HYPERSPEED WIRELESS (2.4 GHz) MODE 1. FOR GAMERS. BY GAMERS. ™ 4 2. 3. HYPERSPEED WIRELESS MODE (Connected - Solid green) USB Type A FOR GAMERS. BY GAMERS. ™ 5 B. VIA BLUETOOTH MODE 1. 2. PRESS AND HOLD 3s BLUETOOTH MODE (Pairing – Blinking blue) FOR GAMERS. BY GAMERS. ™ 6 3. Once paired, your Razer RZ01-0487 will automatically reconnect to your device whenever in Bluetooth mode and within range. Keep your devices close to each other for a faster and more stable connection. Razer RZ01-0487 BLUETOOTH MODE (Paired – Solid blue) FOR GAMERS. BY GAMERS. ™ 7 RAZER HYPERSHIFT TRIGGER When held down, the Razer HyperShift trigger temporarily allows you to change the mouse's sensitivity or use the Razer Hypershift functions available on the mouse. You can change your mouse's DPI to match your playstyle or re-configure the buttons and functions of your mouse using Razer Synapse. Install Razer Synapse when prompted, or download the installer from razer.com/synapse Find out more about your dual-mode wireless gaming mouse at support.razer.com Primary functions Razer Hypershift functions Scroll click Print screen Scroll up Scroll left Scroll down Scroll right DPI cycle button Mute or unmute audio Mouse button 4 Minimize all windows Mouse button 5 FOR GAMERS. BY GAMERS. ™ 8 SAFETY AND MAINTENANCE SAFETY GUIDELINES To achieve maximum safety while using your Razer RZ01-0487, we suggest that you adopt the following guidelines: Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for support. Do not take apart the device, and do not attempt to operate it under abnormal current loads. Doing so will void your warranty. Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug and/or switch off the device to stabilize the temperature to an optimal level. COMFORT Research has shown that long periods of repetitive motion, improper positioning of your computer peripherals, incorrect body position, and poor habits may be associated with physical discomfort and injury to nerves, tendons, and muscles. Below are some guidelines to avoid injury and ensure optimum comfort while using your Razer RZ01-0487.  Position your keyboard and monitor directly in front of you with your mouse next to it. Place your elbows next to your side, not too far away, and your keyboard within easy reach.  Adjust the height of your chair and table so that the keyboard and mouse are at or below elbow-height.  Keep your feet well supported, posture straight and your shoulders relaxed.  During gameplay, relax your wrist and keep it straight. If you do the same tasks with your hands repeatedly, try not to bend, extend or twist your hands for long periods.  Do not rest your wrists on hard surfaces for long periods. Use a wrist rest to support your wrist while gaming.  Do not sit in the same position all day. Get up, step away from your desk and do exercises to stretch your arms, shoulders, neck, and legs. If you experience any physical discomfort while using your mouse, such as pain, numbness, or tingling in your hands, wrists, elbows, shoulders, neck, or back, please consult a qualified medical doctor immediately. FOR GAMERS. BY GAMERS. ™ 9 MAINTENANCE AND USE The Razer RZ01-0487 requires minimum maintenance to keep it in optimum condition. Once a month, we recommend you clean the device using a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents. To get the ultimate experience in movement and control, we highly recommend a premium mouse mat from Razer. Some surfaces will cause undue wear on the feet requiring constant care and eventual replacement. Do note that the sensor of the Razer RZ01-0487 is 'tuned' or optimized, especially for the Razer mouse mats. This means that the sensor has been tested extensively to confirm that the Razer RZ01-0487 reads and tracks best on Razer mouse mats. FOR GAMERS. BY GAMERS. ™ 10 REGULATORY AND COMPLIANCE INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and…

Text truncated - open the document above for the full version.

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 20-Feb--2023 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: RWO Razer Inc. (“the applicant”) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0022386734 Name: Razer Inc. Address: 9 Pasteur, Suite 100, Irvine, California, United States Contact Person: Johnsen Tia Email: [email protected] Tel.: 760 579 0180 Sincerely, ________________ Johnsen Tia Senior Director, Regulatory & Compliance

RAZER INC. | 9 PASTEUR, SUITE 100, IRVINE, CA 92618 USA T: +1 (949) 655 8888 | F: +1 (949) 537 7500 | RAZER.COM Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-31-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: RWO-RZ010487 Razer Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Name: Johnsen Tia Signature: RAZER INC. | 9 PASTEUR, SUITE 100, IRVINE, CA 92618 USA T: +1 (949) 655 8888 | F: +1 (949) 537 7500 | RAZER.COM Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-31-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: RWO-RZ010487 Razer Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Name: Johnsen Tia Signature:

RAZER INC. | 9 PASTEUR, SUITE 100, IRVINE, CA 92618 USA T: +1 (949) 655 8888 | F: +1 (949) 537 7500 | RAZER.COM Declaration of Authorization We Name: Razer Inc. Address: 9 Pasteur, Suite 100 City: Irvine Country: United States Declare that: Name Representative of agent: Ms. Rose Liu (1) Agent Company name: BTL Inc. Address: No.3,Jinshagang 1st Road, Dalang Town City: Dong Guan Country China is authorized to apply for Certification of the following product(s): Product description: Gaming Mouse Type designation: RZ01-0487, RZ01-0487XXXX-XXXX(X can be 0-9 or A-Z) Trademark: RAZER Validity/ expiry date: 2024-03-31 on our behalf. Date: 2023-03-31 City: Irvine Name: Johnsen Tia (2) Function: Director, Regulatory & Compliance Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

RAZER INC. | 9 PASTEUR, SUITE 100, IRVINE, CA 92618 USA T: +1 (949) 655 8888 | F: +1 (949) 537 7500 | RAZER.COM Company Name: Razer Inc. Address: 9 Pasteur, Suite 100 City: Irvine Country: United States To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: RWO-RZ010487 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: This document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor unfair advantage in the market. Planned Release Date STC: 180 days from date of grant (notes 2, 3, 4, 5) Date: 2023-03-31 Name and signature of applicant: Johnsen Tia Director, Regulatory & Compliance FCC, Request for non-disclosure Date: 02-01-2023 RF_501, Issue 10 Page 1 of 1 Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period

RAZER INC. | 9 PASTEUR, SUITE 100, IRVINE, CA 92618 USA T: +1 (949) 655 8888 | F: +1 (949) 537 7500 | RAZER.COM Model Declaration Letter We, the undersigning company Company Name: Razer Inc. Address: 9 Pasteur, Suite 100, Irvine, CA92618, USA Hereby confirm that the following products: Product description: Gaming Mouse Type designation: RZ01-0487, RZ01-0487XXXX-XXXX(X can be 0-9 or A-Z) Trademark: RAZER That All versions of the Model RZ01-0487 and RZ01-0487XXXX-XXXX(X can be 0-9 or A-Z); are electrically equal except the following difference: It is the same as the basic model and X is used to define which country it is for under the same family series. Date: 2023-03-31 Name: Johnsen Tia Telephone: 760 579 0180 E-mail: [email protected] Signature:

Report No.: 2212TWE903-U1~U3 Product: Gaming Mouse Brand Name: RAZER Model Number: RZ01-0487 1 of 7 External Photograph (1) EUT Photo (2) EUT Photo Report No.: 2212TWE903-U1~U3 2 of 7 (3) EUT Photo (4) EUT Photo Report No.: 2212TWE903-U1~U3 3 of 7 (5) EUT Photo (6) EUT Photo Report No.: 2212TWE903-U1~U3 4 of 7 (7) EUT Photo (8) EUT Photo Report No.: 2212TWE903-U1~U3 5 of 7 (9) EUT Photo (10) EUT Photo Report No.: 2212TWE903-U1~U3 6 of 7 (11) EUT Photo (12) EUT Photo Report No.: 2212TWE903-U1~U3 7 of 7 (13) EUT Photo

22-DEC-2022 RZ01-0487 Product Marking Product Label Location of marking Product Label Made in China Made in Thailand Location of marking Product Label Location of marking

Report No.: 2212TWE903-U1~U3 Product: Gaming Mouse Brand Name: RAZER Model Number: RZ01-0487 1 of 4 Internal Photograph (1) EUT Photo (2) EUT Photo Report No.: 2212TWE903-U1~U3 2 of 4 (3) EUT Photo (4) EUT Photo Report No.: 2212TWE903-U1~U3 3 of 4 (5) EUT Photo (6) EUT Photo Report No.: 2212TWE903-U1~U3 4 of 4 (7) EUT Photo (8) EUT Photo

Test Laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Date: 2022/12/30 System Check-D2450V2_H2450 DUT: Dipole 2450 MHz D2450V2 SN:1014 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: f = 2450 MHz; σ = 1.827 S/m; ε r = 37.969; ρ = 1000 kg/m 3 DASY5 Configuration: -Probe: EX3DV4 -SN7506; ConvF(7.85, 7.85, 7.85) @ 2450 MHz; Calibrated: 2022/5/31 -Sensor-Surface: 1.4mm (Mechanical Surface Detection) -Electronics: DAE4 Sn1557; Calibrated: 2022/1/20 -Phantom: SAM 1; Type: QD 000 P40 CB; Serial: 1961 -Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Pin=250 mW/Area Scan (71x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 21.9 W/kg Pin=250 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 111.9 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 26.7 W/kg SAR(1 g) = 12.8 W/kg; SAR(10 g) = 5.96 W/kg Smallest distance from peaks to all points 3 dB below = 9 mm Ratio of SAR at M2 to SAR at M1 = 48.9% Maximum value of SAR (measured) = 21.1 W/kg

Test Laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Date: 2022/12/30 P01 BLE_1M_Ch39_Rear Face_0cm DUT: EUT Communication System: BT; Frequency: 2480 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: f = 2480 MHz; σ = 1.853 S/m; ε r = 37.919; ρ = 1000 kg/m 3 DASY5 Configuration: -Probe: EX3DV4 -SN7506; ConvF(7.85, 7.85, 7.85) @ 2480 MHz; Calibrated: 2022/5/31 -Sensor-Surface: 1.4mm (Mechanical Surface Detection) -Electronics: DAE4 Sn1557; Calibrated: 2022/1/20 -Phantom: SAM 1; Type: QD 000 P40 CB; Serial: 1961 -Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) -Area Scan (81x121x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.111 W/kg - Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.254 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.150 W/kg SAR(1 g) = 0.067 W/kg; SAR(10 g) = 0.032 W/kg Smallest distance from peaks to all points 3 dB below = 8 mm Ratio of SAR at M2 to SAR at M1 = 47% Maximum value of SAR (measured) = 0.115 W/kg Test Laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Date: 2022/12/30 P02 2.4G SRD_2M_Ch78_Rear Face_0cm DUT: EUT Communication System: SRD; Frequency: 2480 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: f = 2480 MHz; σ = 1.853 S/m; ε r = 37.919; ρ = 1000 kg/m 3 DASY5 Configuration: -Probe: EX3DV4 -SN7506; ConvF(7.85, 7.85, 7.85) @ 2480 MHz; Calibrated: 2022/5/31 -Sensor-Surface: 1.4mm (Mechanical Surface Detection) -Electronics: DAE4 Sn1557; Calibrated: 2022/1/20 -Phantom: SAM 1; Type: QD 000 P40 CB; Serial: 1961 -Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) -Area Scan (81x121x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.100 W/kg - Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.803 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 0.148 W/kg SAR(1 g) = 0.067 W/kg; SAR(10 g) = 0.033 W/kg Smallest distance from peaks to all points 3 dB below = 7.1 mm Ratio of SAR at M2 to SAR at M1 = 48.2% Maximum value of SAR (measured) = 0.114 W/kg

Justification for Extended SAR Dipole Calibrations Dipole Date of Measurement Return Loss (dB) Delta (%) Impedance (ohm) Delta (ohm) Head 2450MHz May 19, 2021 -28.3 -2.71 53.8 -4.17 May 17, 2022 -27.5 49.7 Note: The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification results meet the requirement of extended calibration.

Report No.: BTL-ANT-2209C112D R00 Page 1 of 14 ANT Test Report Antenna Type: Ceramic Antenna Report No.: BTL-ANT-2209C112D R00 Page 2 of 14 Project No. : 2209C112BD Product Type : Ceramic Antenna Brand Name : Razer Test Model : RZ01-0487 Date of Receipt : 2022-11-14 Date of Test : 2022-11-14 Issued Date : 2022-11-14 Report Version : R00 The delegate : Razer Standard(s) : Test Plan for Wireless Device Over-the-Air Performance v3.8.2 Applicant : Razer Inc. Address : 9 Pasteur, Suite 100, Irvine, CA92618, USA Manufacturer : Razer (Asia-Pacific) Pte.,Ltd. Address : 1 one-north Crescent, #02-01, Singapore 138538 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Approved by : BTL Inc. No. 3 Jinshagang 1st Rd. Shixia, Dalang Town Dongguan City, Guangdong 523792 People’s Republic of China. Tel: +86-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-ANT-2209C112D R00 Page 3 of 14 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-ANT-2209C112D R00 Page 4 of 14 Table of Contents REPORT ISSUED HISTORY ................................................................................................... 5 . PHYSICAL LAYOUT AND SITE DESCRIPTION .................................................................. 6 WIRELESS MOBILE DEVICE TEST LABORATORY .......................................................................................... 6 ANECHOIC CHAMBER ........................................................................................................................................ 6 MULTI AXIS POSITIONING SYSTEM (MAPS™) ................................................................................................ 6 QUIET ZONE ........................................................................................................................................................ 7 EMCO MODEL 3165-01 ABSORBER NESTED DUAL-POLARIZED DUAL-VIVALDI ARRAY ANTENNA ........ 7 EMCO-3102 CIRCULARLY POLARIZED COMMUNICATION ANTENNAS ....................................................... 7 TEST EQUIPMENT .............................................................................................................................................. 7 EMQUEST SOFTWARE ....................................................................................................................................... 7 TEMPERATURE, HUMIDITY .................................................................................................. 7 2.4G GAIN & PATTERN NO IRON ....................................................................................... 8 . TEST EQUIPMENT LIST ..................................................................................................... 12 TEST EQUIPMENT USED FOR MEASURING .................................................................................................. 12 . PHOTOGRAPH ................................................................................................................... 14 EUT SETUP PHOTO .......................................................................................................................................... 14 Report No.: BTL-ANT-2209C112D R00 Page 5 of 14 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-ANT-2209C112D R00 Original Report. 2022-11-14 - Report No.: BTL-ANT-2209C112D R00 Page 6 of 14 1. PHYSICAL LAYOUT AND SITE DESCRIPTION 1.1 WIRELESS MOBILE DEVICE TEST LABORATORY All tests were performed in BTL Inc. state-of-the-art Wireless Mobile Device Test Laboratory consisting of a rectangular anechoic chamber equipped with a multi-axis positioning system (MAPS), a dual polarized quad- ridge waveguide horn, and two EMCO-3102 circularly polarized communication antennas. A base station simulator is used to establish communication with the EUT and place it in the proper mode, and a spectrum analyzer and RF switch combination is used for measuring the signal from the EUT at each position and polarization. BTL Inc.’s EMQuest EMQ-100 Pattern Meas…

Text truncated - open the document above for the full version.

MRT Technology (Taiwan) Co., Ltd Report No.: 2212TWE903-U1 Phone: +886-3-3288388 Report Version: 1.0 Fax: +886-3-3288918 Issue Date: 2022-12-26 Web: www.mrt-cert.com FCC ID: RWO-RZ010487 Page Number: 1 of 62 FCC ID : RWO-RZ010487 APPLICANT : Razer Inc. Application Type : Certification Product : Gaming Mouse Model No. : RZ01-0487 Serial Model No. : RZ01-0487XXXX-XXXX(X can be 0-9 or A-Z) Brand Name : RAZER FCC Classification : (DTS) Digital Transmission System FCC Rule Part(s) : Part 15.247 Test Procedure(s) : ANSI C63.10-2013 Received Date : December 05, 2022 Test Date : December 13, 2022~ December 15, 2022 MEASUREMENT REPORT Tested By : ( Fran Chen ) Reviewed By : ( Paddy Chen ) Approved By : ( Chenz Ker) The test results only relate to the tested sample. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Taiwan) Co., Ltd. Report No.: 2212TWE903-U1 FCC ID: RWO-RZ010487 Page Number: 2 of 62 Revision History Report No. Version Description Issue Date Note 2212TWE903-U1 1.0 Original Report 2022-12-26 Report No.: 2212TWE903-U1 FCC ID: RWO-RZ010487 Page Number: 3 of 62 CONTENTS Description Page §2.1033 General Information ......................................................................................................... 5 1. INTRODUCTION ..................................................................................................................... 6 1.1. Scope .................................................................................................................................... 6 1.2. MRT Test Location ................................................................................................................ 6 2. PRODUCT INFORMATION ..................................................................................................... 7 2.1. Equipment Description .......................................................................................................... 7 2.2. Product Specification Subjective to this Standard .................................................................. 7 2.3. Test Mode ............................................................................................................................. 7 2.4. Operation Frequency / Channel List ...................................................................................... 8 2.5. Test Configuration ................................................................................................................. 9 2.6. Test Software ........................................................................................................................ 9 2.7. EMI Suppression Device(s)/Modifications ............................................................................. 9 2.8. Labeling Requirements ......................................................................................................... 9 3. DESCRIPTION of TEST ........................................................................................................ 10 3.1. Evaluation Procedure .......................................................................................................... 10 3.2. AC Line Conducted Emissions ............................................................................................ 10 3.3. Radiated Emissions ............................................................................................................ 11 4. ANTENNA REQUIREMENTS ................................................................................................ 12 5. TEST EQUIPMENT CALIBRATION DATE ............................................................................ 13 6. MEASUREMENT UNCERTAINTY ......................................................................................... 14 7. TEST RESULT ...................................................................................................................... 15 7.1. Summary ............................................................................................................................. 15 7.2. 6dB Bandwidth Measurement ............................................................................................. 16 7.2.1. Test Limit ......................................................................................................................... 16 7.2.2. Test Procedure used ....................................................................................................... 16 7.2.3. Test Setting ..................................................................................................................... 16 7.2.4. Test Setup ....................................................................................................................... 16 7.2.5. Test Result ...................................................................................................................... 17 7.3. Output Power Measurement ................................................................................................ 19 7.3.1. Test Limit ......................................................................................................................... 19 7.3.2. Test Procedure Used ....................................................................................................... 19 7.3.3. Test Setting ..................................................................................................................... 19 7.3.4. Test Setup ....................................................................................................................... 19 7.3.5. Test Result of Output Power ..........................................................................…

Text truncated - open the document above for the full version.

MRT Technology (Taiwan) Co., Ltd Report No.: 2212TWE903-U2 Phone: +886-3-3288388 Report Version: 1.0 Fax: +886-3-3288918 Issue Date: 2022-12-26 Web: www.mrt-cert.com FCC ID: RWO-RZ010487 Page Number: 1 of 49 FCC ID : RWO-RZ010487 APPLICANT : Razer Inc. Application Type : Certification Product : Gaming Mouse Model No. : RZ01-0487 Serial Model No. : RZ01-0487XXXX-XXXX(X can be 0-9 or A-Z) Brand Name : RAZER FCC Classification : (DTS) Digital Transmission System FCC Rule Part(s) : Part 15.247 Test Procedure(s) : ANSI C63.10-2013 Received Date : December 05, 2022 Test Date : December 13, 2022~ December 15, 2022 MEASUREMENT REPORT Tested By : ( Fran Chen ) Reviewed By : ( Paddy Chen ) Approved By : ( Chenz Ker) The test results only relate to the tested sample. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Taiwan) Co., Ltd. Report No.: 2212TWE903-U2 FCC ID: RWO-RZ010487 Page Number: 2 of 49 Revision History Report No. Version Description Issue Date Note 2212TWE903-U2 1.0 Origin…

Text truncated - open the document above for the full version.