RWO-RZ430424Lighting Module

. RAZER LIGHTING MODULE MODEL NO: RZ43-042401 IMPORTANT PRODUCT INFORMATION GUIDE FOR GAMERS. BY GAMERS. ™ 1 WHAT’S INSIDE / WHAT’S NEEDED WHAT’S INSIDE  Razer RZ43-042401 A. Extender port B. Light strip cutting areas C. 2 m light strip D. Power port E. Cable tie F. Multi-function button G. Status indicator  Power adapter with interchangeable plugs*  Important Product Information Guide *May vary for specific regions. FOR GAMERS. BY GAMERS. ™ 2 WHAT’S NEEDED PRODUCT REQUIREMENTS  2.4 GHz WiFi network (WPA / WPA2 encryption)  WiFi-enabled PC / Laptop (Windows® 10 64-bit or higher) or iOS / Android device** RAZER SMART HOME APP REQUIREMENTS  iOS 13 / Android 9 Pie (or higher) device with Bluetooth connectivity**  Internet connection for app installation RAZER SYNAPSE REQUIREMENTS  Windows® 10 64-bit (or higher)  Internet connection for software installation **Bluetooth connectivity required for initial setup only. LET’S GET YOU COVERED You’ve got a great device in your hands, complete with a 1-year limited warranty coverage. Now maximize its potential and score exclusive Razer benefits by registering at razerid.razer.com Got a question? Ask the Razer Support Team at support.razer.com Your product’s serial number can be found here. FOR GAMERS. BY GAMERS. ™ 3 GETTING STARTED SETTING IT UP 1. Use the adhesive layer on the light strip to fasten it on a clean, dry, and flat surface. (OPTIONAL) You can shorten the light strip by trimming on any of its designated cutting areas. WARNING: Ensure the smart light strip is OFF before cutting the light strip to avoid electric shocks and only cut on its designated cutting areas. Once trimmed, the smart light strip’s warranty will be void, and you will no longer be able to lengthen your setup. 2. With the appropriate AC plug for your region attached to the power adapter, connect it to the smart light strip’s power port and plug it into a power outlet. 3. Strap the cables as needed using the cable tie to organize your setup. FOR GAMERS. BY GAMERS. ™ 4 CUSTOMIZING THE LIGHTING A. VIA MOBILE DEVICE USING THE RAZER SMART HOME APP (REQUIRED) 1. Download the Razer Smart Home app on your mobile device. 2. Press the multi-function button to power on the smart light strip. The status indicator will blink in blue to show that the smart light strip is in pairing mode. 3. Launch the app and follow the onscreen instructions. The status indicator will turn solid green to show that the smart light strip is connected to the app. When prompted to select a WiFi network, select the same network used by your mobile device. Your mobile device must be connected to the same network whenever customizing the smart light strip You can now customize the Razer RZ43-042401 using the Razer Smart Home app. Razer Smart Home FOR GAMERS. BY GAMERS. ™ 5 B. VIA PC / LAPTOP USING THE RAZER SYNAPSE APP Before proceeding, make sure you've already set up the smart light strip on your network from the Razer Smart Home app, and your PC is connected to the same network as the smart light strip. 1. Go to razer.com/synapse to download and launch Razer Synapse. For existing users, make sure to update Razer Synapse to its latest version. Registering for a Razer ID account is recommended but optional. You may continue as a guest; however, you won’t be able to store any of your settings on the cloud. 2. Press the multi-function button to power on the smart light strip. The status indicator will show green to indicate that the smart light strip is connected to your network. 3. On Razer Synapse, click on Add Smart Home Device, and follow the onscreen instructions. 4. Update when prompted, and wait for Razer Synapse to set up the smart light strip. The Razer Synapse Dashboard will show the Razer RZ43-042401 on the Devices list. You can now customize the Razer RZ43-042401 using Razer Synapse. FOR GAMERS. BY GAMERS. ™ 6 REACTIVATING PAIRING MODE Pairing mode is required when setting up the smart light strip from the Razer Smart Home app. While unpaired, the smart light strip will always enter pairing mode when you power it on. If the smart light strip is left unpaired for 5 minutes, pairing mode will deactivate and its status indicator will turn yellow. To reactivate pairing mode, power off and on the smart light strip. FOR GAMERS. BY GAMERS. ™ 7 USING THE SMART LIGHT STRIP POWER ON/OFF Press the multi-function button to power on or power off the smart light strip. CHANGING THE LIGHTING EFFECT While powered on, press and hold the multi-function button to cycle through colors and release to set the current color as the active color. This function is only available when the Razer Smart Home app controls the smart light strip. PAIRING WITH A NEW DEVICE Once connected, a reset is required to connect the smart light strip to a new device. 1. Switch off the power supply of the smart light strip. 2. While holding the multi-function button, switch on the power supply and continue holding the multi-function button for four (4) more seconds. The light strip will briefly cycle through red, green, blue before displaying white when the reset is successful. The status indicator will also blink in blue to show that the smart light strip is in pairing mode. 3. Use the Razer Smart Home app to connect the Razer RZ43-042401 to a new mobile device. FOR GAMERS. BY GAMERS. ™ 8 SAFETY AND MAINTENANCE SAFETY GUIDELINES In order to achieve maximum safety while using the Razer RZ43-042401, we suggest that you adopt the following guidelines:  Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for support. Don't attempt to service or fix the device yourself at any time.  Don't take apart the device and attempt to operate it under abnormal current loads. Doing so may void your warranty.  Once you cut the light strip, the device's warranty will be void, and you can no longer extend your setup.  Only use accessorie…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Razer Inc. Address 9 Pasteur, Suite 100, Irvine, California, 92618, United States Grantee Code RWO FCC ID RWO-RZ430424 Authorized Contact Name Johnsen Tia Contact Email [email protected] Contact Phone 760 579 0180 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Razer Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Razer Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 05/17/2023 Print Name: Johnsen Tia Title: Director, Regulatory & Compliance *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 05/17/2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Razer Inc. Company Name: Razer Inc. Grantee Code: RWO FRN: 0022386734 Contact Name: Johnsen Tia Contact Name: Johnsen Tia Address: 9 Pasteur, Suite 100, Address: 9 Pasteur, Suite 100, City/Province/Zip: Irvine, California, 92618, United States City/Province/Zip: Irvine, California, 92618, United States Telephone: 760 579 0180 Telephone: 760 579 0180 Fax: 760 579 0182 Fax: 760 579 0182 Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: RWO-RZ430424 ATTN: Director of Certification: We, < Razer Inc. > understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < Razer Inc. > acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Johnsen Tia Name (Printed): Johnsen Tia Title: Director, Regulatory & Compliance Title: Director, Regulatory & Compliance Signature: Signature:

RAZER INC. | 9 PASTEUR, SUITE 100, IRVINE, CA 92618 USA T: +1 (949) 655 8888 | F: +1 (949) 537 7500 | RAZER.COM | STOCK CODE: 1337.HK We, Razer Inc.declare that this EUT (FCC ID: RWO-RZ430424, IC: 8092D-RZ430424) doesn’t have ad Hoc Mode function on “US/Canada frequencies“. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US/ Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, Please have my best attention. Sincerely yours, Print Name: Johnsen Tia Title: Director, Regulatory & Compliance Signature: On behalf of Company: Razer Inc. Telephone: 760 579 0180 E-mail: [email protected]

RAZER INC. | 9 PASTEUR, SUITE 100, IRVINE, CA 92618 USA T: +1 (949) 655 8888 | F: +1 (949) 537 7500 | RAZER.COM | STOCK CODE: 1337.HK Date: 11/4/2021 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: RWO-RZ430424 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Razer Inc. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Johnsen Tia Title: Director, Regulatory & Compliance Signature: On behalf of Company: Razer Inc. Telephone: 760 579 0180 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.0 Page: 1 of 7 Appendix External Photos for GZCR2112021519AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 7 EMC-ARF-02 Rev 1.0 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 3 of 7 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 4 of 7 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 5 of 7 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 6 of 7 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 7 of 7 EMC-ARF-02 Rev 1.0

8-MAR-2022 RZ43-042401 Product Marking Product Label For USA/Canada/Japan Label Location

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.0 Page: 1 of 6 Appendix Internal Photos for GZCR2112021519AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 6 EMC-ARF-03 Rev 1.0 EUT Constructional Details (EUT Photos) Antenna SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 3 of 6 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 4 of 6 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 5 of 6 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 6 of 6 EMC-ARF-03 Rev 1.0

EMC-TRF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR211202151903 Page: 1 of 12 FCC ID: RWO-RZ430424 Ricky Liu Manager 1 Cover Page RF Exposure Report Application No.: GZCR2112021519AT Applicant: Razer Inc. Address of Applicant: 9 Pasteur, Suite 100, Irvine, California 92618, United States Manufacturer: Razer (Asia-Pacific) Pte Ltd Address of Manufacturer: Razer SEA HQ, 1 one-north Crescent, #02-01, Singapore 138538 Factory: Guangdong BYD Energy-saving Technology Co., Ltd. Address of Factory: E7 building, BYD(huizhou) industrial zone Phase II, Xiangshui River, Daya Bay, Huizhou City, Guangdong Province, 516083, China Equipment Under Test (EUT): EUT Name: Lighting Module Model No.: RZ43-042401, RZ43-042401XX-XXXX (X can be 0-9 or A-Z) ♣ ♣ ♣♣ ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: RAZER Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2021-12-03 Date of Test: 2021-12-03 to 2021-12-10 Date of Issue: 2023-08-16 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. EMC-TRF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR211202151903 Page: 2 of 12 Revision Record Version Chapter Date Modifier Remark 01 2023-08-16 Original Authorized for issue by: Curry Wu/Project Engineer Ricky Liu/Reviewer EMC-TRF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR211202151903 Page: 3 of 12 2 Contents Page 1 COVER PAGE .............................................................................................................................. 1 2 CONTENTS .................................................................................................................................. 3 3 GENERAL INFORMATION ........................................................................................................... 4 3.1 GENERAL DESCRIPTION OF E.U.T. ............................................................................................ 4 3.2 DETAILS OF E.U.T. .................................................................................................................. 4 3.3 SEPARATION DISTANCE............................................................................................................ 6 3.4 TEST LOCATION ...................................................................................................................... 7 3.5 TEST FACILITY ........................................................................................................................ 7 4 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS ........................................................ 8 4.1 BLANKET 1 MW BLANKET EXEMPTION........................................................................................ 8 4.2 MPE-BASED EXEMPTION.......................................................................................................... 8 4.3 SAR-BASED EXEMPTION .......................................................................................................... 9 5 MEASUREMENT AND CALCULATION ...................................................................................... 12 5.1 MAXIMUM TRANSMIT POWER ................................................................................................... 12 5.2 RF EXPOSURE CALCULATION ................................................................................................. 12 EMC-TRF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR211202151903 Page: 4 of 12 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power Supply: AC Adapter: Model: A654-1304000I Input: 100-240V 50/60Hz 1.5A Output: 13V 4.0A 52W Cable(s): Adapter: DC cable 144cm unshielded non-core Controller: DC cable 28cm unshielded non-core Control line 148cm shielded with-core For BLE: Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V4.2 LE Modulation Type: GFSK Data Rate: 1M/bit Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: FPC Antenna Antenna Gain: 2.21dBi For 2.4G: Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz;802.11n(HT40): 2422MHz to 2452MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK);802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Number of Channels: 802.11b/g/n(HT20):11;802.11n(HT40):7 Channel Spacing: 5MHz Antenna Type: FPC Antenna Antenna Gain: 2.21dBi EMC-TRF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR211202151903 Page: 5 of 12 Declaration of EUT Family Grouping Model No:. RZ43-042401, RZ43-042401XX-XXXX (X can be 0-9 or A-Z) Only the model RZ43-042401 was tested since according to the declaration from the applicant, the electrical circuit design, PCB layout, component used and internal wiring and function were identical for the above models, with only difference on the Model No. Details as below. RZ43-042401 consist of a LED driver, controller box and a 2 m LED strip (model no.: RC30- 042400), can be interconnected to 10m using 1 m LED strip (model no.: RC30-042401). 1 m LED strip (model no.: RC30-042401) will be sold separately without LED driver and controller box. EMC-TRF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR211202151903 Page: 6 of 12 3.3 Separation Distance Minimum test separation distance: 20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. EMC-TRF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Gua…

Text truncated - open the document above for the full version.

SPECIFICATION FOR APPROVAL CUSTOMER : 比亚迪 PART NAME : 灯带 PART NO. : WIFI (2.4G ） DZZ NO. :N12-7023-ROA REV. : MANUFACTURERR SIGNATURE CUSTOMER SIGNATURE APPROVED BY: DATE: Shenzhen be-comfortable Technology Co. Ltd. Shenzhen be-comfortable technology.co.,LTD 深圳市得自在科技有限公司 Address：No.1606,Build C6,HengFeng industrial city,xixiang street,baoan district,Shenzhen shanghai mengju technology co., LTD 上海市盟钜科技有限公司 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai Shenzhen be-comfortable Technology Co. Ltd. 2.Analyzer Measurement 2.1 Ant 2.4GWIFI passive test results Shenzhen be-comfortable Technology Co. Ltd. 3 2.4G WIFI Peak Gain & Efficiency FreqEffiGain (MHz)(%)(dBi) 240052.361.98 241053.021.84 242053.152.01 243052.981.98 244052.831.63 245052.231.87 246053.431.87 247052.812.02 248051.632.15 249051.262.15 250050.212.14 3D Pattern 由 Autodesk 教育版品制作产 由 Autodesk 教育版品制作产 由 A u t o d e s k 教 育 版 品 制 作 产 由 Autodesk 教育版品制作产 由 A u t o d e s k 教 育 版 品 制 作 产

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.0 Report No.: GZCR211202151901 Page: 1 of 65 FCC ID: RWO-RZ430424 Ricky Liu Manager TEST REPORT Application No.: GZCR2112021519AT Applicant: Razer Inc. Address of Applicant: 9 Pasteur, Suite 100, Irvine, California 92618, United States Manufacturer: Razer (Asia-Pacific) Pte Ltd Address of Manufacturer: Razer SEA HQ, 1 one-north Crescent, #02-01, Singapore 138538 Factory: Razer Technology and Development (Shenzhen) Co., Ltd Address of Factory: East Wing, 3rd Floor, Block 2, Phase 1 of Vision Shenzhen Business Park, Keji South Road, Hi-Tech Industrial Park, Shenzhen 518057, China Equipment Under Test (EUT): EUT Name: Lighting Module Model No.: RZ43-042401, RZ43-042401XX-XXXX (X can be 0-9 or A-Z)   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: RAZER Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2021-12-03 Date of Test: 2021-12-03 to 2021-12-10 Date of Issue: 2023-08-16 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR211202151901 Page: 2 of 65 Revision Record Version Chapter Date Modifier Remark 01 2023-08-16 Original Authorized for issue by: Curry Wu/Project Engineer Ricky Liu/Reviewer EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR211202151901 Page: 3 of 65 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.1.3 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions (Below 1GHz) ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions (Above 1GHz) ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Duty Cycle ANSI C63.10 (2013) Section 11.6 KDB 558074 D01 v05r02 section 6 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR211202151901 Page: 4 of 65 Declaration of EUT Family Grouping Model No:. RZ43-042401, RZ43-042401XX-XXXX (X can be 0-9 or A-Z) Only the model RZ43-042401 was tested since according to the declaration from the applicant, the electrical circuit design, PCB layout, component used and internal wiring and function were identical for the above models, with only difference on the Model No. Details as below. RZ43-042401 consist of a LED driver, controller box and a 2 m LED strip (model no.: RC30-042400), can be interconnected to 10m using 1 m LED strip (model no.: RC30-042401). 1 m LED strip (model no.: RC30-042401) will be sold separately without LED driver and controller box. EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR211202151901 Page: 5 of 65 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 5 4 General Information............................................................................................................................ 7 4.1 Details of E.U.T. ........................................................................................................................... 7 4.2 Description of Support Units ......................................................................................................... 7 4.3 Measurement Uncertainty ............................................................................................................ 8 4.4 Test Location ............................................................................................................................... 9 4.5 Test Facility .................................................................................................................................. 9 4.6 Deviation from Standards ............................................................................................................10 4.7 Abnormalities from Standard Conditions ......................................................................................10 5 Equipment List ..................................................................................................................................11 6 Radio Spectrum Technical Requirement ..........................................................................................15 6.1 Antenna Require…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.0 Report No.: GZCR211202151902 Page: 1 of 126 FCC ID: RWO-RZ430424 Ricky Liu Manager TEST REPORT Application No.: GZCR2112021519AT Applicant: Razer Inc. Address of Applicant: 9 Pasteur, Suite 100, Irvine, California 92618, United States Manufacturer: Razer (Asia-Pacific) Pte Ltd Address of Manufacturer: Razer SEA HQ, 1 one-north Crescent, #02-01, Singapore 138538 Factory: Razer Technology and Development (Shenzhen) Co., Ltd Address of Factory: East Wing, 3rd Floor, Block 2, Phase 1 of Vision Shenzhen Business Park, Keji South Road, Hi-Tech Industrial Park, Shenzhen 518057, China Equipment Under Test (EUT): EUT Name: Lighting Module Model No.: RZ43-042401, RZ43-042401XX-XXXX (X can be 0-9 or A-Z)   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: RAZER Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2021-12-03 Date of Test: 2021-12-03 to 2021-12-10 Date of Issue: 2023-08-16 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR211202151902 Page: 2 of 126 Revision Record Version Chapter Date Modifier Remark 01 2023-08-16 Original Authorized for issue by: Curry Wu/Project Engineer Ricky Liu/Reviewer EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR211202151902 Page: 3 of 126 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Sta…

Text truncated - open the document above for the full version.