RYYEYSMJCSComplete Class 2 Bluetooth Module

24-Aug.-2007 Ver.0.1 TAIYO YUDEN Confidential & Tentative 1/40 TAIYO YUDEN EYSMJCS Bluetooth ® Module EYSMJCS (RF+Baseband (Class 2) USB) User’s Manual The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. In case you adopt this module and design some appliance, please ask for the latest specifications from the local sales office. We wish the customer to request the Specification Report when the design for the mass production begins because the content of this Data Report might change without a previous notice to the customer. 24-Aug.-2007 Ver.0.1 TAIYO YUDEN Confidential & Tentative 2/40 TAIYO YUDEN EYSMJCS Document constituent list Control name Control No. Document Page General Items HD-AG-A071063 1/3 – 3/3 Absolute maximum ratings HD-AM-A071063 1/1 Electrical characteristics HD-AE-A071063 1/3- 3/3 Electrical characteristics HD-AE-B071063 1/2 - 2/2 Electrical characteristics HD-AE-C071063 1/13 - 13/13 Electrical characteristics HD-AE-D071063 1/10- 10/10 Circuit schematic HD-MC-A071063 1/1 Outline / Appearance HD-AD-A071063 1/1 Outline / Appearance HD-AD-B071063 1/1 Pin Layout HD-BA-A071063 1/1 Rev. record 24-Aug.-2007> Ver.0.1 24-Aug.-2007 Ver.0.1 TAIYO YUDEN Confidential & Tentative 3/40 TAIYO YUDEN EYSMJCS Control No. HD-AG-A071063 (1/3) Control name General Items Scope This specification (“Specification”) applies to the hybrid IC “EYSMJCS” for use Bluetooth ® module (“Product”) manufacture by TAIYO YUDEN Co., Ltd. (“TAIYO YUDEN”) 1. User’s Code: EYSMJCS (USB I/F Support) Type: EYSMJCS 2. Function: Radio frequency transfer Module (power class 2). Bluetooth ® standard Ver 2.0+EDR conformity 3. Application: Laptop PC 4. Structure: Hybrid IC loaded with silicon monolithic semiconductor 5. Outline: FFC/FPC Connector Type 6. Marking: TBD 7. Features: -Bluetooth ® 2.0+EDR conformity -USB Interface -Point-to-Multipoint (7 Slaves) -Encryption -Hold, Sniff and Park Mode -Supported Link Type: ACL -AFH -EDR (Enhanced Data Rate) 8. Packing: TBD 9. Terminal: Data input-output (6pin Cable Connector) RF input-output (Antenna) 10. Mount: TBD 11. Notes: a. Any question arising from this Specification shall be solved through mutual discussion by the parties hereof. b. This Product is not designed for radiation durable and should not be used under the circumstance of radiation. 24-Aug.-2007 Ver.0.1 TAIYO YUDEN Confidential & Tentative 4/40 TAIYO YUDEN EYSMJCS Control No. HD-AG-A071063 (2/3) Control name General Items c. The operating conditions of this Product are as shown in this Specification. Please note that TAIYO YUDEN shall not be liable for a failure and/or abnormality which is caused by use under the conditions other than the operating conditions hereof. d. This Product mentioned in this Specification is manufactured for use in Laptop PC. Before using this Product in any special equipment (such as medical equipment, space equipment, air craft, disaster prevention equipment), where higher safety and reliability are duly required, the applicability and suitability of this Product must be fully evaluated by the customer at its sole risk to ensure correct and safety operation of those special equipments. Also, evaluation of the safety function of this Product even for use in general electronics equipment shall be thoroughly made and when necessary, a protective circuit shall be added in design stage, all at the customer’s sole risk. e. TAIYO YUDEN warrants only that this Product is in conformity with this Specification for one year after purchase and shall in no event give any other warranty. f. The warranty period shall be one year. g. Communication between this Product and others might not be established nor maintained depending upon radio environment or operating conditions of this Product and other Bluetooth ® products. h. This Product is designed for use in products which comply with Bluetooth ® Specifications (Ver 2.0+EDR) (“Bluetooth Specifications”). TAIYO YUDEN disclaims and is not responsible for any liability concerning infringement by this Product under any intellectual property right owned by third party in case the customer uses this Product in any product which does not comply with Bluetooth Specifications (the “non-complying products”). Furthermore, TAIYO YUDEN warrants only that this Product complies with this Specification and does not grant any other warranty including warranty for application of the non-complying products. i. TAIYO YUDEN dose not render updating or upgrading service for the firmware in the Module. j. In order to take tests for getting the certification of each country’s Radio Law with a device incorporating this module, it is necessary to make the software in Host to put the module into test condition. Please contact TAIYO YUDEN for farther details. k. Please evaluate adequately our module incorporated to your products before mass production. l. This Product operates in the unlicensed ISM band at 2.4GHz. In case this Product is used around the other wireless devices which operate in same frequency band of this Product, there is a possibility that interference occurs between this Product and such other devices. If such interference occurs, please stop the operation of other devices or relocate this Product before using this Product or do not use this Product around the other wireless devices. 24-Aug.-2007 Ver.0.1 TAIYO YUDEN Confidential & Tentative 5/40 TAIYO YUDEN EYSMJCS Control No. HD-AG-A071063 (3/3) Control name General Items m. Containment of hazardous substance in this Product *Pb (Lead) : Non use *Additional RoHS regulation substance (Cd.Hg.Cr+6.PBB.PBDE) :Non use n. In addition when this Product is used under environmental conditions such as over voltage which are not guaranteed ,it may be destroyed in short mode. To ensure the security of customer’s product, please add an extra fuse or/and a protection circuit for over voltage. p. In some cases, TAIYO YUDEN may use …

Text truncated - open the document above for the full version.

Measurement data of antenna 20040709T5-1/2 Measured in Satimo Stargate system at TAIYO YUDEN R&D CENTER. Antenna sample: AF_216M2450TAIYO YUDEN CO.,LTD. Antenna size: 2.5 x 1.6 [mm] Antenna on evaluation PCB (52 x 10 [mm]) Radiation pattern XY-plane @2.45 GHz (-X) Peak gain unit: dBi Frequency [GHz] @[email protected]@2.5 XY-planetheta-6.8-6.9-6.7 phi-0.20.0-0.1 YZ-planetheta 1.5 1.8 2.0 phi-18.5-17.9-17.8 (-Y) (+Y) ZX-planetheta-3.9-3.9-3.4 phi-0.10.60.6 Average gain unit: dBi Frequency [GHz] @[email protected]@2.5 unit: dBi (+X) XY-planetheta-8.2-8.2-8.3 YZ-plane @2.45 GHzphi-3.9-3.7-3.7 (+Z) Ave(t,p)-5.5-5.4-5.4 YZ-planetheta-3.1-2.8-2.7 phi-26.5-26.7-26.4 Ave(t,p)-6.0-5.8-5.7 ZX-planetheta-8.8-8.5-8.4 phi-0.9-0.6-0.4 Ave(t,p)-3.2-2.9-2.8 (-Y) (+Y) Total theta -5.9-5.7-5.6 phi -3.9-3.6-3.5 Ave(t,p) -4.8-4.5-4.4 unit: dBi (-Z) ZX-plane @2.45 GHz VSWR characteristics (+Z) (E)8 (+X) (-X) unit: dBi (-Z) *theta=Vertical polar, phi=Horizontal polar Efficiency Frequency [GHz] @[email protected]@2.5 Efficiency [dB] -1.7-1.4-1.3 09.Jul.2004 *Note:Total Ave.Gain={XY(V)+XY(H)+YZ(V)+YZ(H)+ZX(V)+ZX(H)}/6 *Note:The value is average value in 1 round of each inclination direction angle. AF 216M245001 -45 -35 -25 -15 -5 5 Ave(t,p) theta phi -45 -35 -25 -15 -5 5 Ave(t,p) theta phi -45 -35 -25 -15 -5 5 Ave(t,p) theta phi TAIYO YUDEN CONFIDENTIAL +Y +X +Z phi=0 180 90270 theta=0 180 *phi=180 90 *phi=0 90 +Y +X +Z *phi=270 90 theta=0 *phi=90 90 +Y +X +Z 180 3 2 +Y (Right) +Z (Up) +X (Front) Theta Phi

RF_734_00, Issue 1 Modular Approval Request FCC (per DA 00-1407) FCC ID: RYYEYSMJCS Items to be covered Answer from applicant 1. The modular transmitter must have its own RF shielding. This module has RF shielding with metal case. Refer to external photo. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Using IC has buffered circuit. 3. The modular transmitter must have its own power supply regulation. This Module has its own regulator. Refer to Block diagram. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable).. Yes, this module use ceramic chip antenna attached with solder. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Yes, this testing is performed by stand-alone configuration. 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. The label of this module with its own FCC ID is put on PCB. Exterior label instruction to installer of this module is provided in user manual. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Instruction for operational requirements is provided in user manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. This module complies with RF exposure requirements and instruction for users is provided in the user manual. Note: If compliance with one or more of the numbered requirements, listed above, cannot be demonstrated, it may be possible to obtain a “Limited Modular Approval” (LMA). Name and surname of applicant (or authorized representative): Jiro Ogiwara Date: 29 th August 2007 Signature:

External photos EYSMJCS Front View Rear View

Outline  6.0 x 17.5mm (tolerance  0.5mm) Material  PETWH50(A) PAT1 Label information Above 3mm Label1 Case-side (    ⦁ 1 晰 褩 ) 201 WW 07215204 Taiyo Yuden Co.,Ltd. Product Number:EYSMJCS 2 . 4 F H 1 A B C D E F G H I J K CA46920-0316 01A User Code : EYSMJCSFX    ⦁ 䡤 褩  EYSMJCS TAIYO YUDEN Diagram Number Revision ID    ⦁ 2 䡤 褩  Overlap width IC: 4389B-EYSMJCS FCC ID:RYYEYSMJCS XXX-XXXXXXX Label information Label2 Case-side (    ⦁ 2 晰 褩 ) Outline  6.0 x 18.5mm (tolerance  0.5mm) Material  PETWH50(A) PAT1 EYSMJCS TAIYO YUDEN ( 䈆 晒 ⦁ ) LOT.No 00037AAAAAAA  The CE Mark is also displayed on a packing box. Label information Label3 Back-side Outline  6.0 x 18.5mm (tolerance  0.5mm) Material  PETWH50(A) PAT1 䈆 晒 ⦁ EYSMJCS TAIYO YUDEN              Unit: mm, Tolerances unless otherwise specified: +/-0.2mm Outline EYSMJCS TAIYO YUDEN The Label2 is directly put on the shieldihg case.Then the Label1 is put on top of the Label2.

Internal photos EYSMJCS Front View Rear View

Declaration on radiation safety standard conformance To whom it may concern: Taiyo Yuden Co., Ltd., EMC Center 5607-2 Nakamuroda-machi 370-3347 Takasaki-shi Gunma Japan declares that the following product Description : Complete Class 2 Bluetooth Module FCC ID : RYYEYSMJCS Manufacturer : Taiyo Yuden Co., Ltd. Brand : Taiyo Yuden Co., Ltd. Model : EYSMJCS has a maximum e.i.r.p. of 3.0 dBm (2 mW, maximum conducted output power of 1 dbm plus antenna gain of 2 dBi) in the frequency range of 2400 ñ 2483.5 MHz, which means that the worst case prediction of power density (100% reflection) at 20 cm distance (worst case) can be calculated as follows : EIRP S = 4*π * R 2 (power density without reflection) 2 2 *EIRP S = 4*π * R 2 (power density with 100% reflection) 2 2 *EIRP 2 mW S = 4*π * R 2 = π*(20cm) 2 = 0.002 mW/cm 2 (limit = 1.0 mW/cm 2 ) This means that according to OET Bulletin 65 (Edition 97-01), Supplement C (Edition 01-01), the equipment fulfills the requirements on power density for general population/uncontrolled exposure and therefore fulfills the requirements of 47 CFR Part 15.247 (b)(5).

Radio test report 20072023301 based on: - 47 CFR Part 15C, section 15.247 (01-OCT-06 Edition); - 47 CFR Part 15C, section 15.205 (01-OCT-06 Edition); - 47 CFR Part 15C, section 15.209 (01-OCT-06 Edition); - RSS-210, Issue 7 (June 2007 edition); - RSS-Gen, Issue 2 (June 2007 edition). Complete Class 2 Bluetooth Module Taiyo Yuden EYSMJCS Report number : 20072023301 Contents MAIN MODULE............................................................................................................................................4 1 I NTRODUCTION ....................................................................................................................................4 2 P RODUCT .............................................................................................................................................5 3 T EST SCHEDULE ...................................................................................................................................5 4 P RODUCT DOCUMENTATION .................................................................................................................5 5 O BSERVATIONS AND COMMENTS .........................................................................................................6 6 M ODIFICATIONS TO THE SAMPLE ..........................................................................................................7 7 S UMMARY ............................................................................................................................................7 8 C ONCLUSIONS ......................................................................................................................................8 TEST RESULTS MODULE .........................................................................................................................9 1 G ENERAL INFORMATION ......................................................................................................................9 1.1 Equipment information ...................................................................................................................9 1.2 Tested channels...............................................................................................................................9 2 S UMMARY OF TEST DATA ...................................................................................................................10 3 E MISSION TESTS .................................................................................................................................11 3.1 Carrier frequency separation.........................................................................................................11 3.1.1 Test method .........................................................................................................................................11 3.1.2 Test results...........................................................................................................................................11 3.2 Number of hopping frequencies ...................................................................................................14 3.2.1 Test method .........................................................................................................................................14 3.2.2 Test results...........................................................................................................................................14 3.3 Average time of occupancy ..........................................................................................................21 3.3.1 Test method .........................................................................................................................................21 3.3.2 Test results...........................................................................................................................................21 3.4 20 dB bandwidth...........................................................................................................................29 3.4.1 Test method .........................................................................................................................................29 3.4.2 Test results...........................................................................................................................................29 3.5 Peak output power ........................................................................................................................35 3.5.1 Test method .........................................................................................................................................35 3.5.2 Test results...........................................................................................................................................35 3.6 Band-edge compliance of RF conducted emissions .....................................................................41 3.6.1 Test method .........................................................................................................................................41 3.6.2 Test results...........................................................................................................................................41 3.7 Spurious RF conducted emissions ................................................................................................49 3.7.1 Test method .........................................................................................................................................49 3.7.2 Test results...........................................................................................................................................49 3.8 Emission in the restricted bands nearest to the frequency band 2400 – 2483.5 MHz ..................68 3.8.1 Test method ....................................................................................................................…

Text truncated - open the document above for the full version.

FCC ID: RYYEYSMJCS Photographs module 20072023301 Test setup PHOTOGRAPH 1: TEST SETUP RADIATED EMISSIONS - FRONT........................................................................... 2 PHOTOGRAPH 2: TEST SETUP RADIATED EMISSIONS - BACK............................................................................ 3 PHOTOGRAPH 3: TEST SETUP RADIATED EMISSIONS - CLOSEUP....................................................................... 4 Page: 2 of 4 Report number: 20072023301 FCC ID: RYYEYSMJCS Photograph 1: Test setup radiated emissions - front Page: 3 of 4 Report number: 20072023301 FCC ID: RYYEYSMJCS Photograph 2: Test setup radiated emissions - back Page: 4 of 4 Report number: 20072023301 FCC ID: RYYEYSMJCS Photograph 3: Test setup radiated emissions - closeup