RYYEYSPBNBluetooth low energy/ ANT/ 802.15.4 Module

21-Aug.2020 Ver.0.1 TAIYO YUDEN CO., LTD. TAIYO YUDEN CO., LTD. 1/4 EYSPBN User manual (for EYSPBN) FCC ID: RYYEYSPBN IC Number: 4389B-EYSPBN 21-Aug.2020 Ver.0.1 TAIYO YUDEN CO., LTD. TAIYO YUDEN CO., LTD. 2/4 EYSPBN Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification (installation procedure). The following information must be indicated on the host device of this module; 1) Japan Regulatory Information a) This module is approved with the specific antenna on this module. b) Please ensure that your product can bear a label with the following information. If the product is so small that it is not practicable to place the label, please place it in the instruction manual and package. This product installs a radio system which has been approved as a radio station in a low power data communication system based on the Radio Law. EYSPBN : 005-102522 2) Canada Regulatory Information (PMN: Bluetooth low energy/ ANT/ 802.15.4 Module) a) This device complies with Industry Canada’s applicable licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. b) This product is certified as type of the portable device with Industry Canada Rules. To maintain compliance with RF Exposure requirement, please use within specification of this product and have a separation distance of minimum 10 mm between the user and/or bystander and the antenna and /or radiating element. This distance ensures that the output power (e.i.r.p.) of EYSPBN is below the SAR evaluation Exemption limits defined in RSS-102 issue 5. Ce produit est certifié comme type de l'appareil portable avec Industrie Règles de Canada. Pour maintenir l'acquiescement avec exigence Exposition de RF, veuillez utiliser dans spécification de ce produit et respecter une distance de séparation d'au moins 15 mm entre l'utilisateur et / ou un tiers et l'antenne et / ou l'élément rayonnant. Cette distance garantit que la puissance de sortie (p.i.r.e.) d’EYSPBN est inférieure aux limites d’exemption de l’évaluation SAR définies dans le numéro 5 de la norme RSS-102. - IC: 4389B-EYSPBN 21-Aug.2020 Ver.0.1 TAIYO YUDEN CO., LTD. TAIYO YUDEN CO., LTD. 3/4 EYSPBN c) Please notify certified ID by either one of the following method on your product. -Contains IC : 4389B-EYSPBN Specifiez ID certifiée dans votre produit par une de méthode suivante. -Contains IC : 4389B-EYSPBN 3) FCC Regulatory Information a) This device complies with part 15 of the FCC Rules. -Part 15 Subpart C b) Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. c) Please notify certified ID by either one of the following method on your product. -Contains Transmitter Module FCC ID: RYYEYSPBN -Contains FCC ID: RYYEYSPBN d) CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the use’s authority to operate the equipment. e) The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. f) This product is certified as type of the portable device with FCC Rules. To maintain compliance with RF Exposure requirement, please use within specification of this product. g) The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. h) This module can change the output power depending on the circumstances by the application software which is developed by module installer. Any end user cannot change the output power. The test software is developed by TAIYO YUDEN, and during regulatory testing the output power is set to maximum power. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. 21-Aug.2020 Ver.0.1 TAIYO YUDEN CO., LTD. TAIYO YUDEN CO., LTD. 4/4 EYSPBN 4) CE Regulatory Information a) When your end product ins…

Text truncated - open the document above for the full version.

QF094234 Page 1 of 1 Revision 0 Authority to Act as Agent Date: 2020-08-19 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern: I appoint TUV Taiwan to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with TAIYO YUDEN CO., LTD. / 43-1, Yawatabara- machi, Takasaki-shi, Gunma, 370-0024, Japan For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 2020-12-31 By : Hideki Kato (Signature) (Print Name) Title : Deputy General Manager Telephone : 81-27-346-9185 Ext.625 On behalf of : TAIYO YUDEN CO., LTD. (Company Name)

Confidentiality Letter Date: 2020-08-19 Subject: Confidentiality Request for FCC ID: RYYEYSPBN and IC: 4389B-EYSPBN ; Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Part List/Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent User’s Manual TAIYO YUDEN CO., LTD. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04- 1705. Sincerely, By: Hideki Kato (Signature/Title) (Print name)

Applicant/Grantee TAIYO YUDEN CO., LTD. FCC ID: RYYEYSPBN Section 15.212 Modular Transmitters / X Request for Modular Approval Request for Limited Modular Approval Requirements Device Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements must have the radio frequency circuitry must be shielded. Physical/discrete and tuning capacitors may be located external to the shield, but must be on the module assembly. The module has its own RF shielding.” Shield Can is employed on the board structure, please see exhibition External Photo, the emission measurement was conducted without further shielding added. Y 2 The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply with the requirements set out in the applicable RSS standard under conditions of excessive data rates or over-modulation. All modulation and data input(s) are buffered.” The EUT has buffered data inputs, it is integrated on the RF chip Y 3 The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module. Requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module. Output power is controlled by the RF Chip and de-coupled from supply voltage variations. Frequencies are determined by Crystal Y 4 The module shall comply with the provisions for external power amplifiers and antennas detailed in this standard. The Equipment certification submission shall contain a detailed description of the configuration of all antennas that will be used with the module. The antenna is part of the module Y 5 The module shall be tested for compliance with the applicable standard in a stand- alone configuration, i.e. the module must not be inside another device during testing. The modular transmitter was tested in a stand-alone configuration via a UART Interface. Y 6 The module shall comply with the Category I equipment labelling requirements. In the exhibition OEM manual, there are Instructions given to the OEM on how to label the end product. Y 7 The modular transmitter complies with all specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer will provide adequate instructions along with the module to explain any such requirements. A copy of these instructions is included in this application for equipment authorization: Instructions in User Manual Y 8a Address compliance with the Commission's RF exposure limits in Sections 1.1310 and 2.1093. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF exposure compliance in accordance with Section 15.247(b)(4). Please refer the Maximum Permissible Exposure Information. Y A limited modular approval may be granted for single or split modular transmitters that do not comply with all of the above requirements, e.g., shielding, minimum signaling amplitude, buffered modulation/data inputs, or power supply regulation, if the manufacturer can demonstrate by alternative means in the application for equipment authorization that the modular transmitter meets all the applicable Part 15 requirements under the operating conditions in which the transmitter will be used. Limited modular approval also may be granted in those instances where compliance with RF exposure rules is demonstrated only for particular product configurations. The applicant for certification must state how control of the end product into which the module will be installed will be maintained such that full compliance of the end product is always ensured. Signature Name/Title: Hideki Kato / Deputy General Manager Company Name: TAIYO YUDEN CO., LTD. Date: 19/08/2020

Appendix EPPhoto Documentation Page 1 of 360404737 001, 60404738 001 Product:Bluetooth low energy/ ANT/ 802.15.4 Module Type Identification:EYSPBN

HD-AD- unit:mm Description of laser Marking 1) Model (upper 6 digits): EYSPBN 2) User-Code: 3) Manufacturer : TAIYO YUDEN 4) Japan ID: XXX-XXXXXX 5) ISED number: 4389B-EYSPBN 6) FCC ID: RYYEYSPBN 7) Product Lot number: Four digits (Refer to [Instruction for Lot Number]) 8) 1pin mark 9) Japan logo mark：Specified logo mark TAIYO YUDEN CO.,LTD. Outline･Appearance 外形・外観図 （1／1） Control No.Title APPROVEDDESIGNEDDRAWNCHECKED 1 5 . 4 0 2 . 0 0 M a x 1 0 . 0 0 Model：EYSPBN User-Code TAIYO YUDEN LOT 1) 2) 3) 4) 5) 6) 7) 8) 9) R XXX-XXXXXX IC：4389B-EYSPBN FCC ID：RYYEYSPBN

Appendix EPPhoto Documentation Page 2 of 360404737 001, 60404738 001 Product:Bluetooth low energy/ ANT/ 802.15.4 Module Type Identification:EYSPBN Antenna Appendix EPPhoto Documentation Page 3 of 360404737 001, 60404738 001 Product:Bluetooth low energy/ ANT/ 802.15.4 Module Type Identification:EYSPBN

Produkte Products Prüfbericht - Nr.: Test Report No. 60404737 001 Seite 32 von 32 Page 32 of 32 6. Safety Human Exposure 6.1 RF Exposure Compliance 6.1.1 SAR Test Exclusion Thresholds Results Since the maximum output power of the transmitter is 5.83 mW < 10 mW (Distance: 5 mm), hence the EUT is excluded from SAR evaluation according to FCC KDB publication 447498 D01: Mobile Portable RF Exposure.

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: 60404737 001 Auftrags-Nr.: Order no.: 238487762 Seite 1 von 32 Page 1 of 32 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 12-Jun-2020 Auftraggeber: Client: TAIYO YUDEN CO., LTD. 43-1, Yawatabara-machi, Takasaki-shi, Gunma, 370-0024, Japan Prüfgegenstand: Test item: Bluetooth low energy/ ANT/ 802.15.4 Module Bezeichnung / Typ-Nr.: Identification / Type no.: EYSPBN Auftrags-Inhalt: Order content: FCC Part 15C Test report Prüfgrundlage: Test specification: FCC 47CFR Part 15: Subpart C Section 15.247 Wareneingangsdatum: Date of sample receipt: 15-Jul-2020 Prüfmuster-Nr.: Test sample no: A002859576-002 Prüfzeitraum: Testing period: 20-Jul-2020 – 4-Aug-2020 Ort der Prüfung: Place of testing: EMC/RF Laboratory Taipei Prüflaboratorium: Testing laboratory: Taipei Testing Laboratories Prüfergebnis*: Test result*: Pass überprüft von: reviewed by: Jack H.C. Chang genehmigt von authorized by: Brenda S.H. Chen Datum: 18-Aug-2020 Date: Datum: 19-Aug-2020 Date: Stellung / Position: Project Manager Stellung / Position: Project Manager Sonstiges / Other: Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = bef riedigend 4 = ausreichend 5 = mangelhaf t P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfm uster und darf ohne Genehm igung der Prüfstelle nicht auszugsw eise vervielfältigt w erden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. T UV Rheinland T aiwan Ltd. 11F., No. 758, Sec. 4, Bade Rd., T aipei 105, T aiwan, R.O.C. Mail: [email protected] Web: www.tuv.com Produkte Products Prüfbericht - Nr.: Test Report No. 60404737 001 Seite 2 von 32 Page 2 of 32 TEST SUMMARY Report Section FCC Clause Test Item Result 5.1.1 15.247(b) & 15.203 Antenna Requirement Pass 5.1.2 15.247(b) Peak Output Power Pass 5.1.3 15.247(a)(2) 6 dB Bandwidth Pass 5.1.3 2.1049 99% Occupied Bandwidth Pass 5.1.4 15.247(e) Power Spectral Density Pass 5.1.5 15.247(d) Conducted Spurious Emissions and Band Edges Pass 5.1.6 15.247(d) & 15.205 & 15.209 Radiated Spurious Emissions and Band Edges Pass 5.2.1 15.207 Mains Conducted Emission Pass 6.1 FCC KDB 447498 D01 v06 RF Exposure Compliance Pass Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. Produkte Products Prüfbericht - Nr.: Test Report No. 60404737 001 Seite 3 von 32 Page 3 of 32 Contents HISTORY OF THIS TEST REPORT .................................................................................. 5 1. GENERAL REMARKS .................................................................................................. 6 1.1 COMPLEMENTARY MATERIALS ................................................................................... 6 1.2 DECISION RULE OF CONFORMITY ............................................................................... 6 2. TEST SITES................................................................................................................ 7 2.1 TEST LABORATORY ................................................................................................... 7 2.2 TEST FACILITY ........................................................................................................... 7 2.3 TRACEABILITY ........................................................................................................... 8 2.4 CALIBRATION............................................................................................................. 8 2.5 MEASUREMENT UNCERTAINTY ................................................................................... 8 3. GENERAL PRODUCT INFORMATION ............................................................................ 9 3.1 PRODUCT FUNCTION AND INTENDED USE ................................................................... 9 3.2 SYSTEM DETAILS AND RATINGS ................................................................................. 9 3.3 NOISE GENERATING AND NOISE SUPPRESSING PARTS............................................. 10 3.4 SUBMITTED DOCUMENTS ......................................................................................... 10 4. TEST SET-UP AND OPERATION MODES .................................................................... 11 4.1 PRINCIPLE OF CONFIGURATION SELECTION.............................................................. 11 4.2 CARRIER FREQUENCY AND CHANNEL ...................................................................... 11 4.3 TEST OPERATION AND TEST SOFTWARE .................................................................. 13 4.4 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT................................................ 14 4.5 TEST SETUP DIAGRAM............................................................................................. 15 5. TEST RESULTS ........................................................................................................ 16 5.1 TRANSMITTER REQUIREMENT & TEST SUITES .......................................................... 16 5.1.1 Antenna Requirement ............................................................................................. 16 5.1.2 Peak Output Power .........................................................................…

Text truncated - open the document above for the full version.

Prüfbericht - Nr.: Test Report No. 60404737 001 Seite A19 von A25 Page A19 of A25 Test Result of Conducted Band Edge, Tx Mode ANT 1Mbps Low Channel High Channel Prüfbericht - Nr.: Test Report No. 60404737 001 Seite A20 von A25 Page A20 of A25 Nordic Original 2Mbps Low Channel High Channel Prüfbericht - Nr.: Test Report No. 60404737 001 Seite A21 von A25 Page A21 of A25 Test Result of 6 dB Bandwidth IEEE802.15.4 Channel Channel Frequency (MHz) 6 dB Bandwidth (kHz) Limit (kHz) Result Low Channel 2405 1198.8 > 500 Pass Middle Channel 2440 1213.8 > 500 Pass High Channel 2475 1223.8 > 500 Pass Low Channel Middle Channel High Channel Prüfbericht - Nr.: Test Report No. 60404737 001 Seite A22 von A25 Page A22 of A25 Test Result of 99% Occupied Bandwidth IEEE802.15.4 Channel Channel Frequency (MHz) 99% Bandwidth (KHz) Low Channel 2405 2232.7 Middle Channel 2440 2237.7 High Channel 2475 2242.7 Low Channel Middle Channel High Channel Prüfbericht - Nr.: Test Report No. 60404737 001 Seite A23 von A25 Page A23 of A25 Test Result of Power Spectral Density IEEE802.15.4 Channel Channel Frequency (MHz) Power Density (dBm/3kHz) Limit (dBm/3kHz) Result Low Channel 2405 -5.60 8 Pass Middle Channel 2440 -5.80 8 Pass High Channel 2475 -6.05 8 Pass Low Channel Middle Channel High Channel Prüfbericht - Nr.: Test Report No. 60404737 001 Seite A24 von A25 Page A24 of A25 Test Result of Conducted Spurious Emissions, Tx Mode IEEE802.15.4 Low Channel Middle Channel High Channel Prüfbericht - Nr.: Test Report No. 60404737 001 Seite A25 von A25 Page A25 of A25 Test Result of Conducted Band Edge, Tx Mode IEEE802.15.4 Low Channel High Channel Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B1 von B44 Page B1 of B44 Appendix B: Test Results of Radiated Spurious Emissions & Mains Conducted Emission Test Band Edges, 2.31GHz ~ 2.9GHz Bluetooth Low Energy 1Mbps Low Channel (Horizontal) Peak Low Channel (Vertical) Peak Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B2 von B44 Page B2 of B44 Bluetooth Low Energy 1Mbps Low Channel (Horizontal) Average Low Channel (Vertical) Average Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B3 von B44 Page B3 of B44 Bluetooth Low Energy 1Mbps High Channel (Horizontal) Peak High Channel (Vertical) Peak Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B4 von B44 Page B4 of B44 Bluetooth Low Energy 1Mbps High Channel (Horizontal) Average High Channel (Vertical) Average Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B5 von B44 Page B5 of B44 Bluetooth Low Energy 2Mbps Low Channel (Horizontal) Peak Low Channel (Vertical) Peak Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B6 von B44 Page B6 of B44 Bluetooth Low Energy 2Mbps Low Channel (Horizontal) Average Low Channel (Vertical) Average Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B7 von B44 Page B7 of B44 Bluetooth Low Energy 2Mbps High Channel (Horizontal) Peak High Channel (Vertical) Peak Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B8 von B44 Page B8 of B44 Bluetooth Low Energy 2Mbps High Channel (Horizontal) Average High Channel (Vertical) Average Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B9 von B44 Page B9 of B44 Spurious Emissions, Tx Mode, 9kHz ~ 30MHz Bluetooth Low Energy 2Mbps High Channel 9kHz~150kHz High Channel 150kHz~30MHz Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B10 von B44 Page B10 of B44 Spurious Emissions, Tx Mode, 30MHz ~ 1GHz Bluetooth Low Energy 2Mbps High Channel (Horizontal) High Channel (Vertical) Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B11 von B44 Page B11 of B44 Spurious Emissions, Tx Mode, 1GHz ~ 26.5GHz Bluetooth Low Energy 1Mbps Low Channel (Horizontal) Low Channel (Vertical) Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B12 von B44 Page B12 of B44 Bluetooth Low Energy 1Mbps Middle Channel (Horizontal) Middle Channel (Vertical) Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B13 von B44 Page B13 of B44 Bluetooth Low Energy 1Mbps High Channel (Horizontal) High Channel (Vertical) Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B14 von B44 Page B14 of B44 Bluetooth Low Energy 2Mbps Low Channel (Horizontal) Low Channel (Vertical) Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B15 von B44 Page B15 of B44 Bluetooth Low Energy 2Mbps Middle Channel (Horizontal) Middle Channel (Vertical) Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B16 von B44 Page B16 of B44 Bluetooth Low Energy 2Mbps High Channel (Horizontal) High Channel (Vertical) Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B17 von B44 Page B17 of B44 Mains Conducted Emission, 150kHz ~ 30MHz Worst Band (Line) (Neutral) Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B18 von B44 Page B18 of B44 Band Edges, 2.31GHz ~ 2.9GHz ANT 1Mbps Low Channel (Horizontal) Peak Low Channel (Vertical) Peak Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B19 von B44 Page B19 of B44 ANT 1Mbps Low Channel (Horizontal) Average Low Channel (Vertical) Average Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B20 von B44 Page B20 of B44 ANT 1Mbps High Channel (Horizontal) Peak High Channel (Vertical) Peak Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B21 von B44 Page B21 of B44 ANT 1Mbps High Channel (Horizontal) Average High Channel (Vertical) Average Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B22 von B44 Page B22 of B44 Nordic Original 2Mbps Low Channel (Horizontal) Peak Low Channel (Vertical) Peak Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B23 von B44 Page B23 of B44 Nordic Original 2Mbps Low Channel (Horizontal) Average Low Channel (Vertical) Average Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B24 von B44 Page B24 of B44 Nordic Original 2Mbps High Channel (Horizontal) Peak High Channel (Vertical) Peak Prüfbericht - Nr.: Test Report No. 60404737 001 Seite B25 von B44 Page B25 of B44 Nordic Original 2Mbps High Channel (Horizontal) Average High Channel (Vertical) Average Prüfbericht - Nr.: Test Report …

Text truncated - open the document above for the full version.

Appendix SP Photo Documentation Page 1 of 5 60404737 001, 60404738 001 Product: Bluetooth low energy/ ANT/ 802.15.4 Module Type Identification: EYSPBN Photographs of the Test Set-Up Photograph 1: Set-up for Spurious Emissions (Front View 1) Photograph 2: Set-up for Spurious Emissions (Front View 2) Appendix SP Photo Documentation Page 2 of 5 60404737 001, 60404738 001 Product: Bluetooth low energy/ ANT/ 802.15.4 Module Type Identification: EYSPBN Photograph 3: Set-up for Spurious Emissions (Back View 1) Photograph 4: Set-up for Spurious Emissions (Back View 2) Appendix SP Photo Documentation Page 3 of 5 60404737 001, 60404738 001 Product: Bluetooth low energy/ ANT/ 802.15.4 Module Type Identification: EYSPBN Photograph 5: Set-up for Spurious Emissions (Back View 3) Photograph 6: Set-up for Spurious Emissions (Back View 4) Appendix SP Photo Documentation Page 4 of 5 60404737 001, 60404738 001 Product: Bluetooth low energy/ ANT/ 802.15.4 Module Type Identification: EYSPBN Photograph 7: Set-up for Conducted Test Photograph 8: Set-up for Conducted Test Appendix SP Photo Documentation Page 5 of 5 60404737 001, 60404738 001 Product: Bluetooth low energy/ ANT/ 802.15.4 Module Type Identification: EYSPBN Photograph 9: Set-up for AC Mains (Front View) Photograph 10: Set-up for AC Mains (Back View)