RYYEYXFDCComplete Class2 Bluetooth Module

29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential & Tentative 1/17 TAIYO YUDEN EYSFDCSXX Bluetooth ® Module EYSFDCSXX (RF+Baseband (Class 2) USB) Data Report The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. In case you adopt this module and design some appliance, please ask for the latest specifications from the local sales office. 29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential & Tentative 2/17 TAIYO YUDEN EYSFDCSXX Document constituent list Control name Control No. Document Page General Items HD-AG-A031272 1/3 – 3/3 Absolute maximum ratings HD-AM-A031272 1/1 Electrical characteristics HD-AE-A031272 1/3- 3/3 Electrical characteristics HD-AE-C031272 1/1 Circuit schematic HD-MC-A031272 1/1 Outline / Appearance HD-AD-A031272 1/2 - 2/2 Outline / Appearance HD-AD-B031272 1/1 Pin Layout HD-BA-A031272 1/2 - 2/2 Rev. record 24-Sep.-2004> Ver.0.9 Draft 1-Dec.-2004> Ver.1.0 Released 29-Mar-2005>Ver.1.1 Released 29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential & Tentative 3/17 TAIYO YUDEN EYSFDCSXX Control No. HD-AG-A031272 (1/3) Control name General Items Scope This specification (“Specification”) applies to the hybrid IC “EYSFDCSXX” for use Bluetooth ® module (“Product”) manufacture by TAIYO YUDEN Co., Ltd. (“TAIYO YUDEN”) 1. Part Number: EYSFDCSXX (USB I/F Support) Digit3: Customer Code ex) S: TAIYO YUDEN Standard Digit8: Software Code ex) X: TAIYO YUDEN Standard Digit9: Hardware Code ex) X: TAIYO YUDEN Standard *Part number may be modified for mass production or other cases. Please see “m” for more information. 2. Function: Radio frequency transfer Module (power class 2). Bluetooth ® standard Ver 2.0+EDR conformity 3. Application: Note PC, PDA 4. Structure: Hybrid IC loaded with silicon monolithic semiconductor 5. Outline: Connector Type 6. Marking: TBD 7. Features: -Bluetooth ® 2.0+EDR conformity -USB Interface -Point-to-Multipoint (7 Slaves) -Encryption -Hold, Sniff and Park Mode -Supported Link Type: ACL (Not support Voice Over HCI) -AFH&Co-existence -EDR(Enhanced Data Rate) 8. Packing: Packaging method: TBD Packaging unit:TBD Material of tray: TBD Tray Specification: TBD 9. Terminal: Data input-output (20pin Board to Board Connector) RF input-output (Antenna) 10. Mount: Mounted with M2 screw 11. Notes: a. Any question arising from this Specification shall be solved through mutual discussion by the parties hereof. b. This Product is not designed for radiation durable and should not be used under the circumstance of radiation. c. The operating conditions of this Product are as shown in this Specification. Please note that TAIYO YUDEN shall not be liable for a failure and/or abnormality which is caused by use under the conditions other than the operating conditions hereof. 29-Mar.-2005 Ver.1.1 TAIYO YUDEN Confidential & Tentative 4/17 TAIYO YUDEN EYSFDCSXX Control No. HD-AG-A031272 (2/3) Control name General Items d. This Product mentioned in this Specification is manufactured for use in Note PCs, PDAs and Cellular Phones. Before using this Product in any special equipment (such as medical equipment, space equipment, air craft, disaster prevention equipment), where higher safety and reliability are duly required, the applicability and suitability of this Product must be fully evaluated by the customer at its sole risk to ensure correct and safety operation of those special equipments. Also, evaluation of the safety function of this Product even for use in general electronics equipment shall be thoroughly made and when necessary, a protective circuit shall be added in design stage, all at the customer’s sole risk. e. TAIYO YUDEN warrants only that this Product is in conformity with this Specification for one year after purchase and shall in no event give any other warranty. f. The warranty period shall be one year. g. Communication between this Product and others might not be established nor maintained depending upon radio environment or operating conditions of this Product and other Bluetooth ® products. h. This Product is designed for use in products which comply with Bluetooth ® Specifications (ver 2.0+EDR) (“Bluetooth Specifications”). TAIYO YUDEN disclaims and is not responsible for any liability concerning infringement by this Product under any intellectual property right owned by third party in case the customer uses this Product in any product which does not comply with Bluetooth Specifications (the “non-complying products”). Furthermore, TAIYO YUDEN warrants only that this Product complies with this Specification and does not grant any other warranty including warranty for application of the non-complying products. i. TAIYO YUDEN dose not render updating or upgrading service for the firmware in the Module. j. In order to take tests for getting the certification of each country’s Radio Law with a device incorporating this module, it is necessary to make the software in Host to put the module into test condition. Please contact TAIYO YUDEN for farther details. k. Please evaluate adequately our module incorporated to your products before mass production. l. This Product operates in the unlicensed ISM band at 2.4GHz. In case this Product is used around the other wireless devices which operate in same frequency band of this Product, there is a possibility that interference occurs between this Product and such other devices. If such interference occurs, please stop the operation of other devices or relocate this Product before using this Product or do not use this Product around the other wireless devices. m. Part Number Modification Notice (Bluetooth ® Modules) Part numbers for sample modules or part numbers you see in this Specification are TAIYO YUDEN standard part numbers. In case of modification made to any modules, to meet requested specifics, the part number will carry a different part number, due to forfeit originality. Additionally, part numbers may be modified based on mass production stage, Blueto…

Text truncated - open the document above for the full version.

Modular Approval Request (per DA 00-1407) FCC ID: RYYEYXFDC_______ Items to be covered Answer from applicant 1. The modular transmitter must have its own RF shielding. Yes, this module has RF shielding. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Yes, using IC has buffered circuit. 3. The modular transmitter must have its own power supply regulation. Yes, this module has power supply regulator. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable).. Yes, this module use mounted chip antenna only. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Yes, this testing is performed by stand-alone configuration. 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. Yes, label of this module is put on PCB. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Yes, we provide adequate instructions. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Yes, this module comply RF exposure requirements. Note: If compliance with one or more of the numbered requirements, listed above, cannot be demonstrated, it may be possible to obtain a “Limited Modular Approval” (LMA).

Taiyo Yuden Co., Ltd. C C o o m m p p l l e e t t e e C C l l a a s s s s 2 2 B B l l u u e e t t o o o o t t h h M M o o d d u u l l e e Taiyo Yuden Co., Ltd. EYSFDCSXX _External Photo 1.FRONT VIEW 2.REAR VIEW

EYSFDCSXX Label Information 1. FRONT 2.4FH1 *********** 太陽誘電株式会社 EYSFDCSXX Taiyo Yuden Co., Ltd. Made in Japan **** 型式 : EYXFDCS *********** R T ************* 2. REAR 00037A00A000 FCC ID : RYYEYXFDC IC : 4389A-EYXFDC Taiyo Yuden Co., Ltd. Made in Japan P/N : EYSFDCSXX ＃ 以下はシールドケース及びラベル（シール）への記載（案）であり、 赤字は認証時の番号を記載する。青字は、後日申請名を決定する。 ① Shielding case indication description シールドケース表示内容 TELEC １）TELEC logo mark ： Specified logo mark TELECロゴマーク ： 規定ロゴマーク 2）TELEC qualification number ： *********** TELEC認証番号 ： *********** 3）Product number for TELEC ： Draft) EYXFDCS 申請設備の型式名 ： 4）Manufacture (Japanese) ： 太陽誘電株式会社 Others その他 5）ARIB, Actual indication ARIB 現品表示 ： 「第二世代小電力データ通信システム無線設備」であ ることを表記 6）Taiyo Yuden product name ： EYSFDCSXX 太陽誘電製品管理品名 ： EYSFDCSXX 7）Product Lot number ： Four digits (Refer to ｢Instruction for lot number｣) 製造Lot番号 ： ４桁 （ロット解説番号表参照） 8）Manufacture (English) ： Taiyo Yuden Co., Ltd. 9）Country of manufacture ： Made in Japan 10）Taiwan type approval qualification ID ： ************* 台湾電波法認証ID ： ************* 11）JATE qualification number ： *********** JATE 認証番号 ： *********** 3) 6) 7) 8) 9) 10) 1) 5) 2) 4) 2.4FH1 R *********** 太陽誘電株式会社 EYSFDCSXX Taiyo Yuden Co., Ltd. Made in Japan **** 型式: EYXFDCS T *********** ************* 11) ②Barcode label indication description バーコードラベル表示内容 1）FCC ID ： RYYEYXFDC 2）Canada ID ： 4389A-EYXFDC 3）BD address number ： ０００３７Ａ◇◇◇◇◇◇ (Refer to ｢Instruction for lot number｣) BDアドレス番号 ： ０００３７Ａ◇◇◇◇◇◇（ロット番号解説書参照） 4) Taiyo Yuden product name ： P/N : EYSFDCSXX 5) R&TTE logo mark ： Specified logo mark (番号は認証番号に変更、現在は仮番号とし て、0560を表記) ETSIロゴマーク ： 規定ロゴマーク (番号は認証番号に変更、現在は仮番号として、 0560を表記)) 6) Manufacture (English) ： Taiyo Yuden Co., Ltd. Made in Japan Unit:mm 5.45 29.0 5.2 13.8 R2.9 00037A00A000 FCC ID : RYYEYXFDC IC : 4389A-EYXFDC Taiyo Yuden Co., Ltd. Made in Japan P/N : EYSFDCSXX 1) 2) 4) 3) 6) 5)

Taiyo Yuden Co., Ltd. C C o o m m p p l l e e t t e e C C l l a a s s s s 2 2 B B l l u u e e t t o o o o t t h h M M o o d d u u l l e e Taiyo Yuden Co., Ltd. EYSFDCSXX_ Internal Photo 1.FRONT VIEW 2.REAR VIEW

Radio Test Report: 99626831 Applicant: Taiyo Yuden Co. Ltd. 5607-2 Nakamuroda Harunamachi 370-3347 Gunma-Gun Gunma, Japan Equipment Under Test: EYSFDCSXX FCC ID: RYYEYXFDC In Accordance With: FCC Part 15, Subpart C, 15.247 (10-1-03 edition) Frequency Hopping Transmitters Tested By: Telefication bv Edisonstraat 12a 6902 PK Zevenaar The Netherlands FCC designation number: BE0003 Tested by: _________________________________ ing. S. J. van Spijker, Test engineer Reviewed by: _________________________________ ing P. A. Suringa, Senior test engineer Radio/EMC Authorized by: _________________________________ J.P. van de Poll, Co-ordinator Test Group Date: 26 April 2005 Total Number of Pages: 70 Report number : 99626831 Page 2 of 70 Table of Contents Section 1. Summary of Test Results ....................................................................................... 3 Section 2. Equipment Under Test (E.U.T.)............................................................................. 5 Section 3. Channel Separation ................................................................................................ 8 Section 4. Pseudorandom Hopping Algorithm ..................................................................... 11 Section 5. Time of Occupancy.............................................................................................. 12 Section 6. Occupied Bandwidth............................................................................................ 13 Section 7. Peak Power Output .............................................................................................. 19 Section 8. Spurious Emissions (Antenna conducted) ........................................................... 20 Section 9. Spurious Emissions (Radiated, exploratory) ....................................................... 26 Section 10. Spurious Emissions (Radiated, compliance) ....................................................... 30 Section 11. Spurious Emissions (Restricted bands Radiated) ................................................ 42 Section 12. Test Equipment List ............................................................................................. 63 Annex A Test details............................................................................................................. 64 Report number : 99626831 Page 3 of 70 Section 1. Summary of Test Results Manufacturer: Taiyo Yuden Co. Ltd. 5607-2 Nakamuroda Harunamachi Gunma-Gun Gunma Japan Model No.: EYSFDCSXX Serial No.: 00037a002e55 Date Received In Laboratory: 17 March 2005 These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 15, Subpart C, Paragraph 15.247 for Frequency Hopping Spread Spectrum devices. Tests were conducted in accordance with Public Notice DA 00-705, issued in March 2000. New Submission Production Unit Class II Permissive Change Pre-Production Unit Family Listing THIS TEST REPORT RELATES ONLY TO THE ITEM(S) TESTED. THE FOLLOWING DEVIATIONS FROM, ADDITIONS TO, OR EXCLUSIONS FROM THE TEST SPECIFICATIONS HAVE BEEN MADE. See “ Summary of Test Data”. Telefication bv authorizes the above named company to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Telefication bv accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. Telefication complies with the accreditation criteria for test laboratories as laid down in ISO/IEC 17025:1999. The accreditation covers the quality system of the laboratory as well as the specific activities as described in the authorized annex bearing the accreditation number L021 and is granted on 30 November 1990 by the Dutch Council For Accreditation (RvA: Raad voor Accreditatie). Report number : 99626831 Page 4 of 70 Summary Of Test Data NAME OF TEST PARA. NO. SPEC. MEAS. RESULT Channel Separation 15.247(a)(1) Greater than 25 kHz or 20 dB bandwidth 1 MHz PASS Pseudorandom Hopping Algorithm 15.247(a)(1) Bluetooth -- PASS Time of Occupancy 15.247(a)(1)(ii) ≤ 0.4 sec in 30 sec 303 msec PASS GFSK: 0.933 MHz N.A. π/4-DPSK: 1.217 MHz N.A. 20 dB Occupied Bandwidth 15.247(a)(1) N.A. 8-DPSK: 1.263 MHz N.A. GFSK: 1.1 mW PASS π/4-DPSK: 0.83 mW PASS Peak Power Output 15.247(b) 1 Watt 8-DPSK: 0.86 mW PASS Spurious Emissions (Antenna Conducted) 15.247(c) ≤ -20 dBc ≤ -48.17 dBc PASS Spurious emissions (Radiated) 15.209 Table 15.209(a) ≤ 39.0 dBμV/m PASS Spurious Emissions in restricted bands as defined in 15.205(a) (Radiated) 15.247(c) Table 15.209(a) 45.2 dBμV/m (Av) 63.9 dBμV/m (Pk) PASS Test Conditions: Indoor Temperature: 24 °C Humidity: 44 % Test locations: • Telefication bv, Zevenaar Note: To configure the EUT during testing, Bluetest 1.20 was used. With this tools the transmit power and modulation was set. The following settings were used: Mode Modulation Power setting Packet type Packet size 1 Mbit/s GFSK 54 15 339 2 Mbit/s π/4-DPSK 95 30 679 3 Mbit/s 8-DPSK 95 31 1021 Report number : 99626831 Page 5 of 70 Section 2. Equipment Under Test (E.U.T.) General Equipment Information Frequency Band: 2400 – 2483.5 MHz Rated power: +2 dBm (conducted) Number of Channels: 79 Channel Spacing: 1 MHz Emissions Designator: GFSK 946KF1D π/4-DPSK 1M24G1D 8-DPSK 1M27G1D Report number : 99626831 Page 6 of 70 Description of Modification for Modification Filing Not applicable Family List Rational Not applicable Report number : 99626831 Page 7 of 70 Description of EUT The EYSFDCSXX is a spread spectrum frequency hopping transceiver and is designated for operation in the frequency band of 2400-2483.5 MHz. The equipment is a Bluetooth transceiver module, which supports enhanced data rates (EDR) These enhanced data rated use a different type of modulation than normal Bluetooth. F…

Text truncated - open the document above for the full version.