RYYWYAAAVDWireless LAN + Bluetooth Module

Bluetooth® + Wireless LAN Module IEEE802.11b/g/n Bluetooth® 3.0 User Manual ユーザーマニュアル Part Number 品名 WYAAAVDXA－1 Please read this manual before the operation. Leer el manual antes de instalar u operar 本製品をご使用する前に、このマニュアルをお読み下さい。 Please note that this user manual should not be provided to end-users. このマニュアルはエンドユーザには提出しないで下さい。 DATE：Jul. 05, 2012 Submitted by TAIYO YUDEN CO., LTD. 太陽誘電株式会社 APPROVEDCHECKER DRAWN DESIGNE User Manual ユーザーマニュアル 2012.07.05 Document constituent list 構成書類リスト Control name 書類名 Control No. 書類番号 Document page 構成ページ General items 一般事項書 ＨＤ－ＡＧ－Ａ１１１３６１ １／5 ～ 5／5 Absolute maximum ratings 絶対最大定格書 ＨＤ－ＡＭ－Ａ１１１３６１ １／１ Electrical characteristics 電気的特性書 ＨＤ－ＡＥ－Ａ１１１３６１ １／３ ～ ３／３ Electrical characteristics 電気的特性書 ＨＤ－ＡＥ－Ｂ１１１３６１ １／４ ～ ４／４ Outline･Appearance 外形・外観図 ＨＤ－ＡＤ－Ａ１１１３６１ １／２ ～ ２／２ Pin layout ピンレイアウト図 ＨＤ－ＢＡ－Ａ１１１３６１ １／１ Handling Precaution 取扱注意要領 ＨＱ－ＢＡ－Ａ１１１３６１ １／2 ～ 2／2 Rev. record 改訂履歴 28-Jun.-2012> Ver.1.0 Initial Release 2012.06.28> Ver1.0 初版発行 28-Jul.-2012> Ver1.1 Change General items 2012.07.05> Ver1.1 一般事項書 修正 TAIYO YUDEN Co.,Ltd. APPROVED CHECKED DRAWN DESIGNED Control No. ＨＤ－ＡＧ－ Ａ１１１３６１ （１／５） Control name General items 一般事項書 2012.07.05 （１）Scope 適用 This specification (“Specification”) applies to the hybrid IC “WYAAAVDXA-1” for use Wireless LAN and Bluetooth® Module (“Product”) manufactured by TAIYO YUDEN Co.,Ltd. (“TAIYO YUDEN”) 本仕様書は、太陽誘電株式会社(“弊社”)により製造されるWireless LAN、Bluetooth® 用ハイブリッドIC “WYAAAVDXA-1” (“本製品”)に適用する。 （２）Description 内 容 ① Part Number : WYAAAVDXA-1 品 名 : WYAAAVDXA-1 ② Function : Radio frequency transceiver Module (IEEE802.11bgn standard conformity) (Bluetooth®3.0 standard conformity) 機 能 : 無線通信モジュール（IEEE802.11bgn 規格準拠） (Bluetooth®3.0規格準拠) ③ Application : DSC 用 途 : デジタルスチルカメラ ④ Structure : Hybrid IC loaded with silicon and Gallium arsenide monolithic semiconductor 構 造 : ガリウムヒ素 モノリシック半導体を用いた混成集積回路 Containment of hazardous substance in this Product *This product conforms to RoHS Directive (2002/95/EC). 本製品内の環境物質含有 *RoHS指令(2002/95/EC)に適合しています。 ⑤ Terminal : Data input-output : 19pin FPC Connector 503566-1900 (MOLEX) 電 極 : データ入出力 : 19ピンFPCコネクタ 503566-1900 (MOLEX) b. Instruction for Use (CAUTION) 使用上の注意事項 i) Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 'La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada” この機器の操作は、以下 2 つの条件の対象となります：(1) 機器や製品は、有害な妨害を起こさないこ と。(2) 機器や製品は、意図しない操作を引き起こすものも含んだいかなる妨害をも受け入れること。 ii) Because Product is not designed for radiation durability, please refrain from exposing Product to radiation in the use. 本製品は、耐放射線設計をしておりませんので、放射線のストレスを受ける環境下での使用は避 けて下さい。 iii) Communication between this Product and other might not be established nor maintained depending upon radio environment or operating condition of this Product and other products with wireless technology. 本製品と本製品又は他製品の通信は、周囲の電波環境及び機器環境により確立又は維持し難くな ることがあります。 TAIYO YUDEN Co.,Ltd. APPROVED CHECKED DRAWN DESIGNED Control No. ＨＤ－ＡＧ－ Ａ１１１３６１ （２／５） Control name General items 一般事項書 2012.07.05 iv) This Product mentioned in this Specification is manufactured for use in DSC. Before using this product in any special equipment (such as medical equipment, space equipment, air craft, disaster prevention equipment), where higher safety and reliability are duly required, the applicability suitability, or fitness for particular purpose of this Product must be fully evaluated by the customer at its sole risk to ensure correct and safety operation of those special equipments. Also, evaluation of the safety function of this Product even for use in general electronics equipment shall be thoroughly made and when necessary, a protective circuit shall be added in design stage, all at the customer’s sole risk. 本仕様書に記載されている本製品は、DSC 用として製造されております。従って、高度の安全性 や信頼性が求められる医療用機器、宇宙用機器、あるいは防災機器等にお使いになるときには、 本製品の適用可能性、相応性、特定目的に対する適合性をお客様の独自の責任で十分に評価、検 討され、御判断下さい。 又、一般機器において御使用になる場合にも、お客様の独自の責任で十分な安全性評価を実施さ れ、必要に応じて設計時に保護回路等を追加してください。 v) Japan Regulatory Information 日本規制情報 This product with a specific antenna is a radio system approved for Type Approval. Please follow the instructions below on designing your product. 本製品は、特定アンテナとの組み合わせにおいて工事設計認証を受けた無線設備です。 御社製品に搭載される場合、下記内容を遵守願います。 a) Please notify clearly below sentences, on your product or in the product manual. 御社製品あるいはマニュアルに下記文言を明示願います。 This product has a radio system which was approved as a radio station in a low power data communication system based on the Radio Law. Name of the radio system: 001-A00130 本製品には、電波法に基づく小電力データ通信システムの無線局として、工事設計認証を受けた無 線設備を内蔵しています。 無線設備名：001-A00130 b) Please design your set structure in which this module can be easily attached and taken off. セット搭載方法は本モジュールを容易に脱着できる構造として下さい。 c) This module is certified by Type Approval as the device which has SDIO Interface. Please do not use other purposes except that of certified. Please contact TAIYO YUDEN for more details of purposes of this product. 本モジュールの用途は、SDIOインターフェイスを持つ装置として工事設計認証を受けています。 規定されている用途以外の機器へは使用しないで下さい。 用途の詳細につきましては、弊社までお問い合わせ願います。 vi) Canada Regulatory Information カナダ規制情報 a) This device complies with Industry Canada licence-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est…

Text truncated - open the document above for the full version.

WYAAAVDXA-1 External Photo WYAAAVDXA-1 External PhotoWYAAAVDXA-1 External Photo WYAAAVDXA-1 External Photo Confidential Upper Side Upper SideUpper Side Upper Side Lower Side Lower SideLower Side Lower Side Taiyo Yuden Co.,Ltd.

TAIYO YUDEN Co.,Ltd. Control No. Control name APPROVED CHECKED DRAWN DESIGNED Label Design Label Material：PET / Label color ：White / Printing ：Black 材質 ：PET / ラベル色 ：白 / 印字 ：黒 Indication Label description 1) Model ：WYAAAVDXA-1 2) IC ID ：4389B-WYAAAVD 3) FCC ID ：RYYWYAAAVD 4) Country of manufacture ：Made in CHINA 4) 1) 3) 2)

WYAAAVDXA-1 Internal Photo WYAAAVDXA-1 Internal PhotoWYAAAVDXA-1 Internal Photo WYAAAVDXA-1 Internal Photo Confidential Upper Side Upper SideUpper Side Upper Side Lower Side Lower SideLower Side Lower Side Taiyo Yuden Co.,Ltd.

Attachment 1 – System Validation Plots JAPAN QUALITY ASSURANCE ORGANIZATION Date/Time: 2012/06/07 11:01:45 Test Laboratory: JAPAN QUALITY ASSURANCE ORGANIZATION System Validation (Body 2450 MHz) DUT: Dipole 2450 MHz; Type: D2450V2; Serial: 714 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: MSL2450 Medium parameters used: f = 2450 MHz; σ = 1.95 mho/m; ε r = 52.1; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY4 (High Precision Assessment) DASY4 Configuration: zProbe: EX3DV4 - SN3808; ConvF(6.85, 6.85, 6.85); Calibrated: 2011/09/02 zSensor-Surface: 2mm (Mechanical Surface Detection) zElectronics: DAE4 Sn508; Calibrated: 2011/11/14 zPhantom: SAM 1200; Type: QD 000 P40 CA; Serial: 1200 zMeasurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 184 Antenna Input Power 250 mW/Area Scan (9x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 20.1 mW/g Antenna Input Power 250 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 103.7 V/m; Power Drift = -0.006 dB Peak SAR (extrapolated) = 27.5 W/kg SAR(1 g) = 13.3 mW/g; SAR(10 g) = 6.19 mW/g Maximum value of SAR (measured) = 20.5 mW/g 0 dB = 20.5mW/g JAPAN QUALITY ASSURANCE ORGANIZATION Attachment 2 – SAR Test Plots JAPAN QUALITY ASSURANCE ORGANIZATION Date/Time: 2012/06/07 14:12:42 Test Laboratory: JAPAN QUALITY ASSURANCE ORGANIZATION Body 6ch / 802.11b 1Mbps DUT: Digital Still Camera; Type: M81; Serial: 1013 Communication System: WLAN; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.93 mho/m; ε r = 52.1; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY4 (High Precision Assessment) DASY4 Configuration: zProbe: EX3DV4 - SN3808; ConvF(6.85, 6.85, 6.85); Calibrated: 2011/09/02 zSensor-Surface: 2mm (Mechanical Surface Detection) zElectronics: DAE4 Sn508; Calibrated: 2011/11/14 zPhantom: SAM 1200; Type: QD 000 P40 CA; Serial: 1200 zMeasurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 184 Top Edge/Area Scan (7x13x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.129 mW/g Top Edge/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.98 V/m; Power Drift = -0.034 dB Peak SAR (extrapolated) = 0.187 W/kg SAR(1 g) = 0.089 mW/g; SAR(10 g) = 0.044 mW/g Maximum value of SAR (measured) = 0.133 mW/g 0 dB = 0.133mW/g JAPAN QUALITY ASSURANCE ORGANIZATION Date/Time: 2012/06/07 14:39:02 Test Laboratory: JAPAN QUALITY ASSURANCE ORGANIZATION Body 6ch / 802.11b 1Mbps DUT: Digital Camera; Type: M81; Serial: 1013 Communication System: WLAN; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.93 mho/m; ε r = 52.1; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY4 (High Precision Assessment) DASY4 Configuration: zProbe: EX3DV4 - SN3808; ConvF(6.85, 6.85, 6.85); Calibrated: 2011/09/02 zSensor-Surface: 2mm (Mechanical Surface Detection) zElectronics: DAE4 Sn508; Calibrated: 2011/11/14 zPhantom: SAM 1200; Type: QD 000 P40 CA; Serial: 1200 zMeasurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 184 Bottom Edge/Area Scan (7x13x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.235 mW/g Bottom Edge/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.18 V/m; Power Drift = 0.043 dB Peak SAR (extrapolated) = 0.320 W/kg SAR(1 g) = 0.158 mW/g; SAR(10 g) = 0.074 mW/g Maximum value of SAR (measured) = 0.231 mW/g 0 dB = 0.231mW/g JAPAN QUALITY ASSURANCE ORGANIZATION Date/Time: 2012/06/07 13:03:34 Test Laboratory: JAPAN QUALITY ASSURANCE ORGANIZATION Body 6ch / 802.11b 1Mbps DUT: Digital Camera; Type: M81; Serial: 1013 Communication System: WLAN; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.93 mho/m; ε r = 52.1; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY4 (High Precision Assessment) DASY4 Configuration: zProbe: EX3DV4 - SN3808; ConvF(6.85, 6.85, 6.85); Calibrated: 2011/09/02 zSensor-Surface: 2mm (Mechanical Surface Detection) zElectronics: DAE4 Sn508; Calibrated: 2011/11/14 zPhantom: SAM 1200; Type: QD 000 P40 CA; Serial: 1200 zMeasurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 184 Left Edge/Area Scan (7x9x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.094 mW/g Left Edge/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.99 V/m; Power Drift = 0.013 dB Peak SAR (extrapolated) = 0.102 W/kg SAR(1 g) = 0.036 mW/g; SAR(10 g) = 0.015 mW/g Maximum value of SAR (measured) = 0.060 mW/g 0 dB = 0.060mW/g JAPAN QUALITY ASSURANCE ORGANIZATION Date/Time: 2012/06/07 17:14:33 Test Laboratory: JAPAN QUALITY ASSURANCE ORGANIZATION Body 1ch / 802.11b 1Mbps DUT: Digital Camera; Type: M81; Serial: 1013 Communication System: WLAN; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.89 mho/m; ε r = 52.2; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY4 (High Precision Assessment) DASY4 Configuration: zProbe: EX3DV4 - SN3808; ConvF(6.85, 6.85, 6.85); Calibrated: 2011/09/02 zSensor-Surface: 2mm (Mechanical Surface Detection) zElectronics: DAE4 Sn508; Calibrated: 2011/11/14 zPhantom: SAM 1200; Type: QD 000 P40 CA; Serial: 1200 zMeasurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 184 Right Edge/Area Scan (7x9x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.32 mW/g Right Edge/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 24.1 V/m; Power Drift = 0.018 dB Peak SAR (extrapolated) = 2.34 W/kg SAR(1 g) = 0.725 mW/g; SAR(10 g) = 0.263 mW/g Maximum value of SAR (measured) = 1.27 mW/g 0 dB = 1.27mW/g JAPAN QUALITY ASSURANCE ORGANIZATION Date/Time: 2012/06/07 13:41:41 Test Laboratory:…

Text truncated - open the document above for the full version.

JAPAN QUALITY ASSURANCE ORGANIZATION Page 1 of 24 Technical document No. 23163-1201 JQA File No. : KL80120185 Issue Date : June 22, 2012 TEST REPORT (SAR EVALUATION) Applicant : SANYO Electric Co., Ltd. Address : 1-1 Sanyo-cho, Daito-shi, Osaka, 574-8534 Japan Products : Digital Camera Model No. : M81 * Serial No. : 1013 FCC ID : RYYWYAAAVD * Test Standard : FCC/OET Bulletin 65 Supplement C (Edition 01-01) Test Results : Passed Date of Test : June 7, 2012 * This product has the WLAN & Bluetooth combo module “WYAAAVDXA-1”. FCC ID “RYYWYAAAVD” is given in this module. Kousei Shibata Manager Japan Quality Assurance Organization KITA-KANSAI Testing Center SAITO EMC Branch 7-3-10, Saito-asagi, Ibaraki-shi, Osaka 567-0085, Japan ● The measurement values stated in Test Report was made with traceable to National Institute of Advanced Industrial Science and Technology (AIST) of Japan, National Institute of Information and Communications Technology (NICT) of Japan , and Laboratory for EMF and Microwave Electronics at the Swiss Federal Institute of Technology (ETH) in Zürich, Switzerland. ● The applicable standard, testing condition and testing method which were used for the tests are based on the request of the applicant. ● The test results presented in this report relate only to the offered test sample. ● The contents of this test report cannot be used for the purposes, such as advertisement for consumers. ● This test report shall not be reproduced except in full without the written approval of JQA. ● VLAC does not approve, certify or warrant the product by this test report. VLAC-001-2 JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80120185 Issue Date : June 22, 2012 Model No. : M81 FCC ID : RYYWYAAAVD Standard : FCC/OET Bulletin 65 Supplement C (Edition 01-01) Page 2 of 24 Technical document No. 23163-1201 TABLE OF CONTENTS Page 1 Description of the Equipment Under Test...........................................................................................3 2 Summary of Test Results......................................................................................................................4 3 Test Procedure.......................................................................................................................................5 4 Test Location..........................................................................................................................................5 5 Recognition of Test Laboratory.............................................................................................................5 6 Measurement System Diagram............................................................................................................6 7 System Components..............................................................................................................................7 8 Measurement Process..........................................................................................................................11 9 Measurement Uncertainties...............................................................................................................12 10 Test Arrangement................................................................................................................................13 11 Tissue Verification...............................................................................................................................15 12 System Validation................................................................................................................................16 13 RF Output Power Measurements.......................................................................................................17 14 SAR Measurements.............................................................................................................................19 15 Test Setup Photographs......................................................................................................................20 16 Test Instruments.................................................................................................................................23 17 Appendix...............................................................................................................................................24 JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80120185 Issue Date : June 22, 2012 Model No. : M81 FCC ID : RYYWYAAAVD Standard : FCC/OET Bulletin 65 Supplement C (Edition 01-01) Page 3 of 24 Technical document No. 23163-1201 1 Description of the Equipment Under Test 1. Manufacturer : SANYO Electric Co., Ltd. 1-1 Sanyo-cho, Daito-shi, Osaka, 574-8534 Japan 2. Products : Digital Camera 3. Model No. : M81 ** 4. Serial No. : 1013 5. Product Type : Pre-production 6. Date of Manufacture : -- 7. Transmitting Frequency : 2412 MHz – 2462 MHz (WLAN 802.11b/g/n) 2402 MHz – 2480 MHz (Bluetooth) 8. Battery Option : Lithium-ion Battery (1050mAh) 9. Power Rating : 3.7VDC 10. EUT Grounding : None 11. Device Category : Portable Device (§2.1093) 12. Exposure Category : General Population/Uncontrolled Exposure 13. FCC Rule Part(s) : 15.247 14. EUT Authorization : Certification 15. Received Date of EUT : June 5, 2012 **) This product has the WLAN & Bluetooth combo module “WYAAAVDXA-1” made by TAIYO YUDEN. FCC ID : RYYWYAAAVD IC ID : 4389B-WYAAAVD JAPAN QUALITY ASSURANCE ORGANIZATION JQA File No. : KL80120185 Issue Date : June 22, 2012 Model No. : M81 FCC ID : RYYWYAAAVD Standard : FCC/OET Bulletin 65 Supplement C (Edition 01-01) Page 4 of 24 Technical document No. 23163-1201 2 Summary of Test Results Applied Standard : FCC/OET Bulletin 65 Supplement C (Edition 01-01) Evaluating Compliance with FCC Guidelines for Human Exposure to Radio- frequency Electromagnetic Fields Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions Band CH Freq. (MHz) Re…

Text truncated - open the document above for the full version.

Report No.: RF120518C19-1 1 of 61 Report Format Version 5.0.0 FCC TEST REPORT (BLUETOOTH) REPORT NO.: RF120518C19-1 MODEL NO.: WYAAAVDXA-1 FCC ID: RYYWYAAAVD RECEIVED: May 18, 2012 TESTED: May 25 ~ Jun. 19, 2012 ISSUED: Jun. 21, 2012 APPLICANT: TAIYO YUDEN CO., LTD. ADDRESS: 8-1 Sakae-cho, Takasaki-shi, Gunma, 370-8522, JAPAN ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120518C19-1 2 of 61 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD .............................................................................................................. 4 1. CERTIFICATION ........................................................................................................................... 5 1. SUMMARY OF TEST RESULTS .................................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 6 2. GENERAL INFORMATION ........................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................................... 9 3.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................................ 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................ 11 4. TEST TYPES AND RESULTS .................................................................................................... 12 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................................... 12 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................. 12 4.1.2 TEST INSTRUMENTS ................................................................................................................ 13 4.1.3 TEST PROCEDURES ................................................................................................................ 14 4.1.4 DEVIATION FROM TEST STANDARD ...................................................................................... 14 4.1.5 TEST SETUP .............................................................................................................................. 15 4.1.6 EUT OPERATING CONDITIONS ............................................................................................... 15 4.1.7 TEST RESULTS ......................................................................................................................... 16 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................................. 30 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................................... 30 4.2.2 TEST INSTRUMENTS ................................................................................................................ 30 4.2.3 TEST PROCEDURES ................................................................................................................ 31 4.2.4 DEVIATION FROM TEST STANDARD ...................................................................................... 31 4.2.5 TEST SETUP .............................................................................................................................. 32 4.2.6 EUT OPERATING CONDITIONS ............................................................................................... 32 4.2.7 TEST RESULTS ......................................................................................................................... 33 4.3 NUMBER OF HOPPING FREQUENCY USED .......................................................................... 35 4.3.1 LIMIT OF HOPPING FREQUENCY USED ................................................................................ 35 4.3.2 TEST SETUP ..........................................................................…

Text truncated - open the document above for the full version.

Report No.: RF120518C19 1 of 44 Report Format Version 5.0.0 FCC TEST REPORT (WLAN) REPORT NO.: RF120518C19 MODEL NO.: WYAAAVDXA-1 FCC ID: RYYWYAAAVD RECEIVED: May 18, 2012 TESTED: May 25 ~ Jun. 05, 2012 ISSUED: Jun. 21, 2012 APPLICANT: TAIYO YUDEN CO., LTD. ADDRESS: 8-1 Sakae-cho, Takasaki-shi, Gunma, 370-8522, JAPAN ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120518C19 2 of 44 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ......................................................................................... 4 1. CERTIFICATION ..................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 6 3. GENERAL INFORMATION ...................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ........................................................................ 7 3.2 DESCRIPTION OF TEST MODES .......................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .......................... 9 3.3 DESCRIPTION OF SUPPORT UNITS ................................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST .................................................... 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 12 4. TEST TYPES AND RESULTS ............................................................................... 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................ 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ............. 13 4.1.2 TEST INSTRUMENTS ........................................................................................... 14 4.1.3 TEST PROCEDURES ........................................................................................... 15 4.1.4 DEVIATION FROM TEST STANDARD ................................................................. 15 4.1.5 TEST SETUP ......................................................................................................... 16 4.1.6 EUT OPERATING CONDITIONS .......................................................................... 16 4.1.7 TEST RESULTS .................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................ 27 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................... 27 4.2.2 TEST INSTRUMENTS ........................................................................................... 27 4.2.3 TEST PROCEDURES ........................................................................................... 28 4.2.4 DEVIATION FROM TEST STANDARD ................................................................. 28 4.2.5 TEST SETUP ......................................................................................................... 28 4.2.6 EUT OPERATING CONDITIONS .......................................................................... 28 4.2.7 TEST RESULTS .................................................................................................... 29 4.3 6dB BANDWIDTH MEASUREMENT ..................................................................... 31 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT .…

Text truncated - open the document above for the full version.