RZSMSBT01Stowaway Travel Bluetooth Mouse

MSBT01 USER’S MANU Welcome Thank you for purchasing this BLUETOOTH Wireless Optical Mouse. Utilizing the latest wireless technology. This mouse can work from any directions or angles even when objects hinder between your mouse & your BLUETOOTH enabled P.C., You can locate the device freely and enjoy its convenience. And the working range between the mouse and your P.C. are 10 meters. Install your BLUETOOTH wireless mouse Hardware Installation Installing batteries 1. Remove the battery cover from the bottom of your mouse 2. Insert two AAA Alkaline batteries into the battery compartment. 3. Replace the cover carefully. Once the battery is placed correctly in the mouse, the optical LED located at the mouse bottom will light up. PAIRING WITH YOUR P.C. (or BLUETOOTH Dongle) Prior to using your BLUETOOTH mouse for the first time, you MUST pair it with another BLUETOOTH device, such as a BLUETOOTH enabled P.C.. The Bluetooth connection between the mouse and your P.C. can be established by setting up a paired link. With a paired link, the P.C. remembers the mouse’s ID, and these 2 items are then ‘paired’ together – eliminating the need to repeat the set up process with future use. Only paired devices can utilize all the functions of the mouse. The information below describes pairing instructions for a typical device. For specific instructions, refer to your P.C. user guide. 1. Press the underneath button of the mouse, then the green LED is turned on, and mouse is ready to be pairing with your P.C. 2. Select the BLUETOOTH function on your P.C., and following the instructions of user’s guide to pair the mouse with your P.C.. 3. Once the mouse has been paired with your P.C., then the green LED of the mouse will be turned off, and then the mouse is ready to be used with your P.C.. Power on-off function This ON/OFF function is designed to save battery life. When mouse is not in use, you may turn the battery switch off Important Note z Please avoid your BLUETOOTH optical mouse to work on a metal surface. Metals such as iron, aluminum or copper shield the radio frequency transmission and may slow down the response of the mouse of cause the mouse to fail temporarily. z This BLUETOOTH mouse will enter power saving mode automatically and if you don’t move the mouse for over 10 minutes then you may have to move the mouse a little bit to re-start working z Never use the BLUETOOTH mouse on a glass or mirrored surface z Always use Alkaline batteries ONLY. Do not mix used and new batteries in one mouse. z Using light color mouse pad is recommended. FCC Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Notice: Any changes or modification not expressly approved by the party responsible could void the user’s authority to operate the device.

DOC-FCC007-2 2/19/04 Agent Authorization Letter Please produce a letter on your company letterhead with the following information. The letter must be submitted in one of the electronic formats listed previously. attn: Reviewing Engineer Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize MET Laboratories, Inc. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely,

Chris Harvey From: [email protected] Sent: Monday, November 01, 2004 7:39 PM To: Chris Harvey; [email protected] Cc: [email protected]; [email protected] Subject: RE: Additional Information Needed Think Outside FCC ID: RZSMSBT01 MT#16393 Page 1 of 6 11/2/2004 Chris, Please find enclosed user manual for Think Outside. Our customer is really anxious to have the FCC Grant and IC certificate. Could you give me some information about these project status? Thank you for your consideration upon this matter! Regards, Elisa Chen --- Elisa Chen E&E Lab. of SGS Taiwan Ltd. E-Mail: [email protected] TEL: +886 2 2299 3279 ext. 1161 FAX: +886 2 2298 2698 No. 134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan Elisa, you are correct about the manual. The Archer Manual was correct. The Think Outside Manual does not contain the required information for FCC. Best regards, Chris Harvey -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Monday, November 01, 2004 3:53 AM To: Chris Harvey; [email protected] Cc: [email protected]; [email protected] Subject: RE: Additional Information Needed Think Outside FCC ID: RZSMSBT01 MT#16393 Chris Harvey <[email protected]> 2004/11/01 09:56 PM To: [email protected], [email protected] cc: [email protected], [email protected] Subject: RE: Additional Information Needed Think Outside FCC ID: RZSMSBT01 MT#16393 Chris, Please find attached module schematic for these 2 applicants. (Think Outside & ARCHER WIRELESS). As to the manual of the original request, I don't think there is any problem with it since it is differ form the 2nd one. I believe that you only ask manual of the 2nd project. Could you check it for me? Thank you very much! Regards, Elisa Chen --- Elisa Chen E&E Lab. of SGS Taiwan Ltd. E-Mail: [email protected] TEL: +886 2 2299 3279 ext. 1161 FAX: +886 2 2298 2698 No. 134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan Elisa, Thank you for the Bluetooth declarations for both applications. We will associate these documents with these 2 applications. Please note that we are still waiting for the schematic and revised manual per the original request. Best regards, Chris Harvey -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Friday, October 29, 2004 4:22 AM To: Chris Harvey; [email protected] Cc: [email protected]; [email protected] Subject: RE: Additional Information Needed Think Outside FCC ID: RZSMSBT01 MT#16393 Chris, Please find attached Bluetooth Declarations for Think Outside (FCC ID: RZSMSBT01) and ARCHER WIRELESS (RSQ-200BT). I am still waiting for the module schematic of our customer. I will submit to you once I get the schematic. Thank you for your consideration upon this matter! Chris Harvey <[email protected]> 2004/10/29 09:13 PM To: [email protected] cc: 'Marianne Bosley' <[email protected]> Subject: RE: Additional Information Needed Think Outside FCC ID: RZSMSBT01 MT#16393 Page 2 of 6 11/2/2004 Regards, Elisa Chen --- Elisa Chen E&E Lab. of SGS Taiwan Ltd. E-Mail: [email protected] TEL: +886 2 2299 3279 ext. 1161 FAX: +886 2 2298 2698 No. 134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan Elisa, The important thing here is that this device comply with all of the applicable FCC Rules. By having a device comply with the Bluetooth requirements the device meets the requirements I listed in the original request. This is true because in order to meet the Bluetooth Specification, the device must meet these requirements. If this device meets the Bluetooth Specification, a statement that it meets the Bluetooth Specification is all that would be needed. If it does not meet the Bluetooth Specification then I must have an exhibit stating that this EUT meets the following items of 15.247(a)(1), (g) and (h): ______Is the hopping sequence pseudorandom, based on the technical description? (See the definition of a Frequency Hopping System) ______Is each channel used equally on average, based on the technical description? ______Does the associated system receiver have a compliant input bandwidth, based on the measured 20 dB emission bandwidth? ______Does the associated system receiver have the ability to hop in synchronization with the transmitter, based on the technical description? ______Does the design of the frequency hopping system allow it to comply with all pertinent requirements when presented with a lengthy data stream? ______Does the frequency hopping system comply with the non-coordination requirement? A declaration for compliance with each of the requirements above should be sufficient, with the ability to provide evidence to the FCC as needed. I hope this clarifies this request. Please contact me if you have any further questions. Best regards, Chris Harvey -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Tuesday, October 26, 2004 12:04 AM To: Chris Harvey Cc: [email protected] Chris Harvey <[email protected]> 2004/10/27 05:53 AM To: [email protected] cc: [email protected], 'Marianne Bosley' <[email protected]> Subject: RE: Additional Information Needed Think Outside FCC ID: RZSMSBT01 MT#16393 Page 3 of 6 11/2/2004 Subject: RE: Additional Information Needed Think Outside FCC ID: RZSMSBT01 Chris, Thank you for your mail. I am asking those documents from our customer. I will submit to you immediately. I have one more question about the Bluetooth compliance part. Our customer doesn't do the BQB certification. But this is a Bluetooth device. Under this situation, can we just ask our customer to provide a declaration? Or what is the acceptable way for you? Please give me some information. Thank you very much! Regards, Elisa Chen --- Elisa Chen E&E Lab. of SGS Taiwan Ltd. E-Mail: [email protected] TEL: +886 2 2299 3279 ext. 1161 FAX: +886 2 2298 2698 No. 134, Wu Kung Road, Wuku Industrial Zone, Taipei County, Taiwan Elisa, Thank you for the agent authorization lett…

Text truncated - open the document above for the full version.

REPORT NO: EF/2004/80012-02 ID: RZSMSBT01 DATE: Oct. 18, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA APPENDIX 2 EXTERNAL OF EUT REPORT NO: EF/2004/80012-02 ID: RZSMSBT01 DATE: Oct. 18, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Front View of EUT Back View of EUT

FCC ID LABEL FORMAT AND LOCATION Applicant: Think Outside Inc. FCC ID: RZSMSBT01 FCC ID: RZSMSBT01 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID LABEL AREA

REPORT NO: EF/2004/80012-02 ID: RZSMSBT01 DATE: Oct. 18, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA APPENDIX 3 INTERNAL OF EUT REPORT NO: EF/2004/80012-02 ID: RZSMSBT01 DATE: Oct. 18, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Open View of EUT Internal of EUT Antenna REPORT NO: EF/2004/80012-02 ID: RZSMSBT01 DATE: Oct. 18, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Internal of EUT

REPORT NO: EF/2004/80012-02 ID: RZSMSBT01 DATE: Oct. 18, 2004 Page: 1 of 51 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Product Name: Stowaway Travel Mouse Brand Name: Think Outside Model Name: MSBT01 FCC ID: RZSMSBT01 Report No.: EF/2004/80012-02 Issue Date: Oct. 18, 2004 FCC Rule Part: 15.247 Prepared for Think Outside Inc. 85 Saratoga Ave., Suite 200, Santa Clara, CA 95051, USA Prepared by SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei County, Taiwan. Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This document may be altered or revised by SGS Taiwan Ltd. personnel only, and shall be noted in the revision section of the document. REPORT NO: EF/2004/80012-02 ID: RZSMSBT01 DATE: Oct. 18, 2004 Page: 2 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA VERIFICATION OF COMPLIANCE Applicant: Think Outside Inc. 85 Saratoga Ave., Suite 200, Santa Clara, CA 95051, USA Equipment Under Test: Stowaway Travel Mouse Brand Name: N/A FCC ID Number: RZSMSBT01 Model No.: MSBT01 Model Difference: N/A File Number: EF/2004/80012-02 Date of test: Sep. 20, 2004 ~ Sep. 27, 2004 Date of EUT Received: Sep. 17, 2004 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. The test data, data evaluation, test proce- dures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2001) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247 The test results of this report relate only to the tested sample identified in this report. Test By: Date Sep. 29, 2004 Alex Hsieh Approved By Date Sep. 29, 2004 Vincent Su REPORT NO: EF/2004/80012-02 ID: RZSMSBT01 DATE: Oct. 18, 2004 Page: 3 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Table of Contents 1. GENERAL INFORMATION .........................................................................................................6 1.1. Product Description ............................................................................................................................6 1.2. Related Submittal(s) / Grant (s) ..........................................................................................................6 1.3. Test Methodology ...............................................................................................................................6 1.4. Test Facility.........................................................................................................................................6 1.5. Special Accessories .............................................................................................................................6 1.6. Equipment Modifications....................................................................................................................6 2. SYSTEM TEST CONFIGURATION ............................................................................................7 2.1. EUT Configuration .............................................................................................................................7 2.2. EUT Exercise ......................................................................................................................................7 2.3. Test Procedure.....................................................................................................................................7 2.4. Configuration of Tested System..........................................................................................................8 3. SUMMARY OF TEST RESULTS .................................................................................................9 4. DESCRIPTION OF TEST MODES ..............................................................................................9 5. CONDUCTED EMISSION TEST (Not applicable for this product) .......................................10 5.1. Standard Applicable ..........................................................................................................................10 5.2. EUT Setup.........................................................................................................................................10 5.3. Measurement Procedure....................................................................................................................10 5.4. Measurement Equipment Used: ........................................................................................................11 5.5. Measurement Result..........................................................................................................................11 6. PEAK OUTPUT POWER MEASUREMENT............................................................................12 6.1. Standard Applicable ..................................................................…

Text truncated - open the document above for the full version.

REPORT NO: EF/2004/80012-02 ID: RZSMSBT01 DATE: Oct. 18, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA APPENDIX 1 PHOTOGRPHS OF SET UP REPORT NO: EF/2004/80012-02 ID: RZSMSBT01 DATE: Oct. 18, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Radiated Emission Set up Photos