RZSMSBT01-1Bluetooth Wireless Mouse

Think Outside, Inc.

Click to zoom

Application Details

Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Date of Grant: Nov 23, 2005
Application Purpose: Original Equipment
Date of Application: Nov 23, 2005
Equipment Note: Bluetooth Wireless Mouse
Frequency Range: 2402.00000000 - 2480.00000000
Company: Think Outside, Inc.
Country: United States

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

MSBT01 USER’S MANU Welcome Thank you for purchasing this BLUETOOTH Wireless Optical Mouse. Utilizing the latest wireless technology. This mouse can work from any directions or angles even when objects hinder between your mouse & your BLUETOOTH enabled P.C., You can locate the device freely and enjoy its convenience. And the working range between the mouse and your P.C. are 10 meters. Install your BLUETOOTH wireless mouse Hardware Installation Installing batteries 1. Remove the battery cover from the bottom of your mouse 2. Insert two AAA Alkaline batteries into the battery compartment. 3. Replace the cover carefully. Once the battery is placed correctly in the mouse, the optical LED located at the mouse bottom will light up. PAIRING WITH YOUR P.C. (or BLUETOOTH Dongle) Prior to using your BLUETOOTH mouse for the first time, you MUST pair it with another BLUETOOTH device, such as a BLUETOOTH enabled P.C.. The Bluetooth connection between the mouse and your P.C. can be established by setting up a paired link. With a paired link, the P.C. remembers the mouse’s ID, and these 2 items are then ‘paired’ together – eliminating the need to repeat the set up process with future use. Only paired devices can utilize all the functions of the mouse. The information below describes pairing instructions for a typical device. For specific instructions, refer to your P.C. user guide. 1. Press the underneath button of the mouse, then the green LED is turned on, and mouse is ready to be pairing with your P.C. 2. Select the BLUETOOTH function on your P.C., and following the instructions of user’s guide to pair the mouse with your P.C.. 3. Once the mouse has been paired with your P.C., then the green LED of the mouse will be turned off, and then the mouse is ready to be used with your P.C.. Power on-off function This ON/OFF function is designed to save battery life. When mouse is not in use, you may turn the battery switch off Important Note z Please avoid your BLUETOOTH optical mouse to work on a metal surface. Metals such as iron, aluminum or copper shield the radio frequency transmission and may slow down the response of the mouse of cause the mouse to fail temporarily. z This BLUETOOTH mouse will enter power saving mode automatically and if you don’t move the mouse for over 10 minutes then you may have to move the mouse a little bit to re-start working z Never use the BLUETOOTH mouse on a glass or mirrored surface z Always use Alkaline batteries ONLY. Do not mix used and new batteries in one mouse. z Using light color mouse pad is recommended. Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Cover Letter(s)

THIS MUST BE SIGNED BY THE APPLICANT AND SHOULD BE PLACED ON APPLICANTS LETTERHEAD ONLY IF AGENT IS SUBMITTING APPLICATION 020905 American TCB 6731 Whittier Ave. McLean, VA 22101 Acknowledgement of IC Listing Requirements By signing this document, we acknowledge that any information specified on the ATCB Application and Agreement Form for Industry Canada Certification Services provided with this application may be provided to Industry Canada. We acknowledge that this information may be posted in the Radio Equipment List (REL) on the Department's Web Site. Additionally, we understand that we must inform ATCB of any changes to the information submitted. We further acknowledge that the Certified product shall not be distributed, leased, or offered for sale in Canada prior to its listing on the Industry Canada Radio Equipment List (REL). We are aware that we may verify the status of this listing at the following web address: http://strategis.ic.gc.ca/cgi-bin/sc_mrksv/spectrum/reltelSearch/search.pl?lang=e&db=rel Dated this 22 of Nov., 2005. By: Victor Pan (Signature) (Print name) Title: The Principle Engineer email: [email protected] On behalf of: Think Outside Inc. (Company Name) Telephone: +1-408-551-4545 THIS MUST BE SIGNED BY THE APPLICANT AND SHOULD BE PLACED ON APPLICANTS LETTERHEAD ONLY IF AGENT IS SUBMITTING APPLICATION 020905 Attn: Director of Certification Authority to Act as Agent I appoint SGS Taiwan Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by American TCB, still resides with Think Outside Inc., 85 Saratoga Ave., Suite 200, Santa Clara, CA 95051, USA. Dated this 22 of Nov., 2005. Agency Agreement Expiration Date: (Typically 8-12 months) By: Victor Pan (Signature) (Print name) Title: The Principle Engineer On behalf of: Think Outside Inc. (Company Name) Telephone: +1-408-551-4545

Cover Letter(s)

Date: Nov. 22, 2005 Federal Communications Commission Authorization and Evaluation Division FCC ID: RZSMSBT01-1 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1. Schematics 2. Block Diagram 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _____________________________________ Victor Pan / The Principle Engineer Think Outside Inc.

External Photos

ID Label/Location Info

FCC ID / IC LABEL FORMAT AND LOCATION Applicant: Think Outside Inc. IC: 5031A-MSBT011 FCC ID: RZSMSBT01-1

Internal Photos

Report No.: ER/2005/A0016 IC: 5031A-MSBT011 Issue Date: Nov. 22, 2005 ID: RZSMSBT01-1 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw APPENDIX 3 INTERNAL OF EUT Report No.: ER/2005/A0016 IC: 5031A-MSBT011 Issue Date: Nov. 22, 2005 ID: RZSMSBT01-1 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Open View of EUT Internal of EUT – 1 Report No.: ER/2005/A0016 IC: 5031A-MSBT011 Issue Date: Nov. 22, 2005 ID: RZSMSBT01-1 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Internal of EUT – 2 Internal of EUT – 3 Antenna Report No.: ER/2005/A0016 IC: 5031A-MSBT011 Issue Date: Nov. 22, 2005 ID: RZSMSBT01-1 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Internal of EUT – 4

RF Exposure Info

Report No.: ER/2005/A0016 IC: 5031A-MSBT01-1 Issue Date: Nov. 22, 2005 ID: RZSMSBT01-1 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw RF EXPOSURE Standard Applicable According to §1.1307(b)(5), systems operating under the provisions of this section shall be oper- ated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. This is a Portable device. According to §1.1310 and §2.1093 RF exposure is calculated. Measurement Result This is a portable device and the Max peak output power is 2.32dBm (0.00171W) lower than low threshold 60/fGHz mW (24.48mW), d<2.5cm in general population category； The SAR measurement is not necessary.

Test Report

Report No.: ER/2005/A0016 IC: 5031A-MSBT011 Issue Date: Nov. 22, 2005 ID: RZSMSBT01-1 Page: 1 of 65 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT AND INDUSTRY CANADA RSS 210 OF Product Name: Stowaway Travel Mouse Brand Name: Think Outside Model Name: MSBT01 IC Number: ID Number: 5031A-MSBT011 RZSMSBT01-1 Report No.: ER/2005/A0016 Issue Date: Nov. 22, 2005 Rule Part: FCC §15.247, RSS 210, Section 6.2.2(o) Prepared for Think Outside Inc. 85 Saratoga Ave., Suite 200, Santa Clara, CA 95051, USA Prepared by SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei County, Taiwan. Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This document may be altered or revised by SGS Taiwan Ltd. personnel only, and shall be noted in the revision section of the document. Report No.: ER/2005/A0016 IC: 5031A-MSBT011 Issue Date: Nov. 22, 2005 ID: RZSMSBT01-1 Page: 2 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw VERIFICATION OF COMPLIANCE Applicant: Think Outside Inc. 85 Saratoga Ave., Suite 200, Santa Clara, CA 95051, USA Equipment Under Test: Stowaway Travel Mouse Brand Name: Think Outside IC Number: ID Number: 5031A-MSBT011 RZSMSBT01-1 Model No.: MSBT01 Model Difference: N/A File Number: ER/2005/A0016 Date of test: Oct. 31, 2005 ~ Nov. 17, 2005 Date of EUT Received: Oct. 30, 2005 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. The test data, data evaluation, test proce- dures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2003) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247 and IC RSS 210 section 6.2.2(o). The test results of this report relate only to the tested sample identified in this report. Test By: Date Nov. 22, 2005 Sky Wang Prepared By: Date Nov. 22, 2005 Elisa Chen Approved By: Date Nov. 22, 2005 Vincent Su Report No.: ER/2005/A0016 IC: 5031A-MSBT011 Issue Date: Nov. 22, 2005 ID: RZSMSBT01-1 Page: 3 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Version Version No. Date 00 Nov. 22, 2005 Report No.: ER/2005/A0016 IC: 5031A-MSBT011 Issue Date: Nov. 22, 2005 ID: RZSMSBT01-1 Page: 4 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Table of Contents 1. GENERAL INFORMATION .........................................................................................................7 1.1 Product Description ............................................................................................................................7 1.2 Related Submittal(s) / Grant (s) ..........................................................................................................7 1.3 Test Methodology ...............................................................................................................................7 1.4 Test Facility.........................................................................................................................................7 1.5 Accreditation and Listing....................................................................................................................7 1.6 Special Accessories .............................................................................................................................7 1.7 Equipment Modifications....................................................................................................................7 2. SYSTEM TEST CONFIGURATION ............................................................................................8 2.1 EUT Configuration .............................................................................................................................8 2.2 EUT Exercise ......................................................................................................................................8 2.3 Test Procedure.....................................................................................................................................8 2.4 Configuration of Tested System..........................................................................................................9 3. SUMMARY OF TEST RESULTS ...............................................................................................10 4. DESCRIPTION OF TEST MODES ............................................................................................10 5. CONDUCTED EMISSION TEST.................................................................…

Text truncated - open the document above for the full version.

Test Setup Photos