S4GEM358XETRX3581, ETRX3582, ETRX3585, ETRX3586, ETRX3587, ETRX3588, ETRX3581HR, ETRX3582HR, ETRX3585HR, ETRX3586HR, ETRX3587HR, ETRX3588HR

Telegesis TG-PM-0509-ETRX358x r5 ETRX358x and ETRX358xHR Product Manual ©2014 Telegesis (UK) Ltd ETRX358x Product Manual ETRX358x ZIGBEE ® MODULES PRODUCT M ANUAL ETRX358x ©2014 Telegesis (UK) Ltd - 2 - ETRX358x Product Manual Table of Contents 1 INTRODUCTION ................................................................................................................ 5 1.1 Hardware Description ...................................................................................................... 5 2 PRODUCT APPROVALS ................................................................................................... 6 2.1 FCC Approvals ................................................................................................................ 6 2.1.1 FCC Labelling Requirements ........................................................................................... 6 2.2 IC (Industry Canada) Approvals ....................................................................................... 7 2.2.1 IC Labelling Requirements .............................................................................................. 8 2.3 European Certification (ETSI) .......................................................................................... 8 2.4 Declarations of Conformity .............................................................................................. 9 2.5 IEEE 802.15.4 ................................................................................................................. 9 2.6 The ZigBee Protocol ...................................................................................................... 10 3 MODULE PINOUT ............................................................................................................ 11 4 HARDWARE DESCRIPTION ........................................................................................... 13 4.1 Hardware Interface ........................................................................................................ 13 5 FIRMWARE DESCRIPTION ............................................................................................. 14 5.1 Token Settings .............................................................................................................. 15 5.2 Custom Firmware .......................................................................................................... 15 6 ABSOLUTE MAXIMUM RATINGS ................................................................................... 16 6.1 Environmental Characteristics ....................................................................................... 16 6.2 Recommended Operating Conditions ............................................................................ 16 7 DC ELECTRICAL CHARACTERISTICS .......................................................................... 17 8 DIGITAL I/O SPECIFICATIONS ....................................................................................... 19 9 A/D CONVERTER CHARACTERISTICS ......................................................................... 20 10 AC ELECTRICAL CHARACTERISTICS .......................................................................... 20 10.1 TX Power Characteristics .............................................................................................. 22 10.2 Power Settings for Regulatory Compliance .................................................................... 24 11 PHYSICAL DIMENSIONS ................................................................................................ 25 12 RECOMMENDED REFLOW PROFILE ............................................................................ 26 13 PRODUCT LABEL DRAWING ......................................................................................... 27 14 RECOMMENDED FOOTPRINT ....................................................................................... 28 14.1 Recommended Placement ............................................................................................ 30 14.2 Example carrier board ................................................................................................... 32 15 RELIABILITY TESTS ....................................................................................................... 33 16 APPLICATION NOTES .................................................................................................... 33 16.1 Safety Precautions ........................................................................................................ 33 ETRX358x ©2014 Telegesis (UK) Ltd - 3 - ETRX358x Product Manual 16.2 Design Engineering Notes ............................................................................................. 33 16.3 Storage Conditions ........................................................................................................ 34 17 PACKAGING .................................................................................................................... 35 17.1 Embossed Tape ............................................................................................................ 35 17.2 Component Orientation .................................................................................................. 36 17.3 Reel Dimensions ........................................................................................................... 36 17.4 Packaging ...................................................................................................................... 37 18 ORDERING INFORMATION ............................................................................................ 38 19 TRADEMARKS ................................................................................................................ 38 20 DISCLAIMER ................................................................................................................... 39 21 ROHS DECLARATION ...................................…

Text truncated - open the document above for the full version.

ETRX358x Block Diagram 24MHz Crystal EM358x* I/O UART I / O programming 5 JTAG Vcc Vreg RESET RESET BALUN 2.405Ghz – 2.480GHz integrated antenna U.FL socket 2.405Ghz – 2.480GHz Rf terminal selection, filtering and matching circuitry LDO 1V8 1,8Vdc A/D LDO 1V25 *Frequencies internal to the EM358x 4.8GHz VCO and loop filter 12MHz High-frequency RC oscillator (system clock) 6MHz Peripheral clock (always half the rate of System Clock) 4MHz IF (intermediate frequency) mixer used by radio receiver 10kHz Low-frequency internal RC oscillator 1kHz Internal RC oscillator (used for system/sleep timer)

ETRX358x Labelling The label dimensions are 16.0mm x 14 mm (width x height). The label is suitable for reflow soldering. The font used should be Gill Sans MT for all text, except for the “telegesis” name, which should be displayed using Gill Sans Light MT. Imprint Description Model:ETRX3588 Module Order Code. Could be: ETRX3581, ETRX3582, ETRX3585, ETRX3586, ETRX3587, ETRX3588, ETRX3581HR, ETRX3582HR, ETRX3585HR, ETRX3586HR, ETRX3587HR, ETRX3588HR 000001 Indication for the serial number. Starting at 000000 for each batch incrementing with each module 090101 Production Date Code in the format YYMMDD, e.g. 090101 01 Indication for batch number Starting at 00 for beta panel, 01 for pilot run, etc... 02 Indication for the hardware revision (should be set to 02 until further notice) FCC ID: S4GEM358X The FCC ID IC: 8735A-EM358X The IC ID CE The CE Mark 2D-Barcode Information in the 2D-Barcode are the serial number [6 characters], the Part-Order code “ETRX3588“ [8 characters], identifier for the batch number [2 characters], the identifier for the hardware release [2 characters] and the production date code in the format Year-Month-Day [6 characters], all separated by a semicolon.

Position of the Label on ETRX3 Series Modules The non peel label is attached during production in the position as shown below. The label can withstand reflow soldering.

Technical Description of ETRX358x family The Telegesis ETRX358x and ETRX358xHR modules are fully integrated low power 2.4GHz ZigBee ® modules. On this module family an IEEE802.15.4-2003 compliant DSSS transceiver integrated into the Ember EM358x family of System-on-Chips together with an 32-bit ARM ® Cortex TM -M3 processor is used. The SoC’s integrated receive channel filtering allows for robust co-existence with other communication standards in the 2.4 GHz spectrum, such as IEEE 802.11-2007 and Bluetooth. To maintain the strict timing requirements imposed by the ZigBee and IEEE 802.15.4-2003 standards, the EM358x integrates a number of MAC functions, AES128 encryption accelerator, and automatic CRC handling into the hardware. The MAC hardware handles automatic ACK transmission and reception, automatic backoff delay, and clear channel assessment for transmission, as well as automatic filtering of received packets. The “HR” variants have a coaxial antenna output following the RF tuning and filtering whereas the non “HR” variants host an Antenova Rufa chip antenna as well as the appropriate tuning circuits.

Total number of pages : 124 TRaC Radio Test Report : TRA-014725WUS1a Applicant : Telegesis (UK) Ltd Apparatus : ETRX358x and ETRX358xHR radio modules Specification(s) : CFR47 Part 15.247 FCCID :S4GEM358X Purpose of Test : Certification Authorised by : : Authorised Signatory Issue Date :4 th March 2014 Authorised Copy Number : PDF TRaC Radio Test Report: TRA-014725WUS1a 2 Contents Section 1: Introduction 3 1.1 General 3 1.2 Tests Requested By 4 1.3 Manufacturer 4 1.4 Apparatus Assessed 5 1.5 Test Result Summary 6 1.6 Notes Relating To The Assessment 7 1.7 Deviations from Test Standards 7 Section 2: Measurement Uncertainty 8 2.1 Measurement Uncertainty Values 8 Section 3: Modifications 9 3.1 Modifications Performed During Assessment 9 Appendix A: Test Results 10 A1 6 dB Bandwidth 11 A2 Transmitter Peak Output Power 12 A3 Transmitter Power Spectral Density 14 A4 RF Antenna Conducted Spurious Emissions 15 A5 Antenna Gain 18 A6 Radiated Electric Field Emissions within the Restricted Bands of 15.205 19 A7 Unintentional Radiated Spurious Emissions 27 Appendix B: Supporting Graphical Data 28 Appendix C: Additional Test and Sample Details 90 Appendix D: Additional Information 96 Appendix E: Photographs and Figures 116 Appendix F: MPE Calculation 123 TRaC Radio Test Report: TRA-014725WUS1a 3 Section 1: Introduction 1.1 General This report contains an assessment of an apparatus against Electromagnetic Compatibility Standards based upon tests carried out on samples submitted to the Laboratory. Test performed at: TRaC [ X ] Unit E South Orbital Trading Park Hedon Road Hull, HU9 1NJ. United Kingdom. Telephone: +44 (0) 1482 801801 Fax: +44 (0) 1482 801806 TRaC [ ] Moss View Nipe Lane Up Holland West Lancashire, WN8 9PY United Kingdom Telephone: +44 (0) 1695 556666 Fax: +44 (0) 1695 577077 Email: [email protected] Web site: http://www.tracglobal.com Tests performed by: A Longley Report author: A Longley This report must not be reproduced except in full without prior written permission from TRaC Global Ltd. TRaC Radio Test Report: TRA-014725WUS1a 4 1.2 Tests Requested By This testing in this report was requested by: Telegesis (UK) Ltd 1 Abbey Barn Business Centre Abbey Barn Lane High Wycombe Bucks HP10 9QQ United Kingdom 1.3 Manufacturer As above TRaC Radio Test Report: TRA-014725WUS1a 5 1.4 Apparatus Assessed The following apparatus was assessed between: 18/10/13 and 13/02/14 ETRX358x and ETRX358xHR radio modules Radiated testing was performed using 3 antenna types (chip, quarter-wave and half-wave), conducted tests were performed on a sample with a coaxial cable fitted to the antenna terminal. The ETRX358x series consists of: ETRX3581 ETRX3582 ETRX3585 ETRX3586 ETRX3587 ETRX3588 The ETRX3586 module was selected as worst case by initial measurements. The ETRX358xHR series consists of: ETRX3581HR ETRX3582HR ETRX3585HR ETRX3586HR ETRX3587HR ETRX3588HR The ETRX3586HR module was selected as worst case by initial measurements. TRaC Radio Test Report: TRA-014725WUS1a 6 1.5 Test Result Summary Full details of test results are contained within Appendices A. The following table summarises the results of the assessment. The statements relating to compliance with the standards below apply ONLY as qualified in the notes and deviations stated in sections 1.6 to 1.7 of this test report. Test Type Regulation Measurement standard Result Radiated spurious emissions (Restricted bands) Title 47 of the CFR: Part 15 Subpart C; 15.247 ANSI C63.10 Pass Conducted spurious emissions (Non-restricted bands) Title 47 of the CFR: Part 15 Subpart C; 15.247 ANSI C63.10 Pass Occupied Bandwidth Title 47 of the CFR : Part 15 Subpart C; 15.247(a)(2) ANSI C63.10 Pass Conducted Carrier Power Title 47 of the CFR : Part 15 Subpart C; 15.247(b) ANSI C63.10 Pass Power Spectral Density Title 47 of the CFR : Part 15 Subpart C; 15.247(d) ANSI C63.10 Pass Unintentional Radiated Spurious Emissions Title 47 of the CFR: Part 15 Subpart C; 15.109 ANSI C63.10 Pass RF Safety Title 47 of the CFR : Part 15 Subpart C; 15.247(b)(5) - Pass Abbreviations used in the above table: Mod : Modification CFR : Code of Federal Regulations ANSI : American National Standards Institution REFE : Radiated Electric Field Emissions PLCE : Power Line Conducted Emissions TRaC Radio Test Report: TRA-014725WUS1a 7 1.6 Notes Relating To The Assessment With regard to this assessment, the following points should be noted: The results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. The apparatus was set up and exercised using the configurations, modes of operation and arrangements defined in this report only. Particular operating modes, apparatus monitoring methods and performance criteria required by the standards tested to have been performed except where identified in Section 1.7 of this test report (Deviations from Test Standards). For emissions testing, throughout this test report, “Pass” indicates that the results for the sample as tested were below the specified limit (refer also to Section 2, Measurement Uncertainty). Where relevant, the apparatus was only assessed using the monitoring methods and susceptibility criteria defined in this report. All testing with the exception of testing at the Open Area Test Site was performed under the following environmental conditions: Temperature : 17 to 23 °C Humidity : 45 to 75 % Barometric Pressure : 86 to 106 kPa All dates used in this report are in the format dd/mm/yy. This assessment has been performed in accordance with the requirements of ISO/IEC 17025. 1.7 Deviations from Test Standards There were no deviations from the standards tested to. TRaC Radio Test Report: TRA-014725WUS1a 8 Section 2: Measurement Uncertainty 2.1 Measurement Uncertainty Values Radiated Electric Field Emissions Quantity Range Quantity Expanded Uncertainty 9kHz to 150 kHz Amplitude dB(μV/m) ±1.6dB 150 kHz to 30 MHz Amplitude dB(μV/m…

Text truncated - open the document above for the full version.