S4RBRB8191Dual Band, Bi-Directional Wireless Booster

® Stealth Series Dual Band Booster Amplifiers BRB819 Series User Manual COTTAGES BUILDINGS HOMES BOATS RV’s & BUSES ® Stealth Series Dual Band Booster Amplifiers Features.....................................................................3 Specifications...........................................................3 Package contents....................................................4 Optional setup/parts..............................................5 Antenna and Booster Installation......................6 Installation Illustrations..........................................7 Control panel ...........................................................8 LED lights - Outside signal level/RX power......8 Gain level...................................................................9 Manual gain control...............................................9 LED lights - Gain level .........................................10 Tech support..........................................................10 Frequently asked questions..............................11 Troubleshooting guide.......................................11 Glossary of terms..................................................12 FCC information....................................................12 Warranty..............................................................12 Table of Contents Pg. 2 Features Gain Level Indicator (LED) Pwr ON/OFF Switch & LED Outside Signal Level (LED) Control Buttons for: Manual Gain - 2dB steps & LED Brightness Level Master Control Switch Specifications FCC Approved For: CDMA, WCDMA, LTE, HSPA, GSM, GPRS, EDGE Model: Gain Operating Frequencies: Max TX Power: CDMA/3G/4G Connector Type: Operating Temperature: Dimensions: (not including connectors) Weight: BRB819-58 58 dB Cellular/PCS 29.33 dBm N-Female 50 Ω MCT-Male 50 Ω F-Female 75 Ω -32°C to +85°C -25°F to +185°F 159x89x28.6 mm 6.25x3.5x1.125 in 0.45 kg/1.00 lb BRB819-62 62 dB Cellular/PCS 29.33 dBm N-Female 50 Ω MCT-Male 50 Ω F-Female 75 Ω -32°C to +85°C -25°F to +185°F 159x89x28.6 mm 6.25x3.5x1.125 in 0.45 kg/1.00 lb BRB819-68 68 dB Cellular/PCS 29.33 dBm N-Female 50 Ω MCT-Male 50 Ω F-Female 75 Ω -32°C to +85°C -25°F to +185°F 159x89x28.6 mm 6.25x3.5x1.125 in 0.45 kg/1.00 lb Pg. 3 Package Contents Models: BRB819-68XK/68NK Kit Series Models: BRB819-58XK/62XK/62NK Kit Series Models: BRB819-58X/62X,N,F/68X,N,F Series Package Contains: Package Contains: Package Contains: BRB819 Series booster AC/DC 120V wall power supply Two Smoothtalker directional antennas Extension Co-ax cable BRB819 Series booster AC/DC 120V wall power supply Two Smoothtalker directional antennas BRB819 Series booster AC/DC 120V wall power supply Pg. 4 Optional Setup with Line Amplifier Connect to Indoor Antenna Connect to Outdoor Antenna BST Series 3Watt Booster (Line amplifier for remote locations) Optional Parts Omni Directional Antennas Co-Ax Cables Antenna Pole Mount Kit RF Splitter/Power DividerCo-Ax Adapters Pg. 5 Antenna and Booster Installation a) Location: There are three choices. fig. 2, 3, 4. The choice of donor antenna location depends on the signal strength at the donor antenna location. Use your phone to determine if signal at your chosen location is adequate. Better signal level at the donor antenna location equals larger indoor coverage area. b) Directional Donor Antenna: if using a directional donor antenna supplied in the kit (Part# SEMD1), point the antenna toward the desired tower. If the loca- tion of the desired tower is not known, initiate a phone call and use the signal indicator on your phone after the booster is operational, while turning the donor antenna, to determine optimum donor antenna direction for maximum signal strength. c) Omni-directional Donor Antenna: if using an omni-directional donor antenna, it is recommended that it is placed as far as possible from the inside anten- na, usually, ‘outside pole mount’ is recommended (Fig. 3). Use of omni-directional antennas will require substantial separation distance compared to directional antennas. Fig. 1 Donor Antenna: (outdoor signal antenna) Distribution Antenna: (indoor signal antenna) Connection and Start Procedure: Amplifier/Booster Location: Install the repeater in a location that has proper ventilation, away from excessive heat and moisture. a) Location: There are three choices. fig. 2, 3, 4. The choice of donor antenna location depends on the area to be covered. b) Directional Distribution Antenna: it is recommended that directional antennas are oriented in a fashion that is back to back of each other Fig. 1 c) Omni-directional Distribution Antenna: it is important that omni-directional antennas are separated as far apart as possible from each other. Use of omni-directional an- tennas will require substantial separation distance compared to directional antennas. Fig. 1 d) Splitting Indoor Signal: it is possible to use more than one indoor antenna to cover areas that are separated by walls or floors by using antenna splitters or power dividers, however splitters have a level of signal loss (3dB) and the added cable run will also have signal loss, therefore the coverage area will be diminished. As a general rule, if outside signal is good, splitting signal to more than one distribution antenna results in reasonable coverage. If outside signal is poor or marginal, splitting signal to more than one distribution antenna results in decreased coverage for both distribution antennas. Use only genuine SmoothTalker splitters. Contact your dealer or www.smoothtalker.com WARNING: Make sure all cables have a good connection and are connected to the corresponding antenna port on the Booster. DO NOT APPLY POWER or turn on the power switch on the Amplifier/Booster before all cables and antennas are connected. Antenna connections must be snug and hand tight, ‘Do Not Use Pliers or Wrench’. Connect the cable from outdoor antenna to RF port (antenna connector) labeled “Outdoor Antenna”. Connect cable from indoor antenna to RF port labe…

Text truncated - open the document above for the full version.

Mobile Communications, Inc. FCC ID: S4RBRB8191 Report Number: R1104043-2224 Page 24 of 27 FCC Part 22H/24E Test Report 14 EXHIBIT C – EUT PHOTOGRAPHS 14.1 EUT - Top View 14.2 EUT– Side View 1 Mobile Communications, Inc. FCC ID: S4RBRB8191 Report Number: R1104043-2224 Page 25 of 27 FCC Part 22H/24E Test Report 14.3 EUT– Side View 2 14.4 EUT – Bottom View

Gain Level Outside Signal Smoothtalker Stealth X-2 Mt Gain Level Outside Signal RX Power Smoothtalker Stealth X - 2 800mhz 1900mhz Mobile Communications Inc. Dual Band Wireless Booster/Amplifier Cellular/PCS RX/TX 800MHz/1900MHz Model# BRB819 -58 FCC ID:S4RBRB8191 Master Control 1900mhz 800 / 900 Model# BRB819 -58 FCC ID:S4RBRB8191 IC:3585A-BRB8191 Gain Level Outside Signal RX Power Smoothtalker Stealth X-2 800mhz Mobile Communications Inc. Dual Band Wireless Booster/Amplifier Cellular/PCS RX/TX 800MHz/1900MHz Master Control 800mhz 1900mhz D ua l B an d Wi re l ess Booster/Amplifier Cellular/PCS RX/TX 800MHz/1900MHz Model# BRB819-62 FCC ID:S4RBRB8191 IC:3585A-BRB8191 C on t ro l Gain Level Outside Signal RX Power Smoothtalker Stealth X-2 Mobile Communications Inc. DlBdWil Master Control Gain Level Outside Signal RX Power 800mhz 1900mhz Mobile Communications Inc. Dual Band Wireless Booster/Amplifier Cellular/PCS RX/TX 800MHz/1900MHz Model# BRB819-68 FCC ID:S4RBRB8191 IC:3585A-BRB8191 Master Control BRB819-68 FCC ID:S4RBRB8191 IC:3585A-BRB8191

Mobile Communications, Inc. FCC ID: S4RBRB8191 Report Number: R1104043-2224 Page 26 of 27 FCC Part 22H/24E Test Report 14.5 EUT – Cover off View 14.6 EUT – Main Board Top View Mobile Communications, Inc. FCC ID: S4RBRB8191 Report Number: R1104043-2224 Page 27 of 27 FCC Part 22H/24E Test Report 14.7 EUT – Main Board Bottom View 14.8 AC/DC Power Adapter ***** End of Report *****

Mobile Communications, Inc. FCC ID: S4RBRB8191 Report Number: R1104043-2224 Page 10 of 27 FCC Part 22H/24E Test Report 5 FCC §1.1307(b) (1) & §2.1091 - RF EXPOSURE INFORMATION 5.1 Applicable Standard According to §1.1310 and §2.1091 (Mobile Devices) RF exposure is calculated. Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minute) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density 5.2 MPE Prediction Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 S = PG/4πR² Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Cellular Band Downlink: Maximum peak output power at antenna input terminal (dBm):10.49 Maximum peak output power at antenna input terminal (mW):11.19 Prediction distance (cm):40 Prediction frequency (MHz):881.5 Antenna Gain, typical (dBi):10 Maximum Antenna Gain (numeric):10 Power density at predication frequency and distance (mW/cm 2 ):0.0056 MPE limit for uncontrolled exposure at predication frequency (mW/cm 2 ):0.5877 Uplink: Maximum peak output power at antenna input terminal (dBm):29.33 Maximum peak output power at antenna input terminal (mW):857.04 Prediction distance (cm):40 Prediction frequency (MHz):836.5 Antenna Gain, typical (dBi):10 Maximum Antenna Gain (numeric):10 Power density at predication frequency and distance (mW/cm 2 ):0.4263 MPE limit for uncontrolled exposure at predication frequency (mW/cm 2 ):0.5577 Mobile Communications, Inc. FCC ID: S4RBRB8191 Report Number: R1104043-2224 Page 11 of 27 FCC Part 22H/24E Test Report PCS Band Downlink: Maximum peak output power at antenna input terminal (dBm):8.98 Maximum peak output power at antenna input terminal (mW):7.91 Prediction distance (cm):40 Prediction frequency (MHz):1960 Antenna Gain, typical (dBi):12 Maximum Antenna Gain (numeric):15.85 Power density at predication frequency and distance (mW/cm 2 ):0.00624 MPE limit for uncontrolled exposure at predication frequency (mW/cm 2 ):1.0 Uplink: Maximum peak output power at antenna input terminal (dBm):28.10 Maximum peak output power at antenna input terminal (mW):645.65 Prediction distance (cm):40 Prediction frequency (MHz):1880 Antenna Gain, typical (dBi):12 Maximum Antenna Gain (numeric):15.85 Power density at predication frequency and distance (mW/cm 2 ):0.509 MPE limit for uncontrolled exposure at predication frequency (mW/cm 2 ):1.0 Test Result The device complies with the MPE requirements by providing a safe separation distance of 40 cm between the antenna, including any radiating structure, and any persons when normally operated based on a 12 dBi antenna. The proposed RF exposure safety information has been included in the User’s Manual.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP*, NIST, or any agency of the Federal Government. * This report may contain data that are not covered by the NVLAP accreditation and are marked with an asterisk “*” (Rev.2) FCC PART 22H, 24E TEST AND MEASUREMENT REPORT For Mobile Communications, Inc. 230 Earl Steward Dr. Aurora, Ontario L4G 6V8, Canada FCC ID: S4RBRB8191 Report Type: Original Report Product Type: Dual Band Wireless Booster Test Engineer: Quinn Jiang Report Number: R1104043-2224 Report Date: 2011-07-25 Reviewed By: Victor Zhang EMC/RF Lead Prepared By: (91) Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue, Sunnyvale, CA 94089, USA Tel: (408) 732-9162 Fax: (408) 732 9164 Mobile Communications, Inc. FCC ID: S4RBRB8191 Report Number: R1104043-2224 Page 2 of 27 FCC Part 22H/24E Test Report TABLE OF CONTENTS 1 GENERAL INFORMATION ..............................................................................................................................5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT).........................................................................5 1.2 MECHANICAL DESCRIPTION............................................................................................................................5 1.3 OBJECTIVE.......................................................................................................................................................5 1.4 RELATED SUBMITTAL(S)/GRANT(S) ................................................................................................................5 1.5 TEST METHODOLOGY......................................................................................................................................5 1.6 MEASUREMENT UNCERTAINTY.......................................................................................................................6 1.7 TEST FACILITY.................................................................................................................................................6 2 SYSTEM TEST CONFIGURATION..................................................................................................................7 2.1 JUSTIFICATION.................................................................................................................................................7 2.2 EUT EXERCISE SOFTWARE..............................................................................................................................7 2.3 SPECIAL ACCESSORIES....................................................................................................................................7 2.4 EQUIPMENT MODIFICATIONS...........................................................................................................................7 2.5 INTERNAL CONFIGURATION.............................................................................................................................7 2.6 LOCAL SUPPORT EQUIPMENT..........................................................................................................................7 2.7 POWER SUPPLY AND LINE FILTERS..................................................................................................................7 2.8 INTERFACE PORTS AND CABLING....................................................................................................................7 3 SUMMARY OF TEST RESULTS.......................................................................................................................8 4 FCC §2.1047 - MODULATION CHARACTERISTIC......................................................................................9 4.1 APPLICABLE STANDARD..................................................................................................................................9 4.2 TEST RESULT...................................................................................................................................................9 5 FCC §1.1307(B) (1) & §2.1091 - RF EXPOSURE INFORMATION..............................................................10 5.1 APPLICABLE STANDARD................................................................................................................................10 5.2 MPE PREDICTION..........................................................................................................................................10 6 FCC §2.1053, §22.917 & §24.2383 - RADIATED SPURIOUS EMISSIONS .................................................12 6.1 APPLICABLE STANDARD................................................................................................................................12 6.2 TEST PROCEDURE..........................................................................................................................................12 6.3 TEST SETUP BLOCK DIAGRAM.......................................................................................................................13 6.4 TEST EQUIPMENT LIST AND DETAILS............................................................................................................14 6.5 TEST ENVIRONMENTAL CONDITIONS.............................................................................................................14 6.6 TEST RESULTS...............................................................................................................................................14 7 FCC §2.1046, §22.913(A) & §24.232 - RF OUTPUT POWER ........................................................................16 7.1 APPLICABLE STANDARD......................................................................................…

Text truncated - open the document above for the full version.

Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 1 of 69 Mobile Communications, Inc FCC ID: S4RBRB8191, IC: 3585A-BRB8191 FCC and IC Conducted testing data & plots Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 2 of 69 TABLE OF CONTENTS 1 CONDUCTED TEST SETUP BLOCK DIAGRAM ......................................................................................... 3 2 CERTIFICATE OF CALIBRATION ................................................................................................................ 4 3 FCC §2.1046, §22.913(A) & §24.232 - RF OUTPUT POWER ......................................................................... 6 4 FCC §2.1049, §22.917, §22.905 & §24.238 - OCCUPIED BANDWIDTH ..................................................... 12 5 FCC §2.1051, §22.917 & §24.238(A) - SPURIOUS EMISSIONS AT ANTENNA TERMINALS............... 32 6 FCC §22.917 & §24.238 - BAND EDGE........................................................................................................... 46 7 IC RSS – 131 § 3.2 (D) & §6.1 – AMPLIFIER GAIN AND BANDWIDTH.................................................. 62 8 IC RSS – 131 §6.2 – MEAN OUTPUT POWER.............................................................................................. 64 Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 3 of 69 1 Conducted Test Setup Block Diagram Conducted Test Setup Block Diagram Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 4 of 69 2 Certificate of Calibration Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 5 of 69 Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 6 of 69 3 FCC §2.1046, §22.913(a) & §24.232 - RF OUTPUT POWER Cellular Band: Downlink: 869-894 MHz Low Middle Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 7 of 69 High Uplink: 824-849 MHz Low Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 8 of 69 Middle High Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 9 of 69 PCS Band Downlink: 1930-1990 MHz Low Middle Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 10 of 69 High Uplink: 1850-1910 MHz Low Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 11 of 69 Middle High Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 12 of 69 4 FCC §2.1049, §22.917, §22.905 & §24.238 - OCCUPIED BANDWIDTH Cellular Band: Modulation: CDMA, Downlink: 869-894 MHz Low CH (Input/Output) Middle CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 13 of 69 High CH (Input/Output) Modulation: CDMA, Uplink: 824-849 MHz Low CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 14 of 69 Middle CH (Input/Output) High CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 15 of 69 PCS Band: Modulation: CDMA, Downlink: 1930-1990 MHz Low CH (Input/Output) Middle CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 16 of 69 High CH (Input/Output) Modulation: CDMA, Uplink: 1850-1910 MHz Low CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 17 of 69 Middle CH (Input/Output) High CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 18 of 69 Cellular Band: Modulation: GSM, Downlink: 869-894 MHz Low CH (Input/Output) Middle CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 19 of 69 High CH (Input/Output) Modulation: GSM, Uplink: 824-849 MHz Low CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 20 of 69 Middle CH (Input/Output) High CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 21 of 69 PCS Band: Modulation: GSM, Downlink: 1930-1990 MHz Low CH (Input/Output) Middle CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 22 of 69 High CH (Input/Output) Modulation: GSM, Uplink: 1850-1910 MHz Low CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 23 of 69 Middle CH (Input/Output) High CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 24 of 69 Cellular Band: Modulation: WCDMA, Downlink: 869-894 MHz Low CH (Input/Output) Middle CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 25 of 69 High CH (Input/Output) Modulation: WCDMA, Uplink: 824-849 MHz Low CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 26 of 69 Middle CH (Input/Output) High CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 27 of 69 PCS Band: Modulation: WCDMA, Downlink: 1930-1990 MHz Low CH (Input/Output) Middle CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 28 of 69 High CH (Input/Output) Modulation: WCDMA, Uplink: 1850-1910 MHz Low CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 29 of 69 Middle CH (Input/Output) High CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 30 of 69 Cellular Band: Modulation: LTE, Downlink: 869-894 MHz Middle CH (Input/Output) Modulation: LTE, Uplink: 824-849 MHz Middle CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 31 of 69 PCS Band: Modulation: LTE, Downlink: 1930-1990 MHz Middle CH (Input/Output) Modulation: LTE, Uplink: 1850-1910 MHz Middle CH (Input/Output) Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BRB8191 Page 32 of 69 5 FCC §2.1051, §22.917 & §24.238(a) - SPURIOUS EMISSIONS AT ANTENNA TERMINALS Cellular Band: Downlink: 869-894 MHz, Frequency: 881.5 MHz Inter-Modulation: Lowest Channel Input Mobile Communications, Inc. FCC ID: S4RBRB8191, IC: 3585A-BR…

Text truncated - open the document above for the full version.

Mobile Communications, Inc. FCC ID: S4RBRB8191 Report Number: R1104043-2224 Page 22 of 27 FCC Part 22H/24E Test Report 13 EXHIBIT B - TEST SETUP PHOTOGRAPHS 13.1 Radiated Emissions – Above 1 GHz Front View 13.2 Radiated Emissions - Above 1 GHz Rear View Mobile Communications, Inc. FCC ID: S4RBRB8191 Report Number: R1104043-2224 Page 23 of 27 FCC Part 22H/24E Test Report 13.3 Radiated Emissions – Below 1 GHz Front View 13.4 Radiated Emissions – Below 1 GHz Rear View