S9AUSADECT-S37US DECT PHONE - HEADSET

www.telstra.com © COPYRIGHT 2005 Telstra Corporation Limited This work is copyright. All rights reserved. Other than for purposes and subject to conditions prescribed under the Copyright Act, no part of it may in any form or by any means (electronic, mechanical, photo copying, microcopying, scanning, recording or otherwise) be reproduced, stored in a retrieval system or transmitted without prior permission from Telstra Corporation Limited ABN 33 051 775 556. ™ Trade Mark of Telstra Corporation Limited ® Registered Trade Mark of Telstra Corporation Limited Telstra 5200/5200a Digital DECT Cordless Telephone / Digital DECT Cordless Telephone with Digital Answering Machine If you have any problems with your phone, refer to the Help section of this User Guide or call TecHelp on 1300 369 193. 5200-5200a.indd, Spread 1 of 26 - Pages (52, 1) 20/9/05 12:31 PM 1 Introduction to your Telstra 5200/5200a Digital DECT Cordless Telephone / Digital DECT Cordless Telephone with Digital Answering Machine ● Send and receive text messages^ ● 50 Name and number phonebook ● Use Calling Number Display* to see the number of the person calling and keep track of unanswered calls ● Last number redial to display and redial the last 20 numbers called from your handset ● Use up to 5 handsets with the base without the need for additional wiring, or using the same phone line ^ For most Telstra and Telstra reseller customers for messages between compatible services. Charges apply. * Monthly charges apply. Service available in most areas. Not available for blocked calls. As a Digitally Enhanced Cordless Telecommunications (DECT) product, your Telstra 5200/5200a provides: - ● Digital clarity ● Digital range ● Digital security IMPORTANT Please retain this booklet with your sales receipt as proof of the date of purchase Customer Service If you require assistance in operating this product please call the TecHelp Information Line – 1300 369 193 – or contact us by e-mail at: [email protected] If you are trying to access a Telstra Network Service and require assistance specifically related to the network service or would like to subscribe to the service, contact Telstra on 132200 for residential or 132000 for business. Product Warranty Subject to the conditions below, Telstra guarantees this product against any defect in materials or workmanship under conditions of normal use for 13 months from date of purchase. The benefits conferred by this warranty are in addition to other warranties and remedies that are implied under the Trade Practices Act and similar State and Territory laws (Statutory Rights). Subject to your Statutory Rights, the goods will not be eligible for service under this warranty if: A. Proof of purchase cannot be provided; B. The defect was caused by an accident, misuse, abuse, improper installation or operation, vermin infestation, lack of reasonable care, unauthorised modification, loss of parts, tampering or attempted repair by a person not authorised by Telstra; or C. The product has been damaged by lightning or a mains power surge. To obtain service during the terms of this warranty call the TecHelp Information Line on – 1300 369 193 – or contact us by e-mail at: [email protected] If it is necessary to have the product serviced, the Customer Service Representative will inform you of the product return process. Please ensure that: A. You provide proof of purchase; B. Your product is suitably packaged; and C. You have included all components from the original purchase. Subject to your Statutory Rights: A. Any claim under this warranty is limited to the cost of repair or replacement of the product; and B. If the goods are found to be in sound working order by the authorised service centre, you may be charged a fee for service and for any other direct costs associated with having the product delivered for service. Product warranty & Customer service 50 5200-5200a.indd, Spread 2 of 26 - Pages (2, 51) 20/9/05 12:31 PM Access code and entering a pause If you are connecting your Telstra 5200/5200a to a PABX you may need to enter an access code (e.g. 9) to get an outside line. So that the PABX has time to pick up an outside line before the rest of the number is dialled, you may need to add a pause in the dialling sequence. For example: 9 - PABX code for an outside line p – Pause inserted in dialing sequence 9PXXX XXXX - Rest of phone number Recall The RECALL button is used when connected to certain PABX’s and with some Telstra phone features. Setting the FLASH time 1. Press the button and scroll to SETUP. 2. Press the button to confirm. 3. Scroll to RECALL and press the button to confirm. 4. Using the and buttons select the flash time RECALL 1 (100MS) or RECALL 2 (600ms). 5. Press the button to confirm. PIN number If you change the System PIN, keep a record of the new number by writing in the space provided on this page. ■■■■■■■■ PIN NUMBER Note. When storing a number in the phonebook, at the point you want to insert a pause, press and hold down until P is displayed. General information 49 2 IMPORTANT This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. This User Guide provides you with all the information you need to get the most from your phone. Before you make your first call you will need to set up your phone. Follow the simple instructions in ‘Getting Started’, on the next few pages. Need help? If you have any problems setting up or using your Telstra 5200/5200a please contact the TecHelp line on 1300 369 193. Alternatively, you may find the answer in ‘Help’ at the back of this guide. Got everything? Telstra 5200 SMS ● Telstra 5200 handset ● Telstra 5200 base unit ● 2 x AAA NiMH rechargeable batteries ● AC power adaptor ● Telephone line cord ● Telephone adaptor plug Telstra 5200a SMS ● Telstra 5200a handset ● Telstra 5200a base unit ● 2 x AAA NiMH rechargeable batteries ● AC power a…

Text truncated - open the document above for the full version.

FCC ID: S9AUSADECT-S37 ETC Report No.: 06-05-MAS-078-01 Page A1 of A1 ANNEX A: EXTERNAL CONSTRUCTION PHOTOS OF EUT 1. Outside view 1 of EUT 2. Outside view 2 of EUT

FCC ID: S9AUSADECT-S37 ETC Report No.: 06-05-MAS-078-01 Page B1 of B3 ANNEX B: INTERNAL CONSTRUCTION PHOTOS OF EUT 1. Inside View 1 of EUT 2. Inside View 2 of EUT FCC ID: S9AUSADECT-S37 ETC Report No.: 06-05-MAS-078-01 Page B2 of B3 3. Front view of PCB1 4. Rear view of PCB1 FCC ID: S9AUSADECT-S37 ETC Report No.: 06-05-MAS-078-01 Page B3 of B3 5. Front view of PCB2

Report No.: 06-05-MAS-078-03 Page 1 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong FCC ID: S9AUSADECT-S37 Report No.: 06-05-MAS-078-03 Client: Suncorp Communications Limited Product: US DECT Handset Model: USA DECT-S37 Manufacturer/supplier: Shenzhen Guo Wei Electronics Co., Ltd. Date test item received: 2006/06/01 Date test campaign completed: 2006/07/05 Date of issue: 2006/07/10 Test Result: ■ Compliance □ Not Compliance Statement of Compliance: The SAR values measured for the test sample are below the maximum recommended level of 1.6 mW/g averaged over any 1g tissue according to FCC OET Bulletin 65 Supplement C (Edition 01-01) and Industry Canada RSS-102 (Issue 2, 2005). The test result only corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 60 pages Test Engineer Eric Lin Checked by Joe Hsieh Approved by TÜV HK Jeff Pong The testing described in this report has been carried out to the best of our knowledge and ability, and our responsibility is limited to the exercise of reasonable care. This certification is not intended to believe the sellers from their legal and/or contractual obligations. SAR Evaluation Report for FCC OET Bulletin 65 Supplement C and Industry Standard RSS-102 Issue 2 Report No.: 06-05-MAS-078-03 Page 2 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Applicant Information Client : Suncorp Communications Limited Address : Room 1907-08, Harcourt House, 39 Gloucester Road, Wanchai, Hong Kong Contact : CW Cheung Title : Head of Engineering Department Manufacturer : Shenzhen Guo Wei Electronics Co., Ltd. Address : No.68 Guowei Road, Liantang Industrial District, Shenzhen, P.R.C. EUT : UPCS DECT Cordless Handset Trade Name : SUNCORP Model No. : USA DECT-S37 Standard Applied : FCC OET 65 Supplement C (Edition 01-01, June 2001) Industry Standard RSS-102 Issue 2 (November 2005) IEEE Standard 1528-2003 Test Location : Electronics Testing Center, Taiwan (www.etc.org.tw) No.8, Lane 29, Wenming RD.,LeShan Tsuen, GuiShan Shiang,Taoyuan County 33383, Taiwan, R.O.C. The US DECT handset of USA DECT-S37 is in compliance with the FCC Report and Order 93-326 and Health Canada Safety Code 6, and the tests were performed according to the FCC OET65c and RSS-102 Issue 2 for uncontrolled exposure. Report No.: 06-05-MAS-078-03 Page 3 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Table of Contents EXECUTIVE SUMMARY........................................................................................................................ 5 1. GENERAL INFORMATION............................................................................................................. 6 1.1 Description of Equipment Under Test ..................................................................................... 6 1.2 Photograph of EUT .................................................................................................................. 6 1.3 Environment Conditions .......................................................................................................... 7 1.4 FCC Requirements for SAR Compliance Testing ................................................................... 7 1.4.1 RF Exposure Limits ..........................................................................................................................7 1.5 The SAR Measurement Procudure for Mobile ........................................................................ 8 1.5.1 General Requirements.......................................................................................................................8 1.5.2 Phantom Requirements .....................................................................................................................8 1.5.3 Test Positions ....................................................................................................................................8 1.5.4 Test Procedures...............................................................................................................................10 2 D ESCRIPTION OF THE TEST EQUIPMENT.................................................................................. 11 2.1 Test Equipment List ............................................................................................................... 11 2.2 DASY4 Measurement System Diagram: ............................................................................... 12 2.3 DASY4 Measurement Server................................................................................................. 13 2.4 DAE (Data Acquisition Electronics)...................................................................................... 14 2.5 Phantom.................................................................................................................................. 15 2.6 Device Holder ........................................................................................................................ 15 2.7 Specifications of Probes ......................................................................................................... 16 2.8 SAR Measurement Procedures in DASY4............................................................................. 16 2.9 Simulating Liquids ................................................................................................................. 17 2.10 System Performance Check.................................................................................................... 17 2.10.1 Purpose .......................................................................................................................................17 2.10.2 System Performance Check Procedure......…

Text truncated - open the document above for the full version.

Report No.: 06-05-MAS-078-03 Page 31 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong ANNEX B: SAR RESULTS System Performance Check Head Report No.: 06-05-MAS-078-03 Page 32 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Report No.: 06-05-MAS-078-03 Page 33 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Report No.: 06-05-MAS-078-03 Page 34 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Left Head Report No.: 06-05-MAS-078-03 Page 35 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Left Cheek Report No.: 06-05-MAS-078-03 Page 36 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Left Tilted Report No.: 06-05-MAS-078-03 Page 37 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Right Head Report No.: 06-05-MAS-078-03 Page 38 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Right Cheek Report No.: 06-05-MAS-078-03 Page 39 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Right Tilted Report No.: 06-05-MAS-078-03 Page 40 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Left Cheek Report No.: 06-05-MAS-078-03 Page 41 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Left Cheek Report No.: 06-05-MAS-078-03 Page 42 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong

Report No.: 06-05-MAS-078-03 Page 43 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong ANNEX C: DIPOLE CERTIFICATE Report No.: 06-05-MAS-078-03 Page 44 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Report No.: 06-05-MAS-078-03 Page 45 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Report No.: 06-05-MAS-078-03 Page 46 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Report No.: 06-05-MAS-078-03 Page 47 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Report No.: 06-05-MAS-078-03 Page 48 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Report No.: 06-05-MAS-078-03 Page 49 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Report No.: 06-05-MAS-078-03 Page 50 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Report No.: 06-05-MAS-078-03 Page 51 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong ANNEX D: PROBE CERTIFICATE Report No.: 06-05-MAS-078-03 Page 52 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Report No.: 06-05-MAS-078-03 Page 53 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Report No.: 06-05-MAS-078-03 Page 54 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Report No.: 06-05-MAS-078-03 Page 55 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Report No.: 06-05-MAS-078-03 Page 56 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Report No.: 06-05-MAS-078-03 Page 57 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Report No.: 06-05-MAS-078-03 Page 58 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong Report No.: 06-05-MAS-078-03 Page 59 of 60 FCC ID: S9AUSADECT-S37 TÜV Hong Kong Limited Room 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong

FCC ID: S9AUSADECT-S37 ETC Report No. :06-05-MAS-078-01 Sheet 1 of 84 Sheets Rev. No 1.0 CONFORMANCE TEST REPORT FOR FCC Part 15, subpart D Report No.: 06-05-MAS-078-01 Client: Suncorp Communications Limited Product: DECT PHONE (PP) Model: USA DECT-S37 FCC ID: S9AUSADECT-S37 Manufacturer/supplier: Shenzhen Guo Wei Electronics Co., Ltd Date test item received: 2006/05/11 Date test campaign completed: 2006/07/28 Date of issue: 2006/07/28 The test result only corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 84 pages Total number of pages of photos: External photos 1 pages Internal photos 3 pages Setup photos 2 pages Test Engineer Checked By Approved By James Cheng Joe Hsieh Jeff Pong TÜV Hong Kong Ltd. - TÜV SÜD Group Unit 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Kowloon FCC ID: S9AUSADECT-S37 ETC Report No. :06-05-MAS-078-01 Sheet 2 of 84 Sheets Rev. No 1.0 Table of Contents Page 1 GENARAL INFORMATION...................................................................................................................4 1.1 Testing Laboratory............................................................................................................................... 4 1.2 Client Information................................................................................................................................. 4 1.3 Manufacturer........................................................................................................................................ 4 2 TEST INFORMATION............................................................................................................................5 2.1 Description of Tested Device(s)........................................................................................................ 5 2.2 Test Environment................................................................................................................................. 5 3 TEST REPORT SUMMARY..................................................................................................................6 3.1 Test Summary...................................................................................................................................... 6 3.2 Other Comments................................................................................................................................. 7 4 TEST SETUP...........................................................................................................................................8 4.1 Frequency and Timing Measurements............................................................................................ 8 4.2 Conducted Emission Tests................................................................................................................ 8 4.3 Radiated Emission Tests.................................................................................................................... 9 4.4 Power line Conducted Tests.............................................................................................................. 9 4.5 Monitoring Tests................................................................................................................................ 10 5 TEST EQUIPMENT LIST....................................................................................................................11 6 TEST RESULT......................................................................................................................................12 6.1 Coordination with fixed microwave................................................................................................. 12 6.2 Cross Reference................................................................................................................................ 13 6.3 Labeling Requirements..................................................................................................................... 14 6.4 Power line Conducted Emissions................................................................................................... 15 6.5 Antenna Requirement....................................................................................................................... 16 6.6 Digital Modulation Techniques........................................................................................................ 16 6.7 Peak Transmit Power........................................................................................................................ 17 6.8 Power Spectral Density.................................................................................................................... 21 6.9 Antenna Gain..................................................................................................................................... 25 6.10 Automatic discontinuation of transmission.................................................................................. 25 6.11 Safety exposure levels................................................................................................................... 26 6.12 Emission Bandwidth B.................................................................................................................... 27 6.13 Monitoring time................................................................................................................................ 31 6.14 Monitoring threshold....................................................................................................................... 31 6.15 Maximum transmit period............................................................................................................... 32 6.16 System Acknowledgement............................................................................................................. 34 FCC ID: S9AUSADE…

Text truncated - open the document above for the full version.

FCC ID: S9AUSADECT-S37 ETC Report No. :06-05-MAS-078-01 Sheet 1 of 84 Sheets Rev. No 1.0 CONFORMANCE TEST REPORT FOR FCC Part 15, subpart D Report No.: 06-05-MAS-078-01 Client: Suncorp Communications Limited Product: DECT PHONE (PP) Model: USA DECT-S37 FCC ID: S9AUSADECT-S37 Manufacturer/supplier: Shenzhen Guo Wei Electronics Co., Ltd Date test item received: 2006/05/11 Date test campaign completed: 2006/08/03 Date of issue: 2006/08/03 The test result only corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 84 pages Total number of pages of photos: External photos 1 pages Internal photos 3 pages Setup photos 2 pages Test Engineer Checked By Approved By James Cheng Joe Hsieh Jeff Pong TÜV Hong Kong Ltd. - TÜV SÜD Group Unit 601, InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Kowloon FCC ID: S9AUSADECT-S37 ETC Report No. :06-05-MAS-078-01 Sheet 2 of 84 Sheets Rev. No 1.0 Table of Contents Page 1 GENARAL INFORMATION...................................................................................................................4 1.1 Testing Laboratory............................................................................................................................... 4 1.2 Client Information................................................................................................................................. 4 1.3 Manufacturer........................................................................................................................................ 4 2 TEST INFORMATION............................................................................................................................5 2.1 Description of Tested Device(s)........................................................................................................ 5 2.2 Test Environment................................................................................................................................. 5 3 TEST REPORT SUMMARY..................................................................................................................6 3.1 Test Summary...................................................................................................................................... 6 3.2 Other Comments................................................................................................................................. 7 4 TEST SETUP...........................................................................................................................................8 4.1 Frequency and Timing Measurements............................................................................................ 8 4.2 Conducted Emission Tests................................................................................................................ 8 4.3 Radiated Emission Tests.................................................................................................................... 9 4.4 Power line Conducted Tests.............................................................................................................. 9 4.5 Monitoring Tests................................................................................................................................ 10 5 TEST EQUIPMENT LIST....................................................................................................................11 6 TEST RESULT......................................................................................................................................12 6.1 Coordination with fixed microwave................................................................................................. 12 6.2 Cross Reference................................................................................................................................ 13 6.3 Labeling Requirements..................................................................................................................... 14 6.4 Power line Conducted Emissions................................................................................................... 15 6.5 Antenna Requirement....................................................................................................................... 16 6.6 Digital Modulation Techniques........................................................................................................ 16 6.7 Peak Transmit Power........................................................................................................................ 17 6.8 Power Spectral Density.................................................................................................................... 21 6.9 Antenna Gain..................................................................................................................................... 25 6.10 Automatic discontinuation of transmission.................................................................................. 25 6.11 Safety exposure levels................................................................................................................... 26 6.12 Emission Bandwidth B.................................................................................................................... 27 6.13 Monitoring time................................................................................................................................ 31 6.14 Monitoring threshold....................................................................................................................... 31 6.15 Maximum transmit period............................................................................................................... 32 6.16 System Acknowledgement............................................................................................................. 34 FCC ID: S9AUSADE…

Text truncated - open the document above for the full version.

FCC ID: S9AUSADECT-S37 ETC Report No.: 06-05-MAS-078-01 Page 1 of 2 Photos of Radiation Measuring Setup x-axis FCC ID: S9AUSADECT-S37 ETC Report No.: 06-05-MAS-078-01 Page 2 of 2 y-axis z-axis