SBP-BC01Bridge Controller

Vantaa Bridge Guide Contents Features ...................................................................................................................... 2 Description ................................................................................................................... 2 What’s Included ........................................................................................................... 2 Compatibility ................................................................................................................ 2 Requirements .............................................................................................................. 3 Help... .......................................................................................................................... 4 Setup: .......................................................................................................................... 4 Regulatory Statements ................................................................................................ 5 Certification .................................................................................................................. 5 Limited Warranty .......................................................................................................... 6 Features  Easily connect to all your Vantaa devices and allows you to manage, monitor, control and configure lighting control that’s just right for your home – all with the Bridge and free Vantaa app  Bridges Vantaa devices to your favorite things such as smart voice services (Alexa, Siri, Google Assistant), whole home systems (Smartthings, Control4, etc.) and other 3 rd party systems and services  Backwards compatible with most legacy Insteon-branded devices.  Powerful Insteon technology inside, uses an unclogged long range 915MHz radio in concert with powerline communication to create a blanket of coverage to all parts of the home – doesn’t conflict with your Wi-Fi and doesn’t require any network admin skills to deploy Description TBD What’s Included  Bridge  Power Cable  Ethernet Cable  Quick Start Guide Compatibility  Works with all Vantaa Products o Keypad o Dial Switch o Dial Controller o Paddle Switch o Outlet o Multi-sensor  Works with most legacy Insteon-branded devices such as... o Wall switches  Dimmers  On/Off o Keypads  6-button  8-button o Outlets  On/Off Dual Outlet  Dimmer Outlet  On/Off Outlet o Sensors  Open/Close  Motion  Water Leak Requirements  Power requirements: 120VAC 60Hz power  Mobile device and app requirements... o iOS TBD o Android TBD  HomeKit requirements...  Requirements for voice control...  Wi-Fi requirements...  Bluetooth requirements... Help... Link to installation video... TBD Professional installation service... TBD Contact us (email, phone)... TBD Setup: 1. Download the Vantaa App from Apple App Store or Google Play Store 2. Follow the onscreen instructions for setting up the Bridge: a. Connect power cable to Bridge and plug into a wall outlet i. Note: for best performance avoid power conditioning power strips as this unit uses both radio signals and powerline signals for wireless communication. b. Connect Ethernet cable to Bridge and connect the other end to an available port on your router c. Wait for the LED on the Bridge to turn green d. Follow the app instructions to add the Bridge to the app 3. When finished setting up the Bridge in the app, tap the + button in the Devices tab to add your first Vantaa device Regulatory Statements Certification This device contains licence‐exempt transmitter(s)/receiver(s) that complies with Part 15 of the FCC Rules and Innovation, Science and Economic Development Canada’s licence‐exempt RSS(s). Operation is subject to the following two conditions: 1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage; 2.L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. To maintain the compliance with the FCC's and Canada’s ISED RF exposure guideline, place the unit at least 20 cm (7.9‐ inches) from nearby persons. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15B of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio and television reception. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause such interference, which can be verified by turning the device off and on, the user is encouraged to eliminate the interference by one or more of the following measures: • Re‐orient or relocate the receiving antenna of the device experiencing the interference • Increase the distance between this device and the receiver • Connect the device to an AC outlet on a circuit different from the one that supplies power to the receiver • Consult the dealer or an experienced radio/TV technician. Cet appareil a été testé et s’avère conforme aux restrictions relatives aux équipements numériques de classe B, d’après l’article 15 des règlements du Conseil supérieur de l’audiovisuel américain (FCC). Ces restrictions ont été instaurées pour offrir une protection raisonnable contre les interférences nuisibles au sein d’une installation résidentielle. C…

Text truncated - open the document above for the full version.

Smartlabs, Inc Agent Authorization Company: Smartlabs, Inc Address: 1621 Alton Parkway, Suite 100, Irvine, CA 92606, United States Product Name: Bridge Controller Model Number(s): BC01 Product Description: Bridge Controller We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matter s concerning the certification of above named e quipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to d iscuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: �� Date: 2020/08/24 Name: Title: Director PM, Quality and Support Company: Smartlabs, Inc

Model: BC01 N20190309V1 Photo 1 Photo 2 Model: BC01 N20190309V1 Photo 3 Photo 4 Model: BC01 N20190309V1 Photo 5 Photo 6

Label & Location

Model: BC01 N20190309V1 Photo 1 Photo 2 Model: BC01 N20190309V1 Photo 3 Photo 4 BT/WIFI ANT Model: BC01 N20190309V1 Photo 5 Photo 6 Model: BC01 N20190309V1 Photo 7 Photo 8 902-928MHz ANT Model: BC01 N20190309V1 Photo 9

FCC ID: SBP-BC01 RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) MPE Calculation Method E (V/m) ＝ d GP**30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Average RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 *377 **30 D GP From the EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Measurement Result Operation Frequency: BT: 2402-2480MHz WIFI:2412-2462MHz for 802.11b/g/11n(HT20); 2422-2452MHz for 802.11b/g/11n(HT40) Power density limited: 1mW/ cm 2 Antenna Type: PCB Antenna Antenna gain: 1dBi, R=20cm conducted power Evaluation result Power density Limits (dBm)(mW)(dBi)Numeric 2402 3.14 4±14 2.5121.001.260.00061 2441 4.1 4±14 2.5121.001.260.00061 2480 4.22 4±14 2.5121.001.260.00061 2402 5.38 6±17 5.0121.001.260.00131 2441 6.27 6±17 5.0121.001.260.00131 2480 6.44 6±17 5.0121.001.260.00131 2402 5.77 6±17 5.0121.001.260.00131 2441 6.63 6±17 5.0121.001.260.00131 2480 6.78 6±17 5.0121.001.260.00131 2402 3.89 4±15 3.1621.001.260.00081 2440 4.16 4±15 3.1621.001.260.00081 2480 4.16 4±15 3.1621.001.260.00081 2412 14.83 15±116 39.8111.001.260.01001 2437 15.11 15±116 39.8111.001.260.01001 2462 15.71 15±116 39.8111.001.260.01001 2412 10.57 11.5±112.5 17.7831.001.260.00451 2437 11.29 11.5±112.5 17.7831.001.260.00451 2462 12.25 11.5±112.5 17.7831.001.260.00451 2412 10.37 11.5±112.5 17.7831.001.260.00451 2437 11.07 11.5±112.5 17.7831.001.260.00451 2462 12.01 11.5±112.5 17.7831.001.260.00451 2422 10.63 11±112 15.8491.001.260.00401 2437 11.24 11±112 15.8491.001.260.00401 2452 11.74 11±112 15.8491.001.260.00401 (mW/cm2) Antenna Gain GFSK Max tune-up power Tune-up power (dBm) (dBm) π/4-DQPSK 8-DPSK BLE (mW/cm2 ) 802.11b 802.11g 802.11n20 802.11n40 Channel Freq. (MHz) modulation Conclusion: For the max result : 0.01≤ 1.0 for Max Power Density, compliance RF exposure.. Signature: Date: 2020-09-08 NAME AND TITLE (Please print or type): Alex Li/Manager COMPANY (Please print or type): Shenzhen NTEK Testing Technology Co., Ltd./ 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China.

Report No.: S19092601903002 Version.1.3 Page 1 of 78 RADIO TEST REPORT FCC ID: SBP-BC01 Product: Bridge Controller Trade Mark: TBD Model No.: BC01 Family Model: N/A Report No.: S19092601903002 Issue Date: 08 Nov. 2019 Prepared for Smartlabs, Inc. 1621 Alton Parkway, Suite 100, Irvine, CA 92606, United States Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel.: +86-755-6115 6588 Fax.: +86-755-6115 6599 Website:http://www.ntek.org.cn Report No.: S19092601903002 Version.1.3 Page 2 of 78 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 FREQUENCY HOPPING SYSTEM (FHSS) EQUIPMENT REQUIREMENTS ............................................................................. 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ........................................................................................................... 9 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ....................................................................... 9 6.2 SUPPORT EQUIPMENT............................................................................................................................... 10 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 11 7 TEST REQUIREMENTS .................................................................................................................................... 13 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 13 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 16 7.3 NUMBER OF HOPPING CHANNEL ........................................................................................................... 25 7.4 HOPPING CHANNEL SEPARATION MEASUREMENT ........................................................................... 26 7.5 AVERAGE TIME OF OCCUPANCY (DWELL TIME) ................................................................................ 27 7.6 20DB BANDWIDTH TEST .......................................................................................................................... 29 7.7 PEAK OUTPUT POWER .............................................................................................................................. 30 7.8 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 31 7.9 SPURIOUS RF CONDUCTED EMISSION .................................................................................................. 32 7.10 ANTENNA APPLICATION .......................................................................................................................... 33 7.11 FREQUENCY HOPPING SYSTEM (FHSS) EQUIPMENT REQUIREMENTS .............................................. 34 8 TEST RESULTS ................................................................................................................................................... 35 8.1 DWELL TIME ............................................................................................................................................... 35 8.2 MAXIMUM CONDUCTED OUTPUT POWER........................................................................................... 40 8.3 OCCUPIED CHANNEL BANDWIDTH ....................................................................................................... 45 8.4 CARRIER FREQUENCIES SEPARATION .................................................................................................. 50 8.5 NUMBER OF HOPPING CHANNEL ........................................................................................................... 55 8.6 BAND EDGE ................................................................................................................................................. 56 8.7 CONDUCTED RF SPURIOUS EMISSION .................................................................................................. 69 Report No.: S19092601903002 Version.1.3 Page 3 of 78 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : Smartlabs, Inc. Address ....................................... : 1621 Alton Parkway, Suite 100, Irvine, CA 92606, United States Manufacturer's Name .................. : Smartlabs, Inc. Address ........................................ 1621 Alton Parkway, Suite 100, Irvine, CA 92606, United States Product description Product name .............................. : Bridge Controller Model and/or type reference ..... : BC01 Family Model ............................... : N/A Measurement Procedure Used: APPLICABLE STANDARDS STANDARD/ TEST PROCEDURE TEST…

Text truncated - open the document above for the full version.

FCC ID: SBP-BC01 Radiated Measurement Photos FCC ID: SBP-BC01 Conducted Measurement Photos