SEKGR48Hand held portable terminal

Legal disclaimer and copyrights The information in this guide is subject to change without notice BANKSYS SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE DELIVERY, PERFORMANCE, OR USE OF THIS MATERIAL. NOTHING IN THIS GUIDE SHALL BE CONSTRUED OR INTERPRETED AS AN IMPLIED OBLIGATION ON BANKSYS UNLESS CLEARLY STATED OTHERWISE Reproduction in any manner whatsoever without the written permission of Banksys is strictly forbidden. Trademarks used in this text: C-ZAM/SMASH, the Banksys’s logo, and latitude are trademarks of Banksys. Banksys disclaims any proprietary interest or responsibility in trademarks and trade names other than its own. All private or privacy related information and all corporate protected information or competitive sensitive information in this text should be duly kept confidential. All rights reserved. Product Guide © Banksys (May 2003) C-ZAM/SMASH PORTABLE PRODUCT GUIDE VERSION: DRAFT 1 Table of contents INTRODUCTION ............................................2 GENERAL DESCRIPTION .....................................3 MULTI APPLICATIONS........................................4 M ODULAR DESIGN...........................................4 O PEN ARCHITECTURE........................................4 THE TECHNOLOGY OF SECURITY.................................5 TECHNICAL SPECIFICATIONS ................................5 KEYBOARD................................................5 DISPLAY.................................................6 C ARD READER......................ERROR! BOOKMARK NOT DEFINED. P ROCESSORS..............................................6 MEMORY.................................................7 COMMUNICATION CARDS.......................................7 1. GSM Card (GPRS ready).............................7 2. Local wireless....................................7 2.1 Concept ........................................7 2.2 Access point ...................................9 2.2.1 Dial-Up (PSTN) CTR21 Modem .................9 2.2.2 ISDN adapter ...............................9 EXTERNAL INTERFACES.......................................9 POWER.................................................10 D IMENSIONS.............................................12 WEIGHT (WITHOUT PRINTER)..................................12 ENVIRONMENTAL SPECIFICATIONS...............................12 C OLOUR OF THE TERMINAL..............ERROR! BOOKMARK NOT DEFINED. APPROVALS..............................................12 OPTIONS ................................................13 C-ZAM/SMASH P RINTER....................................13 C-ZAM/SMASH B ATTERY PACK................................14 C-ZAM-SMASH CHARGING STATION............................15 C-ZAM/SMASH C RADLE....................................16 C-ZAM/SMASH ACCESS POINT.............................17 C-ZAM/SMASH PIN PROTECTION..............................18 C-ZAM/SMASH PROTECTION BAG..............................19 GLOSSARY ...............................................20 C-ZAM/SMASH PORTABLE PRODUCT GUIDE VERSION: DRAFT 2 Introduction C-ZAM/SMASH-BASE UNIT Designed with a full range of payment applications in mind, the C-ZAM/SMASH PORTABLE features a modular design for ultimate versatility and a totally open architecture for integration into any existing payment system. C-ZAM/SMASH PORTABLE PRODUCT GUIDE VERSION: DRAFT 3 General description The C-ZAM/SMASH introduces a new generation of payment terminals combining security, open architecture and modularity in a single unit. An ever increasing number of businesses require mobility. Communicating has become absolutely vital, and must transcend time and place. Banksys brings true mobility to the world of card payment terminals using proven technologies such as GSM/GPRS and Blue tooth. The C-ZAM/SMASH PORTABLE brings a new kind of applications which will be very useful in Express delivery, events, field repairs and other mobile businesses but also for other applications like restaurants, small retail configurations, large retail and petrol sector when you can use a portable solution with a limited radius; C-ZAM/SMASH PORTABLE ‘s offer include a GSM/GPRS version and a local wireless version : ‰ The C-ZAM/SMASH/GSM-GPRS is an ideal payment terminal for people constantly on the move. This compact, lightweight, and robust device creates a whole new level of convenience and added value for many professionals just like : • Door-to-door suppliers of everything from fuel to furniture and home appliances can offer their customers the ease of paying by card • Taxi drivers benefit from having to carry less cash which improves their security Furthermore, the additional SMS feature enables the terminal to be used for messaging and GPRS function makes the C-ZAM/SMASH GSM a valuable tool for transferring data or simply because GPRS will be cheaper than GSM . ‰ The C-ZAM/SMASH local wireless with blue tooth communication card provides unconstrained freedom within a range of 328 to 492 feet (100 to 150 meters). Peripherals equipped with Bluetooth communication card are connected to an access point through radio waves. A frequency-hopping scheme minimizes radio interference. As a result, Bluetooth C-ZAM/SMASH PORTABLE PRODUCT GUIDE VERSION: DRAFT 4 guarantees an extremely reliable transmission of data packets. The Banksys C-ZAM/SMASH LOCAL WIRELESS with a Blue tooth communication card is an important addition to the growing range of mobile payment methods. The hassle-free and completely secure Blue tooth technology is ideal for restaurants or small retail outlets. With C-ZAM/SMASH local wireles payments no longer need to be made at the cash register. Multi applications The C-ZAM/SMASH and the C-ZAM/SMASH PORTABLE are designed to perform the full range of terminal applications from card reading to chip programming; As the potential range of applications for smart card expands, so the C- ZAM/SMASH offers t…

Text truncated - open the document above for the full version.

Product Photo/Illustration GR47/GR48 Integrator’s Manual The GR47 described in this manual conforms to the Radio and Telecommunications Terminal Equipment (R&TTE) directive 99/5/EC with requirements covering EMC directive 89/336/EEC and Low Voltage directive 73/23/EEC. The product fulfils the requirements according to 3GPP TS 51.010-1, EN 301 489-7 and EN60950. SAR statement: This product is intended to be used with the antenna or other radiating element at least 20 cm away from any part of the human body. The information contained in this document is the proprietary information of Sony Ericsson Mobile Communications International.
The contents are confidential and any disclosure to persons other than the officers, employees, agents or subcontractors of the owner or licensee of this document, without the prior written consent of Sony
Ericsson Mobile Communications International, is strictly prohibited. Further, no portion of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, without the prior written consent of Sony Ericsson Mobile Communications International, the copyright holder. First edition (May 2003) Sony Ericsson Mobile Communications International publishes this manual without making any warranty as to the content contained herein. Further Sony Ericsson Mobile Communications International reserves the right to make modifications, additions and deletions to this manual due to typographical errors, inaccurate information, or improvements to programs and/or equipment at any time and without notice. Such changes will, nevertheless be incorporated into new editions of this manual. All rights reserved. ©Sony Ericsson Mobile Communications International, 2003 Publication number: LZT 123 7589 R1A Printed in UK " LZT 123 7589 R1A Contents Overview ................................................................................................................... 5 1.Introduction .............................................................................................................. 6 Target Users ................................................................................................................ 6 Prerequisites ................................................................................................................ 6 Manual Structure ......................................................................................................... 6 2.GR47/GR48 Radio Devices ...................................................................................... 7 About the GR47/GR48 Family ................................................................................... 7 Radio Devices in a Communication System ................................................................. 7 Features .......................................................................................................................9 Service and Support ................................................................................................... 12 Precautions ................................................................................................................ 13 3.Abbreviations .......................................................................................................... 14 Integrating the Radio Device ................................................................................ 16 4.Mechanical Description .......................................................................................... 17 Interface Description ................................................................................................. 17 Physical Dimensions.................................................................................................. 18 5.System Connector Interface ................................................................................... 19 Overview ................................................................................................................... 19 General Electrical and Logical Characteristics ............................................................ 22 Grounds .................................................................................................................... 23 VCC - Regulated Power Supply Input ....................................................................... 23 Battery Charging Input (CHG_IN) ........................................................................... 24 Turning the Radio Device ON/OFF and the External Power Signal ........................... 25 Analogue Audio ........................................................................................................ 29 PCM Digital Audio ................................................................................................... 33 Serial Data Interfaces ................................................................................................. 36 SIM Card Related Signals .......................................................................................... 40 Service/Programming ................................................................................................ 41 Buzzer ....................................................................................................................... 42 LED .......................................................................................................................... 42 General Purpose Digital I/O Ports ............................................................................. 43 Extended I/O capabilities .......................................................................................... 44 General Purpose Analogue I/O Ports ......................................................................... 45 External I 2 C Serial Control Bus................................................................................. 48 TX_ON - Burst Transmiss…

Text truncated - open the document above for the full version.

PTCRB Type Approval Update SVN 06 - 6220511-BV (GR48).txt HW/SW Update: Sony Ericsson GR48 (6220511-BV), FCCID: PY76220511, IC: 4170B-6220511, IMEI: 01025700, SW Rev: CXC1122610,CRH1069094_R5B007 (SVN 06) This is to serve as official notice of a Hardware and/or Software Update for the: Manufacturer: Sony Ericsson Model #: GR48 (6220511-BV) Technologies: GSM Frequencies: 850 MHz,1900 MHz FCC ID: PY76220511 Industry Canada #: 4170B-6220511 Previous Hardware Revision: A New Hardware Revision: A Previous Software Revision: CXC1122610, CRH1069094_R5A010 (SVN 01) New Software Revision: CXC1122610,CRH1069094_R5B007 (SVN 06) NAPRD.03_TC Version: V.2.7.2 3GPP TS 51.010 Version: 3GPP TS 51.010-1 V5.6.0 This notification is reported by CETECOM GmbH, a recognized PTCRB test lab. The test results were provided to CTIA on Jan 15, 2004. All appropriate documentation has been reported and filed. Please log onto CTIA's Online Certification Program web site to view a listing of all HW/SW versions of Certified products: http://www.certification.wow-com.com/login Page 1

890 - 915 MHz 1696 MHz Tx GSM 1696 MHz Tx DCS 1712 MHz TX PCS 1444 MHz Rx Dualband: 1286 - 1361 MHz 1445 - 1520 MHz 360 MHz SAW 1805 - 1880 MHz /4 /4 /4 Band selector Power Control & Detector Phase Detect + 90° Loop Filter Dual PLL 360 MHz DCS: 1710 - 1785 MHz PCS: 1850 - 1910 MHz GSM: 890 - 915 MHz Tx LO: GSM: 1314 - 1339 MHz DCS: 1286 - 1361 MHz PCS: 1422 - 1482 MHz Rx LO: GSM: 1295 - 1320 MHz DCS: 1445 - 1520 MHz PCS: 1570 - 1630 MHz Tx I Tx Q Triple-band Phone MTI3100 1710 - 1785 MHz combiner PMB6250 935 - 960 MHz GSM: 424 MHz DCS: 424 MHz PCS: 428 MHz PMB2362 GSM: 424 MHz DCS: 424 MHz PCS: 428 MHz 90° Rx I Rx Q GSM: 424 MHz DCS: 424 MHz PCS: 428 MHz Mobilink Power Control 1805 - 1880 MHz 935 - 960 MHz RF2174 RF2173 Current Sense Battery 1850 - 1910 MHz PCS: 1422 - 1482 MHz 1570 - 1630 MHz PMB2362 Other amp not used. 1930 - 1990 MHz 1930 - 1990 MHz UPG154 RF switch UPG154 RF switch RX I and Q to ML2029 Chip TX I and Q from ML2029 chip

August 4, 2004 CONFIDENTIALITY REQUEST Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Re:Banksys application for Radio Card for Smash or Smash D terminals FCC ID: SEKGR48 Gentlemen: Banksys requests, pursuant to 47CFR 0.459, post grant confidentiality for portions of the material contained in this application such that the identified material will be withheld from public inspection following the grant of this authorization. This material, as indicated by request for confidentiality of the item during the electronic submission process and further identified below, includes: 1. Schematic or circuit diagrams. 2. Block diagram 3. Operational description 4. Parts List Specifically, these exhibits contains information relating to circuit function and complexity that could be of benefit to competitors. The material contains trade secrets and confidential information that Banksys does not customarily release to the public and which is otherwise not generally available to the public. Please contact the undersigned by phone at 410-531-3439, by fax at 410-531-0807, by email at [email protected], or by correspondence at the address below if there are any further questions or additional information needed concerning this filing. Regards, (signed) Phillip Inglis, TRP/Cetecom bvba 14085 Howard Rd. Dayton, MD. 21036

TRP Inc. August 6, 2004 Federal Communications Commission 12th Street SE 3Washington, DC 20554 Gentlemen: Submitted herewith is a request for certification of a GSM pcb card Industry Canada number IFCC ID:SEKGR48 that will be used in hand held terminals, Models Smash and Smash D. The GSM module is manufactured by Sony Ericsson and has been certified as FCC ID:PY76220511. If you have any questions, please call Phillip Inglis at 410 531 3439 or contact via email at [email protected] . It is also requested that you forward copies of any correspondence and authorization documents to the email address specified above. Sincerely, Phillip Inglis Consultant 14085 Howard Rd Dayton, MD 21936

CETECOM ICT Services GmbH Test report no..: 4-1231-01-05/04Date: 2004.04.22Page 43 (53) Photographs of the equipment No.: 01 CETECOM ICT Services GmbH Test report no..: 4-1231-01-05/04Date: 2004.04.22Page 44 (53) Photographs of the equipment No.: 02 CETECOM ICT Services GmbH Test report no..: 4-1231-01-05/04Date: 2004.04.22Page 45 (53) Photographs of the equipment No.: 03 CETECOM ICT Services GmbH Test report no..: 4-1231-01-05/04Date: 2004.04.22Page 46 (53) Photographs of the equipment No.: 04 CETECOM ICT Services GmbH Test report no..: 4-1231-01-05/04Date: 2004.04.22Page 47 (53) Photographs of the equipment No.: 05 CETECOM ICT Services GmbH Test report no..: 4-1231-01-05/04Date: 2004.04.22Page 48 (53) Photographs of the equipment No.: 06

FCC ID label and location The following label will be placed on the metallic edge of the card holder such that it will be visible when the card is installed in the Smash or Smash D unit. The location is shown by the arrow.

CETECOM ICT Services GmbH Test report no..: 4_1231-01-02/04 Issue Date: 2004-02-03 Page 54 (56) Photographs of the equipment CETECOM ICT Services GmbH Test report no..: 4_1231-01-02/04 Issue Date: 2004-02-03 Page 55 (56) Photographs of the equipment CETECOM ICT Services GmbH Test report no..: 4_1231-01-02/04 Issue Date: 2004-02-03 Page 56 (56) Photographs of the equipment

Operation Description: Frequency Range: GSM Band:TX 880.2 MHz to 914.8 MHz RX 925.2 MHz to 959.8 MHz DCS Band:TX 1710.2 MHz to 1784.8 MHz TX 1805.2 MHz to 1879.8 MHz PCS Band:TX 1850.2 MHz to 1909.8 MHz RX 1930.2 MHz to 1989.8 MHz Operation Description: The MTI3100 (or Diana) will operate using the PCMCIA interface. This card is to be used in conjunction with a laptop to connect to any cellular network that supports GSM data, HSCSD, or GPRS (up to class 10). The device will be controlled by using a standard set of AT commands as defined in the GSM specification. The MTI3100 will connect to the laptop using a terminal program or custom customer software. The serial connection in Windows will be setup using 115kbps, no parity, 8 data bits, 1 stop bit, and must use hardware flow control. Circuitry Description: Baseband: The core processor used is a proprietary chip manufactured by Mobilink (ML2029B chip). This processor interfaces with the memory (Flash/SRAM) and contains all of the mixed signal processing used to connect with the RF. Also, the ML2029B chip will interface with the PCMCIA interface directly. TX path: The TX I and Q is generated in ML2029B and is used to modulate an IF VCO to produce a TX IF frequency of 424 MHz for GSM and DCS bands and 428 MHz for PCS bands. This IF frequency will feed a phase-detector that will compare with the mixed down frequency of the TX VCO. The TX VCO is then input directly into the PA module. Power is adjusted through measurement of the PA current and the output power is adjusted appropriately. RX path: The RX is run through a filter, and then input into an LNA. This LNA has a gain adjustment of 20dB and is used to reduce gain for strong input signals. The output of the LNA is input into another filter for reduction of the image. The output of the filter is fed into a mixer for conversion to an IF of 360MHz. This IF frequency is mixed again to I and Q and demodulated by the baseband. Antenna and Ground System: The antenna used will be provided with the PCMCIA card. It is a dual band antenna covering GSM and PCS bands in the US. The ground system is simply devised of two layers in the PCB (layer 2 and layer 5) and will connect throughout the ground of the PCB with vias. This outer casing is stainless steel and through the use of gasket material will form a set of conductive walls that will connect the outer casing to the ground plane of the pcb. Thus the outer casing will be grounded. The system ground will be shared with the host laptop through the 68-pin PCMCIA connector.

Designer : Product : C-ZAM SMASHArticle Number : 7110400000Creation Date : 06/05/03 Status : DraftTitle : GSM MODULE DUAL BAND 900-1800Mhz "GM47"Partlist Number : P546140Revision Date : A PartList Rev : - DEF : 816-812-902 ItemArticleNbrRevDescriptionManufacturerPartNbrRemarksQtyRef 15295122099CAPACITOR_TANTAL_SMD_100UF_20V_20%_CASE D- 7343_(AVX)AVXTPSD-108-M-020-C1 25295710093CAPACITOR_X7R_SMD_100NF_16V_10%_0603_C10 35295733097CAPACITOR_CER_SMD_33PF_50V_5%_0603_NPOC11 45295733097CAPACITOR_CER_SMD_33PF_50V_5%_0603_NPOC12 55295710094CAPACITOR_X7R_SMD_10NF_50V_10%_0603_C15 65295768097CAP SMD 68PF 10% 50V NPO/0603C16 75295710096CAPACITOR_CER_SMD_100PF_50V_5%_0603_NPOC17 85295710095CAPACITOR.X7R.SMD.1nF.50V.10%.0603.C18 95295710095CAPACITOR.X7R.SMD.1nF.50V.10%.0603.C19 105295710093CAPACITOR_X7R_SMD_100NF_16V_10%_0603_C2 115295010010CAPACITOR_TANTALUM LOW ESR_SMD_470UF_6.3V_10%_CASE E (7343-41)VISHAY593D477X96R3E2TC21 5295010010CAPACITOR_TANTALUM LOW ESR_SMD_470UF_6.3V_10%_CASE E (7343-41)AVXTAJ D 477 K 016 RC21 125295010000CAP SMD TANT 100UF 16V E-case Low ESRC22 135295010010CAPACITOR_TANTALUM LOW ESR_SMD_470UF_6.3V_10%_CASE E (7343-41)VISHAY593D477X96R3E2TC23 5295010010CAPACITOR_TANTALUM LOW ESR_SMD_470UF_6.3V_10%_CASE E (7343-41)AVXTAJ D 477 K 016 RC23 145295733096CAPACITOR_CER_SMD_330PF_50V_5%_0603_NPOC25 155295715097CAPACITOR_CER_SMD_15PF_50V_+/- 5%_0603_NPOC26 165295533092CAPACITOR_TANTALUM LOW ESR_SMD_4,7uF_35V_+- 10%_CASE C (6.0x3.2x2.6)_SERIE TPSAVXTPSC475K035R0600C27 175295010010CAPACITOR_TANTALUM LOW ESR_SMD_470UF_6.3V_10%_CASE E (7343-41)VISHAY593D477X96R3E2TC28 5295010010CAPACITOR_TANTALUM LOW ESR_SMD_470UF_6.3V_10%_CASE E (7343-41)AVXTAJ D 477 K 016 RC28 185295710093CAPACITOR_X7R_SMD_100NF_16V_10%_0603_C29 195295710093CAPACITOR_X7R_SMD_100NF_16V_10%_0603_C3 205295710093CAPACITOR_X7R_SMD_100NF_16V_10%_0603_C30 215295710093CAPACITOR_X7R_SMD_100NF_16V_10%_0603_C31 225295710093CAPACITOR_X7R_SMD_100NF_16V_10%_0603_C4 235295710093CAPACITOR_X7R_SMD_100NF_16V_10%_0603_C5 245295710093CAPACITOR_X7R_SMD_100NF_16V_10%_0603_C6 255295710093CAPACITOR_X7R_SMD_100NF_16V_10%_0603_C7 265295710093CAPACITOR_X7R_SMD_100NF_16V_10%_0603_C8 275102000016SEMICOND DD_LOW CAPACITANCE DIODE ARRAY_DALC208SC6_SMD_SOT23-6L_5VSGS THOMSONDALC208SC6D1 285102500009SEMICOND DD_SCHOTTKY BARRIER SINGLE DIODE_BAT54_SMD_SOT23_200mA_30V_PHILIPSBAT54D2 295102500013SEMICOND DD_DIODE_BAS16_SMD_SOT23_500mAPHILIPSBAS16=A6pD4 305102500013SEMICOND DD_DIODE_BAS16_SMD_SOT23_500mAPHILIPSBAS16=A6pD5 315300900011EMC_FILTER W3F15C2238AT1A_SMD 1206_50V DC_22000pF_+50-20%AVXW3F15C2238AT1AFL1 325300900011EMC_FILTER W3F15C2238AT1A_SMD 1206_50V DC_22000pF_+50-20%AVXW3F15C2238AT1AFL2 335300900013EMC_FERRITE BLM11HB102SD_SMD 0603_50mA_100MHz-1GHzMURATABLM11HB102SDL1 345301200025COIL SMD 4U7H SPS N06DL10 355300900013EMC_FERRITE BLM11HB102SD_SMD 0603_50mA_100MHz-1GHzMURATABLM11HB102SDL2 365300900013EMC_FERRITE BLM11HB102SD_SMD 0603_50mA_100MHz-1GHzMURATABLM11HB102SDL3 375300900013EMC_FERRITE BLM11HB102SD_SMD 0603_50mA_100MHz-1GHzMURATABLM11HB102SDL4 385300900013EMC_FERRITE BLM11HB102SD_SMD 0603_50mA_100MHz-1GHzMURATABLM11HB102SDL5 395300900013EMC_FERRITE BLM11HB102SD_SMD 0603_50mA_100MHz-1GHzMURATABLM11HB102SDL6 405300900013EMC_FERRITE BLM11HB102SD_SMD 0603_50mA_100MHz-1GHzMURATABLM11HB102SDL7 415300900013EMC_FERRITE BLM11HB102SD_SMD 0603_50mA_100MHz-1GHzMURATABLM11HB102SDL8 425300900013EMC_FERRITE BLM11HB102SD_SMD 0603_50mA_100MHz-1GHzMURATABLM11HB102SDL9 435107101260OPTO-ELECTRONIC_LED_SMD_SOT23_COLOR GREEN LGS26 (OBSOLETE)LUMEX SSL-LX15GC-TRLED1 445107100260OPTO-ELECTRONIC_LED_SMD_SOT23_COLOR RED LSS260(OBSOLETE)LUMEX SSL-LX15IC-TRLED2 455300500027CONNECTOR_SMD_SIM CARD_6 CONTACTS_P/N 7111S2015X02FCIP/N 7111S2015X02P2 465300500069CONNECTOR_CLASSIC_PINHEADER_F_RIGHT_2X7_2.54mm_B-B_AMP1-0535512-7P3 475103000116SEMICOND DD_MOSFET_Si4412DY_SMD_SO8_30VVISHAYSi4412DY-T1or Si4412aDY-T1Q1 485103000116SEMICOND DD_MOSFET_Si4412DY_SMD_SO8_30VVISHAYSi4412DY-T1or Si4412aDY-T1Q2 495246500005RESISTOR_SMD_0.125W_0.033 OHMS_1%_0805FARNELL156_085R15 505246715002RES SMD 1% 0.063W 15K /0603R16 515246700104RESISTOR_SMD_0.063W_33K_5%_0603R17 525246500019RESISTOR_SMD_0.063W_10K_5%_0603R18 535246500029RESISTOR_SMD_0.063W_100K_5%_0603R19 545246500029RESISTOR_SMD_0.063W_100K_5%_0603R20 555246500029RESISTOR_SMD_0.063W_100K_5%_0603R21 565246500029RESISTOR_SMD_0.063W_100K_5%_0603R22 575246500019RESISTOR_SMD_0.063W_10K_5%_0603R24 585246500019RESISTOR_SMD_0.063W_10K_5%_0603R25 595246500019RESISTOR_SMD_0.063W_10K_5%_0603R26 605246700104RESISTOR_SMD_0.063W_33K_5%_0603R27 615246700104RESISTOR_SMD_0.063W_33K_5%_0603R28 625246700104RESISTOR_SMD_0.063W_33K_5%_0603R29 635246500029RESISTOR_SMD_0.063W_100K_5%_0603R3 645246500034RESISTOR_SMD_0.063W_330E_5%_0603R30 655246500034RESISTOR_SMD_0.063W_330E_5%_0603R31 SOURCES banksys Printed on : 13/05/03 on 8:56 1 / 2 BOM-7110400000-A.xls - GM47 ItemArticleNbrRevDescriptionManufacturerPartNbrRemarksQtyRef 665246500029RESISTOR_SMD_0.063W_100K_5%_0603R4 675246500029RESISTOR_SMD_0.063W_100K_5%_0603R5 685246500029RESISTOR_SMD_0.063W_100K_5%_0603R6 695103807002TRS SMD 2N7002T1 705103807002TRS SMD 2N7002T2 715103807002TRS SMD 2N7002T4 725101000025SEMICOND IC_QUAD BUFFER/DRIVE DRIVER_ 74LVC125ADB_SMD_SSOP14_3.3V_5V TOLERANT I/O & 3-STATEPHILIPS74LVC125AU3 735101000052SEMICOND IC_SWITCHING REGULATOR_LTC1435AIS_SMD_SO16_3.5V TO 30VLINEAR TECHNOLOGIESLTC1435AISU4 745300500124CONNECTOR_LOW PROFILE SOCKETS_SMD_FEMALE_STRAIGHT_2x30 POS_PITCH 1,27MM__SAMTECCLP-130-02-F-DU5 755102000014SEMICOND DD_SCHOTTKY BARRIER RECTIFIER_MBRS140T3_SMD_SMA_0.55V-1AMOTOROLAMBRS140T3Z1 763031300146MECHANICAL_C-ZAM/SMASH_GSM ANTENNA GROUND PLANE_B3130114_TIN PLATTED IRON 0.5MM_ 763031300153MECHANICAL_C-ZAM/SMASH_GSM SHIELDING ISOLATOR _B4130047 7853016005461PCB NUDE_C-ZAM SMASH_GSM MODULE DUAL BAND_546.X_( 900-1800MHz and 850-1900MHz)PCB 795301522108ELECTROMECHANICAL_GSM MODULE DUAL BAND_900/1800MHZ___SONY ERICSONGM47MOD1 805301400447CABLE_447_MCX JACK PCB SMD_MMCX PL…

Text truncated - open the document above for the full version.

PCTEST ENGINEERING LABORATORY, INC. 6660 – B Dobbin Road • Columbia, MD 21045 • USA Telephone 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com (email: [email protected]) CERTIFICATE OF COMPLIANCE (SAR EVALUATION) PCTEST SAR TEST REPORT FCC Measurement Report Reviewed by: Quality Manager SAR Filename: SAR.230407180.SAB Test Dates: May 8-9, 2003 EUT Type: Dual-Band GSM Terminal Model: SMASH Page 1 of 20 © 2003 PCTEST Engineering Laboratory, Inc. APPLICANT NAME & ADDRESS: DATE & LOCATION OF TESTING: S.A. Banksys N.V. Dates of Tests: May 8-9, 2003 Chaussée de Haecht, 1442 Haachtsesteenweg Test Report S/N: SAR.230407180.SAB Bruxelles 1130, Brussel, Belgium Test Site: PCTEST Lab, Columbia, MD USA Attn: Carl Van Himbeeck, Group Manager Terminal Platform Development Model: SMASH APPLICANT NAME: S.A. BANKSYS N.V. EUT Type: Dual-Band GSM Tx Frequency: 824.20 – 849.80 MHz (GSM)/ 1850.20 – 1909.80 MHz (PCS) Rx Frequency: 869.20 – 894.80 MHz (GSM) / 1930.20 – 1989.80 MHz (CDMA PCS) Max. RF Output Power: 29.330 dBm (GSM); 29.951 dBm (PCS) Max. SAR Measurement: 1.14 W/Kg over 1 gram (0.49 W/kg over 10 gms) (GSM Body SAR) 0.91 W/Kg over 1 gram (0.67 W/kg over 10 gms) (PCS Body SAR) Trade Name/Model(s): Banksys/ SMASH FCC Standard(s): §2.1093; FCC/OET Bulletin 65 Supplement C [July 2001] Test Device Serial No.: Identical Prototype [S/N: #48] This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in IEEE/ANSI Std. C95.1-1992 Guidelines and had been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE Std. P1528 D1.2 (April 2003). I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Grant Conditions: Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body- worn operating configuration is based on a separation distance of 0 cm between the back of the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. PCTEST certifies that no party to this application has been denied the FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. PCTEST SAR TEST REPORT FCC Measurement Report Reviewed by: Quality Manager SAR Filename: SAR.230407180.SAB Test Dates: May 8-9, 2003 EUT Type: Dual-Band GSM Terminal Model: SMASH Page 2 of 20 © 2003 PCTEST Engineering Laboratory, Inc. TABLE OF CONTENTS 1. INTRODUCTION / SAR DEFINITION.......................................................................................3 2. SAR MEASUREMENT SETUP.....................................................................................................4 3. ALIDX-500 E-FIELD PROBE SYSTEM.........................................................................................5 4. PROBE CALIBRATION PROCESS..............................................................................................6 5. PHANTOM & EQUIVALENT TISSUES.......................................................................................7 6. TEST SYSTEM SPECIFICATIONS................................................................................................8 7. DOSIMETRIC ASSESSMENT & PHANTOM SPECS....................................................................9 8. DEFINITION OF REFERENCE POINTS....................................................................................10 9. TEST CONFIGURATION POSITION.......................................................................................11 10. ANSI/IEEE C95.1 - 1992 RF EXPOSURE LIMITS.......................................................…

Text truncated - open the document above for the full version.