SLE-ZB-DCU3-TSub-1G communication module

Moxa Industrial Sub-1G Module ZB-DCU3-T, ZB-PM3-T, ZB-WAN1-T User’s Manual First Edition, August 2014 www.moxa.com/product © 2014 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. Moxa Industrial Sub-1G Module ZB-DCU3-T, ZB-PM3-T, ZB-WAN1-T User’s Manual The software described in this manual is furnished under a license agreement and may be used only in accordance with the terms of that agreement. Copyright Notice © 2014 Moxa Inc. All rights reserved. Trademarks The MOXA logo is a registered trademark of Moxa Inc. All other trademarks or registered marks in this manual belong to their respective manufacturers. Disclaimer Information in this document is subject to change without notice and does not represent a commitment on the part of Moxa. Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the products and/or the programs described in this manual, at any time. Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for its use, or for any infringements on the rights of third parties that may result from its use. This product might include unintentional technical or typographical errors. Changes are periodically made to the information herein to correct such errors, and these changes are incorporated into new editions of the publication. Technical Support Contact Information www.moxa.com/support Moxa Americas Moxa China (Shanghai office) Toll-free: 1-888-669-2872 Toll-free: 800-820-5036 Tel: +1-714-528-6777 Tel: +86-21-5258-9955 Fax: +1-714-528-6778 Fax: +86-21-5258-5505 Moxa Europe Moxa Asia-Pacific Tel: +49-89-3 70 03 99-0 Tel: +886-2-8919-1230 Fax: +49-89-3 70 03 99-99 Fax: +886-2-8919-1231 Table of Contents 1. Introduction ........................................................................................................ 1-1 Overview .................................................................................... 1-2 Features ..................................................................................... 1-2 Specifications ............................................................................ 1-2 2. Getting Started .............................................................................................. 2-1 Module Layout ............................................................................ 2-2 Block Diagram ............................................................ 2-2 Connector Locations ................................................................. 2-3 Hardware Installation ............................................................. 2-3 Software Installation ........................................................... 2-3 A. Regulatory Statements............................................................................. A-1 1 1. Introduction The following topics are covered in this chapter: ᇫ Overview ᇫ Features ᇫ Specifications Overview Moxa Sub-1G module(ZB-DCU3-T, ZB-PM3-T, ZB-WAN1-T) uses ATMEL wireless microcontroller which provides a comprehensive solution with large memory(256KB Flash and 16KB SRAM), high CPU and radio performance and all RF components included. The module is a range of ultra low power, high performance surface mount modules targeted at Sub-1G networking applications, enabling users to realize products with minimum time to market and at the lowest cost. Sub-1G module(ZB-DCU3-T, ZB-PM3-T, ZB-WAN1-T) can implement networking stacks, such as ZigBee, as well as customer applications Note: * The Sub-1G module will implement into Moxa System’s DCU and CFE/Protecsa’s Smart Meter application. So, it should follow Moxa System’s DCU-8620-T specification and CFE/Protecsa AMI specification that provided by CFE company. Features • Support SCM setting • Support upgrade firmware over the AIR • Support AES-128 compatible encryption • Support large packets fragmentation • Support Mesh topology Specifications Sub-1G Interface Internal Memory: 256KB Flash : 256KB. SRAM: 16KB RF Standard: IEEE 802.15.4 Frequency Band: 769 ~ 935 MHz RF Data Rate: 20 ~ 40 Kbps (BPSK modulation) RF Channel: 10 channel Tx Power: +10 dBm Rx sensitivity: -110 dBm Distance: 900M Serial Communication Parameters UART Baud Rate: 50 bps to 115.2K Kbps Power Requirement Power consumption: RX：26 mA TX：110 mA Operating Supply Voltage: 3.3 V Environmental Limits Operating Temperature: -40 to 75°C (-40 to 167°F) Operating Humidity: 5 to 95% RH Storage Temperature: -40 to 85 °C (-40 to 185°F) Physical Characteristics Dimension: ZB-DCU3-T/ZB-WAN1-T (48x30x1.6mm), ZB-PM3-T (45x38x1.6mm) Standard and Certifications EMC: CE (EN55022 and EN55024 Class A), FCC Part 15 Subpart B Class A Reliability Automatic Reboot Trigger: Built-in WDT (watchdog timer) MTBF (meantime between failures): Over 10 years Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty 2 2. Getting Started This chapter covers the module layout, and block diagram, hardware installation of the Sub-1G module. Software installation is covered in the next chapter. ᇫ Module Layout ᇫ Block Diagram ᇫ Connector Locations ᇫ Hardware Installation ᇫ Software Installation Module Layout ZB-DCU3-T, ZB-WAN1-T + ZB-PM3-T + Block Diagram = = PIN Define ZB-DCU3-T, ZB-WAN1-T PIN Number PIN Function PIN Number PIN Function 1 3.3V 2 3.3V 3 GND 4 GND 5 GND 6 GND 7 NC 8 NC 9 NC 10 NC 11 RXD 12 NC 13 TXD 14 NC 15 NC 16 NC 17 NC 18 NC 19 NC 20 RESET ZB-PM3-T PIN Number PIN Function 1 VCC 2 TXD 3 RXD 4 RST 5 NC 6 GND 7 GND Hardware Installation The Sub-1G Module can be installed into Moxa DCU-8620-T Embedded Computer system and Power Meter. Steps for Installation on DCU 1. Attach the WLAN antenna to connector UI. 2. Let Sub-1G Module(ZB-DCU3-T and ZB-WAN1-T) connect to DCU-8620-T. 3. Screw on the Sub-1G Module Steps for Installation on Power Meter 1. Let Sub…

Text truncated - open the document above for the full version.

MOXA INC. 4F, NO. 135. LANE 235, BAOQIAO RD., XINDIAN DIST., NEW TAIPEI CITY, TAIWAN Date:2014-08-29 FCC ID: SLE-ZB-DCU3-T To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request 㻌 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram 㻌 The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. 㻌 The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. 㻌 Sincerely yours, ----------------------------------- Name/ Title: Lea-Ming Tseng/ Manager Phone: 886-2-8919-1230 Fax: 886-2-8919-1231 E-mail: [email protected]

MOXA INC. 4F, NO. 135. LANE 235, BAOQIAO RD., XINDIAN DIST., NEW TAIPEI CITY, TAIWAN Date:2014-08-29 FCC ID: SLE-ZB-DCU3-T AUTHORIZATION LETTER To whom it may concern: We, the undersigned, hereby authorize Andrea Hsia, Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out byAndrea Hsia, Senior Specialist of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. ! If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------- Name/ Title: Lea-Ming Tseng/ Manager Phone: 886-2-8919-1230 Fax: 886-2-8919-1231 E-mail: [email protected] 㻌

FCC ID: SLE-ZB-DCU3-T Report No.: RF140819C27 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch October 13, 2014 Dear Application Examiner, MOXA INC. It’s a Sub-1G communication module, FCC ID: SLE-ZB-DCU3-T would like to have your authorization as a modular device. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.”: The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip ATXMEGA256A3U. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is ATXMEGA256A3U. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: SLE-ZB-DCU3-T Report No.: RF140819C27 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Robert Huang Senior Engineer Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

Page 3 Page 4

FCC ID: SLE-ZB-DCU3-T Report No.: RF 140819C24 OPERATIONAL DESCRIPTION The transmitter of the EUT (Sub-1G communication module) is powered from 3.3Vdc. The antenna is Dipole antenna with I-PEX antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: SA140819C27 1 of 5 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA140819C27 MODEL NO.: ZB-DCU3-T FCC ID: SLE-ZB-DCU3-T RECEIVED: Aug. 19, 2014 TESTED: Sep. 22 ~ Oct. 01, 2014 ISSUED: Oct. 06, 2014 APPLICANT: MOXA INC. ADDRESS: 4F, NO. 135. LANE 235, BAOQIAO RD., XINDIAN DIST., NEW TAIPEI CITY, TAIWAN ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification Report No.: SA140819C27 2 of 5 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD .............................................................................................. 3 1. CERTIFICATION ........................................................................................................... 4 2. RF EXPOSURE ............................................................................................................ 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ...................................... 5 2.2 MPE CALCULATION FORMULA.................................................................................. 5 2.3 CLASSIFICATION ........................................................................................................ 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ............................... 5 Report No.: SA140819C27 3 of 5 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140819C27 Original release Oct. 06, 2014 Report No.: SA140819C27 4 of 5 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT:Sub-1G communication module MODEL NO.:ZB-DCU3-T BRAND: MOXA APPLICANT:MOXA INC. TESTED:Sep. 22 ~ Oct. 01, 2014 TEST SAMPLE:ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment (model: ZB-DCU3-T) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Oct. 06, 2014 Pettie Chen / Senior Specialist APPROVED BY : , DATE :Oct. 06, 2014 Ken Liu / Senior Manager Report No.: SA140819C27 5 of 5 Report Format Version 5.0.0 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Calculation result of maximum conducted power MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 10.63 1.5 20 0.0032 1 ---END---

Report No.: RF140819C27 1 of 45 Report Format Version 5.2.1 FCC TEST REPORT REPORT NO.: RF140819C27 MODEL NO.: ZB-DCU3-T FCC ID: SLE-ZB-DCU3-T RECEIVED: Aug. 19, 2014 TESTED: Sep. 22 ~ Oct. 01, 2014 ISSUED: Oct. 06, 2014 APPLICANT: MOXA INC. ADDRESS: 4F, NO. 135. LANE 235, BAOQIAO RD., XINDIAN DIST., NEW TAIPEI CITY, TAIWAN ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140819C27 2 of 45 Report Format Version 5.2.1 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 4 1. CERTIFICATION ............................................................................................................ 5 2. SUMMARY OF TEST RESULTS .................................................................................... 6 2.1 MEASUREMENT UNCERTAINTY .................................................................................. 6 3. GENERAL INFORMATION ............................................................................................. 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................... 7 3.2 DESCRIPTION OF TEST MODES ................................................................................. 7 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................. 8 3.3 DUTY CYCLE OF TEST SIGNAL ................................................................................. 10 3.4 DESCRIPTION OF SUPPORT UNITS .......................................................................... 11 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................... 11 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................................. 12 4. TEST TYPES AND RESULTS ...................................................................................... 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ....................................... 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................... 13 4.1.2 TEST INSTRUMENTS .................................................................................................. 14 4.1.3 TEST PROCEDURES .................................................................................................. 15 4.1.4 DEVIATION FROM TEST STANDARD ........................................................................ 15 4.1.5 TEST SETUP ................................................................................................................ 16 4.1.6 EUT OPERATING CONDITIONS ................................................................................. 16 4.1.7 TEST RESULTS ........................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................... 26 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................................. 26 4.2.2 TEST INSTRUMENTS .................................................................................................. 26 4.2.3 TEST PROCEDURES .................................................................................................. 27 4.2.4 DEVIATION FROM TEST STANDARD ........................................................................ 27 4.2.5 TEST SETUP ................................................................................................................ 27 4.2.6 EUT OPERATING CONDITIONS ................................................................................. 27 4.2.7 TEST RESULTS ........................................................................................................... 28 4.3 6dB BANDWIDTH MEASUREMENT ............................................................................ 34 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ......................................................... 34 4.3.2 TEST SETUP ................................................................................................................ 34 4.3.3 TEST INSTRUMENTS .................................................................................................. 34 4.3.4 TEST PROCEDURE ..................................................................................................... 34 4.3.5 D…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 3 RADIATED EMISSION TEST 4