SNN300WXWireless Conference Phone

The Konftel 300Wx User Guide ENGLISH B OmniSound ® HD – Optimal sound By incorporating full duplex audio, the patented audio technology OmniSound ® guarantees the audio conference an impressive and crystal clear sound in both directions through a hypersensitive microphone with 360° sound pickup and speakers that provide powerful sound distribution to all participants. OmniSound ® HD offers HD audio transmission for VoIP calls. In addition features like echo cancellation, background noise suppression which minimizes distracting background noise and an equalizer for personal adjustment of the sound’s various characteristics are also included. Move freely around the room, talk, discuss and debate while retaining great sound quality that is entirely free from irritating sound clipping, damping or echoes. It’s as close as you can get to natural sound. DECT conforms to the GAP standard DECT – Digital Enhanced Cordless Telephone. DECT incorporates encryption for maximum call security. GAP (Global Access Profile) ensures the interoperability of DECT equipment of different manufacturers. product is in compliance with Annex V of the Directive 1999/5/EC (R&TTE) and complies with the requirements set out in the Council Directives 2004/108/EC, 2006/95/EC and with Directive 2011/65/EU (ROHS). See www.konftel.com/doc for a complete declaration. Warning! Do not expose the Konftel 300Wx, charging stand or batteries to water or moisture. Warning! Do not open the casing of the Konftel 300Wx. Warning! Only use the power adapter provided to connect the unit to the mains. Warning! Only use the battery provided or a Konftel-recommended replacement battery. Warning! Do not attempt to open or modify the battery. Warning! Extreme heat, short-circuiting or any attempt to modify the battery may cause it to ignite or explode. 1 TABLE OF CONTENTS Description 2 General ..................................................2 Maintenance ..........................................2 Keypad ..................................................4 Display screen ........................................5 Navigation and selection in menus ...........6 General 7 Unpacking .............................................7 Connecting and installing the unit ............8 Select connectivity option ........................9 Using a computer ...................................9 Switching of Konftel 300Wx ...................10 Recharging batteries ..............................11 Connect to a DECT system 12 Registration ..........................................12 Answering and making calls 14 Answering calls......................................14 Making calls ..........................................14 Making three-way calls (DECT) ................15 VoIP calls via a computer ........................15 Calls via mobile phones ..........................16 During a call 17 Adjusting the speaker volume ..................17 Muting the microphone ..........................17 Placing a call on temporary hold .............17 Ending calls ..........................................17 Switching connections during calls ..........18 Conference guide 19 Creating conference groups.....................19 Making conference group calls ................19 Making a temporary conference group call (multi-party call) using the Instant Guide 20 Displaying conference group participants 20 Editing conference groups ......................21 Deleting conference groups .....................21 Delete all conference groups ...................21 Conference guide settings .....................22 Displaying conference guide status .........22 Phonebook 23 Searching for contacts ..........................23 Adding contacts ...................................23 Editing contacts ...................................23 Deleting contacts ...................................24 Deleting all contacts ..............................24 Displaying phonebook status ...................24 Recording 25 Starting a recording ..............................25 Mute function .......................................25 Hold ....................................................25 Ending a recording ................................25 Listening to a recording .........................26 Managing recordings .............................27 Adjusting the recording indicator ............27 Displaying recording feature status .........27 Settings 28 DECT...................................................28 Apperance ...........................................29 Date and time ......................................29 Sound .................................................30 Sleep mode ...........................................31 Software ...............................................31 Checking status .....................................31 Upgrading software 32 Upgrading from a PC.............................32 Technical specifications 33 Konftel DECT base station (accessories) .34 Service and guarantee 35 2 DESCRIPTION GENERAL The Konftel 300Wx is a battery-driven wireless conference phone that can be connected to DECT systems, mobile phones or PCs. It can be connected to a Konftel DECT base station or any GAP-compatible DECT system. The conference phone has a host of innovative features: • A fully wireless unit that provides talk time of up to 48 hours without having to recharge. • OmniSound ® HD audio technology. • USB connectivity allows the phone to be used to make VoIP calls. • The connectivity menu enables you to combine and switch easily between connectivity technologies – DECT, USB, mobile. • Conference guide for easy set-up of multiparty calls. • Record your meetings with an SD memory card so that you can listen to them later on. • Expansion microphones can be added to increase the voice pickup range. (Optional.) • Can be upgraded with smart features, making it future-proof. • Two-year guarantee. MAINTENANCE Clean the equipment with a soft, dry cloth. Never use liquids. 3 DESCRIPTION Battery Expa…

Text truncated - open the document above for the full version.

Industry Canada warnings This product meets the applicable Industry Canada technical specifications. / Le présent matériel est conforme aux specifications techniques applicables d’Industrie Canada. The Ringer Equivalence Number (REN) is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five. / L’indice d’équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être raccordés à une interface téléphonique. La terminaison d’une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas cinq.This product has a Ringer Equivalence Number of 0.1 / Ce produit a une équivalence de la sonnerie Nombre de 0,1. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Privacy of communications may not be ensured when using this telephone. / Les communications effectuées au moyen de cet appareil ne sont pas nécessairement protégées des indiscrétions. CAN ICES-3 (B)/NMB-3(B) FCC Compliance statements This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: 5RWW401BDECTBASE. If requested, this number must be provided to the telephone company. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. [For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US: 5RWW401BDECTBASE. The digits represented by 01 are the REN without a decimal point (e.g., 01 is a REN of 0.1). For earlier products, the REN is separately shown on the label.] Notice: If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this unit does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. Notice: According to telephone company reports, AC electrical surges, typically resulting from lightning strikes, are very destructive to telephone equipment connected to AC power sources. To minimize damage from these types of surges, a surge protector is recommended. An applicable certification jacks Universal Service Order Codes (USOC) for the equipment is provided in the packaging with each piece of approved terminal equipment. If trouble is experienced with this equipment (Konftel Dect Base Station), for repair or warranty information, please contact Konftel Inc., Phone: +1-(866)-606-4728. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. If this equipment (Konftel Dect Base Station) causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. This equipment complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation. This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits provide reasonable protection against radio and TV interference in a residential area. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the radio or TV. • Use outlets on different elec…

Text truncated - open the document above for the full version.

2013- 06-25 Equipment Autorisa tion Divisi on Federal Communications Commissi on 7435 Oakl and Mills Road Columbia, MD 21046 FCC ID: SNN300WX Product Name: Konftel 300Wx Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: • Schematics • Block diagram • Operational Desc ription These materials contain trade secrets and proprietary information and are not cu stomarily released to the public. The public disclosure of this information might be harmful to the co mpany and provide unjustified benefits to our competitors. Dated: June 25 2013 By: Tommy Edlund Signature Printed Title: Product Manager On behalf of : Konftel AB Telephone: +46 90 70 64 81

Stefan Andersson 2013-09-03D 1(1)130228-61-001 Label: Product, 300Wx, bottom housing Color: Color print on white label Type of label: Coated matte polyester label with strong glue - recycling compatible (3M 8000) 43.2 mm R3 mm 27.5 mm MN: Konftel 300Wx Support: www.konftel.com 3171853 FCC ID: SNN300WX IC: 2408A-300WX Made in China Release Notice Subject:Part No.: Rev.:B Doc. No.: #### Project Code: 91.6F409.001Release Date: Page 7 of 12 #### * Label location for machine 标签粘贴位置 #REF! #REF! Connections label(来料贴好) 13022661001-A$01 Product ID label 13005361001-C$01 IPEI label 13006861001-A$01 Connections label(来料贴好) 13022761001-A$01 FCC label (来料贴好) 13005461001-C$01 Product label (来料贴好) 13022861001-B$01 Instruction label (来料贴好) 13005761001-C$01 B

- Page 1 of 8 - Photographs Order No. 235343 Internal view, top enclosure Internal view, top enclosure - Page 2 of 8 - Photographs Order No. 235343 Main PCB, top side Main PCB, rear side - Page 3 of 8 - Photographs Order No. 235343 Ni-MH battery on main PCB LED PCB with light guide - Page 4 of 8 - Photographs Order No. 235343 LED PCB top side, light guide removed LED PCB rear side - Page 5 of 8 - Photographs Order No. 235343 Keypad PCB top side Keypad PCB rear side - Page 6 of 8 - Photographs Order No. 235343 Internal view, bottom enclosure Battery PCB rear side - Page 7 of 8 - Photographs Order No. 235343 Battery PCB top side Charging cradle, internal view - Page 8 of 8 - Photographs Order No. 235343 Charging cradle, internal PCB

Prediction of MPE limit at a given distance S = power density P = power input to the antenna G = antenna gain R = distance Conducted output power:19.0(dBm) Tune up tolerance0.00(dB) Number of carriers1(N) 79(mW) 0(W) Antenna gain:-1.9(dBi) Maximum antenna gain:0.65(numeric) EIRP0.051(W) ERP0.031(W) Distance:20(cm) Duty Cycle:100(%) Frequency:1920(MHz) MPE Limit:1.000(mW/cm^2) Power density:0.010(mW/cm^2) 0.10(W/m^2) Margin19.9(dB) 2 4R PG S p =

Report No. 235343-6 Template version: B Nemko Norway Nemko AS, Instituttveien 6, P.O. Box 96 Kjeller, 2007 Kjeller, Norway TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected] ENTERPRISE NUMBER NO974404532 nemko.com/no Test Report Product UPCS Conference Telephone Name and address of the applicant Konftel AB Box 268 SE-90106 Umeå, Sweden Name and address of the manufacturer Same as above Model Konftel 300Wx Rating / Trademark Konftel Serial number 61A0310023 Additional information / Tested according to FCC Part 15, subpart D Isochronous UPCS Device, 1920 – 1930 MHz Industry Canada RSS 213, Issue 2 2 GHz License-exempt Personal Communications Service Devices (LE-PCS) Order number 235343 Tested in period 2013.04.12 to 2013.09.10 Issue date 2013.11.18 Name and address of the testing laboratory Instituttveien 6 Kjeller, Norway FCC No: 994405 IC OATS: 2040D-1 TEL: (+47) 22 96 03 30 FAX: (+47) 22 96 05 50 Prepared by [Frode Sveinsen] Approved by [Thanh Tran] This report shall not be reproduced except in full without the written approval of Nemko. Opinions and interpretations expressed within this report are not part of the current accreditation. This report was originally distributed electronically with digital signatures. For more information contact Nemko. TEST REPORT FCC part 15D Report no.: 235343-6 FCC ID: SNN300WX Nemko Norway, Instituttveien 6, Kjeller, Norway Page 2 (50) CONTENTS 1 INFORMATION ................................................................................................................................. 3 1.1 Tested Item........................................................................................................................................ 3 1.2 Description of Tested Device ............................................................................................................. 3 1.3 Exposure Evaluation .......................................................................................................................... 3 1.4 Test Environment .............................................................................................................................. 4 1.5 Test Engineer(s) ................................................................................................................................ 4 1.6 Test Equipment ................................................................................................................................. 4 1.7 Other Comments ............................................................................................................................... 4 2 TEST REPORT SUMMARY .............................................................................................................. 5 2.1 General .............................................................................................................................................. 5 2.2 Test Summary ................................................................................................................................... 6 3 TEST RESULTS ................................................................................................................................ 7 3.1 Power Line Conducted Emissions ..................................................................................................... 7 3.2 Coordination with fixed microwave .................................................................................................. 10 3.3 Digital Modulation Techniques ........................................................................................................ 10 3.4 Labeling Requirements ................................................................................................................... 10 3.5 Antenna Requirement...................................................................................................................... 11 3.6 Channel Frequencies ...................................................................................................................... 11 3.7 Automatic Discontinuation of Transmission .................................................................................... 12 3.8 Peak Power Output ......................................................................................................................... 13 3.9 Emission Bandwidth B ..................................................................................................................... 18 3.10 Power Spectral Density ................................................................................................................... 21 3.11 In-Band Unwanted Emissions, Conducted ...................................................................................... 24 3.12 Out-of-band Emissions, Conducted................................................................................................. 26 3.13 Carrier Frequency Stability .............................................................................................................. 30 3.14 Frame Repetition Stability ............................................................................................................... 31 3.15 Frame Period and Jitter ................................................................................................................... 31 3.16 Monitoring Threshold, Least Interfered Channel ............................................................................. 33 3.17 Threshold Monitoring Bandwidth ..................................................................................................... 35 3.18 Reaction Time and Monitoring Interval ............................................................................................ 36 3.19 Time and Spectrum Window Access Procedure ............................................................................. 38 3.20 Acknowledgements and Transmission Duration .....................................................................…

Text truncated - open the document above for the full version.

FCC ID: SNN300WX Project no.: 235343 Page 1 of 1 PHOTOS OF TEST SET-UP Power line Conducted Emissions Test