SPEBTSS2B1A1XBluetooth stereo Speakerphone

SKU#: VS37W/2 Description: Bluetooth Speaker Editor: Xue feng Sun Approved by: Henry Chen Version: 1.0 Page: 1/1 3B02 & 3B03, No.5, Hsin-Yi Rd., Sec. 5, Taipei 11011, Taiwan, R. O. C. Tel: 886 2 27223333 Fax: 886 2 27225050 www.celltrend.com.tw Bluetooth Mini Stereo Speakerphone User Manual 3 7 8 9 1 Battery Replacement & Bracket Mounting – 2 Way SKU#: VS37W/2 Description: Bluetooth Speaker Editor: Xue feng Sun Approved by: Henry Chen Version: 1.0 Page: 2/2 3B02 & 3B03, No.5, Hsin-Yi Rd., Sec. 5, Taipei 11011, Taiwan, R. O. C. Tel: 886 2 27223333 Fax: 886 2 27225050 www.celltrend.com.tw About Bluetooth Mini Stereo Speakerphone #BTS-S2B1X ?Smallest size with built-in A2DP & AVRCP gives you powerful audio streaming in stereo quality you’ve never dreamed of. ?Built-in D.S.P. for echo cancellation and noise suppression gives you impeccable call quality. ?Auto switching between calls and music streaming. ?Dual capacity of desk-top use like a conference phone and in car use like a hands-free car kit keeps your calls and music on the move. About Bluetooth Technology Bluetooth wireless technology is set to revolutionize the personal connectivity by providing freedom from wired connections-enabling links and connectivity between mobile computers, mobile phones, portable handheld devices and other Bluetooth enables devices within 10 meters. Utilizing global sound & digital data 2.4G ISM transmission. It makes global communication in the way you've never dreamed of! Getting to Know Your Mini Stereo Speakerphone Getting Started To use your speakerphone, please follow these simple steps: (a) Charge your speakerphone. Prior to using the speakerphone, it is recommendable to charge the battery fully for the first time use. (b) Connect the charger to an AC wall outlet and the charge plug to speakerphone’s charging socket. After completion of charge, please remove the chargers from speakerphone and outlet. (c) Place your speakerphone and a Bluetooth-enabled handset (or audio device) no more than 1 meter apart for pairing. (d) Ensure your speakerphone and handset (or audio device) is within 10 meters - Bluetooth sensing distance. Important: (a) Charge time: Normal full charge time is 2 to 3 hrs. (Approx.). (b) Charge indication: When charge is in process, the LED will flash red. When charge is completed, the LED will flash off. (c) Low voltage indication: Whenever low battery power is encountered, you may hear two beeps every 30 seconds from speakerphone with LED flashes red. It’s recommended to charge the speakerphone immediately to prolong durability & standby time of battery. Under low voltage status, if the battery is not charged within certine time (15 minutes approx.), the speakerphone will be powered off. Turning On/Off the Speakerphone SKU#: VS37W/2 Description: Bluetooth Speaker Editor: Xue feng Sun Approved by: Henry Chen Version: 1.0 Page: 3/3 3B02 & 3B03, No.5, Hsin-Yi Rd., Sec. 5, Taipei 11011, Taiwan, R. O. C. Tel: 886 2 27223333 Fax: 886 2 27225050 www.celltrend.com.tw Turning On: Speakerphone is under off mode: (a) Switch on the power switch. (b) Press and hold the MFB until the LED flashes on blue. Release the MFB. Mean while you may hear a beep from the speaker. (c) Speakerphone will be under standby mode. Turning Off: Speakerphone is not under off mode: (a) Press and hold the MFB until you hear a beep from the speakerphone. Release the MFB. Mean while the LED will first flash on red for 3 seconds, then flashes off. You may also turn off the power switch to power off the speakerphone. (b) Speaker will be off. A1) Pairing to a Mobile Handset Prior to using the speakerphone for the first time, you must pair it with a Bluetooth-enabled mobile handset. The following steps describes pairing instruction for a typical Bluetooth-enabled mobile handset. (a) Place the speakerphone and mobile handset no more than 1 meter apart. (b) Ensure the speakerphone is under OFF mode. (c) Press and hold the MFB until the LED flashes red and blue alternatively. Meanwhile, you may hear a long beep. It’s now ready for pairing. (d) Activate your mobile handset’s Bluetooth accessing function by referring to your mobile handset user guide for details. Meanwhile, the handset will search for accessible Bluetooth devices. (e) Select “BTS-S2B1X” from the list. Enter the pre-programmed passkey “0000” and press “OK” to pair the speakerphone and the handset. When pairing is completed, the LED will flash on blue for 1 second with a long beep from the speaker. Now the speakerphone is under standby mode. (For most of the mobile handset models, a headset icon will be shown on the screen.) (f) Press “Return” to go back to your handset’s main menu. You should, now, be able to make and receive calls through the speakerphone. Please place the mobile handset to the speakerphone no more than 10 meters. (Obstruction could cause shorter sensing distance.) Important: Under the pairing mode, if the pairing cannot be completed within 2 minutes, the speakerphone LED will first flash on red with a beep from speaker, then LED will flash off and speakerphone will be under off mode.. Please repeat steps (b) to (f) to pair the speakerphone and mobile handset again. A2) Connection/Link to a Mobile Handset After pairing is completed, speakerphone is always under standby mode. Before you place or answer a call, if the SKU#: VS37W/2 Description: Bluetooth Speaker Editor: Xue feng Sun Approved by: Henry Chen Version: 1.0 Page: 4/4 3B02 & 3B03, No.5, Hsin-Yi Rd., Sec. 5, Taipei 11011, Taiwan, R. O. C. Tel: 886 2 27223333 Fax: 886 2 27225050 www.celltrend.com.tw headset icon is not on phone screen, please follow the simple steps to activate the Bluetooth connection/link through your handset or speakerphone until the headset icon is on the screen. (a) On Handset: Select “BTS-S2B1X” from the paired list on your handset screen. (b) On Speakerphone: Press MFB and select “Accept” on handset screen to accept connection. Important: Whenever Bluetooth connec…

Text truncated - open the document above for the full version.

You are not logged in Home | Register | Login About Us Membership Overview SIG Member Directory Qualified Designs/Products Components Qualified Listings End Product Detail search BTS-S2A1 BTS-S2B1, BTS-XXXX Mobile Phone Accessory, Office Equipment, Unique Products Bluetooth stereo Speakerphone Company: Celltrend International Co., Ltd. Company URL: www.celltrend.com.tw Geographic Availability: Europe Support URL: www.celltrend.com.tw Product Directory on .COM © 2007 Bluetooth SIG all rights reserved 第 1 頁，共 1 頁Bluetooth.org - - The Official Bluetooth Membership Site 2007/10/19https://www.bluetooth.org/tpg/EPL_Detail.cfm?ProductID=4043

910805 1 International Co., Ltd. 3B02&3B03, No.5 Hsin-Yi Rd., Sec. 5, Taipei 110, Taiwan Tel: 886-2-27223333 (Rep.) Fax: 886-2-27225050 _____E-mail: [email protected] web site: www.celltrend.com.tw___ Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern: We, the undersigned, hereby authorize ELECTRONICS TESTING CENTER, TAIWAN, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by ELECTRONICS TESTING CENTER, TAIWAN on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing ELECTRONICS TESTING CENTER, TAIWAN as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; 910805 2 e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, (signature) Meg Wang Sales Manager CellTrend International Co., Ltd. 3B02&3B03, No.5 Hsin-Yi Rd., Sec. 5, Taipei 110, Taiwan

910805 1 International Co., Ltd. 3B02&3B03, No.5 Hsin-Yi Rd., Sec. 5, Taipei 110, Taiwan Tel: 886-2-27223333 (Rep.) Fax: 886-2-27225050 _____E-mail: [email protected] web site: www.celltrend.com.tw___ Federal Communications Commission FCC ID: SPEBTSS2B1A1X Product Name: Bluetooth stereo Speakerphone Model Name:BTS-S2B1X Trade Name: CELLTREND Dear Sir: In accordance with 47 C.F.R. Section 0.459, we would like to request confidentiality on some exhibits we submitted for above application for the reason of trade secret. If those exhibits are available for public inspection, any person who once gets the information contained in those exhibits will be able to design and to make the same products very easily. This is a very serious problem and huge loss for us, because we did invest so much on it. Please be not made the Exhibit Types listed below routinely available for public inspection: Block Diagram and Schematics and Operation Description. By: By: Daphne Yang (Signature) (Printed) Title : Sales Manager Applicant : CELLTREND INTERNATIONAL CO., LTD. Address : 3B02&3B03, No.5 Hsin-Yi Rd., Sec. 5, Taipei 110, Taiwan Tel : 886-2-27223333 Fax: 886-2-27225050 Date : Oct. 01, 2007

1 Lucy Tsai From: Iris Lin [[email protected]] Sent: Thursday, October 18, 2007 11:26 PM To: Lucy Tsai Subject: Re: CELLTREND INTERNATIONAL CO., LTD., FCC ID: SPEBTSS2B1A1X, Assessment NO.: AN07T7285, Notice#1 Attachments: Bluetooth certificate - BTS-S2B1.pdf; Exhibit-C-Test_Report_rev.pdf; Exhibit-E-User Manual_rev.pdf Dear Lucy, Ans#1: Please refer to the updated manual as attachment for your requirement. Ans#2: Please refer to the updated manual as attachment for your requirement. Ans#3: Please refer to the updated report as attachment for your requirement. Ans#4: Please refer to the BQB certificate. If you have any question, please let us know ASAP because our customer is very urgent for this project. Your response will be appreciated. . ELECTRONICS TESTING CENTER, TAIWAN IRIS LIN (???) TEL: 886‐2‐26023052 ext.10 FAX: 886‐2‐26010910 ‐‐‐‐‐ Original Message ‐‐‐‐‐ From: "Lucy Tsai" <[email protected]> To: "Iris Lin" <[email protected]> Sent: Thursday, October 18, 2007 7:05 PM Subject: FW: CELLTREND INTERNATIONAL CO., LTD., FCC ID: SPEBTSS2B1A1X, Assessment NO.: AN07T7285, Notice#1 Hi Iris, Please address following issues. Q#1: The RF exposure statement shown on the user manual are not enough. Please note that the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located or operating in conjunction with any other antenna or transmitter. End‐Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Please revise. Q#2: User manual page 1 indicates the package of this product includes a travel charger which is powered by AC source that AC line conduction emission should be carried out. Please address. Q#3: Page 59 of test report shown the dwell time test plot under DH3 middle is not correct. It is the plot of low channel. Please revise. Q#4: Please demonstrate that this Bluetooth device has complied with FCC 15.247 requirement as below: Is the hopping sequence pseudorandom, based on the technical description? Is each channel used equally on average, based on the technical description? Does the associated system receiver have a compliant input bandwidth, based on the measured 20 dB emission bandwidth? 2 Does the associated system receiver have the ability to hop in synchronization with the transmitter, based on the technical description? 15.247(g) Does the design of the frequency hopping system allow it to comply with all pertinent requirements when presented with a lengthy data stream? 15.247(h) Does the frequency hopping system comply with the non‐coordination requirement? Best Regards, Lucy The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e‐mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted Any questions about the content of this correspondence should be directed to the e‐mail address listed below the name of the sender.

ETC Report No. : 07-09-RBF-146-03 FCC ID.: SPEBTSS2B1A1X Sheet 1 of 6 Sheets Rev. No 2.1 CONSTRUCTED PHOTOS of EUT 1. Top View of EUT 2. Side View of EUT ETC Report No. : 07-09-RBF-146-03 FCC ID.: SPEBTSS2B1A1X Sheet 2 of 6 Sheets Rev. No 2.1 CONSTRUCTED PHOTOS of EUT 3. Front View of EUT 4. Side View of EUT ETC Report No. : 07-09-RBF-146-03 FCC ID.: SPEBTSS2B1A1X Sheet 3 of 6 Sheets Rev. No 2.1 CONSTRUCTED PHOTOS of EUT 5. Rear View of EUT 6. Bottom View of EUT ETC Report No. : 07-09-RBF-146-03 FCC ID.: SPEBTSS2B1A1X Sheet 4 of 6 Sheets Rev. No 2.1 CONSTRUCTED PHOTOS of EUT 7. Front View of EUT

Bluetooth stereo Speakerphone MODEL : BTS-S2B1X FCC ID : SPEBTSS2B1A1X 26mm 12mm

ETC Report No. : 07-09-RBF-146-03 FCC ID.: SPEBTSS2B1A1X Sheet 5 of 6 Sheets Rev. No 2.1 CONSTRUCTED PHOTOS of EUT 8. Internal View of EUT 9. Battery ETC Report No. : 07-09-RBF-146-03 FCC ID.: SPEBTSS2B1A1X Sheet 6 of 6 Sheets Rev. No 2.1 CONSTRUCTED PHOTOS of EUT 10. Component View of PCB 11. Solder View of PCB

Rev. No 1.0 FCC Part 15 EMI TEST REPORT of E.U.T. : Bluetooth stereo Speakerphone Model : BTS-S2B1X FCC ID : SPEBTSS2B1A1X for APPLICANT :CELLTREND INTERNATIONAL CO., LTD. ADDRESS :3B02&3B03, No. 5, Hsin-Yi Rd., Sec. 5, Taipei 110, Taiwan Test Performed by ELECTRONICS TESTING CENTER, TAIWAN NO.34, LIN 5, DINGFU TSUEN, LINKOU SHIANG TAIPEI COUNTY, TAIWAN, 24442, R.O.C. Tel:(02)26023052 Fax:(02)26010910 http://www.etc.org.tw ; e-mail : [email protected] Report Number : 07-09-RBF-146-03 ETC Report No. : 07-09-RBF-146-03 FCC ID.: SPEBTSS2B1A1X Rev. No 1.0 TEST REPORT CERTIFICATION Applicant :CELLTREND INTERNATIONAL CO., LTD. 3B02&3B03, No. 5, Hsin-Yi Rd., Sec. 5, Taipei 110, Taiwan Manufacture :Mega-Trend Electronics Co., LTD Tong-Fu-Yu lnd., Ku-Keng Community, Guan-Lan Jie-Dao, Bao-An District, Shenzhen 518110, China. Description of Device : a) Type of EUT :Bluetooth stereo Speakerphone b) Trade Name :CELLTREND c) Model No. :BTS-S2B1X d) Power Supply :3.7V 420mAh Battery Regulation Applied : FCC Rules and Regulations Part 15 Subpart C (2007) I HEREBY CERTIFY THAT: The data shown in this report were made in accordance with the procedures given in ANSI C63.4, and the energy emitted by the device was founded to be within the limits applicable. I assume full responsibility for accuracy and completeness of these data. Note: 1. The result of the testing report relate only to the item tested. 2. The testing report shall not be reproduced expect in full, without the written approval of ETC. Issued Date : Oct. 15, 2007 Test Engineer : ( Vincent Chang ) Approve & Authorized Signer : Will Yauo, Manager EMC Dept. II of ELECTRONICS TESTING CENTER, TAIWAN ETC Report No. : 07-09-RBF-146-03 FCC ID.: SPEBTSS2B1A1X Rev. No 1.0 Table of Contents Page 1 GENERAL INFORMATION.......................................................................................................1 1.1 Product Description........................................................................................................................1 1.2 Characteristics of Device................................................................................................................1 1.3 Test Methodology..........................................................................................................................1 1.4 Test Facility....................................................................................................................................1 2 PROVISIONS APPLICABLE.......................................................................................................2 2.1 Definition........................................................................................................................................2 2.2 Requirement for Compliance...........................................................................................................3 2.3 Restricted Bands of Operation........................................................................................................5 2.4 Labeling Requirement.....................................................................................................................6 2.5 User Information............................................................................................................................6 3 SYSTEM TEST CONFIGURATION...........................................................................................7 3.1 Justification.....................................................................................................................................7 3.2 Devices for Tested System.............................................................................................................7 4 RADIATED EMISSION MEASUREMENT..............................................................................8 4.1 Applicable Standard.......................................................................................................................8 4.2 Measurement Procedure.................................................................................................................8 4.3 Measuring Instrument...................................................................................................................10 4.4 Radiated Emission Data................................................................................................................11 4.4.1 Tx Portion................................................................................................................................11 4.4.2 Radiated Emissions in Restricted Bands.....................................................................................14 4.4.3 Other Emissions........................................................................................................................15 4.5 Field Strength Calculation.............................................................................................................16 4.6 Photos of Radiation Measuring Setup............................................................................................17 5 CONDUCTED EMISSION MEASUREMENT........................................................................19 5.1 Standard Applicable.....................................................................................................................19 6 ANTENNA REQUIREMENT....................................................................................................20 6.1 Standard Applicable.....................................................................................................................20 6.2 Antenna Construction...................................................................................................................20 7 HOPPING CHANNEL SEPARATION......................................................................................21 7.1 Standard Applicable....................................................................................................…

Text truncated - open the document above for the full version.

ETC Report No. : 07-09-RBF-146-03 FCC ID.: SPEBTSS2B1A1X Sheet 17 of 36 Sheets Rev. No 2.1 4.6 Photos of Radiation Measuring Setup Charge Mode ETC Report No. : 07-09-RBF-146-03 FCC ID.: SPEBTSS2B1A1X Sheet 18 of 36 Sheets Rev. No 2.1 Bluetooth Operation Mode