SQK-FTP628WSL211AMobile Printer

Mobile Printer FTP-628WSL210 Series User's Guide FUJITSU COMPONENT LIMITED 1 I I n n t t r r o o d d u u c c t t i i o o n n Thank you for purchasing the FTP-628WSL210 Series Mobile Printer (hereafter referred to as “this product”). This User's Guide (hereafter referred to as “this guide”) contains precautions to use it safely and correctly. Before using this product, please be sure to read complete this guide to use it correctly. In addition, please keep this guide handy for future reference. If you have any suggestions or comments on this guide, please do not hesitate to let us know. Bluetooth ® is registered trademark of Bluetooth SIG.. Apple is registered trademark of Apple Inc., registered in the U.S. and other countries. iPhone and iPad are registered trademarks of Apple Inc. Android is trademarks of Google Inc. All other product names and servis names are trademarks or registered trademarks of their respective companies. All Rights Reserved, Copyright © FUJITSU COMPONENT LIMITED 2012 2 P P r r e e c c a a u u t t i i o o n n s s ■ Change of contents The contents of this guide and this product are subject to change without notice for the improvement. ■ Use to high safety application This product was designed and manufactured assuming general purpose use, such as standard industrial, general, personal and home use. This product was not designed and manufactured for a “high safety application”, that is, an application which demands extremely high safety and which may have a serious influence on society and expose individuals to serious danger if high safety is not assured (nuclear reaction control in a nuclear facility, aircraft automatic flight control, air traffic control, transport control in a mass transport system, medical equipment for life support, missile launch control of a weapons system), or an application which requires extremely high reliability (submarine relay, space satellite), Therefore do not use this product for a high safety application. If you are not certain whether this device is in a high safety application category, contact Fujitsu Component Ltd. sales personnel prior to use. We shall take no responsibility for any damage caused by the use of this product in a high safety application. ■ Copyright This product and this guide are copyrighted works of FUJITSU COMPONENT LIMITED. This product and this manual must not be reproduced, duplicated, used, or modified, partially or in full, without permission. 3 ■ Regulatory Compliance For Customers in USA (FCC) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the userʼs authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). 4 For Customers in CANADA (Industry Canada) This equipment complies with Industry Canada RSS210 rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. For Customers in EU (CE Marking) This product is in conformance with the requirements of European Council Directive: R&TTE Directive 1995/5/EC Applied standards: EN 60950-1 EN 300 328 EN 301 489-1 EN 301 489-17 ■ Export This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to the country law is prohibited. ■ Warranty We shall take no responsibility for any failure caused with wrong operation or wrong environment. Moreover, we cannot take responsibility of the loss, of the passive damages or of the claim of the third party, even if it is caused by using or breakdown of this product. In addition, the range of the guarantee of the failure of this product will never exceed the amount of money paid as a price of this product in any case. 5 S S a a f f e e t t y y P P r r e e c c a a u u t t i i o o n n s s ■ Meaning of Symbols The following symbols are used in this guide. Please understand well the meaning of each symbol and read this guide. Warning Indicates possibility of causing severe personal injury or death if not used properly. Caution Indicates that a minor or some personal injury may occur or that the product itself or other userʼs property may be damaged. Indicates danger, warning and caution. A concrete content is described on the side of this symbol. Indicates an action that must not be performed. A concrete content is described on the side of this symbol. Indicates an action that must be performed. A concr…

Text truncated - open the document above for the full version.

CERTIFICATE OF COMPLIANCE Report No.: NEI-FCCE-1-1207196 Issued Date: Sep. 19, 2012 Authorized under Declaration of Conformity according to 47 CFR, Part 2 and Part 15 of the FCC Rules. The product listed in follows was (were) tested in the Neutron EMC Laboratory to comply with the criteria limits Class B of conducted and radiated emissions of the Technical Standards FCC Part 15, Subpart B: 2010, established by the FCC, USA. Equipment Mobile Printer Model Name FTP-628WSL211 Brand Name FUJITSU COMPONENT LIMITED Applicant FUJITSU COMPONENT LIMITED Address 1174, Oaza Suzaka, Suzaka-shi, Nagano 382-0076 Japan Measurement ANSI C63.4: 2009 Method CISPR 22: 2008 CAN/CSA-CISPR 22-10 The test data, data evaluation, and equipment configuration contained in our test report (Report No. NEI-FCCE-1-1207196) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Andy Chiu Authorized Signatory Neutron Engineering Inc. B1, No. 37, Lane 365, YangGuang St., NeiHu District 114, Taipei, Taiwan. TEL: +886-2-2657-3299 FAX: +886-2-2657-3331

RV-0000000 Project No.: 1207196 Page 2 of 1 5 Neutron Engineering Inc. 1207196 RV-0000000 Project No.: 1207196 Page 3 of 1 5 Neutron Engineering Inc. 1207196 120719 6 RV-0000000 Project No.: 1207196 Page 4 of 1 5 Neutron Engineering Inc. 1207196 120719 6 RV-0000000 Project No.: 1207196 Page 11 of 1 5 Neutron Engineering Inc. 1207196 120719 6 RV-0000000 Project No.: 1207196 Page 12 of 1 5 Neutron Engineering Inc. 1207196 RV-0000000 Project No.: 1207196 Page 13 of 1 5 Neutron Engineering Inc. 1207196 120719 6 RV-0000000 Project No.: 1207196 Page 14 of 1 5 Neutron Engineering Inc. 1207196 120719 6 RV-0000000 Project No.: 1207196 Page 15 of 1 5 Neutron Engineering Inc. 1207196 120719 6

RV-0000000 Project No.: 1207196 Page 5 of 1 5 Neutron Engineering Inc. 1207196 120719 6 RV-0000000 Project No.: 1207196 Page 6 of 1 5 Neutron Engineering Inc. 1207196 120719 6 RV-0000000 Project No.: 1207196 Page 7 of 1 5 Neutron Engineering Inc. Bluetooth Module 1207196 120719 6 Antenna RV-0000000 Project No.: 1207196 Page 8 of 1 5 Neutron Engineering Inc. 1207196 RV-0000000 Project No.: 1207196 Page 9 of 1 5 Neutron Engineering Inc. 1207196 120719 6 RV-0000000 Project No.: 1207196 Page 10 of 1 5 Neutron Engineering Inc. 1207196 120719 6

RV-0000000 Report No.: NEI-FCCP-1-1207196 Page 103 of 107 Neutron Engineering Inc. 12 RF EXPOSURE COMPLIANCE 12.1 LIMIT Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 NOTE: f = frequency in MHz ; *Plane-wave equivalent power density. 12.2 MEASUREMENT INSTRUMENTS LIST Item Kind of EquipmentManufacturer Type No. Serial No. Calibrated until 1 Power Meter Anritsu ML2495A 1128008 Feb,20,2013 2 Power Meter Sensor Anritsu MA2411B 1126001 Feb,20,2013 NOTE: N/A: denotes No Model Name, No Serial No. or No Calibration specified. 12.3 MPE CALCULATION METHOD E (V/m) ＝ d GP××30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Peak RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 377 30 d GP × ×× From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained RV-0000000 Report No.: NEI-FCCP-1-1207196 Page 104 of 107 Neutron Engineering Inc. 12.4 TEST SETUP LAYOUT 12.5 DEVIATION FROM TEST STANDARD No deviation 12.6 EUT OPERATING CONDITIONS The EUT tested system was configured as the statements of 4.6 Unless otherwise a special operating condition is specified in the follows during the testing. 12.7 TEST RESULTS The power is so low so there is no need for RF calculations.

RV-0000000 Report No.: NEI-FCCP-1-1207196 Page 1 of 107 Neutron Engineering Inc. Radio Test Report FCC ID: SQK-FTP628WSL211A This report concerns (check one) : Original Grant Class II Change Issued Date : Sep. 19, 2012 Project No. : 1207196 Equipment : Mobile Printer Model Name : FTP-628WSL211 Applicant : FUJITSU COMPONENT LIMITED Address : 1174, Oaza Suzaka, Suzaka-shi, Nagano 382-0076 Japan Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Aug. 01, 2012 Date of Test: Aug. 01, 2012 ~ Sep. 05, 2012 Testing Engineer : (Rush Kao) Technical Manager : (Jeff Yang) Authorized Signatory : (Andy Chiu) Neutron Engineering Inc. B1, No. 37, Lane 365, YangGuang St., NeiHu District 114, Taipei, Taiwan. TEL: +886-2-2657-3299 FAX: +886-2-2657-3331 RV-0000000 Report No.: NEI-FCCP-1-1207196 Page 2 of 107 Neutron Engineering Inc. Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences or generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. RV-0000000 Report No.: NEI-FCCP-1-1207196 Page 3 of 107 Neutron Engineering Inc. Table of Contents REPORT ISSUED HISTORY 6 1 CERTIFICATION 7 2 . SUMMARY OF TEST RESULTS 8 2.1 TEST FACILITY 9 2.2 MEASUREMENT UNCERTAINTY 9 3 GENERAL INFORMATION 10 3.1 GENERAL DESCRIPTION OF EUT 10 3.2 DESCRIPTION OF TEST MODES 12 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 13 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 14 3.5 DESCRIPTION OF SUPPORT UNITS 15 4 CONDUCTED EMISSION 16 4.1 LIMIT 16 4.2 MEASUREMENT INSTRUMENTS LIST 16 4.3 TEST PROCEDURES 17 4.4 TEST SETUP LAYOUT 17 4.5 DEVIATION FROM TEST STANDARD 17 4.6 EUT OPERATING CONDITIONS 18 4.7 TEST RESULTS 19 5 ANTENNA CONDUCTED SPURIOUS EMISSION 21 5.1 LIMIT 21 5.2 MEASUREMENT INSTRUMENTS LIST 21 5.3 TEST PROCEDURES 21 5.4 TEST SETUP LAYOUT 21 5.5 DEVIATION FROM TEST STANDARD 21 5.6 EUT OPERATING CONDITIONS 21 5.7 TEST RESULTS 22 6 HOPPING CHANNEL SEPARATION 30 6.1 LIMIT 30 6.2 MEASUREMENT INSTRUMENTS LIST 30 6.3 MEASURING INSTRUMENTS SETTING 30 6.4 TEST PROCEDURES 30 6.5 TEST SETUP LAYOUT 30 6.6 DEVIATION FROM TEST STANDARD 30 6.7 EUT OPERATING CONDITIONS 30 6.8 TEST RESULTS 31 7 MAXIMUM PEAK CONDUCTED OUTPUT POWER 39 7.1 LIMIT 39 RV-0000000 Report No.: NEI-FCCP-1-1207196 Page 4 of 107 Neutron Engineering Inc. Table of Contents 7.2 MEASUREMENT INSTRUMENTS LIST 39 7.3 TEST PROCEDURES 39 7.4 TEST SETUP LAYOUT 39 7.5 DEVIATION FROM TEST STANDARD 39 7.6 EUT OPERATING CONDITIONS 39 7.7 TEST RESULTS 40 8 RADIATED SPURIOUS EMISSION (9 KHZ TO 1 GHZ) 44 8.1 LIMIT 44 8.2 MEASUREMENT INSTRUMENTS LIST 45 8.3 MEASURING INSTRUMENTS SETTING 45 8.4 TEST PROCEDURES 46 8.5 DEVIATION FROM TEST STANDARD 46 8.6 TEST SETUP LAYOUT 46 8.7 EUT OPERATING CONDITIONS 47 8.8 TEST RESULTS 48 9 RADIATED SPURIOUS EMISSION (ABOVE 1 GHZ) 50 9.1 LIMIT 50 9.2 MEASUREMENT INSTRUMENTS LIST 51 9.3 MEASURING INSTRUMENTS SETTING 51 9.4 TEST PROCEDURES 52 9.5 DEVIATION FROM TEST STANDARD 52 9.6 TEST SETUP LAYOUT 52 9.7 EUT OPERATING CONDITIONS 53 9.8 TEST RESULTS 54 9.9 TEST RESULTS (RESTRICTED BANDS) 78 10 NUMBER OF HOPPING FREQUENCY 86 10.1 LIMIT 86 10.2 MEASUREMENT INSTRUMENTS LIST 86 10.3 MEASURING INSTRUMENTS SETTING 86 10.4 TEST PROCEDURES 86 10.5 TEST SETUP LAYOUT 86 10.6 DEVIATION FROM TEST STANDARD 86 10.7 EUT OPERATING CONDITIONS 86 10.8 TEST RESULTS 87 11 AVERAGE TIME OF OCCUPANCY 89 11.1 LIMIT 89 11.2 MEASUREMENT INSTRUMENTS LIST 89 11.3 TEST PROCEDURES 89 RV-0000000 Report No.: NEI-FCCP-1-1207196 Page 5 of 107 Neutron Engineering Inc. Table of Contents 11.4 TEST SETUP LAYOUT 89 11.5 DEVIATION FROM TEST STANDARD 89 11.6 EUT OPERATING CONDITIONS 90 11.7 TEST RESULTS 91 12 RF EXPOSURE COMPLIANCE 103 12.1 LIMIT 103 12.2 MEASUREMENT INSTRUMENTS LIST 103 12.3 MPE CALCULATION METHOD 103 12.4 TEST SETUP LAYOUT 104 12.5 DEVIATION FROM TEST STANDARD 104 12.6 EUT OPERATING CONDITIONS 104 12.7 TEST RESULTS 104 13 EUT TEST PHOTO 105 RV-0000000 Report No.: NEI-FCCP-1-1207196 Page 6 of 107 Neutron Engineering Inc. REPORT ISSUED HISTORY Revised Version No. Description Issued Date - Initial Issue. Sep. 19, 2012 RV-0000000 Report No.: NEI-FCCP-1-1207196 Page 7 of 107 Neutron Engineering Inc. 1 CERTIFICATION E q u i p m e n t : Mobile Printer Brand Name : FUJITSU COMPONENT LIMITED Model Name : FTP-628WSL211 A p p l i c a n t : FUJITSU COMPONENT LIMITED Date of Test : Aug. 01, 2012 ~ Sep. 05, 2012 Standards : FCC Part 15, Subpart C: 2010 ANSI C63.4: 2009 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCC…

Text truncated - open the document above for the full version.

RV-0000000 Report No.: NEI-FCCP-1-1207196 Page 105 of 107 Neutron Engineering Inc. 13 EUT TEST PHOTO Conducted emission test photos RV-0000000 Report No.: NEI-FCCP-1-1207196 Page 106 of 107 Neutron Engineering Inc. Radiated spurious emission test photos Below 1 GHz 1207196 1207196 RV-0000000 Report No.: NEI-FCCP-1-1207196 Page 107 of 107 Neutron Engineering Inc. Radiated spurious emission test photos Above 1 GHz 1207196 1207196