Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Federal Communica ons Commission Authoriza on and Evalua on Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 16/02/2026 Ref: A esta on Statement Part 2.911(d)(7) Filing FCC ID: SWX Ubiqui Inc cer fies that, as of the dates of this applica on, Americas Compliance Consul ng LLC dba iCer fi is our designated U.S. agent for service of process for the above referenced FCC ID. Manufacturer accepts to maintain an agent for no less than two year a er the grantee has terminated all marke ng and importa on or the conclusion of any commission-related proceeding involving the equipment. iCer fi accepts, as of the date of the filing of the applica on, the obliga on of the designated U.S. agent for service process for the above referenced FCC ID. Designated U.S. Agent Informa on: Name: Americas Compliance Consul ng LLC dba iCer fi FCC FRN: 0033399411 Address: 5809 US-2, Suite B, Albeni Plaza Priest River, Idaho 83856, United States Contact Person: Paul Preston Tel: +1 (866) 885-4575 Email: fccagent@icer fi.com Sincerely, Ubiqui IncAmericas Compliance Consul ng LLC dba iCer fi FRN: 0012268215FRN: 0033399411 Alex MaconPaul Preston [email protected]@icer fi.com 1-408-942-3084+1 (866) 885-4575 Signature: Signature:
Date: November 26, 2025 Federal Communications Commission (the “Commission” or “FCC”) Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD 21046 USA RE: Attestation Statements Part 2.911(d)(5)(i) Filing – FCC ID: SWX-USLF Ubiquiti Inc. (“the applicant”) certifies that, as of the date of the application, the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization under 47 CFR §2.903. Furthermore, the equipment is not produced or provided by any entity listed on the FCC’s Covered List. This includes, but is not limited to, cybersecurity and antivirus software developed or distributed by Kaspersky Lab, Inc., its successors, or its assignees. Sincerely, Alex Macon Ubiquiti lnc. Compliance Officer www.ui.com
Date: November 26, 2025 Federal Communications Commission (the “Commission” or “FCC”) Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD 21046 USA RE: Attestation Statements Part 2.911(d)(5)(ii) Filing – FCC ID: SWX-USLF Ubiquiti Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List 1 as an entity producing “covered” equipment. Sincerely, Alex Macon Ubiquiti lnc. Compliance Officer 1 https://www.fcc.gov/supplychain/coveredlist www.ui.com
Date: November 26, 2025 RE: Request for Confidentiality In reference to the application under FCC ID: SWX-USLF, and pursuant to Sections 0.457(d)1(ii) and 0.459 of the Commission’s Rules, Ubiquiti Inc. hereby requests permanent confidential treatment of the accompanying information as outlined below: Block Diagram Schematics Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to Ubiquiti Networks and provide unjustified benefits to its competitors. In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the important rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short term confidentiality on the following attachments until 180 days from grant date. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Ubiquiti Networks understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Alex Macon Ubiquiti lnc. Compliance Manager www.ui.com
Power of Attorney Date: November 26, 2025 Dear Sir or Madam, I hereby have entrusted the following entity to be an authorized agent regarding application for Type Certification. Ubiquiti Inc. also authorizes the following entity to be a proxy to handle all certification matters. Cerpass Technology Corporation Address : No.10, Lane 2, Lianfu Street, Luzhu District, Taoyuan City, Taiwan R.O.C. e-mail : [email protected] Applicant : Ubiquiti Inc. Address : 685 Third Avenue ,New York NY 10017 United States Of America Sincerely, Alex Macon Ubiquiti, lnc. Compliance Manager www.ui.com
Ubiquiti Inc. E-Label Information Model: USL-FOB A. Information to be displayed 1. The information that will be displayed on the e-label and information that will remain in the user manual is shown below: Information On e-label In Manual FCC/ISED ID number Yes No FCC logo / DoC logo No No 15.19 statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) Yes No Class A / B Digital Device user manual statements 1 Yes No Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment 1 Yes No Describe any other FCC regulatory information included in e-label 1 Yes No 1 If the e-label includes information typically included in the manual then the e-label shall clearly differentiate between information required to be on the device’s surface and information required to be in the manual – refer to 784748 D02 e labelling v01 section II D 3(b) The e-label is provided as the below: B. Access to the required information on the e-label 1. Users are able to access the information in no more than three steps in a device’s menu. The actual steps are: E-label and warning statements can be found Scan folding QR code>Site Manager Click on "Update Manager “>click on "Show Details” No special access codes or permissions are required to go through the above steps beyond entering a user- defined password to protect against unauthorized access to the device. 2. The information is stored on the device, no special accessories or supplemental plug-ins (e.g., a SIM/USIM card) are required to access the information. Yes 3. Users are provided specific instructions on how to access the information. The information to the user is provided in the last page of user manual. C. Labeling for Importation and Purchasing Products utilizing e-labels are required to have a physical label on the product at the time of importation, marketing and sales. For devices imported in bulk and not packaged individually, a removable adhesive label or, for devices in protective bags, a label on the bags is acceptable for this purpose. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. For devices imported already in individual packages ready for sale, the information may alternatively be provided on the package. It shall contain: 1. The FCC/ISED ID and/or the DoC logo (if applicable); and 2. Any other information required by specific rule to be provided on the surface of the product unless such information is permitted to be included in the User’s manual or other packaging inserts The FCC ID and model number are present on the product packaging. D. Other considerations 1. The above information must be programmed by the responsible party and the information must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the grantee. The user cannot modify the e-label information. 2. All the applicable regulatory information required on the packaging or user instructions must be provided according to the rules even if it is displayed electronically. For example, hearing aid compatibility (HAC) ratings for the phones as specified in 47 C.F.R. § 20.19. Yes, it is provided.
Report No.: 4791648924-US-S0-V0 Issue Date: 12/9/2025 Page 1 of 4 Underwriters Laboratories Taiwan Co., Ltd. This report shall not be reproduced without the written approval of Underwriters Laboratories Taiwan Co., Ltd. Appendix B: Antenna Dimensions and Separation Distances Antenna Front Back Edge 1 Edge 2 Edge 3 Edge 4 Lora Antenna 5 5 2 2 490 2 Unit : mm Report No.: 4791648924-US-S0-V0 Issue Date: 12/9/2025 Page 2 of 4 Underwriters Laboratories Taiwan Co., Ltd. This report shall not be reproduced without the written approval of Underwriters Laboratories Taiwan Co., Ltd. Appendix C: SAR System Check Plots Test Laboratory:Underwriters Laboratories Taiwan Co., Ltd Date: 2025/9/10 System Performance Check-835MHz DUT: D835V2-4d216 Communication System: UID 0, CW (0); Frequency: 835 MHz; Communication System PAR: 0 dB Medium parameters used: f = 835 MHz; σ = 0.929 S/m; ε r = 42.444; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature : 23.5 °C ; Liquid Temperature : 22.5 °C DASY Configuration: • Probe: EX3DV4 - SN7515; ConvF(8.66, 8.52, 8.91) @ 835 MHz; Calibrated: 2025/1/7 o Modulation Compensation: • Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = 1.0, 31.0 • Electronics: DAE4 Sn1305; Calibrated: 2025/4/22 • Phantom: ELI v5.0_1213; Type: QDOVA001BB; Serial: 1213 • DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) System Check/835MHz/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.36 W/kg System Check/835MHz/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 63.30 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 3.65 W/kg SAR(1 g) = 2.6 W/kg; SAR(10 g) = 1.72 W/kg Smallest distance from peaks to all points 3 dB below = 17.6 mm Ratio of SAR at M2 to SAR at M1 = 70.7% Maximum value of SAR (measured) = 3.34 W/kg 0 dB = 3.34 W/kg = 5.24 dBW/kg Report No.: 4791648924-US-S0-V0 Issue Date: 12/9/2025 Page 3 of 4 Underwriters Laboratories Taiwan Co., Ltd. This report shall not be reproduced without the written approval of Underwriters Laboratories Taiwan Co., Ltd. Appendix D: Highest SAR Test Plots Test Laboratory:Underwriters Laboratories Taiwan Co., Ltd Date: 2025/9/10 Lora_GFSK_SF10_125kHz_Edge 2_0mm_ch0 DUT: Lora Communication System: UID 0, WCDMA (0); Frequency: 915.2 MHz; Communication System PAR: 0 dB Medium parameters used (interpolated): f = 915.2 MHz; σ = 0.996 S/m; ε r = 41.289; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature : 23.5 °C ; Liquid Temperature : 22.5 °C DASY Configuration: • Probe: EX3DV4 - SN7515; ConvF(8.55, 8.41, 8.79) @ 915.2 MHz; Calibrated: 2025/1/7 o Modulation Compensation: • Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -49.0, 31.0 • Electronics: DAE4 Sn1305; Calibrated: 2025/4/22 • Phantom: ELI v5.0_1213; Type: QDOVA001BB; Serial: 1213 • DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) Bottom/Lora/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.173 W/kg Bottom/Lora/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.405 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 0.209 W/kg SAR(1 g) = 0.113 W/kg; SAR(10 g) = 0.063 W/kg Smallest distance from peaks to all points 3 dB below = 12.2 mm Ratio of SAR at M2 to SAR at M1 = 52.9% Maximum value of SAR (measured) = 0.172 W/kg 0 dB = 0.172 W/kg = -7.64 dBW/kg Report No.: 4791648924-US-S0-V0 Issue Date: 12/9/2025 Page 4 of 4 Underwriters Laboratories Taiwan Co., Ltd. This report shall not be reproduced without the written approval of Underwriters Laboratories Taiwan Co., Ltd. Appendix E: SAR Probe and Dipole Calibration Certificates Title: Dipole Extended Calibration Public version Document Number: Form-ULID-020517, Issue 1.0 Page 2 of 3 Copyright© 2024 UL LLC. All Rights reserved. May not be reproduced without permission. THIS DOCUMENT IS CLASSIFIED CONFIDENTIAL. It is intended for Internal Use Only and may not be disclosed to any party that is not authorized to receive it. Dipole: 835MHz, S/N: 4d216, Dipole calibration According to KDB 865664 & IEEE Std 1528 - 2013: Title: Dipole Extended Calibration Public version Document Number: Form-ULID-020517, Issue 1.0 Page 3 of 3 Copyright© 2024 UL LLC. All Rights reserved. May not be reproduced without permission. THIS DOCUMENT IS CLASSIFIED CONFIDENTIAL. It is intended for Internal Use Only and may not be disclosed to any party that is not authorized to receive it. Delta (%) 2023/10/1849.574N/A-1.8014N/A-34.616N/A Calibration Date Impedance R (ohm) Delta (ohm) Impedance jX (ohm) Delta (ohm) Return-loss (dB) 3.112024/10/148.094-1.480.8222.62-35.694
Underwriters Laboratories Taiwan Co., Ltd. Building A, B and E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX) :+886-3-583-7948 Doc No: Form-ULID-004755(DCS:17-EM-F0904) Issue: 7.0 Page 1 of 22 SAR EVALUATION REPORT FCC 47 CFR § 2.1093 IEEE Std 1528-2013 For Alarm Control KeyFob FCC ID: SWX-USLF Model Name: USL-FOB Report Number: 4791648924-US-S0-V0 Issue Date: 2025/12/9 Prepared for Ubiquiti Inc. 685 Third Avenue, 27th Floor New York, New York 10017, USA Prepared by Underwriters Laboratories Taiwan Co., Ltd., Building A, B and E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan TEL: +886-2-7737-3000 FAX: +886-3-583-7948 Website: www.ul.com The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report are responsible of the test sample(s) provided by the client only and are not to be used to indicate applicability to other similar products. Report No.: 4791648924-US-S0-V0 Issue Date: 2025/12/9 Underwriters Laboratories Taiwan Co., Ltd. Building A, B and E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX) :+886-3-583-7948 Doc No: Form-ULID-004755(DCS:17-EM-F0904) Issue: 6.0 Page 2 of 22 REVISION HISTORY Rev. Date Revisions Revised By V0 2025/12/9 Initial Issue Sally Lu Report No.: 4791648924-US-S0-V0 Issue Date: 2025/12/9 Underwriters Laboratories Taiwan Co., Ltd. Building A, B and E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX) :+886-3-583-7948 Doc No: Form-ULID-004755(DCS:17-EM-F0904) Issue: 6.0 Page 3 of 22 Table of Contents 1. Attestation of Test Results ......................................................................................... 4 2. Test Specification, Methods and Procedures........................................................... 5 3. Facilities and Accreditation ....................................................................................... 6 4. SAR Measurement System & Test Equipment ......................................................... 7 4.1. SAR Measurement System ...................................................................................... 7 4.2. SAR Scan Procedures .............................................................................................. 8 4.3. Test Equipment ...................................................................................................... 10 5. Measurement Uncertainty ........................................................................................ 11 6. Device Under Test (DUT) Information ..................................................................... 12 6.1. DUT Description ..................................................................................................... 12 6.2. Wireless Technologies ........................................................................................... 13 7. RF Exposure Conditions (Test Configurations) ..................................................... 14 7.1. Standalone SAR Test Exclusion Considerations .................................................... 14 8. Dielectric Property Measurements & System Check ............................................. 16 8.1. Dielectric Property Measurements ......................................................................... 16 8.2. System Check ........................................................................................................ 18 9. Conducted Output Power Measurements ............................................................... 19 9.1. Lora ........................................................................................................................ 19 10. Measured and Reported (Scaled) SAR Results ...................................................... 20 10.1. Test Condition ..................................................................................................... 20 10.2. Lora ..................................................................................................................... 21 Appendixes ........................................................................................................................... 22 4791648924-US-S0-V0_Appendix A: SAR Setup Photos ................................................. 22 4791648924-US-S0-V0_Appendix B: Antenna Dimensions and Separation Distances ... 22 4791648924-US-S0-V0_Appendix C: SAR System Check Plots ...................................... 22 4791648924-US-S0-V0_Appendix D: Highest SAR Test Plots ......................................... 22 4791648924-US-S0-V0_Appendix E: SAR Probe and Dipole Calibration Certificates ..... 22 Report No.: 4791648924-US-S0-V0 Issue Date: 2025/12/9 Underwriters Laboratories Taiwan Co., Ltd. Building A, B and E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX) :+886-3-583-7948 Doc No: Form-ULID-004755(DCS:17-EM-F0904) Issue: 6.0 Page 4 of 22 1. Attestation of Test Results Applicant Name Ubiquiti Inc. FCC ID SWX-USLF Model Name USL-FOB Exposure Category Uncontrolled Exposure Exposure Category SAR Limits (W/Kg) Peak spatial-average(1g of tissue) General population/Uncontrolled exposure 1.6 RF Exposure Conditions Equipment Class - Highest Reported SAR (W/kg) Body-worn 0.116 Date Tested 2025/9/10 Test Results Pass Underwriters Laboratories Taiwan Co., Ltd. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by Underwriters Laboratories Taiwan Co., Ltd. based on interpretations and/or observations of test results. The test results show that the equipment tested is capable of d…
Text truncated - open the document above for the full version.
USL – FOB US Antenna Datasheet Authorized by: Sony Chayadi Outline •AUT Environment −Instrument Information −Test Method •Antenna Performance −Sub6 Antenna Performances AUT Environment Instrument Information Instrument ListModelCalibration DateCalibration Due Date Transfer SwitchingMVG2024/11/132025/11/12 TX AmplificationMVG2024/11/132025/11/12 RX AmplificationMVG2024/11/132025/11/12 Active SwitchingMVG2024/11/132025/11/12 Network AnalyzerR&S ZNB2024/11/132025/11/12 Radiocom TesterAnritsu MT88212024/11/132025/11/12 Full SystemSG24-Standard2024/11/132025/11/12 Calibration Record •Full system calibration, including each instrument, will proceed once per year. •Regular calibration, including efficiency/peak gain consistency check, will proceed with bi-monthly. Test Method Measurement Standard •To fix device on the turntable, and laser positioning the height level in the center of the probe. •Align the chamber coordinate and UI coordinate. •Sampling the antenna pattern according to Phi increment 5º / Theta increment 5º. •Finished 3D data collection along with Theta-175º~Theta175º and Phi0º~Phi180º •Frequency resolution setup depends on the different bands. X Y Z Antenna Performance [USL-FOB US] Antenna Performance Sub6 Working frequency 902 – 928 MHz Antenna typePIFA Gain-1 dBi Model117-06337 Drawing Antenna Location Sub6 Antenna Sub6 Antenna Manufacturer: Ubiquiti Inc. Address: 685 3 rd Avenue Floor New York, NY 10017 United States
CERPASS TECHNOLOGY CORP. Report No.: 24120564-TRFCC01 Cerpass Technology Corp. Issued date : Oct. 01, 2025 T-FD-517-0 Ver 1.8 Page No. : 1 of 44 FCC ID. : SWX-USLF FCC RADIO TEST REPORT Applicant : Ubiquiti Inc. Address : 685 Third Avenue, New York, New York 10017, USA Equipment : Alarm Control KeyFob Model No. : USL-FOB Trade Name : UBIQUITI FCC ID. : SWX-USLF I HEREBY CERTIFY THAT : The sample was received on Jan. 02, 2025 and the testing was completed on Aug. 18, 2025 at Cerpass Technology Corp. The test result refers exclusively to the test presented test model / sample. Without written approval of Cerpass Technology Corp., the test report shall not be reproduced except in full. Approved by: Mark Liao / Supervisor Laboratory Accreditation: Cerpass Technology Corporation Test Laboratory CERPASS TECHNOLOGY CORP. Report No.: 24120564-TRFCC01 Cerpass Technology Corp. Issued date : Oct. 01, 2025 T-FD-517-0 Ver 1.8 Page No. : 2 of 44 FCC ID. : SWX-USLF CONTENTS 1. Summary of Test Procedure and Test Results ................................................................................ 5 1.1 Applicable Standards ................................................................................................................. 5 2. Test Configuration of Equipment under Test ................................................................................... 6 2.1 Feature of Equipment under Test ............................................................................................... 6 2.2 Carrier Frequency of Channels .................................................................................................. 6 2.3 Test Mode & Test Software ........................................................................................................ 7 2.4 Description of Test System ......................................................................................................... 7 2.5 General Information of Test ........................................................................................................ 8 2.6 Measurement Uncertainty .......................................................................................................... 8 3. Test Equipment and Ancillaries Used for Tests ............................................................................... 9 4. Antenna Requirements ..................................................................................................................... 11 4.1 Standard Applicable ................................................................................................................. 11 4.2 Antenna Construction and Directional Gain ............................................................................. 11 5. Test of AC Power Line Conducted Emission ................................................................................. 12 5.1 Test Limit .................................................................................................................................. 12 5.2 Test Procedures ....................................................................................................................... 12 5.3 Typical Test Setup .................................................................................................................... 13 5.4 Test Result and Data ................................................................................................................ 13 6. Test of Radiated Spurious Emission............................................................................................... 14 6.1 Test Limit .................................................................................................................................. 14 6.2 Test Procedures ....................................................................................................................... 15 6.3 Typical Test Setup ................................................................................................................... 16 6.4 Test Result and Data (9kHz ~ 30MHz) .................................................................................... 17 6.5 Test Result and Data (30MHz ~ 1GHz) ................................................................................... 17 6.6 Test Result and Data (1GHz ~ 10GHz) .................................................................................... 23 6.7 Restricted Bands of Operation ................................................................................................. 29 6.8 Test Photographs (30MHz ~ 1GHz) ......................................................................................... 30 6.9 Test Photographs (1GHz ~ 10GHz) ......................................................................................... 31 7. Test of Conducted Spurious Emission ........................................................................................... 33 7.1 Test Limit .................................................................................................................................. 33 7.2 Test Procedure ......................................................................................................................... 33 7.3 Test Setup Layout .................................................................................................................... 33 7.4 Test Result and Data ................................................................................................................ 33 8. 20dB Bandwidth Measurement Data ............................................................................................... 36 8.1 Test Limit .................................................................................................................................. 36 8.2 Test Procedures ....................................................................................................................... 36 8.3 Test Setup Layout ..................................................…
Text truncated - open the document above for the full version.
5809 US-2, Suite B Albeni Plaza · 83856 · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 915.2 MHz - 927.8 MHz | 31.00 mW |
Digital Transmission Radio
Equipment Class
DTS - Digital Transmission SystemSuperLink Gateway HA
Equipment Class
DTS - Digital Transmission SystemDigital Transmission Radio
Equipment Class
DTS - Digital Transmission SystemRecessed Entry Sensor
Equipment Class
DSS - Part 15 Spread Spectrum TransmitterG6 Edge Dome
Equipment Class
DTS - Digital Transmission System