SWX-UVPTMUniFi Talk UVP Touch Max

VoIP Phone with 7" HD LCD Display and Touch Model: UVP-TouchMax • Package Contents • Hardware Overview • Software • Specifications • Safety Notices • Electrical Safety Information • Limited Warranty • Compliance • Declaration of Conformity • Online Resources Package Contents UVP Touch Max Installation Requirements • UniFi Switch or PoE+ (802.3at-compliant) switch • Recommended: UniFi Talk Controller installed on UCK-G2- Plus or UDM Pro. Alternate Option: Use a third-party SIP/PBX provider Hardware Overview 1 2 45 3 128 PM TUE, MAY 20 6 1 Camera Built-in camera can be used for snapping photos for avatars or videoconferencing applications. 2 Touchscreen The touchscreen display is used for all interface navigation and dialing. 3 Keypad Touch to display the numeric keypad. 4 LED The LED will illuminate when the device is first connected to a 48V power source. Once the phone has started up, the LED will turn off. IMPORTANT: The LED will flash when a firmware update is occurring. Do not disconnect power/Ethernet from the device during this time. 5 Volume Press this soft button to display the volume adjustment screen. 6 Mute Button Press this button to mute the phone’s audio output. 8 7 109 7 Headset Jack 3.5 mm jack for optional wired stereo and microphone headsets. 8 USB C Port The USB C port can be used to charge a device. 9 PC This Ethernet port is used for bridging. WARNING: Do not connect a powered Ethernet connection to the port labeled PC. 10 PoE/LAN The PoE/LAN Ethernet port is 802.3af-compliant and used to connect data and power to the phone. Connect this to the same network where the UniFi Talk controller is running on the UCK-G2+ or UDM Pro. Software 1. 2. 3. 4. 5. Specifications UVP-TouchMax Dimensions254.6 x 135 x 182.5 mm (10.02 x 5.31 x 7.19") Weight1.52 kg (53.6 oz) Display7" (Diagonal), 800 x 120 HD, GFF Multi-Touch Camera5M Pixel LEDPower Status: White, Glowing Handset Dynamic Receiver 16 ohm/SPL 116dB @1KHz, 30mW, 0m Omnidirectional Electret Microphone/SNR 70 dB/ Sensitivity -38 ± 3 dB Audio Codec WCD9326: Standalone Hi-Fi audio codec IC WSA8815: Smart Speaker Amplifier Power InputPoE+ 802.3.at Hands-Free Speaker 4 ohm, Pnom 3W, Pmax 5W, SPL 79 dB @ 1W, 0.5m Hands-Free Microphone Dual Omnidirectional MEMS Microphones SNR 64 dB Sensitivity -26 dBFS Digital Microphone Ports(2) 10/100/1000 Ethernet Ports (1) Type-C Port (charging only, 5V/1A) ConnectivityBluetooth 4.2 Wi-Fi 2.4G b/g/n, BW 20/40 Wi-Fi 5G a/n/ac, BW 20/40/80, Slave DFS Headset Support3.5mm Audio Jack ProcessorOcta-core CPU, 8x ARM Cortex A53, 1.8 GHz MemoryStorage 32 GB +RAM 2 GB Operating Temp.0 to 40° C (32 to 104° F) Software OSAndroid 9 / PJSIP v2.4 Audio DSP Algorithms Active Echo Cancellation, Noise Suppression, Blind Source Separation ProtocolsSIP, SDP, RTP, RTCP, VLAN, DHCP Important Warning Regarding Emergency Calls NOTE THAT THE LIMITATIONS SET FORTH BELOW ARE APPLICABLE TO ALL EMERGENCY CALLS, FUNCTIONS AND SERVICES, INCLUDING 911, ENHANCED 911 AND 112 CALLS (COLLECTIVELY, “EMERGENCY SERVICES”). 1. You should be aware that: a. Emergency Services may not connect to the Public Service Answering Point (“PSAP”), or may ring to the administrative line of the PSAP, which may not be staffed after hours, or by trained emergency operators. b. VoIP customers may need to provide location or other information to their VoIP providers, and update this information if they change locations, for their Emergency Services to function properly. c. VoIP service may not work during a power outage, or when the Internet connection fails or becomes overloaded. Consider installing a backup power supply, maintaining a traditional phone line or having a wireless phone as a backup. d. VoIP service will not function if the telephone equipment or other equipment necessary to place calls is not correctly configured. e. Emergency Services may correctly connect to the PSAP, but may not transmit the user’s phone number and/or location information. f. VoIP calls may not be capable of being received and/or processed by an emergency call center due to the center’s technical limitations. g. VoIP calls may be affected by other factors or force majeure events, such as the quality of the broadband connection and network congestion. 2. You should: a. Provide your accurate physical address to your interconnected VoIP service provider to ensure that emergency services can quickly be dispatched to your location. b. Be familiar with your VoIP service provider’s procedures for updating your address, and promptly update address information in the event of a change. c. Have a clear understanding of any limitations of your Emergency Services. d. Inform children, babysitters and visitors about your VoIP service and its Emergency Services limitations. 3. By installing the phone, you are affirmatively acknowledging that (i) you have read and understood this Warning, (ii) you understand that you may not be able to contact emergency services by dialing or using any Emergency Service, and (iii) you understand that you must inform users of the phone that they may not be able to contact emergency services by dialing or using any Emergency Service. 4. IN NO EVENT SHALL UBIQUITI, ITS AFFILIATES, OFFICERS, DIRECTORS, EMPLOYEES, REPRESENTATIVES, AGENTS OR ANY OTHER THIRD‑PARTY PROVIDER OR VENDOR WHO MAY FURNISH SERVICES OR PRODUCTS TO YOU IN CONNECTION WITH THE VOIP SERVICES OR THE EQUIPMENT BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS WHATSOEVER ARISING FROM OR RELATING TO EMERGENCY SERVICES, AND YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING THEREFROM OR RELATING THERETO. Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in a location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Info…

Text truncated - open the document above for the full version.

Antenna Spec Antenna Type: Internal Antenna Antenna Gain: 2400-2480MHz: 0dBi for BT/BLE For WLAN: 2400-2483.5MHz: 2dBi 5150-5850MHz: 4.5dBi

RF_160, Issue 02 Declaration of Authorization We Name: Ubiquiti Inc . Address: 685 Third Avenue City: New York, NY Country: United States, 10017 Declare that: Name Representative of agent: Delia Feng (1) Agent Company name: Cerpass Technology Corporation Address: No.10, Lane 2, Lianfu Street, Luzhu Dist., City: Taoyuan City 33848 Country: Taiwan, R.O.C. is authorized to apply for Certification of the following product(s): Product description: UniFi Talk UVP Touch Max Type designation: UVP-TouchMax Trademark: UBIQUITI on our behalf. Date: July 20, 2020 City: New York Name: Mark Feil Function: Compliance Manager Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 10-Aug-09 RF_501, Issue 5 Page 1 of 1 Company Name: Ubiquiti Inc. Address : 685 Third Avenue City: New York, NY, 10017 Country: United States To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: SWX-UVPTM Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: For marketing purpose Planned Release Date STC: 45 days from the date of grant. (notes 2, 3, 4, 5) Date: 2020/07/20 Name and signature of applicant: Mark Feil Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

CERPASS TECHNOLOGY CORP. Report No.:1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 Page No. : 1 of 14 Photographs of EUT CERPASS TECHNOLOGY CORP. Report No.:1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 Page No. : 2 of 14 CERPASS TECHNOLOGY CORP. Report No.:1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 Page No. : 3 of 14 CERPASS TECHNOLOGY CORP. Report No.:1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 Page No. : 4 of 14 CERPASS TECHNOLOGY CORP. Report No.:1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 Page No. : 5 of 14

CERPASS TECHNOLOGY CORP. Report No.:1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 Page No. : 6 of 14 CERPASS TECHNOLOGY CORP. Report No.:1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 Page No. : 7 of 14 CERPASS TECHNOLOGY CORP. Report No.:1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 Page No. : 8 of 14 CERPASS TECHNOLOGY CORP. Report No.:1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 Page No. : 9 of 14 RF Chip Antenna position CERPASS TECHNOLOGY CORP. Report No.:1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 Page No. : 10 of 14 CERPASS TECHNOLOGY CORP. Report No.:1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 Page No. : 11 of 14 CERPASS TECHNOLOGY CORP. Report No.:1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 Page No. : 12 of 14 CERPASS TECHNOLOGY CORP. Report No.:1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 Page No. : 13 of 14 CERPASS TECHNOLOGY CORP. Report No.:1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 Page No. : 14 of 14

CERPASS TECHNOLOGY CORP. Report No.: TEFU1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 T-FD-503-0 Ver 1.2 Page No. : 1 of 29 FCC ID. : SWX-UVPTM FCC RADIO TEST REPORT Applicant : Ubiquiti Inc. Address : 685 Third Avenue, New York, New York 10017, USA Equipment : UniFi Talk UVP Touch Max Model No. : UVP-TouchMax Trade Name : UBIQUITI FCC ID. : SWX-UVPTM I HEREBY CERTIFY THAT : The sample was received on Dec. 03, 2019 and the testing was completed on Mar. 27, 2020 at Cerpass Technology Corp. The test result refers exclusively to the test presented test model / sample. Without written approval of Cerpass Technology Corp., the test report shall not be reproduced except in full. Approved by: Mark Liao / Supervisor Laboratory Accreditation: Cerpass Technology Corporation Test Laboratory CERPASS TECHNOLOGY CORP. Report No.: TEFU1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 T-FD-503-0 Ver 1.2 Page No. : 2 of 29 FCC ID. : SWX-UVPTM Contents 1. Summary of Test Procedure and Test Results ................................................................................. 4 1.1 Applicable Standards ................................................................................................................. 4 2. Test Configuration of Equipment under Test ................................................................................... 5 2.1 Feature of Equipment under Test ............................................................................................... 5 2.2 Test Mode and Test Software ..................................................................................................... 6 2.3 Description of Test System ......................................................................................................... 7 2.4 General Information of Test ........................................................................................................ 8 2.5 Measurement Uncertainty .......................................................................................................... 8 3. Test Equipment and Ancillaries Used for Tests ............................................................................... 9 4. Test of AC Power Line Conducted Emission ................................................................................. 11 4.1 Test Result and Data ................................................................................................................ 11 4.2 Test Photographs (30MHz ~ 1GHz) ......................................................................................... 15 5. Test of Spurious Emission (Radiated) ............................................................................................ 16 5.1 Test Limit .................................................................................................................................. 16 5.2 Test Procedures ....................................................................................................................... 16 5.3 Typical Test Setup .................................................................................................................... 17 5.4 Test Result and Data (9kHz ~ 30MHz) ..................................................................................... 18 5.5 Test Result and Data (30MHz ~ 1GHz) .................................................................................... 18 5.6 Test Result and Data (1GHz ~ 40GHz) .................................................................................... 22 5.7 Restricted Bands of Operation ................................................................................................. 26 5.8 Test Photographs (30MHz ~ 1GHz) ......................................................................................... 27 5.9 Test Photographs (1GHz ~ 40GHz) ......................................................................................... 28 CERPASS TECHNOLOGY CORP. Report No.: TEFU1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 T-FD-503-0 Ver 1.2 Page No. : 3 of 29 FCC ID. : SWX-UVPTM History of this test report Report No. Issue Date Description TEFU1912016 Apr. 07, 2020 Original CERPASS TECHNOLOGY CORP. Report No.: TEFU1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 T-FD-503-0 Ver 1.2 Page No. : 4 of 29 FCC ID. : SWX-UVPTM 1. Summary of Test Procedure and Test Results 1.1 Applicable Standards ANSI C63.10:2013 FCC Rule . Description of Test Result 15.203 . CO-LOCATION PASS *The lab has lowered the uncertainty risk of test equipment, environment, and staff technicians according to ISO-IEC17025. Therefore we define test result as compliant when it complies with the standard without further evaluation of test result uncertainty. *This EUT has been also tested and compiled with the requirement of FCC Part 15, Subpart B, recorded in a separate test report(TEFD1912016). CERPASS TECHNOLOGY CORP. Report No.: TEFU1912016 Cerpass Technology Corp. Issued Date : Apr. 07, 2020 T-FD-503-0 Ver 1.2 Page No. : 5 of 29 FCC ID. : SWX-UVPTM 2. Test Configuration of Equipment under Test 2.1 Feature of Equipment under Test Frequency Range BT / BLE: 2400-2483.5MHz 802.11b/g/n: 2400-2483.5MHz 802.11a/n/ac: 5150-5250MHz, 5250-5350MHz, 5470-5725MHz, 5725-5850MHz Modulation Type BT: GFSK, π/4-DQPSK, 8DPSK BLE: GFSK 802.11b: CCK, DQPSK, DBPSK 802.11g/n/a: BPSK, QPSK, 16QAM, 64QAM 802.11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM Modulation Technology DSSS, OFDM, FHSS, DTS Data Rate BT: GFSK: 1Mbps, π/4-DQPSK: 2Mbps, 8DPSK: 3Mbps BLE: GFSK: 1Mbps WLAN: 802.11b: 1, 2, 5.5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n: MCS0 – MCS7, HT20/40 802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11ac: MCS0 – MCS9, VHT20/40/80 Antenna Type Internal Antenna Antenna Gain 2400-2480MHz: 0dBi For BT/BLE For WLAN: 2400-2483.5MHz: 2dBi 5150-5850MHz: 4.5dBi Firmware Number v2.0.59 Note: 1.For more details, please refer to the User’s manual of the EUT. 2.EUT supports DFS Client …

Text truncated - open the document above for the full version.

CERPASS TECHNOLOGY CORP. Report No.: TEFS1912016 CERPASS TECHNOLOGY CORP. Issued date : Apr. 07, 2020 T-FD-501-0 Ver 1.2 Page No. : 1 of 23 FCC ID. : SWX-UVPTM FCC DFS TEST REPORT Applicant : Ubiquiti Inc. Address : 685 Third Avenue, New York, New York 10017, USA Equipment : UniFi Talk UVP Touch Max Model No. : UVP-TouchMax Trade Name : UBIQUITI FCC ID. : SWX-UVPTM I HEREBY CERTIFY THAT : The sample was received on Dec. 03, 2019 and the testing was completed on Dec. 11, 2019 at Cerpass Technology Corp. The test result refers exclusively to the test presented test model / sample. Without written approval of Cerpass Technology Corp., the test report shall not be reproduced except in full. Approved by: Mark Liao / Supervisor Laboratory Accreditation: Cerpass Technology Corporation Test Laboratory CERPASS TECHNOLOGY CORP. Report No.: TEFS1912016 CERPASS TECHNOLOGY CORP. Issued date : Apr. 07, 2020 T-FD-501-0 Ver 1.2 Page No. : 2 of 23 FCC ID. : SWX-UVPTM CONTENTS 1. Summary of Test Procedure and Test Results ...................................................................................... 4 1.1. Applicable Standards ................................................................................................................. 4 2. Test Configuration of Equipment under Test ......................................................................................... 5 2.1. Feature of Equipment under Test ............................................................................................... 5 2.2. Description of Test System ......................................................................................................... 5 2.3. General Information of Test ........................................................................................................ 6 2.4. Measurement Uncertainty .......................................................................................................... 6 3. Test Equipment and Ancillaries Used for Tests ..................................................................................... 7 4. Antenna Requirements ......................................................................................................................... 8 4.1. Standard Applicable ................................................................................................................... 8 4.2. Antenna Construction and Directional Gain ............................................................................... 8 5. Dynamic Frequency Selection .............................................................................................................. 9 5.1. List of Measurement and Examinations ..................................................................................... 9 5.2. Test Setup ................................................................................................................................ 11 5.3. DFS Detection Threshold ......................................................................................................... 13 5.4. Channel Availability Check Time .............................................................................................. 15 5.5. Radar Burst at the Beginning of the Channel Availability Check Time .................................... 16 5.6. Radar Burst at the End of the Channel Availability Check Time .............................................. 17 5.7. U-NII Detection Bandwidth ....................................................................................................... 18 5.8. Statistical Performance Check ................................................................................................. 19 5.9. In-Service Monitoring ............................................................................................................... 20 5.10. Non-Occupancy Period ............................................................................................................ 22 5.11. EUT Setup Photos ................................................................................................................... 23 CERPASS TECHNOLOGY CORP. Report No.: TEFS1912016 CERPASS TECHNOLOGY CORP. Issued date : Apr. 07, 2020 T-FD-501-0 Ver 1.2 Page No. : 3 of 23 FCC ID. : SWX-UVPTM History of this test report Report No. Issue Date Description TEFS1912016 Apr. 07, 2020 Original CERPASS TECHNOLOGY CORP. Report No.: TEFS1912016 CERPASS TECHNOLOGY CORP. Issued date : Apr. 07, 2020 T-FD-501-0 Ver 1.2 Page No. : 4 of 23 FCC ID. : SWX-UVPTM 1. Summary of Test Procedure and Test Results 1.1. Applicable Standards ANSI C63.10:2013 FCC Rules and Regulations Part 15 Subpart E §15.407 KDB789033 KDB905462 FCC Rule Description of Test Result 15.407 Dynamic Frequency Selection PASS *The lab has lowered the uncertainty risk of test equipment, environment, and staff technicians according to ISO-IEC17025. Therefore we define test result as compliant when it complies with the standard without further evaluation of test result uncertainty. CERPASS TECHNOLOGY CORP. Report No.: TEFS1912016 CERPASS TECHNOLOGY CORP. Issued date : Apr. 07, 2020 T-FD-501-0 Ver 1.2 Page No. : 5 of 23 FCC ID. : SWX-UVPTM 2. Test Configuration of Equipment under Test 2.1. Feature of Equipment under Test Frequency Range BT / BLE: 2400-2483.5MHz 802.11b/g/n: 2400-2483.5MHz 802.11a/n/ac: 5150-5250MHz, 5250-5350MHz, 5470-5725MHz, 5725-5850MHz Modulation Type BT: GFSK, π/4-DQPSK, 8DPSK BLE: GFSK 802.11b: CCK, DQPSK, DBPSK 802.11g/n/a: BPSK, QPSK, 16QAM, 64QAM 802.11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM Modulation Technology DSSS, OFDM, FHSS, DTS Data Rate BT: GFSK: 1Mbps, π/4-DQPSK: 2Mbps, 8DPSK: 3Mbps BLE: GFSK: 1Mbps WLAN: 802.11b: 1, 2, 5.5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n: MCS0 – MCS7, HT20/40 802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11ac: MCS0 – MCS9, VHT20/40/80 Antenna Type Internal Antenna Antenna Gain 2400-2480MHz: 0dBi For BT/BLE For WLAN: 2400-2483.5MHz: 2dBi 5150-5850MHz: 4.5dBi…

Text truncated - open the document above for the full version.

CERPASS TECHNOLOGY CORP. Report No.: TEFE1912016 CERPASS TECHNOLOGY CORP. Issued date : Apr. 07, 2020 T-FD-511-0 V1.2 Page No. : 1 of 166 FCC ID : SWX-UVPTM FCC RADIO TEST REPORT Applicant : Ubiquiti Inc. Address : 685 Third Avenue, New York, New York 10017, USA Equipment : UniFi Talk UVP Touch Max Model No. : UVP-TouchMax Trade Name : UBIQUITI FCC ID. : SWX-UVPTM I HEREBY CERTIFY THAT : The sample was received on Dec. 03, 2019 and the testing was completed on Mar. 27, 2020 at Cerpass Technology Corp. The test result refers exclusively to the test presented test model / sample. Without written approval of Cerpass Technology Corp., the test report shall not be reproduced except in full. Approved by: Mark Liao / Supervisor Laboratory Accreditation: Cerpass Technology Corporation Test Laboratory CERPASS TECHNOLOGY CORP. Report No.: TEFE1912016 CERPASS TECHNOLOGY CORP. Issued date : Apr. 07, 2020 T-FD-511-0 V1.2 Page No. : 2 of 166 FCC ID : SWX-UVPTM CONTENTS 1. Summary of Test Procedure and Test Results ...................................................................................... 5 1.1. Applicable Standards ................................................................................................................. 5 2. Test Configuration of Equipment under Test ......................................................................................... 6 2.1. Feature of Equipment under Test ............................................................................................... 6 2.2. Carrier Frequency of Channels .................................................................................................. 7 2.3. Test Mode and Test Software ..................................................................................................... 9 2.4. Description of Test System ....................................................................................................... 10 2.5. General Information of Test ...................................................................................................... 11 2.6. Measurement Uncertainty ........................................................................................................ 11 3. Test Equipment and Ancillaries Used for Tests ................................................................................... 12 4. Antenna Requirements ....................................................................................................................... 14 4.1. Standard Applicable ................................................................................................................. 14 4.2. Antenna Construction and Directional Gain ............................................................................. 14 5. Test of AC Power Line Conducted Emission ...................................................................................... 15 5.1. Test Limit .................................................................................................................................. 15 5.2. Test Procedures ....................................................................................................................... 15 5.3. Typical Test Setup .................................................................................................................... 16 5.4. Test Result and Data ................................................................................................................ 17 5.5. Test Photographs ..................................................................................................................... 19 6. Test of Spurious Emission (Radiated) ................................................................................................. 20 6.1. Test Limit .................................................................................................................................. 20 6.2. Test Procedures ....................................................................................................................... 21 6.3. Typical Test Setup .................................................................................................................... 22 6.4. Test Result and Data (9kHz ~ 30MHz) ..................................................................................... 23 6.5. Test Result and Data (30MHz ~ 1GHz) .................................................................................... 23 6.6. Test Result and Data (1GHz ~ 40GHz) .................................................................................... 25 6.7. Restricted Bands of Operation ............................................................................................... 109 6.8. Test Photographs (30MHz ~ 1GHz) ....................................................................................... 110 6.9. Test Photographs (1GHz ~ 40GHz) ....................................................................................... 111 7. On Time, Duty Cycle and Measurement methods ............................................................................ 113 7.1. Test Limit ................................................................................................................................ 113 7.2. Test Procedure ....................................................................................................................... 113 7.3. Test Setup Layout .................................................................................................................. 113 7.4. Test Result and Data .............................................................................................................. 113 7.5. Measurement Methods .......................................................................................................... 113 8. 6dB Bandwidth & 99% Occupied Bandwidth .................................................................................... 115 8.1. Test Limit ...................................…

Text truncated - open the document above for the full version.

CERPASS TECHNOLOGY CORP. Report No.: TEFE1912016 CERPASS TECHNOLOGY CORP. Issued date : Apr. 07, 2020 T-FD-511-0 V1.2 Page No. : 82 of 166 FCC ID : SWX-UVPTM Power : AC 120V / 60Hz Pol/Phase : HORIZONTAL Test Mode : Mode 4, Band 3, CH122 : CERPASS TECHNOLOGY CORP. Report No.: TEFE1912016 CERPASS TECHNOLOGY CORP. Issued date : Apr. 07, 2020 T-FD-511-0 V1.2 Page No. : 83 of 166 FCC ID : SWX-UVPTM Power : AC 120V / 60Hz Pol/Phase : VERTICAL Test Mode : Mode 1, Band 3 Straddle Channel, CH144 : CERPASS TECHNOLOGY CORP. Report No.: TEFE1912016 CERPASS TECHNOLOGY CORP. Issued date : Apr. 07, 2020 T-FD-511-0 V1.2 Page No. : 84 of 166 FCC ID : SWX-UVPTM Power : AC 120V / 60Hz Pol/Phase : HORIZONTAL Test Mode : Mode 1, Band 3 Straddle Channel, CH144 : CERPASS TECHNOLOGY CORP. Report No.: TEFE1912016 CERPASS TECHNOLOGY CORP. Issued date : Apr. 07, 2020 T-FD-511-0 V1.2 Page No. : 85 of 166 FCC ID : SWX-UVPTM Power : AC 120V / 60Hz Pol/Phase : VERTICAL Test Mode : Mode 2, Band 3 Straddle Channel, CH144 : CERPASS TECHNOLOGY CORP. Report No.: TEFE1912016 CERPASS TECHNOLOGY CORP. Issued date : Apr. 07, 2020 T-FD-511-0 V1.2 Page No. : 86 of 166 FCC ID : SWX-UVPTM Power : AC 120V / 60Hz Pol/Phase : HORIZONTAL Test Mode : Mode 2, Band 3 Straddle Channel, CH144 : CERPASS TECHNOLOGY CORP. Report No.: TEFE1912016 CERPASS TE…

Text truncated - open the document above for the full version.