SZQ-T101Wireless Charger.

4 1 Power-up the VÜ by attaching the chargingcord to the charging port located on the undersideof the unit. Plug the charger into a wall socket for power. 2 3 Specifications : Input: 12V / 750mAOutput: 5W Included:VÜ PadAC Power SupplyUsers guid e ©2013 TYLT. All rights reserved. TYLT® and the TYLT® logo are registered trademarks of Foreign Trade Corp. Other marks are the property of their respective owners. IC2094B Charging Platform LED Indicator Light Cord Slot Charging Port AC Power Supply Place your Qi™ compatible device on the VÜ pad to begin charging. While the VÜ pad is charging a device, the Green LED will turn on. Upon completion of charge, the LED will turn off. Under any type of error condition, the Red LED will turn on. In case of an error condition, remove the phone and place it back on the pad. If this does not solve the problem, unplug the VÜ from the AC charger and re-connect it. NOTE: If the Red LED blinksand does not stay solid,the error condition hasbeen automatically resolved StandbyError!Charging LED indicator light VÜ WIRELESS CHARGING PADUser Guide 1. The VÜ is for charging wireless charging enabled and Qi™Charging Standard compatible smartphones only. 2. The charging unit should only be used at normal indoor room conditions. 3. Place charger on a hard flat surface.4. Never use any power cable and transformer other than those originally supplied with the charging unit. 5. The VÜ may become hot during charging. Avoid direct contact with highly flammable materials. Avoid contact with fine furniture finishes. FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. CAUTIONS: - Place charger on a hard flat surface.- When cleaning the charger, use a soft damp cloth only. Do not wet the exposed metal part of the charging unit. Do not use solvents or scouring agents as they may mark the LED and casing. - Do not submerge in water or rinse under faucet.- Keep the device dry. Precipitation, humidity, liquids and moisture can contain minerals that corrode electronic circuits. - If the device gets wet, immediately unplug it and allow it to dry- Do not disassemble or make any repair attempts to the unit. -Do not store the device in high or low temperatures. CARE AND MAINTENANCE: For more information on the VÜ, wireless charging, Qi ™ Charging Standard and a list of compatible smartphones, please visit: www.TYLT.com/VÜ • Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules [and with RSS-210 of Industry Canada].Operation is subject to the following two conditions:1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. To comply with FCC and other RF exposure requirements, please maintain a distance of 20cm between the charger and your body when in use.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Changes or modifications made to this equipment not expressly approved by the manufacturer may void the FCC authorization to operate this equipment.FCC ID: SZQ-T101 2 Sided 6 panel folded User Guide4/4 (CMYK) 3.5“ inches 21“ inches 2.125” inches FOLD FOLD FOLD FOLD FOLD FOLD FOLD FOLD FOLDFOLD

Federal Communication Commission Equipment Authorization Devision, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 6/20-2014 TO WHOM IT MAY CONCERN FCC ID: SZQ-T101 We the undersigned hereby authorize Salcomp Inc and SGS-CSTC Standards Technical Services Co., LTD to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Salcomp Inc and SGS-CSTC Standards Technical Services Co., LTD, on our behalf shall have the same effect as acts of our own. The authorization is valid for 90 days from the date of this letter. Sincerely, Vahid Zarie CTO ( Chief Technical Officer)

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 6/20-2014 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name SZQ‐T101 VUx-T For the product stated above, we request permanent confidentiality for exhibits which contain Operational Description, Block Diagram, and Schematics. The above exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Vahid Zarie CTO ( Chief Technical Officer)

Version Date/Sign CR No. Material: Colour: Product: Title: Scale Associated Sys CorelDRAW13 Design Draw Check Appd WLS1 CI PAD Type label_SW04A00B_Universal_Black 1:1 19.03.14 22.05.14 Dwang Dwang Code: ZzXXXX See Note(Material description) See Note(Material description) Draw: 600XXXX Scan 1:1 Note: YY = Year,2 digits (12=2012, 13=2013, 14=2014,etc.) MM= Month, 2 digits from 01-12 SS= Series number 6 digits staring from 0...01 every month LL= Production line number , 2 digits ... YYMMSSSSSSLL Material description: 1. Material: 0.05mm matte silver PET film; 2. Surface: 0.025mm matte transparent OPP film; 3. Printing: Black background; 4. Material must fulfill Gwi 4-11 Salcomp Hazardous Substances Management Standard latest version. Model:VUBK-T Input: DC 12V, 750mA Output: 5W FCC ID:SZQ-T101 QR Code print by Salcomp 7.8+/-0.2mm Version Date/Sign CR No. Material: Colour: Product: Title: Scale Associated Sys CorelDRAW13 Design Draw Check Appd WLS1 CI PAD Type label_SW04A00G_Universal_Green 1:1 19.03.14 22.05.14 Dwang Dwang Code: ZzXXXX See Note(Material description) See Note(Material description) Draw: 600XXXX Scan 1:1 Note: YY = Year,2 digits (12=2012, 13=2013, 14=2014,etc.) MM= Month, 2 digits from 01-12 SS= Series number 6 digits staring from 0...01 every month LL= Production line number , 2 digits YYMMSSSSSSLL Material description: 1. Material: 0.05mm matte silver PET film; 2. Surface: 0.025mm matte transparent OPP film; 3. Printing: Black background; 4. Material must fulfill Gwi 4-11 Salcomp Hazardous Substances Management Standard latest version. Model:VUG-T Input: DC 12V, 750mA Output: 5W FCC ID:SZQ-T101 41+/-0.2 mm 5+/-0.2 mm 31.2+/-0.2 mm Size 10*10mm Size 12*12mm 7.8+/-0.2mm Version Date/Sign CR No. Material: Colour: Product: Title: Scale Associated Sys CorelDRAW13 Design Draw Check Appd WLS1 CI PAD Type label_SW04A00L_Universal_Blue 1:1 19.03.14 22.05.14 Dwang Dwang Code: ZzXXXX See Note(Material description) See Note(Material description) Draw: 600XXXX Scan 1:1 Model:VUBL-T Input: DC 12V, 750mA Output: 5W FCC ID:SZQ-T101 41+/-0.2 mm 55.9+/-0.2 mm 5+/-0.2 mm 31.2+/-0.2 mm Size 10*10mm Size 12*12mm 7.8+/-0.2mm Version Date/Sign CR No. Material: Colour: Product: Title: Scale Associated Sys CorelDRAW13 Design Draw Check Appd WLS1 CI PAD Type label_SW04A00R_Universal_Red 1:1 19.03.14 20.05.14 Dwang Dwang Code: ZzXXXX See Note(Material description) See Note(Material description) Draw: 600XXXX Scan 1:1 Note: YY = Year,2 digits (12=2012, 13=2013, 14=2014,etc.) MM= Month, 2 digits from 01-12 SS= Series number 6 digits staring from 0...01 every month LL= Production line number , 2 digits ... YYMMSSSSSSLL Material description: 1. Material: 0.05mm matte silver PET film; 2. Surface: 0.025mm matte transparent OPP film; 3. Printing: Black background; 4. Material must fulfill Gwi 4-11 Salcomp Hazardous Substances Management Standard latest version. 41+/-0.2 mm 55.9+/-0.2 mm 31.2+/-0.2 mm 7.8+/-0.2mm

Internal Photo

SGS-CSTC Standards Technical Services Co., Ltd. 19 8 Ke zhu Roa d, Scient ech Park, Guangzhou Economic & Technolo gical De velopment D istrict, Guangzhou, China 510663 Telephon e: +86 (0) 20 8 2155555 Fax: +86 (0) 20 820750 59 Email: ee. guangzh [email protected] Report No.: GZEM140700331601 Page: 1 of 12 FCC ID:SZQ-T101 Authorized Signature: Richard Li Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 1 Cover Page TEST REPORT Application No.: GZEM1407003316RF Applicant: Salcomp (Shenzhen) Co., Ltd. Manufacturer: Salcomp (Shenzhen) Co., Ltd. Factory: Salcomp (Shenzhen) Co., Ltd. Salcomp Industrial Eletrônica da Amazônia Ltda Salcomp Manufacturing India Pvt Ltd. FCC ID: SZQ-T101 Product Name: Vu Product Description: Low Power Transmitter Model No.: VUx-T, the x is color code , which may be “BK”,”G”,”RD”and”BL”,BK=Black, G=Green ,RD=Red, BL= Blue ♣ ♣ Please refer to section 3 of this report for further details. Trade mark: TYLT Standards: KDB 680106 D01v02. Date of Receipt: 2014-07-04 Date of Test: 2014-07-04 to 2014-07-11 Date of Issue: 2014-07-14 Test Result : Pass* * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 3 of this report for further detail. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM140700331601 Page: 2 of 12 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-07-14 Original Authorized for issue by: Tested By 2014-07-04 to 2014-07-11 (Jack Liang) /Project Engineer Date Prepared By 2014-07-11 (Jack Liang) /Project Engineer Date Checked By 2014-07-14 (Fred Zhu) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM140700331601 Page: 3 of 12 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 3 Content 1 COVER PAGE ..........................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological Development District, Guangzhou, China 510663 Telephone: +86 (0) 20 82155555 Fax: +86 (0) 20 82075059 Email: [email protected] Report No.: GZEM140700331601 Page: 1 of 31 FCC ID:SZQ-T101 Authorized Signature: Richard Li Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 1 Cover Page TEST REPORT Application No.: GZEM1407003316RF Applicant: Salcomp (Shenzhen) Co., Ltd. Manufacturer: Salcomp (Shenzhen) Co., Ltd. Factory: Salcomp (Shenzhen) Co., Ltd. Salcomp Industrial Eletrônica da Amazônia Ltda Salcomp Manufacturing India Pvt Ltd. FCC ID: SZQ-T101 Product Name: Vu Product Description: Low Power Transmitter Model No.: VUx-T, the x is color code , which may be “BK”,”G”,”RD”and”BL”,BK=Black, G=Green ,RD=Red, BL= Blue ♣ ♣ Please refer to section 3 of this report for further details. Trade Mark: TYLT Standards: CFR 47 FCC PART 15 SUBPART C:2013 section 15.207 CFR 47 FCC PART 15 SUBPART C:2013 section 15.209 Date of Receipt: 2014-07-04 Date of Test: 2014-07-04 to 2014-07-11 Date of Issue: 2014-07-14 Test Result : Pass* * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 3 of this report for further details. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM140700331601 Page: 2 of 31 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-07-14 Original Authorized for issue by: Tested By 2014-07-04 to 2014-07-11 (Jack Liang) /Project Engineer Date Prepared By 2014-07-11 (Jack Liang) /Project Engineer Date Checked By 2014-07-14 (Fred Zhu) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM140700331601 Page: 3 of 31 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days onl…

Text truncated - open the document above for the full version.

Test Setup Photo 1.1 RADI ATE D SP URI OU S EM ISSIO N TE ST SETUP 9kHz to 30MHz: 30 MHz to 1 GHz: 1.2 CON DU CTED EM ISSI ON TEST SETUP