T38A1034GSM/GPRS Mobile phone

1 Introduction 1.1 Phone Display We continuously strive to improve our products. Therefore, we reserve the rights to revise this user manual or withdraw it at any time without prior notice. 1.2 Key Key Function Dial / Answer Key Press to answer a call or make a call after you enter a phone number. In idle mode, press to view the call log. End / Power Key Press to end a call. Press and hold to turn the phone on/off. Within a menu, press to return to idle mode. 2 Left Soft Key In idle mode, press to enter the Main Menu. Press to access the option listed directly above it on the display. Right Soft Key In idle mode, press to access the Phonebook. Press to access the option listed directly above it on the display. Within a menu, press to return to the previous screen. OK Key In idle mode, press to enter the Call Center. Press to confirm a selection. Numeric key Press to enter the corresponding number, letter or symbol located on the key. Within a menu, press to access the corresponding menu option. *Key Press the * Key twice quickly to enter ‘+’ to make an international call. Press and hold the * Key to toggle between *, +, (pause character) P, and (wait character) W. Press to enter symbol when editing text. #Key In idle mode, press and hold to activate or deactivate the silent mode. Press to switch input modes when entering text. Navigation Key Within a menu, press Up, Down, Left or Right to scroll through menu options. Note: “Press” in this manual, means to press and release the key; “press and hold” means to press and hold the key for at least 2 seconds. 1.3 Icons & Symbols Icon Description Ne t wo r k - The left portion indicates whether your phone is already registered with a network and the right portion indicates signal strength (from no signal to strongest). Battery - Indicates battery level. When charging, a scrolling icon will be displayed. The more bars, the stronger the charge. 3 To log onto GPRS - The icon will be displayed only when you have logged onto GPRS. MMS - Indicates you have one or more unread MMS messages. Message - Indicates you have one or more unread messages. Push Message-Indicates that you have received a ne w push message. Voicemail- Indicates voice messages that have not been heard. Missed Call - Indicates there is a missed call. Call Divert - Indicates that “Divert All Voice Calls” is activated. Alarm-Indicates that the alarm clock is on. Headset-Indicates that headset profile is activated. Alert type is “Ring”. 2 Getting Started Please read the safety instructions in the "Safety Information and Notices" section before use. 2.1 Inserting the SIM Card 2.1.1 Remove the back cover(1), remove the batte r y (2), an d inse rt the SIM car d (3) (1) 4 (2) (3) 2.1.2 Install the batter y (4 ) and back cover (5) (4) (5) 2.2 Turning the phone on To turn the phone on, press and hold the End / Power key. Enter the PIN code if required. 2.3 Charging the Battery 1. To charge the battery, plug in the charger connector at the bottom of your phone (USB interface) and then plug the other end into an AC power socket. 2. The battery symbol indicates the charging status. While charging, the charge indicators will scroll. 3. Disconnect the charger from the phone. 4. Disconnect the charger from the AC power socket. 5 Note: If the battery is powerless, the battery icon will reappear after a few minutes of charging. 2.4 Inserting a T-Flash Card With the metal contacts facing down, gently slide the T-F lash card into the slot. 2.5 Important Password Phone lock password is 1234. 3 Text Entry 3.1 Input Method During text editing, you can press the # Ke y to switch input modes or press the Left Soft Key [Options] and select Input me thod to select different input modes. 3.1.1 Entering Symbols In any input mode, press the * Key to open the symbols input screen. 3.2 Smar t Input Method 2 to 9 Press to input letters. 1 Press to input symbol. 0 Press to input space. ◀/▶ Press to confirm the letter or word, or move the cursor to the left or right. ▲/▼ Press to browse the last or next available word. 6 Left Soft Key (Select) or the OK Key Press to confirm the letter or word. Right Soft Key (Clear) Press to clear a letter, press and hold to clear all entries. # Switch between input mode. * Press to activate punctuation mode Example: How to enter the word "HOME" 1. Press the # Key to switch to ABC; 2. Press 4 6 6 3, the first word “GOOD” appears; 3. Press ▶ to browse and select “HOME”; 4. Press the Left Soft Key [Select] or OK Key to confirm “HOME”. 3.3 Mu lt i-tap Input Using this mode requires you to press a key as many times as needed to enter the desired letter. To enter the word “casa” in Multi-tap input mode “ abc”, pr e ss key 2 (ABC) three times, press 2 (ABC) once, press key 7 (PQRS) four times, press key 2 (ABC) once. 3.4 Numer ic Input Press the # Key to select "123" then you can enter the numbers. 4 Calling 4.1 Mak ing a Call Note: You can make a call only when the network name appears on the screen. 1. In idle mode,enter the phone number. 2. Press the Dial / Answer Key to dial the number. 3. Press the End / Power Key to end the call. Note: During a call, press the Navigation Key Up/Down to adjust the volume. You can press the Left Soft Key [Options] to choose Sound Re corder. Note: In most countries, recording telephone conversations is 7 subject to legislation. We advise you to notify the caller if you intend to record your conversation and only do so if they agree. 4.2 Making an International Call 1. Press the * Key twice quickly until "+" appears on the screen. 2. Enter the country code. 3. Enter the area code (normally without the 0 before it) followed by the phone number. 4. Press the Dial / Answer Key to call directly. 4.3 Answering or Rejecting a incoming Call 1. Press the Dial / Answer Key to answer a call. 2. Press the End / Power key to reject a call. 5 Function Menu 5.1 Main Menu STK Messaging Call center Fun & Games Services Phonebook Organizer Multimedia Settings 5.2 STK S…

Text truncated - open the document above for the full version.

IAC Compliance Laboratory, No.789 Pu Xing Road,Shanghai,PRC Declaration We, IAC Compliance Laboratory the undersigned hereby declare, that the test performed by IAC Compliance Laboratory to the following Report No(project).: 20120917FCC-A 20120917FCC-D 20120917SAR The Test Results relate only to the samples tested. − Point of contact: Jeff Huang TEL: +86-21-5433-6899 FAX: +86-21-5431-5010 [email protected]; (Name, telephone and fax number) Shanghai Date: 2012/9/25 (Place, date of issue) (Signature) Jeff Huang / Manager (Name and title in block letters)

IAC Report No. : 20120917EP1 Page : 1 of 7 Version:1.0 Annex external Photographs IAC Report No. : 20120917EP1 Page : 2 of 7 Version:1.0 IAC Report No. : 20120917EP1 Page : 3 of 7 Version:1.0 IAC Report No. : 20120917EP1 Page : 4 of 7 Version:1.0 IAC Report No. : 20120917EP1 Page : 5 of 7 Version:1.0 IAC Report No. : 20120917EP1 Page : 6 of 7 Version:1.0 IAC Report No. : 20120917EP1 Page : 7 of 7 Version:1.0

IAC Report No. : 20120917EP3 Page : 1 of 2 Version:1.0 Annex Label exhibit IAC Report No. : 20120917EP3 Page : 2 of 2 Version:1.0

IAC Report No. : 20120917EP2 Page : 1 of 5 Version:1.0 Annex internal Photographs IAC Report No. : 20120917EP2 Page : 2 of 5 Version:1.0 IAC Report No. : 20120917EP2 Page : 3 of 5 Version:1.0 IAC Report No. : 20120917EP2 Page : 4 of 5 Version:1.0 IAC Report No. : 20120917EP2 Page : 5 of 5 Version:1.0

IAC Report No.:20120917SAR Page : 1 of 60 Version:1.0 SAR Test Report Product Name : GSM 850/900/1800/1900 GPRS Mobile Phone Model No. : A1034 FCC ID : T38A1034 Prepared By: : Inventec Appliances(Pudong) Corporation Address: : No.789 Pu Xing Road,Shanghai,PRC Date of Receipt : 2012.09.17 Date of Test : 2012.09.17-2012.09.25 Report No. : 20120917SAR IAC Report No.:20120917SAR Page : 2 of 60 Version:1.0 Test Report Certification Date of Issue : Sep.25.2012 Report No. : 20120917SAR Product Name : GSM 850/900/1800/1900 GPRS Mobile Phone Model No. : A1034 Trade Name : CLARO Applicant : Cellon Communications Technology (Shenzhen) Co.,Ltd. Address : 13/F, Skyworth C Building, Gaoxin S.Ave1, Hi-Tech I ndustrial Park, Nanshan District, Standard : FCC 47 CFR Part2 (2.1093) IEEE C95.1-1999 IEEE 1528-2003 FCC OET Bulletin 65 supplement C Test Result : Head: 1.372W/ kg( 1g); 0.769W/kg(10g) Body: 1.374W/kg(1g); 0.936W/kg(10g) The Test Results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of Inventec Appliances(Pudong) Corporation Documented By : , Sep.25.2012 Judy Ge/Engineer Tested By : , Sep.25.2012 Alice Lee/Engineer Approved By : , Sep.25.2012 Jeff Huang/Director of Operations IAC Report No.:20120917SAR Page : 3 of 60 Version:1.0 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ........................................................................................................................................ 4 1.1. APPLICANT ............................................................................................................................................................... 4 1.2. MANUFACTURER ...................................................................................................................................................... 4 1.3. TEST ENVIRONMENT ................................................................................................................................................ 4 2. SAR MEASUREMENT SYSTEM................................................................................................................................ 5 2.1. ALS AS-10U SYSTEM DESC R IPT ION ........................................................................................................................ 5 2.2. ISOTROPIC E-FIE LD PRO BE....................................................................................................................................... 7 2.3. BOUNDARY DETECTION UNIT AND PROBE MOUNTING DEVICE ................................................................................ 8 2.4. DAQ-PAQ (ANALOG TO DIG ITA L ELECTRONICS)....................................................................................................... 9 2.5. AXIS ARTICULATED ROBOT ...................................................................................................................................... 9 2.6. ALS AS UNIVERSAL WO R KS TAT IO N ....................................................................................................................... 10 2.7. UNIVERSAL DEVICE POS IT ION ER............................................................................................................................ 10 2.8. PHONTOM TYPES .................................................................................................................................................... 11 3. TISSUE SIMULATING LIQUID ............................................................................................................................... 12 3.1. THE COMPOSITION OF THE TISSUE SIMULATING LIQ UID .......................................................................................... 12 3.2. TISSUE CALIBRATION RE S U LT ................................................................................................................................ 13 3.3. TISSUE DIELECTRIC PARA METERS FO R HEAD AND BODY PHANTOMS .................................................................... 15 4. SAR MEASUREMENT PROCEDURE ..................................................................................................................... 16 4.1. SAR SYSTEM VA LIDAT ION ..................................................................................................................................... 16 4.2. ARRANGEMENT ASSESSMENT SETUP...................................................................................................................... 22 4.3. SAR MEASUREMENT PROCEDURE ......................................................................................................................... 25 5. SAR EXPOSURE LIMITS.......................................................................................................................................... 26 6. TEST EQUIPMENT LIST .......................................................................................................................................... 27 7. MEASUREMENT UNCERTAINTY .......................................................................................................................... 28 8. TEST RESULTS ........................................................................................................................................................... 30 8.1. SAR TEST RESULT S SUMMA RY .............................................................................................................................. 30 8.2. CONDUCTED POWER(UN IT:DBM) ........................................................................................................................... 33 8.3. SAR MEASUREMENT DATA .................................................................................................................................... 35 IAC Report No.:20120917SAR Page : 4 of 60 Version:1.0 1. GENERAL INFORMATION 1.1. Applicant Company Name: Cellon Communications Technology (Shenzhen) Co.,Ltd. Add…

Text truncated - open the document above for the full version.

NCL CALIBRATION LABORATORIES Calibration File No.: 1364-1375 Client.: IAC C E R T I F I C A T E OF C A L I B R A T I O N It is certified that the equipment identified below has been calibrated in the NCL CALIBRATION LABORATORIES by qualified personnel following recognized procedures and using transfer standards traceable to NRC/NIST. Equipment: Miniature Isotropic RF Probe Record of Calibration Head and Body Manufacturer: APREL Laboratories Model No.: E-020 Serial No.: 500-00273 Calibration Procedure: D01-032-E020-V2, D22-012-Tissue, D28-002-Dipole Project No: ISL-E020-5612 Calibrated: 1 st October 2011 Released on: 5 th October 2011 Approved By: Stuart Nicol NCL CALIBRATION LABORATORIES 303 Terry Fox Drive, Suite 102 Division of APREL Kanata, Ontario TEL: (613) 435-8300 CANADA K2K 3J1 FAX: (613) 435-8306 NCL Calibration Laboratories Division of APREL Inc. Page 2 of 10 This page has been reviewed for content and attested to on Page 2 of this document. Introduction This Calibration Report reproduces the results of the calibration performed in line with the references listed below. Calibration is performed using accepted methodologies as per the references listed below. Probes are calibrated for air, and tissue and the values reported are the results from the physical quantification of the probe through meteorgical practices. Calibration Method Probes are calibrated using the following methods. <1000MHz TEM Cell for sensitivity in air Standard phantom using temperature transfer method for sensitivity in tissue >1000MHz Waveguide* method to determine sensitivity in air and tissue *Waveguide is numerically (simulation) assessed to determine the field distribution and power The boundary effect for the probe is assessed using a standard flat phantom where the probe output is compared against a numerically simulated series of data points References o IEEE Standard 1528 (2003) including Amendment 1 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques o EN 62209-1 (2006) Human Exposure to RF Fields from hand-held and body-mounted wireless communication devices - Human models. instrumentation, and procedures-Part 1: Procedure to measure the Specific Absorption Rate (SAR) for hand-held mobile wireless devices o IEC 62209-2 Ed. 1.0 (2010-03) Human exposure to RF fields from hand-held and body-mounted wireless devices - Human models, instrumentation, and procedures - Part 2: specific absorption rate (SAR) for wireless communication devices (30 MHz - 6 GHz) o TP-D01-032-E020-V2 E-Field probe calibration procedure o D22-012-Tissue dielectric tissue calibration procedure o D28-002-Dipole procedure for validation of SAR system using a dipole o IEEE 1309 Draft Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9kHz to 40GHz NCL Calibration Laboratories Division of APREL Inc. Page 3 of 10 This page has been reviewed for content and attested to on Page 2 of this document. Conditions Probe 500-00273 was a recalibration. **The probe was received in good working order, although at 1900MHz the uncertainty was higher than our standard (see note**) Ambient Temperature of the Laboratory: 22 °C +/- 1.5°C Temperature of the Tissue: 21 °C +/- 1.5°C Relative Humidity: < 60% Primary Measurement Standards Instrument Serial Number Cal due date Power meter Anritsu MA2408A 90025437 Nov.4, 2011 Power Sensor Anritsu MA2481D 103555 Nov 4, 2011 Attenuator HP 8495A (70dB) 1944A10711 Sept. 14, 2011 Network Analyzer Anritsu MT8801C MB11855 Feb. 8, 2012 Secondary Measurement Standards Signal Generator Agilent E4438C -506 MY55182336 June 7, 2012 Attestation The below named signatories have conducted the calibration and review of the data which is presented in this calibration report. NCL Calibration Laboratories Division of APREL Inc. Page 4 of 10 This page has been reviewed for content and attested to on Page 2 of this document. Probe Summary Probe Type: E-Field Probe E020 Serial Number: 500-00273 Frequency: As presented on page 5 Sensor Offset: 1.56 Sensor Length: 2.5 Tip Enclosure: Composite* Tip Diameter: < 2.9 mm Tip Length: 55 mm Total Length: 289 mm *Resistive to recommended tissue recipes per IEEE-1528 Sensitivity in Air Channel X: 1.2 μV/(V/m) 2 Channel Y: 1.2 μV/(V/m) 2 Channel Z: 1.2 μV/(V/m) 2 Diode Compression Point: 95 mV NCL Calibration Laboratories Division of APREL Inc. Page 5 of 10 This page has been reviewed for content and attested to on Page 2 of this document. Calibration for Tissue (Head H, Body B) Frequency Tissue Type Measured Epsilon Measured Sigma Calibration Uncertainty Tolerance Uncertainty for 5%* Conversion Factor 450 H Head X X X X X 450 B Body X X X X X 750 H Head X X X X X 750 B Body X X X X X 850 H Head 42.86 0.95 3.5 3.4 6.5 850 B Body 53.71 1.04 3.5 3.4 6.4 900 H Head 41.5 0.99 3.5 3.4 6.1 900 B Body 53.25 1.04 3.5 3.4 6.3 1450 H Head X X X X X 1450 B Body X X X X X 1500 H Head X X X X X 1500 B Body X X X X X 1640 H Head X X X X X 1640 B Body X X X X X 1750 H Head X X X X X 1750 B Body X X X X X 1800 H Head 36.85 1.35 3.5 2.7 5.5 1800 B Body 52.38 1.5 3.5 2.7 5.4 1900 H Head 38.21 1.46 3.5 2.7 5.7 1900 B Body 52.1 1.59 3.5 2.7 5.4 2000 H Head X X X X X 2000 B Body X X X X X 2100 H Head 39.8 1.49 3.5 2.9 5.0 2100 B Body 53.0 1.58 3.5 2.9 4.9 2300 H Head X X X X X 2300 B Body X X X X X 2450 H Head 38.2 1.84 3.5 3.5 4.65 2450B Body 50.63 1.99 3.5 3.5 4.4 2600 H Head X X X X X 2600 B Body X X X X X 3000 H Head X X X X X 3000 B Body X X X X X 3600 H Head X X X X X 3600 B Body X X X X X 5200 H Head X X X X X 5200 B Body X X X X X 5600 H Head X X X X X 5600 B Body X X X X X 5800 H Head X X X X X 5800 B Body X X X X X NCL Calibration Laboratories Division of APREL Inc. Page 6 of 10 This page has been reviewed for content and attested to on Page 2 of this document. Boundary Effect: Uncertainty resulting from the boundary effect is less tha…

Text truncated - open the document above for the full version.

IAC Report No. 20120917FCC-D Page 1 of 45 Version:1.0 FCC RF Test Report FCC 47 CFR Part 2, 22(H), 24(E) Product Name : GSM 850/900/1800/1900 GPRS Mobile Phone Model No. : A1034 FCC ID : T38A1034 Prepared By: : Inventec Appliances(Pudong) Corporation Address: : No.789 Pu Xing Road,Shanghai,PRC Date of Receipt : 2012.09.17 Date of Test : 2012.09.17-2012.09.25 Report No. : 20120917FCC-D IAC Report No. 20120917FCC-D Page 2 of 45 Version:1.0 Test Report Certification Date of Issue : Sep.25.2012 Report No. : 20120917FCC-D Product Name : GSM 850/900/1800/1900 GPRS Mobile Phone Model No. : A1034 Trade Name : CLARO Applicant : Cellon Communications Technology (Shenzhen) Co.,Ltd. Address : 13/F, Skyworth C Building, Gaoxin S.Ave1, Hi-Tech Industrial Park, Nanshan District, Standard : FCC 47 CFR Part 2, 22(H), 24(E) Classification : PCS Licensed Transmitter Held to Ear (PCE) Test Result : Complied TX/RX Frequency Range : GSM/GPRS 850 824.2 ~ 848.8 MHz 869.2 ~ 893.8 MHz GSM/GPRS 1900 1850.2 ~ 1909.8 MHz 1930.2 ~ 1989.8 MHz The Test Results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of Inventec Appliances(Pudong) Corporation Documented By : ,Sep.25.2012 Judy Ge/Engineer Tested By : ,Sep.25.2012 Alice Lee/Engineer Approved By : ,Sep.25.2012 Jeff Huang/Director of Operations IAC Report No. 20120917FCC-D Page 3 of 45 Version:1.0 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ............................................................................................ 6 1.1 Applicant............................................................................................................................. 6 1.2 Manufacturer ..................................................................................................................... 6 1.3 Feature of Equipment Under Test ..................................................................................... 7 1.4 Applied Standards .............................................................................................................. 8 2. Test Configuration of Equipment Under Test ................................................................... 9 2.1 Conducted Power ............................................................................................................... 9 2.2 Test Mode ............................................................................................................................ 9 2.3 Connection Diagram of Test System ................................................................................ 10 3. Test Result ......................................................................................................................... 11 3.1 Conducted Output Power Measurement ......................................................................... 11 3.1.1 Description of the Conducted Output Power Measurement ........................................... 11 3.1.2 Measuring Instruments .................................................................................................... 11 3.1.3 Test Procedure .................................................................................................................. 11 3.1.4 Test Setup .......................................................................................................................... 11 3.1.5 Test Result of Conducted Output Power .......................................................................... 12 3.2 Effective Radiated Power and Effective Isotropic Radiated Power Measurement ........ 13 3.2.1 Description of the ERP/EIRP Measurement .................................................................. 13 3.2.2 Measuring Instruments .................................................................................................... 13 3.2.3 Test Procedure .................................................................................................................. 13 3.2.4 Test Setup ......................................................................................................................... 14 3.2.5 Test Result of ERP ........................................................................................................... 15 3.2.6 Test Result of EIRP .......................................................................................................... 16 3.3 Occupied Bandwidth Measurement ................................................................................. 17 3.3.1 Description of Occupied Bandwidth Measurement ........................................................ 17 3.3.2 Measuring Instruments .................................................................................................... 17 3.3.3 Test Procedure .................................................................................................................. 17 3.3.4 Test Setup .......................................................................................................................... 17 3.3.5 Test Result (Plots) of Occupied Bandwidth ..................................................................... 18 3.4 Band Edge Measurement ................................................................................................. 24 3.4.1 Description of Band Edge Measurement ........................................................................ 24 3.4.2 Measuring Instruments .................................................................................................... 24 3.4.3 Test Procedure .................................................................................................................. 24 3.4.4 Test Setup .......................................................................................................................... 24 3.4.5 Test Result (Plots) of Conducted Band Edge .................................................................. 25 3.5 Conducted Emission Measurement ............…

Text truncated - open the document above for the full version.

IAC Report No.:20120917EP6 Page 1 of 4 Version:1.0 APPENDIX C. SETUP PHOTOGRAPHS ERP and EIRP Test Setup IAC Report No.:20120917EP6 Page 2 of 4 Version:1.0 FCC Part 22H/24E Radiated Emission below 1GHz - Front -Rear IAC Report No.:20120917EP6 Page 3 of 4 Version:1.0 FCC Part 22H/24E Radiated Emission above 1GHz -F ro nt -Rear IAC Report No.:20120917EP6 Page 4 of 4 Version:1.0 AC Conducted Emission Test Setup

IAC Report No.:20120917EP3 Page 1 of 7 Version:1.0 SAR Test Photographs Left Head (EUT Cheek) Left Head (EUT Tilt) IAC Report No.:20120917EP3 Page 2 of 7 Version:1.0 Right Head (EUT Cheek) Right Head (EUT Tilt) IAC Report No.:20120917EP3 Page 3 of 7 Version:1.0 Body Back+ earphone(1.5cm) Body Front+earphone (1.5cm) IAC Report No.:20120917EP3 Page 4 of 7 Version:1.0 Validation Photo of Liquid Height for Head SAR IAC Report No.:20120917EP3 Page 5 of 7 Version:1.0 Photo of Liquid Height for Body SAR IAC Report No.:20120917EP3 Page 6 of 7 Version:1.0 EUT IAC Report No.:20120917EP3 Page 7 of 7 Version:1.0