T4K3208UVTWO WAY RADIO

A1.140717 IN STRUCTION MANUAL 518UV II THANK YOU! transceiver will provide you with reliable, clear and efficient communication service. The transceiver introduces innovative DSP digital signal processing technology, high degree integration, it is including kinds of professional function, best stability and great reliability as well as exterior smooth lines, novel, fashionable, sturdy and durable. The transceiver is including plenty of TX, RX channels, as well as UU, VV and UV standby modes, can be single U or V band by operation. It is able to realize cross band function, dual PTT function, 51 groups of CTCSS encode/decode and 1 group of user-defined CTCSS encode/decode, 1024 groups of DCS encode/ decode, 5TONE encode/decode, DTMF encode/decode, built-in FM radio functions, etc.. It is a meticulous build functional and Multi frequency band radio for radio amateur. te the frequency and signaling etc., other wise errors may occur because of different frequency band etc. CAUTIONS transceiver is excellent designed with advanced technology. The following tips will be helpful for you in performing your obligation under warranty and understanding the safety of transceiver usage. 1. Keep the transceiver and accessories away from children. 2.Please do not try to open or modify the transceiver without permission, non-professionals operation may also cause damage. 3.Please use assorted battery and charger to avoid damage. 4.Please use assorted antenna to ensure the communication distance. 5.Please avoid exposing the radio under the sunshine for a long time or storing it in too hot places. High temperature will shorten the life of electronic devices. 6.Please avoid storing the radio in the dusty, dirty and damp areas. 7.Please keep the radio dry. Do not wash radio with ardent chemicals and detergents. 8.Do not transmit without antenna. 9.When using this transceiver, we recommend transmitting for 1 minute then receiving for 4 minutes. continuously transmitting for long time or working in high power will heat the back of the transceiver. Do not place the transceiver's hot back close to any plastics. 10.If any abnormal smell or smoke coming from the transceiver, please turn off the power instantly and take off the battery and its case. Then contact local dealers. NOTE： All the above tips apply for your transceivers' accessories. If any device can not operate normally, please contact with local dealers. If you use any accessories made by other companies, company does not guarantee the operability and safety of the transceiver. I TABLE OF CONTENTS UNPACKING ................................................................................................................................................................................................01 Supplied Accessories ......................................................................................................................................................................... 01 ST ANDARD ACCESSORIES/ADDITIONAL ACCESSORIES ............................................................................... 02 Standard Accessories .......................................................................................................................................................................... 02 Additional Accessories ........................................................................................................................................................................ 02 BATTERY INFORMATION .................................................................................................................................................................03 Charging Operation .............................................................................................................................................................................. 03 Battery Charger Type .......... ................................................................................................................................................................. 03 Notice for Charging Battery .............................................................................................................................................................. 03 How to Charge ........................................................................................................................................................................................ 04 Charging Prompt .................................................................................................................................................................................... 06 How to Store the Battery .................................................................................................................................................................... 06 GETTING ACQUAINTED ...................................................................................................................................................................07 LCD Display ............................................................................................................................................................................................. 07 BASIC OPERATIONS ...........................................................................................................................................................................10 Turn the Radio On & OFF ................................................................................................................................................................. 10 Adjusting Volume ................................................................................................................................................................................... 10 Switch between Main band and Sub band ............................................................................................................................... 11 Swi…

Text truncated - open the document above for the full version.

Qixiang Electron Science & Technology Co., Ltd. Attestation Statement Hereby we declare that this radio (FCC ID: T4K3208UV) is compliant with Rule Part 90.203(e). The operator cannot program and transmit on frequencies, other than those programmed by the manufacturer, service or maintenance personnel, using the equipment's external operation controls. Signatory Ken Xu Qixiang Electron Science& Technology Co., Ltd [email protected]

Date:May 15, 2014 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: Qixiang Electron Science& Technology Co., Ltd. the undersigned, hereby authorizes Ms. Ivy Zhu from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of Qixiang Electron Science& Technology Co., Ltd solely in matters relating to the application for an FCC equipment authorization for FCC ID: T4K3208UV including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen Morlab Communications Technology Co., Ltd on our behalf of Qixiang Electron Science& Technology Co., Ltd in connection with the Application shall have the same effect as acts of Qixiang Electron Science& Technology Co., Ltd. Qixiang Electron Science& Technology Co., Ltd also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Thank you for your attention to this matter. Signatory Ken Xu Qixiang Electron Science& Technology Co., Ltd [email protected]

Date: 2014-08-01 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Qixiang Electron Science& Technology Co., Ltd FCC ID:T4K3208UV Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. Qixiang Electron Science& Technology Co., Ltd requests that the following documents regarding this submission for FCC ID: T4K3208UV be kept confidential: Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf Operational Description Operational Description.pdf Part list BOM.pdf Tune-Up-Procedure Tune up procedure.pdf Those documents contain detailed system and equipment description and related information about the product which Qixiang Electron Science& Technology Co., Ltd considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, Qixiang Electron Science& Technology Co., Ltd considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Signatory Ken Xu Qixiang Electron Science& Technology Co., Ltd [email protected]

"曾任 Bay Area Compliance Labs Corp.(Shenzhon) 6/F, the 3rd Phase ofWan Li Industrîal Bldg., Shìhua Rd., FuTian Free Trade Zone, Shenzhen, China τel: +8675533320018 Fax: +86 755 33320008 Oat e ofTest Applicant Nam e : FCC ID Te st Item s: Nam e of Engineer Pe rforming Test St at em e nt of Compliance: The m eas urem ents w er e m ade at: Test lab Witness Signature of Test Lab Witness: Full Na me, Typed : Test Lab Attestation Letter 2014-07-25 Qix旧ngElectron 5cìence & Technology Co.,ltd. Quanzhou T4K3208UV FCC 5AR Betl (Test lab) declares that thìs Unit has been tested in accordance w ith the test method ident而edin this test report and that we 。bservedit being tested. It also declares that the Unit complies 、，viththe relevant limits. AtI instrumentation and accessories used to test this unit for compliance to the indicated test method are calibrated regularly in accordance with 1 50 17025:2005 requirements by laboratories accredited by A2LA, NVLAP, or AClAS for the measurement parameters Bay Area Comptiance Labs Corp.(Shenzhen) 自F，the 3rd Phase of Wan Li Industrial B!dg., Shihua Rd., FuTian Free Trade Zone, Shenzhen, China Bell 且已l( )-(认 Betl Hu Title of Witness: SAR Engineer Email Address: [email protected] P hon e No.: +8675533320018 • P3gC I of I

Shenzhen Morlab Communications Technology Co., Ltd. Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 External Photos Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: [email protected] Page 2 of 4 External Photos 1. EUT front view 2. EUT rear view 3. EUT left side view Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: [email protected] Page 3 of 4 4. EUT right side view 5. EUT top view 6. EUT bottom view Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: [email protected] Page 4 of 4 7. EUT and Accessory ** END OF REPORT **

FCC label and label location 1. Label Restricted to occupational use to satisfy RF Exposure limits. See User Manual for operating instructions. 2. Label location

Shenzhen Morlab Communications Technology Co., Ltd. Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Internal Photos Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: [email protected] Page 2 of 6 Internal Photos 1. EUT uncover view Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: [email protected] Page 3 of 6 2. Mainboard front view with shielding Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: [email protected] Page 4 of 6 3. Mainboard rear view with shielding 4. Mainboard view without shielding Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: [email protected] Page 5 of 6 5. Mainboard front view without shielding Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: [email protected] Page 6 of 6 6. Antenna view ** END OF REPORT **

Shenzhen Morlab Communications Technology Co., Ltd. Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Internal Photos Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: [email protected] Page 2 of 6 Internal Photos 1. EUT uncover view Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: [email protected] Page 3 of 6 2. Mainboard Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: [email protected] Page 4 of 6 Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: [email protected] Page 5 of 6 Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: [email protected] Page 6 of 6 3. Antenna view ** END OF REPORT **

Ref : ACR.261.2.13.SATU.A SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY CO., LTD FL3, BUILDING A, FEIYANG SCIENCE PARK, NO.8 LONGCHANG ROAD, BLOCK 67, BAOAN DISTRICT, SHENZHEN, GUANGDONG PROVINCE, P.R. CHINA SATIMO COMOSAR REFERENCE DIPOLE FREQUENCY: 450 MHZ SERIAL NO.: SN 36/08 DIPB98 Calibrated at SATIMO US 2105 Barrett Park Dr. - Kennesaw, GA 30144 09/25/2013 Summary: This document presents the method and results from an accredited SAR reference dipole calibration performed in SATIMO USA using the COMOSAR test bench. All calibration results are traceable to national metrology institutions. SAR Reference Dipole Calibration Report SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.261.2.13.SATU.A Page: 2/10 This document shall not be reproduced, except in full or in part, without the written approval of SATIMO. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of SATIMO. Name Function Date Signature Prepared by : Jérôme LUC Product Manager 9/18/2013 Checked by : Jérôme LUC Product Manager 9/18/2013 Approved by : Kim RUTKOWSKI Quality Manager 9/18/2013 Customer Name Distribution : Shenzhen Morlab Communications Technology Co., Ltd Issue Date Modifications A 9/18/2013 Initial release SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.261.2.13.SATU.A Page: 3/10 This document shall not be reproduced, except in full or in part, without the written approval of SATIMO. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of SATIMO. TABLE OF CONTENTS 1 Introduction ................................................................................................................ 4 2 Device Under Test ..................................................................................................... 4 3 Product Description ................................................................................................... 4 3.1 General Information _______________________________________________________ 4 4 Measurement Method ................................................................................................ 5 4.1 Return Loss Requirements __________________________________________________ 5 4.2 Mechanical Requirements ___________________________________________________ 5 5 Measurement Uncertainty .......................................................................................... 5 5.1 Return Loss ______________________________________________________________ 5 5.2 Dimension Measurement ___________________________________________________ 5 5.3 Validation Measurement ____________________________________________________ 5 6 Calibration Measurement Results .............................................................................. 6 6.1 Return Loss ______________________________________________________________ 6 6.2 Mechanical Dimensions ____________________________________________________ 6 7 Validation measurement ............................................................................................ 7 7.1 Measurement Condition ____________________________________________________ 7 7.2 Head Liquid Measurement __________________________________________________ 7 7.3 Measurement Result _______________________________________________________ 8 7.4 Body Measurement Result __________________________________________________ 9 8 List of Equipment .................................................................................................... 10 SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.261.2.13.SATU.A Page: 4/10 This document shall not be reproduced, except in full or in part, without the written approval of SATIMO. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of SATIMO. 1 INTRODUCTION This document contains a summary of the requirements set forth by the IEEE 1528, OET 65 Bulletin C and CEI/IEC 62209 standards for reference dipoles used for SAR measurement system validations and the measurements that were performed to verify that the product complies with the fore mentioned standards. 2 DEVICE UNDER TEST Device Under Test Device Type COMOSAR 450 MHz REFERENCE DIPOLE Manufacturer Satimo Model SID450 Serial Number SN 36/08 DIPB98 Product Condition (new / used) Used A yearly calibration interval is recommended. 3 PRODUCT DESCRIPTION 3.1 GENERAL INFORMATION Satimo’s COMOSAR Validation Dipoles are built in accordance to the IEEE 1528, OET 65 Bulletin C and CEI/IEC 62209 standards. The product is designed for use with the COMOSAR test bench only. Figure 1 – Satimo COMOSAR Validation Dipole SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.261.2.13.SATU.A Page: 5/10 This document shall not be reproduced, except in full or in part, without the written approval of SATIMO. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of SATIMO. 4 MEASUREMENT METHOD The IEEE 1528, OET 65 Bulletin C and CEI/IEC 62209 standards provide requirements for reference dipoles used for system validation measurements. The following measurements were performed to verify that the product complies with the fore mentioned standards. 4.1 RETURN LOSS REQUIREMENTS The dipole used for SAR system validation measurements and checks must have a return loss of -20 dB or better. The return loss measurement shall be performed against a liquid filled flat phantom, with the phantom constucted as outlined in the fore mentioned standards. 4.2 MECHANICAL REQUIREMENTS The IEEE Std. 1528 and CEI/IEC 62209 standards specify the mechanical components and dimensions of the validation dipoles, with the dimensions frequency and phantom shell thickness dependent. The COMOSAR test bench employs a…

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. SAR EVALUATION REPORT For Qixiang Electron Science & Technology Co., Ltd. Qixiang Building,Tangxi Industrial Zone,Luojiang District,Quanzhou,Fujian,China FCC ID: T4K3208UV Report Type: Original report Product Type: Two way radio Test Engineer: Wilson Chen Report Number: RSZ140723004-20M1 Report Date: 2014-08-13 Reviewed By: Bell Hu SAR En gineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No: RSZ140723004-20M1 SAR Evaluation Report 2 of 61 Attestation of Test Results EUT Information Company Name Qixiang Electron Science & Technology Co., Ltd. EUT Description Two way radio FCC ID T4K3208UV Model Number 518UV, 3208UV, 298UV, 938UV, 318UV, 518UVII, 3208UVII Test Date 2014-07-26 Modulation Frequency (MHz) Max. SAR Level(s) Reported (1g) Limit (W/Kg) Analog 136-174 12.5kHz Face up: 0.115 W/kg (50% duty cycle) Body-Back: 0.378 W/kg (50% duty cycle) 8.0 Applicable Standards ANSI / IEEE C95.1: 2005 IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fileds,3 kHz to 300 GHz. ANSI / IEEE C95.3: 2002 IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to SuchFields,100 kHz—300 GHz. IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques KDB procedures KDB 447498 D01 v05r02: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. KDB 865664 D01v01r03: SAR measurement 100 MHz to 6 GHz v01. KDB 643646D01 v01r01: SAR test Reduction Considerations for Occupational PTT Radios. KDB Inquir y: Tracking Number 316436 for SAR VHF system validation. Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate SAR for Occupational /Controlled Exposure Environment limits specified in ANSI/IEEE Standards and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp. (Shenzhen) Report No: RSZ140723004-20M1 SAR Evaluation Report 3 of 61 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 5 EUT DESCRIPTION .................................................................................................................................................... 6 TECHNICAL SPECIFICATION ......................................................................................................................................... 6 REFERENCE, STANDARDS, AND GUILDELINES ............................................................................................... 7 SAR LIMITS ................................................................................................................................................................. 8 FACILITIES .................................................................................................................................................................. 9 DESCRIPTION OF TEST SYSTEM ........................................................................................................................ 10 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 17 EQUIPMENTS LIST & CALIBRATION INFORMATION .................................................................................................... 17 SAR MEASUREMENT SYSTEM VERIFICATION .............................................................................................. 18 LIQUID VERIFICATION ............................................................................................................................................... 18 SYSTEM ACCURACY VERIFICATION ........................................................................................................................... 20 SAR SYSTEM VALIDATION DATA ..................................................................................................................... 21 EUT TEST STRATEGY AND METHODOLOGY ................................................................................................. 25 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR........................................................................ 25 CHEEK/TOUCH POSITION ........................................................................................................................................... 26 EAR/TILT POSITION ................................................................................................................................................... 26 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS .............................................................................. 27 SAR EVALUATION PROCEDURE ................................................................................................................................. 28 TEST METHODOLOGY ................................................................................................................................................. 28 CONDUCTED OUTPUT POWER MEASUREMENT ........................................................................................... 29 PROVISION APPLICABLE ..........…

Text truncated - open the document above for the full version.

Report No.: SZ14060192S01 Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: [email protected] Page 2 of 39 DIRECTORY 1. TESTING LABORATORY .................................................................................................................... 4 1.1 IDENTIFICATION OF THE RESPONSIBLE TESTING LOCATION ................................................................... 4 1.2 ACCREDITATION CERTIFICATE .............................................................................................................. 4 1.3 LIST OF TEST EQUIPMENTS .................................................................................................................. 4 2. TECHNICAL INFORMATION .............................................................................................................. 5 2.1 IDENTIFICATION OF APPLICANT ............................................................................................................. 5 2.2 IDENTIFICATION OF MANUFACTURER ..................................................................................................... 5 2.3 EQUIPMENT UNDER TEST (EUT) .......................................................................................................... 5 2.3.1 PHOTOGRAPHS OF THE EUT ............................................................................................................. 5 2.3.2 IDENTIFICATION OF ALL USED EUT ..................................................................................................... 6 2.4 APPLIED REFERENCE DOCUMENTS ...................................................................................................... 6 2.5 DEVICE CATEGORY AND SAR LIMITS .................................................................................................... 6 2.6 TEST ENVIRONMENT/CONDITIONS ........................................................................................................ 7 3. SPECIFIC ABSORPTION RATE (SAR) .............................................................................................. 8 3.1 INTRODUCTION .................................................................................................................................... 8 3.2 SAR DEFINITION .................................................................................................................................. 8 4. SAR MEASUREMENT SETUP ........................................................................................................... 9 4.1 THE MEASUREMENT SYSTEM ............................................................................................................... 9 4.2 PROBE ................................................................................................................................................ 9 4.3 PROBE CALIBRATION PROCESS ......................................................................................................... 11 4.3.1 DOSIMETRIC ASSESSMENT PROCEDURE .......................................................................................... 11 4.3.2 FREE SPACE ASSESSMENT PROCEDURE .......................................................................................... 11 4.3.3 TEMPERATURE ASSESSMENT PROCEDURE ....................................................................................... 11 4.4 PHANTOM .......................................................................................................................................... 12 4.5 DEVICE HOLDER ................................................................................................................................ 12 5. TISSUE SIMULATING LIQUIDS ........................................................................................................ 13 6. UNCERTAINTY ASSESSMENT ........................................................................................................ 15 Report No.: SZ14060192S01 Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: [email protected] Page 3 of 39 6.1 UNCERTAINTY EVALUATION FOR EUT SAR TEST ..................................................................... 15 6.2 UNCERTAINTY FOR SYSTEM PERFORMANCE CHECK .............................................…

Text truncated - open the document above for the full version.