T54AJLSB0012414.0-2468.0MHz WIRELESS DEVICE

APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001 Operating manual for 2.4G wireless camera Characters: Wireless transmitting picture & sound, small size, light weight, low power consumption, high sensibility, easy operation and installation. Operation manual: 1. Connect the antenna with the receiver; 2. Plug power jack of DC 9V power supply into the power socket of the receiver(the power indicator is on); 3. Connect the output of receiver with monitor with AV wire; 4. Plug power jack of DC 9V power supply into the power socket of the camera; 5. Dial receiver’ s channel to corresponding channel of wireless camera.(The side of the wireless camera have a adjustable switch: CH1=2414MHz, CH2=2441MHz, CH3=2468MHz) 6. Adjust the lens of the camera to best position. Function: Suitable for monitoring children, old people and house, companies, shops and factories, etc. Notice: The product is prohibited from illegal activities. Our company shall not be responsible for any consequences of illegal conducts by the users. APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001 FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

SB0001TBD.sch-1 - Mon Apr 17 12:05:18 2006

APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001

APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001 Label Drawing FCC ID: T54AJLSB001 Model Number: SB001 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001 Label Location

APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001 APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001 APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001

APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001 Circuit Description of transmitter The transmitter is made up of two parts: Audio & Video unit and RF unit. The audio signal from MIC1 is amplified, then modulates the audio carry frequency oscillator (5.5MHz), the modulated carry frequency is a added in the VT of voltage controlled oscillator VCO2 (2.4GHz, N1, Q9 ). The video signal from CMOS camera passes through the sharp network (C42, R45, R46, C43, R48), also is added in the VT of VCO2 another signal is a added in the VC02 is the error. Voltage output of loop filter , of PLL(U4) which is programmed by MCU (U5) the channel data is decided by the encodes switch of MCU’s peripheries. The feed back signal (R35 C31) form Voltage controlled oscillator. VCO2 is compared with reference crystal oscillator the error frequency of oscillator VCO2 can be corrected. The carry frequency to be modulated by audio & video has been power amplified by Q10 filtered through the band pass filter (C32, R36, C33 )which the higher harmonica of signal reduced to lower level. The purer signal is emitted by antenna (RFOUT)

SHENZHEN MOST ELECTRONICS CO., LTD. Tel:(86) 755-26825180 Fax:(86) 755-86170310 Http:// www. szmost.com Email: [email protected] APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001 Cover Sheet Test Report Product Name: CCTV Camera FCC ID: T54AJLSB001 MODEL NO. : SB0001A Applicant: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. 2F, 12st, LONGBI INDUSTRIAL PARK, BANTIAN VILLAGE, BUJI TOWN, SHENZHEN, CHINA Date Received: 4/13/2006 Date Tested: 4/13/2006 SHENZHEN MOST ELECTRONICS CO., LTD. Tel:(86) 755-26825180 Fax:(86) 755-86170310 Http:// www. szmost.com Email: [email protected] APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001 TABLE OF CONTENTS TABLE OF CONTENTS APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001 TEST REPORT CONTAINING: PAGE 1...........TEST EQUIPMENT LIST PAGE 2...........TEST PROCEDURE PAGE 3-5.........POWER LINE CONDUCTED INTERFERENC AND PLOTS PAGE 6-7.........RADIATION INTERFERENCE TEST DATA PAGE 8-10........OCCUPIED BANDWIDTH AND PLOTS EXHIBIT INCLUDED: PAGE 1...........BLOCK DIAGRAM PAGE 2...........SCHEMATIC PAGE 3...........USERS MANUAL PAGE 4...........LABEL SAMPLE PAGE 5...........LABEL LOCATION PAGE 6...........EXTERNAL PHOTOGRAPHS PAGE 7...........INTERNAL PHOTOGRAPHS PAGE 8...........OPERATIONAL DESCRIPTION PAGE 9...........TEST SET UP PHOTOGRAPHS SHENZHEN MOST ELECTRONICS CO., LTD. Tel:(86) 755-26825180 Fax:(86) 755-86170310 Http:// www. szmost.com Email: [email protected] APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001 Page 1 of 10 EMC Equipment List Equipment Manufacturer Model No.Serial No.Last Cal. Cal. Interval EMI Test Receiver ROHDE&SCHWARZ ESCS30 100307 Mar 20,2006 1 Year LISN ROHDE&SCHWARZ ESH3-Z5 100305 Mar 20,2006 1Year Pulse Limiter ROHDE&SCHWARZ ESH3-Z2 100305 Mar 20,2006 1Year 50Ω Coaxial Switch ANRITSU CORP MP59B 6200283933 Mar 20,2006 1 Year Spectrum Analyzer ANRITSU MS2651B 6200238856 Mar 20,2006 1 Year Bilog Antenna SCHWARZBECK VULB 9163 9163-194 Mar 20,2006 1 Year 50Ω Coaxial Switch ANRITSU CORP MP59B 620028393 3 Mar 20,2006 1 Year Cable Resenberger N/A NO.1 Mar 20,2006 1 Year Cable SCHWARZBECK N/A NO.2 Mar 20,2006 1 Year Cable SCHWARZBECK N/A NO.3 Mar 20,2006 1 Year DC Power Filter DuoJi DL2°30B N/A N/A N/A Single Phase Power Line Filter DuoJi FNF 202B30 N/A N/A N/A 3 Phase Power Line Filter DuoJi FNF 402B30 N/A N/A N/A AC Power Source California Instruments 5001iX-400 55689 Mar 20,2006 1Year Test analyzer California Instruments PACS-1 72254 Mar 20,2006 1Year ESD Tester HAEFELY PESD 1610 H4001552 Mar 20,2006 1 Year Signal Generator IFR 2032 203002/100 Mar 20,2006 1 Year Amplifier A&R 150W1000 301584 NCR NCR Dual Directional Coupler A&R DC6080 301508 Mar 20,2006 1 Year Power Head A&R PH2000 301193 Mar 20,2006 1 Year Power Meter A&R PM2002 302799 Mar 20,2006 1 Year Field Monitor A&R FM5004 300329 Mar 20,2006 1 Year Field Probe A&R FP5000 300221 Mar 20,2006 1 Year EMCPRO System Thermo RO-BASE 0403271 Mar 20,2006 1 Year Capacitive Clamp Thermo PRO-CCL 0403272 Mar 20,2006 1 Year EMCPRO System Thermo PRO-BASE 0403271 Mar 20,2006 1 Year Coupler decoupler for telecom lines Thermo CM-TEL-CD 0403273 Mar 20,2006 1 Year Signal Generator IFR 2032 203002/100 Mar 20,2006 1 Year Amplifier A&R 150W1000 301584 NCR NCR EMCPRO System Thermo PRO-BASE 0403271 Mar 20,2006 1 Year SHENZHEN MOST ELECTRONICS CO., LTD. Tel:(86) 755-26825180 Fax:(86) 755-86170310 Http:// www. szmost.com Email: [email protected] APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001 Page 2 of 10 TEST PROCEDURE GENERAL: This report shall NOT be reproduced except in full without the written approval of SHENZHEN MOST ELECTRONICS CO., LTD. The EUT was transmitting a test signal during the testing. POWER LINE CONDUCTED INTERFERENCE: The test procedure used was ANSI Standard C63.4-2003 using a 50ｕH LISN. Both Lines were observed. The bandwidth of the receiver was 10kHz with an appropriate sweep speed. The ambient temperature of the EUT was 25 °C with a humidity of 58%. RADIATION INTERFERENCE: The test procedure used was ANSI Standard C63.4-2003 using a ANRITSU spectrum analyzer with a pre-selector. The analyzer was calibrated in dB above a micro volt at the output of the antenna. The resolution bandwidth was 100 kHz and the video bandwidth was 300 kHz up to 1 GHz and 1 MHz with a video BW of 3 MHz above 1 GHz. The ambient temperature of the EUT was 25 °Cwith a humidity of 58%. FORMULA OF CONVERSION FACTORS: The Field Strength at 3m was established by adding the meter reading of the spectrum analyzer (which is set to read in units of dBuV) to the antenna correction factor supplied by the antenna manufacturer. The antenna correction factors are stated in terms of dB. The gain of the Pre-selector was accounted for in the Spectrum Analyzer Meter Reading. Example: Freq (MHz) METER READING + ACF = FS 33 20 dBuV + 10.36 dB = 30.36 dBuV/m @ 3m ANSI STANDARD C63.4-2003 10.1.7 MEASUREMENT PROCEDURES: The EUT was placed on a table 80 cm high and with dimensions of 1m by 1.5m. The EUT was placed in the center of the table (1.5m side). The table used for radiated measurements is capable of continuous rotation. When an emission was found, the table was rotated to produce the maximum signal strength. At this point, the antenna was raised and lowered from 1m to 4m. The antenna was placed in both the horizontal and vertical planes. The situation was similar for the conducted measurement except that the table did not rotate. The EUT was setup as described in ANSI Standard C63.4-2003 10.1.7 with the EUT 40 cm from the vertical ground wall. SHENZHEN MOST ELECTRONICS CO., LTD. Tel:(86) 755-26825180 Fax:(86) 755-86170310 Http:// www. szmost.com Email: [email protected] APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001 Page 3 of 10 APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001 NAME OF TEST: POWER LINE CONDUCTED INTERFERENCE RULES PART NUMBER: 15.107 MINIMUM REQUIREMENTS: FREQUEN…

Text truncated - open the document above for the full version.

APPLICANT: ANJIELUN ELECTRONIC TECHNOLOGY LIMITED. FCC ID: T54AJLSB001 Radiated Emission Test