TBUHFG2RFID Reader

RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Content 1/12 User Manual RFID Snap On Module RFID LF Reader RFID HF Reader RFID UHF (EU) Reader RFID UHF (US) Reader Document no. B1-A2Z0-7M0003 Revision 1 / June, 20 th 2013 Reservation: Technical data subject to change without notice. Changes, errors and misprints may not be used as a basis for any claim for damages. Contents Page English 1 - 12 Appendix Declaration of Conformity Certificate of Compliance RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Content 2/12 1. Basic Safety Instructions 3 1.1 Notes on this manual ..................................................................................................... 3 2. Warnings for Use of Wireless Devices 4 2.1 Radio Frequency Interference Requirements - FCC ..................................................... 4 2.2 Radio Frequency Interference Requirements - Canada ................................................ 5 3. Product Description 6 3.1 Operation ....................................................................................................................... 6 3.1.1 Exclusive Purpose ........................................................................................... 6 3.1.2 Site of Operation.............................................................................................. 7 4. Technical Data 8 4.1 Certification.................................................................................................................... 8 4.2 Characteristics ............................................................................................................... 8 4.2.1 Physically Characteristic .................................................................................. 8 4.2.2 User Environment ............................................................................................ 9 4.2.3 Supported RFID Standards ............................................................................. 9 4.3 External Interface ........................................................................................................ 10 4.4 Product Marking .......................................................................................................... 10 5. Commissioning and Operation 11 5.1 Requirements inside of hazardous location ................................................................. 11 5.2 Composition................................................................................................................. 12 6. Order Number 12 6.1 RFID Snap On module for hazardous location ............................................................ 12 6.2 RFID Snap On Module for industrial environment ....................................................... 12 RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Product description 3/12 1. Basic Safety Instructions 1.1 Notes on this manual Please read carefully before commissioning the devices.. The user manual is a constituent part of the product. It must be kept in the direct vicinity of the device and accessible at all times to installation, operating and maintenance personnel. It contains important notes, safety instructions and test certificates which are necessary for perfect functioning when the devices are being operated and handled. The user manual is written for all people who carry out assembly, installation, commissioning and maintenance work on the product, whereby the directives and standards applicable to areas with a gas or dust atmosphere (99/92/EC, EN 60079-17, EN 60079-19, IEC 60079-17, IEC 60079-19) must be observed when doing such work. Familiarity with and strict adherence to the safety instructions and warnings in this manual are essential for safe installation and commissioning. Careful handling and consistent observation of these instructions can prevent accidents, personal injuries and damage to property. The illustrations in these operating instructions serve to make the information and descriptions more clear. They are not necessarily true to scale and may deviate slightly from the actual construction of the device. Safety instructions and warnings are specially highlighted in this manual and marked by symbols. DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNUNG WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. ATTENTION ATTENTION identifies a potentially damaging situation which, if not avoided, could damage the equipment or something in its environment. Important instructions and information on effective, economical and environmentally compatible handling. RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Product description 5/12 2.2 Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Radio Transmitters This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Marking: The Term "IC:" before the radio certification only signifies that "Industry Canada" technical specifications were met. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RFID Snap On Modul Typ…

Text truncated - open the document above for the full version.

RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Content 1/12 User Manual RFID Snap On Module RFID LF Reader RFID HF Reader RFID UHF (EU) Reader RFID UHF (US) Reader Document no. B1-A2Z0-7M0003 Revision 1 / June, 20 th 2013 Reservation: Technical data subject to change without notice. Changes, errors and misprints may not be used as a basis for any claim for damages. Contents Page English 1 - 12 Appendix Declaration of Conformity Certificate of Compliance RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Content 2/12 1. Basic Safety Instructions 3 1.1 Notes on this manual ..................................................................................................... 3 2. Warnings for Use of Wireless Devices 4 2.1 Radio Frequency Interference Requirements - FCC ..................................................... 4 2.2 Radio Frequency Interference Requirements - Canada ................................................ 5 3. Product Description 6 3.1 Operation ....................................................................................................................... 6 3.1.1 Exclusive Purpose ........................................................................................... 6 3.1.2 Site of Operation.............................................................................................. 7 4. Technical Data 8 4.1 Certification.................................................................................................................... 8 4.2 Characteristics ............................................................................................................... 8 4.2.1 Physically Characteristic .................................................................................. 8 4.2.2 User Environment ............................................................................................ 9 4.2.3 Supported RFID Standards ............................................................................. 9 4.3 External Interface ........................................................................................................ 10 4.4 Product Marking .......................................................................................................... 10 5. Commissioning and Operation 11 5.1 Requirements inside of hazardous location ................................................................. 11 5.2 Composition................................................................................................................. 12 6. Order Number 12 6.1 RFID Snap On module for hazardous location ............................................................ 12 6.2 RFID Snap On Module for industrial environment ....................................................... 12 RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Product description 3/12 1. Basic Safety Instructions 1.1 Notes on this manual Please read carefully before commissioning the devices.. The user manual is a constituent part of the product. It must be kept in the direct vicinity of the device and accessible at all times to installation, operating and maintenance personnel. It contains important notes, safety instructions and test certificates which are necessary for perfect functioning when the devices are being operated and handled. The user manual is written for all people who carry out assembly, installation, commissioning and maintenance work on the product, whereby the directives and standards applicable to areas with a gas or dust atmosphere (99/92/EC, EN 60079-17, EN 60079-19, IEC 60079-17, IEC 60079-19) must be observed when doing such work. Familiarity with and strict adherence to the safety instructions and warnings in this manual are essential for safe installation and commissioning. Careful handling and consistent observation of these instructions can prevent accidents, personal injuries and damage to property. The illustrations in these operating instructions serve to make the information and descriptions more clear. They are not necessarily true to scale and may deviate slightly from the actual construction of the device. Safety instructions and warnings are specially highlighted in this manual and marked by symbols. DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNUNG WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. ATTENTION ATTENTION identifies a potentially damaging situation which, if not avoided, could damage the equipment or something in its environment. Important instructions and information on effective, economical and environmentally compatible handling. RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Product description 5/12 2.2 Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Radio Transmitters This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Marking: The Term "IC:" before the radio certification only signifies that "Industry Canada" technical specifications were met. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RFID Snap On Modul Typ…

Text truncated - open the document above for the full version.

RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Content 1/12 User Manual RFID Snap On Module RFID LF Reader RFID HF Reader RFID UHF (EU) Reader RFID UHF (US) Reader Document no. B1-A2Z0-7M0003 Revision 1 / June, 20 th 2013 Reservation: Technical data subject to change without notice. Changes, errors and misprints may not be used as a basis for any claim for damages. Contents Page English 1 - 12 Appendix Declaration of Conformity Certificate of Compliance RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Content 2/12 1. Basic Safety Instructions 3 1.1 Notes on this manual ..................................................................................................... 3 2. Warnings for Use of Wireless Devices 4 2.1 Radio Frequency Interference Requirements - FCC ..................................................... 4 2.2 Radio Frequency Interference Requirements - Canada ................................................ 5 3. Product Description 6 3.1 Operation ....................................................................................................................... 6 3.1.1 Exclusive Purpose ........................................................................................... 6 3.1.2 Site of Operation.............................................................................................. 7 4. Technical Data 8 4.1 Certification.................................................................................................................... 8 4.2 Characteristics ............................................................................................................... 8 4.2.1 Physically Characteristic .................................................................................. 8 4.2.2 User Environment ............................................................................................ 9 4.2.3 Supported RFID Standards ............................................................................. 9 4.3 External Interface ........................................................................................................ 10 4.4 Product Marking .......................................................................................................... 10 5. Commissioning and Operation 11 5.1 Requirements inside of hazardous location ................................................................. 11 5.2 Composition................................................................................................................. 12 6. Order Number 12 6.1 RFID Snap On module for hazardous location ............................................................ 12 6.2 RFID Snap On Module for industrial environment ....................................................... 12 RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Product description 3/12 1. Basic Safety Instructions 1.1 Notes on this manual Please read carefully before commissioning the devices.. The user manual is a constituent part of the product. It must be kept in the direct vicinity of the device and accessible at all times to installation, operating and maintenance personnel. It contains important notes, safety instructions and test certificates which are necessary for perfect functioning when the devices are being operated and handled. The user manual is written for all people who carry out assembly, installation, commissioning and maintenance work on the product, whereby the directives and standards applicable to areas with a gas or dust atmosphere (99/92/EC, EN 60079-17, EN 60079-19, IEC 60079-17, IEC 60079-19) must be observed when doing such work. Familiarity with and strict adherence to the safety instructions and warnings in this manual are essential for safe installation and commissioning. Careful handling and consistent observation of these instructions can prevent accidents, personal injuries and damage to property. The illustrations in these operating instructions serve to make the information and descriptions more clear. They are not necessarily true to scale and may deviate slightly from the actual construction of the device. Safety instructions and warnings are specially highlighted in this manual and marked by symbols. DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNUNG WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. ATTENTION ATTENTION identifies a potentially damaging situation which, if not avoided, could damage the equipment or something in its environment. Important instructions and information on effective, economical and environmentally compatible handling. RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Product description 5/12 2.2 Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Radio Transmitters This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Marking: The Term "IC:" before the radio certification only signifies that "Industry Canada" technical specifications were met. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RFID Snap On Modul Typ…

Text truncated - open the document above for the full version.

RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Content 1/12 User Manual RFID Snap On Module RFID LF Reader RFID HF Reader RFID UHF (EU) Reader RFID UHF (US) Reader Document no. B1-A2Z0-7M0003 Revision 1 / June, 20 th 2013 Reservation: Technical data subject to change without notice. Changes, errors and misprints may not be used as a basis for any claim for damages. Contents Page English 1 - 12 Appendix Declaration of Conformity Certificate of Compliance RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Content 2/12 1. Basic Safety Instructions 3 1.1 Notes on this manual ..................................................................................................... 3 2. Warnings for Use of Wireless Devices 4 2.1 Radio Frequency Interference Requirements - FCC ..................................................... 4 2.2 Radio Frequency Interference Requirements - Canada ................................................ 5 3. Product Description 6 3.1 Operation ....................................................................................................................... 6 3.1.1 Exclusive Purpose ........................................................................................... 6 3.1.2 Site of Operation.............................................................................................. 7 4. Technical Data 8 4.1 Certification.................................................................................................................... 8 4.2 Characteristics ............................................................................................................... 8 4.2.1 Physically Characteristic .................................................................................. 8 4.2.2 User Environment ............................................................................................ 9 4.2.3 Supported RFID Standards ............................................................................. 9 4.3 External Interface ........................................................................................................ 10 4.4 Product Marking .......................................................................................................... 10 5. Commissioning and Operation 11 5.1 Requirements inside of hazardous location ................................................................. 11 5.2 Composition................................................................................................................. 12 6. Order Number 12 6.1 RFID Snap On module for hazardous location ............................................................ 12 6.2 RFID Snap On Module for industrial environment ....................................................... 12 RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Product description 3/12 1. Basic Safety Instructions 1.1 Notes on this manual Please read carefully before commissioning the devices.. The user manual is a constituent part of the product. It must be kept in the direct vicinity of the device and accessible at all times to installation, operating and maintenance personnel. It contains important notes, safety instructions and test certificates which are necessary for perfect functioning when the devices are being operated and handled. The user manual is written for all people who carry out assembly, installation, commissioning and maintenance work on the product, whereby the directives and standards applicable to areas with a gas or dust atmosphere (99/92/EC, EN 60079-17, EN 60079-19, IEC 60079-17, IEC 60079-19) must be observed when doing such work. Familiarity with and strict adherence to the safety instructions and warnings in this manual are essential for safe installation and commissioning. Careful handling and consistent observation of these instructions can prevent accidents, personal injuries and damage to property. The illustrations in these operating instructions serve to make the information and descriptions more clear. They are not necessarily true to scale and may deviate slightly from the actual construction of the device. Safety instructions and warnings are specially highlighted in this manual and marked by symbols. DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNUNG WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. ATTENTION ATTENTION identifies a potentially damaging situation which, if not avoided, could damage the equipment or something in its environment. Important instructions and information on effective, economical and environmentally compatible handling. RFID Snap On Modul Type B7-A2Z0-0020 to 0023 and G7-A0Z0-0001 to 0004 Product description 5/12 2.2 Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Radio Transmitters This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Marking: The Term "IC:" before the radio certification only signifies that "Industry Canada" technical specifications were met. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RFID Snap On Modul Typ…

Text truncated - open the document above for the full version.

TÜV SÜD Product Service GmbH • Äußere Frühlingstr. 45 • 94315 Straubing • Deutschland Trade Register Munich HRB 85742 HypoVereinsbank Munich Acc. No. 48 852 211 Bank Code 700 202 70 VAT ID No. DE129484267 Information pursuant to Section 2(1) DL-InfoV (Germany) at www.tuev-sued.com/imprint Management: Dr. Jens Butenandt Robert Kees Tel: 09421-5522-0 Fax: 09421-5522-99 www.tuev-sued.de TÜV SÜD Product Service GmbH Straubing Branch Äußere Frühlingstraße 45 94315 Straubing Germany PHOENIX TESTLAB GmbH Product Certification Königswinkel 10 D-32825 Blomberg Long/Short term Confidentiality Request 2013-06-05 FCC ID: TBUHFG2 To whom it may concern, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby request long- term confidential treatment of information accompanying this application as outlined below: Schematics Parts List Block Diagram Tune-Up Info Operational Description In addition we hereby request the following exhibits contained in this application to be tempo- rarily (short-term confidentilality) withheld from the public disclosure for an initial period of days until: not applicable External Photos Test Setup Photos Internal Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and pro- vide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this applica- tion. Thank you for your attention in this matter. TÜV SÜD Product Service GmbH Johann Roidt Laboratory Manager

TÜV SÜD Product Service GmbH • Äußere Frühlingstr. 45 • 94315 Straubing • Deutschland Trade Register Munich HRB 85742 HypoVereinsbank Munich Acc. No. 48 852 211 Bank Code 700 202 70 VAT ID No. DE129484267 Information pursuant to Section 2(1) DL-InfoV (Germany) at www.tuev-sued.com/imprint Management: Dr. Jens Butenandt Robert Kees Tel: 09421-5522-0 Fax: 09421-5522-99 www.tuev-sued.de TÜV SÜD Product Service GmbH Straubing Branch Äußere Frühlingstraße 45 94315 Straubing Germany PHOENIX TESTLAB GmbH Product Certification Königswinkel 10 D-32825 Blomberg Long/Short term Confidentiality Request 2013-06-05 FCC ID: TBUHFG2 To whom it may concern, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby request long- term confidential treatment of information accompanying this application as outlined below: Schematics Parts List Block Diagram Tune-Up Info Operational Description In addition we hereby request the following exhibits contained in this application to be tempo- rarily (short-term confidentilality) withheld from the public disclosure for an initial period of days until: not applicable External Photos Test Setup Photos Internal Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and pro- vide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this applica- tion. Thank you for your attention in this matter. TÜV SÜD Product Service GmbH Johann Roidt Laboratory Manager

FCC ID TBUHFG2 IC: 5736C-HFG2 FCC ID TBUHFG2 IC: 5736C-HFG2 FCC ID TBUHFG2 IC: 5736C-HFG2 FCC ID TBUHFG2 IC: 5736C-HFG2

FCC ID TBUHFG2 IC: 5736C-HFG2 FCC ID TBUHFG2 IC: 5736C-HFG2 FCC ID TBUHFG2 IC: 5736C-HFG2 FCC ID TBUHFG2 IC: 5736C-HFG2

Label versions Label HF

Label versions Label HF

FCC ID TBUHFG2 IC: 5736C-HFG2 FCC ID TBUHFG2 IC: 5736C-HFG2 FCC ID TBUHFG2 IC: 5736C-HFG2 FCC ID TBUHFG2 IC: 5736C-HFG2 FCC ID TBUHFG2 IC: 5736C-HFG2

FCC ID TBUHFG2 IC: 5736C-HFG2 FCC ID TBUHFG2 IC: 5736C-HFG2 FCC ID TBUHFG2 IC: 5736C-HFG2 FCC ID TBUHFG2 IC: 5736C-HFG2 FCC ID TBUHFG2 IC: 5736C-HFG2

Note: The test data of this report is related only to the individual item which has been tested. This report shall not be reproduced except in full extent without the written approval of the testing laboratory. Trade Register Munich HRB 85742 VAT ID No. DE129484267 Information pursuant to Section 2(1) DL-InfoV (Germany) at www.tuev-sued.com/imprint Supervisory Board: Dirk Eilers Management: Robert Kees Dr. Jens Butenandt Phone: +49 9421 55 22-0 Fax: +49 9421 55 22-99 www.tuev-sued.de TÜV SÜD Product Service GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Prüfbericht / Test Report Nr. / No. 50323-22322-4 (Edition 4) Applicant: Bartec GmbH Type of equipment: RFID Reader Type designation: G7-A0Z0-0002 Order No.: 100-6263732 Test standards: FCC Code of Federal Regulations, CFR 47, Part 15, Sections 15.205, 15.207, 15.215 and 15.225 Industry Canada Radio Standards Specifications RSS-GEN Issue 3, Sections 7.2.2, 7.2.4 and 7.2.5 and RSS-210 Issue 8, Section A2.6 (Category I Equipment) June 26, 2013 Page 1 of 51 TÜV SÜD Product Service GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.de Test Report No. 50323-22322-4 (Edition 4) Page 2 of 51 Pages Table of Contents 1 Description of the Equipment Under Test (EUT) ............................................................ 3 2 Administrative Data ........................................................................................................ 4 3 Identification of the Test Laboratory ............................................................................... 5 4 Summary ........................................................................................................................ 6 5 Operation Mode and Co…

Text truncated - open the document above for the full version.