TDA-FPTTWireless PTT

PTT Button Pair Button Pairing Press and hold the PTT button on the wireless PTT module then Press and hold the small black button on the adapter next to the LED for X sec and release both buttons. If the pairing was successful, the radio will start trans If the pairing was successful, the radio will start trans- mitting until the wireless PTT button is released. Press and hold the wireless PTT button while you are talking, release when finished. The wireless PTT will not function unless the adapter is linked up with a Remote device. Battery The battery in the wireless PTT module is a dispos- able "watch style" battery. The battery is a CR2032 lithium type and is available in any Radio Shack, Wal-Mart, etc... Our current estimate on battery life is 3 months. This is based on the button being held down 90 min- utes per day, 5 days per week. The battery can be accessed by prying the wireless PTT housing apart. Remove the PCB from the plas- tic housing and slide the battery out of the holder. The new battery should be installed with the nega- tive side toward the PCB and the positive side toward the holder. When the new battery is in- stalled, replace the PCB into the housing and snap the housing back together. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference received, including interference that may cause undesired operation.

Date: 4/ 6 Subject: FCC ID: Pursuan t FCC app T y Freelinc in indust r advantag design w Perman The appl withheld informati Sincerel y _______ Print Na Title: Ex 6/2011 Confidenti a TDA-FPTT t to FCC 47 plication be h ype of Conf Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term has spent su ry. Having th ge they have will result in fi ent Confide icant reques from public on not cust o y, ___________ ame: Dougla xecutive Vic ality Request CRF 0.457( held confiden identiality R m Pe m m m Pe m Pe m Pe m Pe m m ubstantial ef he subject in e achieved b inancial hard entiality: sts the exhib review due t omarily relea __________ as H Dobyn ce Presiden t for: d) and 0.45 9 ntial. Requested ermanent ermanent ermanent ermanent ermanent ffort in devel nformation ea by developin dship. bits listed ab to materials ased to the p ________ ns nt 9, the applic Exhibit Block Di External Internal P Operatio Operatio Parts Lis Tune-Up Schemat Test Set User’s M oping this p asily availab g this produ ove as per m that contain public. cant requests agrams Photos Photos on Descriptio on st & Placeme p Procedure tics tup Photos Manual roduct and i ble to "comp ct. Not prot e manently con n trade secre April 6, Date s that a part on/Theory of ent/BOM t is one of t h etition" wou ecting the de nfidential be ets and prop 2011 t of the subje f he first of its ld negate th etails of the permanentl prietary ect kind e y

p1130015, d1140015 Rev 1.0 Date: April 22, 2011 Applicant: FreeLinc 255 W Center St Orem, UT 85047 Attention of: Douglas H Dobyns Ph: (801)467-1199 Fax: (801)672-3003 E-mail: [email protected] Equipment: FLWPTT FCC ID: TDA-FPTT FCC Rules: Radio Frequency Radiation Exposure Limits 47 CFR 1.1307 RF Exposure Statement 1. Standard Applicable According to 1.1307 (b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. This is a portable device. 2. Measurement Result This is a portable device and the max peak output power is -13.23 dBm (.047534 W). The peak output power is lower than the low threshold of 60/f GHz = (65.55 mW), for d<2.5 cm general population category. The SAR/MPE measurement is not necessary.

Date: April 21, 2011 Applicant: FreeLinc 266 West Center St Orem, UT 84057 Attention of: Douglas H Dobyns Ph: (801)467-1199 Fax: (801)672-3003 E-mail: [email protected] Mailing: FreeLinc 266 West Center St Orem, UT 84057 Equipment: FLWPTT FCC Rules: 15.249 Attached is a copy of your Test Report per the testing standards requested. This report may not be reproduced, except in full, without written permission from Compliance Testing. Please retain a copy of this report for your archival records. The attached report indicates that the sample submitted for testing complied with relevant requirements of the pertinent standards we tested to. If you are seeking an FCC Grant or other Certification requiring approval from a regulatory authority via a Certification Body (TCB or FCB), you may submit this report along with your application for review. For EU, Production units meeting these standards can now be marketed after completion of the Manufacturer’s Declaration of Conformity (DoC) and application of the CE marking. Our invoice for services has been directed to your Accounts Payable Department, with a copy attached for your reference. Should anything need clarification, do not hesitate to call or FAX. It has been a pleasure to work with you and we do thank you for your order. Sincerely, Compliance Testing, LLC p1130015 – FCC Part 15.249 Rev 1.0 Page: 1 of 10 Test Report For Model: FLWPTT Description: Wireless PTT To Federal Communications Commission Rule Part 15.249 Date of Issue: April 21, 2011 On the behalf of the applicant: FreeLinc 266 West Center St Orem, UT 84057 Attention of: Douglas H Dobyns Ph: (801)467-1199 Fax: (801)672-3003 E-mail: [email protected] Prepared by Compliance Testing, LLC 3356 N San Marcos Pl, Suite 107 Chandler, AZ 85225-7176 (866) 311-3268 phone / (480) 926-3598 fax www.compliancetesting.com Project No: p1130015 Greg Corbin Project Test Engineer p1130015 – FCC Part 15.249 Rev 1.0 Page: 2 of 10 Test Report Revision History Revision Date Revised By Reason for Revision 1.0 April 21, 2011 Greg Corbin Original Document p1130015 – FCC Part 15.249 Rev 1.0 Page: 3 of 10 Table of Contents Description Page Test Results Summary .......................................................................................................................................... 6 Fundamental Field Strength ................................................................................................................................. 7 Radiated Spurious Emissions .............................................................................................................................. 8 Test Equipment Utilized .....................................................................................................................................10 p1130015 – FCC Part 15.249 Rev 1.0 Page: 4 of 10 A2LA Compliance Testing, LLC, has been accredited by A2LA for technical competence in the field of electrical testing. The accreditation covers the specific tests and types of tests listed on our scope of accreditation. This laboratory meets the requirements of ISO 17025:2005. “General Requirements for the Competence of Testing and Calibration Laboratories” and any additional program requirements in the identified field of testing Please refer to www.a2la.org for current scope of accreditation or http://www.compliancetesting.com/labscope.html Certificate Number: 2152.01 FCC OATS Reg, #933597 IC Reg. #2044A-1 p1130015 – FCC Part 15.249 Rev 1.0 Page: 5 of 10 The applicant has been cautioned as to the following: 15.21: Information to User The user’s manual or instruction manual for an intentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.27(a): Special Accessories Equipment marketed to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However, in lieu of shipping or packaging the special accessories with the unintentional or intentional radiator the responsible part may employ other methods of ensuring that the special accessories are provided to the consumer, without additional charge. Information detailing any alternative method used to supply the special accessories for a grant of equipment authorization or retained in the verification records, as appropriate. The party responsible for the equipment, as detailed in § 2.909 of this chapter, shall ensure that these special accessories are provided with the equipment. The instruction manual for such devices shall include appropriate instructions on the first page of text concerned with the installation of the device that these special accessories must be used with the device. It is the responsibility of the user to use the needed special accessories supplied with the equipment. p1130015 – FCC Part 15.249 Rev 1.0 Page: 6 of 10 Test Results Summary Specification Test Name Pass, Fail, N/A Comments 15.249(a) Fundamental Field Strength Pass 15.249(d) Out of Band Spurious Emissions Pass EUT Description The FreeLinc FPTT provides a wireless Push To Talk (PTT) accessory for two way radios. This accessory consists of a receiver module that is installed into the FreeLinc radio adapter and a remote transmitter. EUT Operation during Tests EUT was operated under normal operating conditions. p1130015 – FCC Part 15.249 Rev 1.0 Page: 7 of 10 Fundamental Field Strength Name of Test: Fundamental Field Strength Specification: 15.249(a) Engineer: Greg Corbin Test Equipment Utilized: i00267, i00331 Test Date: 4/20/2011 Test Procedure The EUT was tested on an Open Area Test …

Text truncated - open the document above for the full version.

Page 1 of 2 Test Setup Photos: FreeLinc FCC ID: TDA-FPTT Radiated Emissions above 1 GHz - #1 Radiated Emissions above 1 GHz - #2 Page 2 of 2 Radiated Emissions below 1 GHz - #1 Radiated Emissions below 1 GHz - #2