TE7EAP620HDAX1800 Wireless Dual-Band Gigabit Ceiling Mount Access Point

Authentication Omada EAP For Class A EAP with adapter: FCC Compliance Information Statement Product Name: Omada EAP Model Number: EAP110 / EAP110-Outdoor Component NameModel I.T.E. Power SupplyTL-POE2406 Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: https://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: [email protected] This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter.” Product Name: I.T.E. Power Supply Model Number: TL-POE2406 Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: https://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: [email protected] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date:2020-5-12 CE Mark Warning This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY (the maximum transmitted power) 2412MHz—2472MHz(20dBm) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce. RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire de brouillage; 2) L’appare…

Text truncated - open the document above for the full version.

User Guide For TP-Link Omada Access Points 1910012768 REV4.6.0 June 2020 I CONTENTS About This User Guide........................................................................................................1 Overview .................................................................................................................................3 1 Quick Start .......................................................................................................................4 1.1 Determine the Management Method ..................................................................................................5 1.2 Build the Network Topology ...................................................................................................................6 1.3 Log In to the EAP ........................................................................................................................................7 1.3.1 Log In via a Wireless Connection ................................................................................................7 1.3.2 Log In via a Wired Connection ......................................................................................................9 1.4 Do the Basic Configurations ................................................................................................................11 1.5 Configure and Manage the EAP ..........................................................................................................13 2 Configure the Network ..............................................................................................14 2.1 Configure the Wireless Parameters ..................................................................................................15 2.1.1 Configure SSIDs ..............................................................................................................................16 2.1.2 Configure Wireless Advanced Settings .................................................................................22 Radio Setting ....................................................................................................................................22 Load Balance ....................................................................................................................................24 Airtime Fairness ..............................................................................................................................24 More Settings ..................................................................................................................................25 2.2 Configure Portal Authentication ........................................................................................................26 Configure Portal............................................................................................................................................27 Configure Free Authentication Policy ..................................................................................................33 2.3 Configure VLAN ........................................................................................................................................35 2.4 Configure MAC Filtering ........................................................................................................................36 2.5 Configure Scheduler ...............................................................................................................................38 2.6 Configure Band Steering .......................................................................................................................41 2.7 Configure QoS ...........................................................................................................................................43 II 2.8 Configure Rogue AP Detection ...........................................................................................................47 Detect Rogue APs and Move the Rogue APs to the Trusted AP List .......................................48 Manage the Trusted AP List .....................................................................................................................50 3 Monitor the Network ..................................................................................................52 3.1 Monitor the EAP ........................................................................................................................................53 3.2 Monitor the Wireless Parameters ......................................................................................................54 Monitor the SSIDs ........................................................................................................................................55 Monitor the Radio Settings .......................................................................................................................56 Monitor Radio Traffic ..................................................................................................................................56 Monitor LAN Traffic .....................................................................................................................................57 3.3 Monitor the Clients ..................................................................................................................................58 View Client Information ..............................................................................................................................59 View Block Client Information .................................................................................................................60 4 Manage the EAP ...........................................................................................................61 4.1 Manage the IP Address of the EAP ....................................................................................................62 4.…

Text truncated - open the document above for the full version.

Non-SDR (Software Defined Radio) Cover Letter Date: 2020.11.26 Refer to KDB 442812 D01 SDR apps Guide v02r03. The following six questions can be used for determining if a radio can elect to be, or must be an SDR. 1. Can the RF parameters of the device be altered through software? □Yes - go to 2. No, not an SDR 2. Can third parties not permitted by the Commission through specific filings modify, configure, or load different software, or make configuration settings to operate the device or host hardware radio frequency parameters (frequency range, modulation type, maximum output power or other radio parameters) in any other way than granted (or expected to be granted)? □Yes, must be an SDR. □No - go to 3. 3. Is the device capable of operating in any other way than granted, or will be, granted? □Yes, - go to 4. □No - go to 5. 4. Is this a Part 15 cli ent Devic e as defined in Section 15.202 (as oppose d to a master device )? □Yes, quali fies as a part 15 cli ent devic es - go to 5. □No, must be an SDR. 5. Does the manufact urer elect SDR? □Yes, elects to be an SDR. □No, Not an SDR Final conclusion: According to th e above questions reply, we ca n confir m this AX1800 Wireless Dual-Band G ig abit Ceili ng Mount A ccess Point (FCC ID: T E7EAP620HD) must be a Non-SDR. Name: Huang Ji ng Positio n: Regulatory Compli ance Manager TP-Link Tech nologies Co., Ltd .

TP-Link Techn ologies Co., Ltd. Authority to Act as Agent Date: 2020-11-26 American Certification Body, Inc. 6731 Whi tti er Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: BTL Inc/Rose Liu is aut horized to act on our beha lf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to de ni al of fede ral bene fits, that includes FCC benefits, pursua nt to Section 5301 of the Anti-Drug Abus e Act of 1988, 21 U. S.C. 862. Fur ther, no pa rty, as de fine d in 47 CFR 1. 2002 (b), to the application is subj ect to de nial of federal benefits, that inc ludes FCC benefits. Thank you, Age ncy Agr eement Expiration Date: 2021-11-26 By: __________________________ _______Jing Huang_________________ (Signatur e 1 ) (Print name) Title: Regulato ry Compli ance Mana ge r On behalf of: TP-Link Techn ologies Co., Ltd. (Compa ny Name) Teleph on e: 75521534921 1 - Mus t be signed by applicant contact gi ven for app licant on the FCC site , or by the aut horized age nt if an app ropriate aut horized age nt lette r ha s been provide d. Lette rs shoul d be placed on appropriate lette rh ead.

TP-Link Techn ologies Co. , Ltd. Request f or C onfidentiality Date: 2020-11-26 Subj ect: Confidentialit y R equest f or: TE7EAP620HD Pursuant t o F CC 47 CRF 0.457(d) a nd 0.459 and I C R SP-100, Section 12.4, the a pp lic ant r equest s t hat a p art o f t he su bj ect F CC a pp lic ation be held confidential. Type of C onfidentiality Request ed Exhibit Sho rt Term Permanent Bloc k D iagrams Sho rt Term External P ho tos Sho rt Term Permanent* 1 Int ernal P ho tos Sho rt Term Permanent Operation D esc ription /Theory of O pe ration Sho rt Term Permanent Parts List & P lacement/BOM Sho rt Term Permanent Tune-Up P rocedu re Sho rt Term Permanent Schematic s Sho rt Term Test Setup P ho tos Sho rt Term Permanent* 3 Use r’s Manual TP-Link Techno log ies Co., Ltd. has spe nt s ubstantial e ffor t i n de velop ing t his product a nd it is on e of t he f irst of its kind i n i nd ustry. Having t he s ubj ect i nformation easi ly a va ilabl e t o "compe tit ion " woul d ne gate t he a dv antage t he y have a chieved b y develop ing t his product. Not protecting the de tails of t he de si gn will result i n f inanc ial h ardship. Permanent C onfidentiality: The a pp licant r equests t he e xhibits list ed a bove a s permane ntly con fide ntial be permanently withh eld from pu blic review du e t o materials t hat c on tain t rade secrets an d proprietary i nf ormation not cust omarily r elease d t o t he pu bl ic. Shor t-Term C onfidentiality: The a pp licant r equests t he e xhibits selected a bove a s sho rt t erm c onfidential be withh eld from pu blic view for a period of ___(specify number o f days not to exc eed 180) 2 d ays from the d ate of t he G rant of Equipment Aut ho rization a nd prior t o marketing . This i s t o a vo id premature r elease of s ensiti ve i nf ormation p rior t o marke ting or r elease of t he p roduct t o t he pu bl ic. App licant i s also a ware t hat the y a re r esponsi bl e t o no tify ACB i n the e ve nt inf ormation r egarding t he prod uc t or t he product i s made availabl e t o t he pu blic. ACB will the n r elease t he do cuments l ist ed a bove f or publ ic disc losure pu rsu ant t o F CC Public N otice D A 04-1705. NOTE for Indust ry Canada Applicat ions: IC current ly only dist inguishe s Permane nt Con fide ntiality e xh ibits as sho wn a bove. Sho rt Term c on fide ntialit y i s no t con si de red a pp lic abl e t o IC a pp lications. Sincerely, By: Regu latory C ompl iance Manager Jing Huang (Signature/Title 3 ) (Print n ame) 1 - The asteriske d items (*) require further information to be pr ovide d to ACB before pe rmanent confide ntiality will be ext ende d to these exhibits . Please refer to FCC KDB 72 6920 and the specific Document link for D01 found at: https://apps.fcc.go v/oetcf/kdb/forms/FTSSearchResultPage .cfm?switc h=P&id=41731 and review section II , 3) regarding specific information tha t must accompa ny these requests. 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-S hort-Term-Vs-S tandard-Confide ntiality.pdf for compl ete de tails. 3 - Mus t be signed by applicant contact given for applicant on the FCC site, or by the aut horized age nt if an app ropriate aut horized age nt lette r ha s been provide d. Lette rs shoul d be placed on appropriate lette rh ead.

Project No.: 2006C097A Page 2 of 12 Project No.: 2006C097A Page 3 of 12 Project No.: 2006C097A Page 4 of 12 Project No.: 2006C097A Page 5 of 12

C B A 12 C 345678 B E D D A 9 料号： 12345 E 6789 EAP620 HD(EU) 1.0_产品规格标贴 A1 80g艾利铜版纸+雾膜 EAP620 HD(EU) 1.0 梁敏 2020-04-16 白色 TP底壳灰 白色 白色 注：S/N码由工厂打印至27*5mm空白标贴(7210500214) 空白标贴后黏贴至指定条码框上，MAC码、SSID由工厂直接打印在标贴上。 MAC条码由“XXXXXXXXXXXX”生成， 文本打印为“XX-XX-XX-XX-XX-XX”。 SSID以软件生成工具为准 3mm3mm 3mm 卷装供货： 边距&跳距=3mm 文字方向 文字方向 文字转曲（供应商来料效果）54.5*29.5±0.2mm，3.5R，2C AX1800 Wireless Dual-Band Gigabit Ceiling Mount Access Point This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Model: EAP620 HD Power: 12V 1.0A 802.3at PoE: 42.5-57V 0.6A Default Access: http://tplinkeap.net Username: admin Password: admin S/N:XXXXXXXXXXXXX Model:EAP620 HD(EU) Ver:1.0 MAC:XX-XX-XX-XX-XX-XX SSID: TP-Link_2.4GHz_XXXXXX SSID: TP-Link_5GHz_XXXXXX TP-Link Technologies Co., Ltd. No.5 Keyuan Road, Nanshan, Shenzhen, 518057, PRC FCC ID: TE7EAP620HD IC: 8853A-EAP620HD Label location

Project No.: 2006C097A Page 6 of 12 Project No.: 2006C097A Page 7 of 12 2.4G Ant. 2 2.4G Ant. 1 5G Ant. 2 5G Ant. 1 Project No.: 2006C097A Page 8 of 12 Project No.: 2006C097A Page 9 of 12 Project No.: 2006C097A Page 10 of 12 Project No.: 2006C097A Page 11 of 12 Project No.: 2006C097A Page 12 of 12 2.4G Ant. 2 2.4G Ant. 1 5G Ant. 2 5G Ant. 1

Report No.: BTL-FCCP-3-2006C097A Page 1 of 6 FCC RF EXPOSURE REPORT FCC ID: TE7EAP620HD Project No. : 2006C097A Equipment : AX1800 Wireless Dual-Band Gigabit Ceiling Mount Access Point Brand Name : tp-link Test Model : EAP620 HD Series Model : N/A Applicant : TP-Link Technologies Co., Ltd. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Manufacturer : TP-Link Technologies Co., Ltd. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Date of Receipt : Aug. 17, 2020 Date of Test : Aug. 17, 2020 ~ Nov. 03, 2020 Issued Date : Nov. 24, 2020 Report Version : R00 Test Sample : Engineering Sample No.: DG202008181 Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Peggy Zhu Approved by : Ethan Ma Add: No.3, Jinshagang 1st Road, Shixia, Dalang Town,Dongguan, Guangdong, China. Tel: +86-769-8318-3000 Web: www.newbtl.com Report No.: BTL-FCCP-3-2006C097A Page 2 of 6 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue Nov. 24, 2020 Report No.: BTL-FCCP-3-2006C097A Page 3 of 6 1. TEST FACILITY The test facilities used to collect the test data in this report is at the location of No.3,Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. BTL's Test Firm Registration Number for FCC: 357015 BTL's Designation Number for FCC: CN1240 2. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna: For 2.4GHz: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A Internal N/A 3 2 N/A Internal N/A 3 Note: This EUT supports CDD, and all antennas have the same gain, then, 1) Non Beamforming function, Directional gain = G ANT +Array Gain, For power measurements, Array Gain = 0 dB (N ANT ≤ 4), so the Directional gain=3. For power spectral density measurements, N ANT = 2, N SS = 1. So Directional gain = G ANT + Array Gain = G ANT +10log (N ANT / N SS ) dB =3+10log(2/1)dBi=6.01. Then, the power spectral density limit is 8-(6.01-6)=7.99. 2) Beamforming Gain: 3 dB, So Directional Gain=3+3=6. For Non Beamforming: Operating Mode TX Mode 2TX IEEE 802.11b V (Ant. 1 + Ant. 2) IEEE 802.11g V (Ant. 1 + Ant. 2) IEEE 802.11n(HT20) V (Ant. 1 + Ant. 2) IEEE 802.11n(HT40) V (Ant. 1 + Ant. 2) IEEE 802.11ax(HE20) V (Ant. 1 + Ant. 2) IEEE 802.11nax(HE40) V (Ant. 1 + Ant. 2) Report No.: BTL-FCCP-3-2006C097A Page 4 of 6 For Beamforming: Operating Mode TX Mode 2TX IEEE 802.11ax(HE20) V (Ant. 1 + Ant. 2) IEEE 802.11nax(HE40) V (Ant. 1 + Ant. 2) For 5GHz: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A Internal N/A 2.69 2 N/A Internal N/A 2.65 Note: This EUT supports CDD, and antenna gains are not equal, 1) so Directional gain= 10log[(10 G1/20 +10 G2/20 +...10 GN/20 ) 2 /N]dBi, that is Directional gain=10log[(10 2.69/20 +10 2.65/20 ) 2 /2]dBi =5.68. 2) Beamforming Gain: 3dB, the Directional gain=3+2.69=5.69 Report No.: BTL-FCCP-3-2006C097A Page 5 of 6 4. Table for Antenna Configuration: For Non Beamforming: Operating Mode TX Mode 2TX IEEE 802.11a V (Ant. 1 + Ant. 2) IEEE 802.11n (HT20) V (Ant. 1 + Ant. 2) IEEE 802.11n (HT40) V (Ant. 1 + Ant. 2) IEEE 802.11ac (VHT20) V (Ant. 1 + Ant. 2) IEEE 802.11ac (VHT40) V (Ant. 1 + Ant. 2) IEEE 802.11ac (VHT80) V (Ant. 1 + Ant. 2) IEEE 802.11ax (HE20) V (Ant. 1 + Ant. 2) IEEE 802.11ax (HE40) V (Ant. 1 + Ant. 2) IEEE 802.11ax (HE80) V (Ant. 1 + Ant. 2) For Beamforming: Operating Mode TX Mode 2TX IEEE 802.11ac (VHT20) V (Ant. 1 + Ant. 2) IEEE 802.11ac (VHT40) V (Ant. 1 + Ant. 2) IEEE 802.11ac (VHT80) V (Ant. 1 + Ant. 2) IEEE 802.11ax (HE20) V (Ant. 1 + Ant. 2) IEEE 802.11ax (HE40) V (Ant. 1 + Ant. 2) IEEE 802.11ax (HE80) V (Ant. 1 + Ant. 2) Report No.: BTL-FCCP-3-2006C097A Page 6 of 6 3. TEST RESULTS For 2.4GHz Non Beamforming: Directional Gain (dBi) Directional Gain (numeric) Max. Average Output Power (dBm) Max. Average Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 3.00 1.9953 25.25 334.9654 0.13303 1 Complies For 2.4GHz Beamforming: Directional Gain (dBi) Directional Gain (numeric) Max. Average Output Power (dBm) Max. Average Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 6.00 3.9811 24.62 289.7344 0.22959 1 Complies For 5GHz UNII-1 Non Beamforming: Directional Gain (dBi) Directional Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 5.68 3.6983 25.29 338.0648 0.24886 1 Complies For 5GHz UNII-1 Beamforming: Directional Gain (dBi) Directional Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 5.69 3.7068 24.83 304.0885 0.22436 1 Complies For 5GHz UNII-3 Non Beamforming: Directional Gain (dBi) Directional Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 5.68 3.6983 26.59 456.0369 0.33570 1 Complies For 5GHz UNII-3 Beamforming: Directional Gain (dBi) Directional Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 5.69 3.7068 25.93 391.7419 0.28903 1 Complies For the max simultaneous transmission MPE: Power Density (S) (mW/cm 2 ) Power Density (S) (mW/cm 2 ) Total Limit of Power Density (S) (mW/cm 2 ) Test Result 2.4GHz 5GHz 0.22959 0.33570 0.56529 1 Complies Note: The calculated distance is 25 cm.…

Text truncated - open the document above for the full version.

Reprt No.: BTL-FCCP-2-2006C097A Page 1 of 339 FCC Radio Test Report FCC ID: TE7EAP620HD This report concerns: Original Grant Project No. : 2006C097A Equipment : AX1800 Wireless Dual-Band Gigabit Ceiling Mount Access Point Brand Name : tp-link Test Model : EAP620 HD Series Model : N/A Applicant : TP-Link Technologies Co., Ltd. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Manufacturer : TP-Link Technologies Co., Ltd. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Date of Receipt : Aug. 17, 2020 Date of Test : Aug. 17, 2020 ~ Nov. 03, 2020 Issued Date : Dec. 10, 2020 Report Version : R01 Test Sample : Engineering Sample No.:DG202008181 for conducted, DG202008183 for radiated Standard(s) : FCC Part15, Subpart E(15.407) ANSI C63.10-2013 FCC KDB 789033 D02 General UNII Test Procedures New Rules v02r01 FCC KDB 662911 D01 Multiple Transmitter Output v02r01 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Peggy Zhu Approved by : Ethan Ma Add: No.3, Jinshagang 1st Road, Shixia, Dalang Town,Dongguan, Guangdong, China. Tel: +86-769-8318-3000 Web: www.newbtl.com Reprt No.: BTL-FCCP-2-2006C097A Page 2 of 339 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture‟s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL‟s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer‟s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Reprt No.: BTL-FCCP-2-2006C097A Page 3 of 339 Table of Contents Page REPORT ISSUED HISTORY 6 1 . SUMMARY OF TEST RESULTS 7 1.1 TEST FACILITY 8 1.2 MEASUREMENT UNCERTAINTY 8 1.3 TEST ENVIRONMENT CONDITIONS 9 2 . GENERAL INFORMATION 10 2.1 GENERAL DESCRIPTION OF EUT 10 2.2 TEST MODES 13 2.3 PARAMETERS OF TEST SOFTWARE 16 2.4 DUTY CYCLE 17 2.5 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 19 2.6 SUPPORT UNITS 19 3 . AC POWER LINE CONDUCTED EMISSIONS TEST 20 3.1 LIMIT 20 3.2 TEST PROCEDURE 20 3.3 DEVIATION FROM TEST STANDARD 20 3.4 TEST SETUP 21 3.5 EUT OPERATION CONDITIONS 21 3.6 TEST RESULTS 21 4 . RADIATED EMISSIONS TEST 22 4.1 LIMIT 22 4.2 TEST PROCEDURE 23 4.3 DEVIATION FROM TEST STANDARD 23 4.4 TEST SETUP 24 4.5 EUT OPERATION CONDITIONS 25 4.6 TEST RESULTS - 9 KHZ to 30 MHZ 25 4.7 TEST RESULTS - 30 MHz TO 1000 MHz 25 4.8 TEST RESULTS - ABOVE 1000 MHz 25 5 . BANDWIDTH TEST 26 5.1 LIMIT 26 5.2 TEST PROCEDURE 26 5.3 DEVIATION FROM STANDARD 26 Reprt No.: BTL-FCCP-2-2006C097A Page 4 of 339 Table of Contents Page 5.4 TEST SETUP 27 5.5 EUT OPERATION CONDITIONS 27 5.6 TEST RESULTS 27 6 . MAXIMUM OUTPUT POWER TEST 28 6.1 LIMIT 28 6.2 TEST PROCEDURE 28 6.3 DEVIATION FROM STANDARD 28 6.4 TEST SETUP 28 6.5 EUT OPERATION CONDITIONS 28 6.6 TEST RESULTS 28 7 . POWER SPECTRAL DENSITY TEST 29 7.1 LIMIT 29 …

Text truncated - open the document above for the full version.