TET-S911LOCATORStarFinder AVL

______________________________ S-911 GPS Personal Locator User’s Manual & Reference Guide Revision 2.11 Copyright 2005 by Laipac Technology Inc. All Rights Reserved Table of Contents Welcome ..............................................................................................................2 S-911 Personal Locator Features ..............................................................................3 Electrical & Environmental....................................................................................4 GPS Engine Specifications ....................................................................................4 G e t t i n g S t a r t e d .......................................................................................6 S - 9 1 1 P e r s o n a l L o c a t o r ™ P h y s i c a l F e a t u r e s ..............................8 C h a r g i n g t h e b a t t e r y ............................................................................9 I n s e r t i n g t h e S I M c a r d ...................................................................... 10 O p e r a t i n g t h e S - 9 1 1 .......................................................................... 13 L e a r n i n g t h e B a s i c s o f t h e S - 9 1 1 P e r s o n a l L o c a t o r ............... 15 Report GPS Position in real-time by GSM or GPRS .................................................. 15 Data Logger for GPS Position (Waypoints) ............................................................. 15 2 Way Communication (Fixed Number Phone calls)................................................. 15 Instant Geo-Fence Setting .................................................................................. 16 Switch From SMS to GPRS Mode .......................................................................... 16 R e q u i r e d D e v i c e P r o g r a m m i n g P r o c e d u r e s ................................... 17 Configuring the S-911 ....................................................................................... 17 Frequently Asked Questions .................................................................................. 26 SAFETY PRECAUTIONS Remember to comply with legal requirements and local restrictions when using the S-911. For example in Airplanes, Gas Stations, Hospitals and any other environment where usage of GSM/CDMA equipment is prohibited. The S-911 can interfere with the functionality of pacemakers and hearing-aids. Users should use caution when keeping the S-911 in close proximity to such devices. For more information consult your physician. You may only open the S-911 to replace the battery or SIM card only. Only authorized battery replacements should be used and failure to comply will void the warranty and can cause serious injury. Under no circumstances should the user open the battery. D ISCLAIMER AND LIMITATION OF LIABILITY The specifications and information regarding the products in this manual are subjected to change without previous notice. All statements, information, and recommendations in this manual are believed to be accurate but are represented without warranty of any kind, express or implied, users must take full responsibility for their applications of any Products - Reproduction of the contents of this manual, in whole or in part, without written permission of Laipac Technology, Inc. is prohibited. S-911 Personal Locator, Instant Geofence and Silent Call 911 are the registered trade mark owned by Laipac Technology, Inc. This product contains Laipac’s S-911 software to work under Microsoft ® Windows XP operation system, including the use of Hyper Terminal, and Microsoft Office Access which are registered trademarks of Microsoft Inc. Laipac Technology Inc. and its suppliers assume no responsibility for any damage or loss resulting from the use of this product and user’s guide. Laipac Technology Inc. and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of the software. Laipac Technology Inc. and its suppliers assume no responsibility for any damage or loss caused by no connection of cell phone network, GPS network, and misconduct of monitoring operation, dead battery, or repairs Copyright 2005 by Laipac Technology, Inc. All Rights Reserved F EDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced cell phone, radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the device Laipac™ S-911 Personal Locator™ – User’s Manual & Reference Guide 2 Welcome Congratulations on purchasing the S-911 Personal Locator. The S-911 Personal Locator is a real-time personal tracking device which operates over GSM/GPRS networks and utilizes a built-in high sensitivity GPS receiver. Your S-911 contains... • a high sensitivity GPS receiver to connect to a laptop for in-car navigation •…

Text truncated - open the document above for the full version.

Date: Dec. 27, 2005 Federal Communications Commission Authorization and Evaluation Division FCC ID: TET-S911LOCATOR Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1. Schematics 2. Block Diagram 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Danny Lee Laipac Technology Inc.

Report No.: ER/2005/80021 ID: TET-S911LOCATOR Issue Date: May. 30, 2006 This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. 此報告是遵循本公司訂定之通用服務條款所製作發放。請注意此條款列印於背面，將本公司 之義務，免責，管轄權皆明確規範之。此報告結果除非另有說明僅對檢驗之樣品負責。本報告未經本公司書面許可，不可部份複製。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw APPENDIX 2 PHOTOGRAPHS OF EUT Report No.: ER/2005/80021 ID: TET-S911LOCATOR Issue Date: May. 30, 2006 This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. 此報告是遵循本公司訂定之通用服務條款所製作發放。請注意此條款列印於背面，將本公司 之義務，免責，管轄權皆明確規範之。此報告結果除非另有說明僅對檢驗之樣品負責。本報告未經本公司書面許可，不可部份複製。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw All of EUT Adaptor Report No.: ER/2005/80021 ID: TET-S911LOCATOR Issue Date: May. 30, 2006 This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. 此報告是遵循本公司訂定之通用服務條款所製作發放。請注意此條款列印於背面，將本公司 之義務，免責，管轄權皆明確規範之。此報告結果除非另有說明僅對檢驗之樣品負責。本報告未經本公司書面許可，不可部份複製。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Front View of EUT Back View of EUT Report No.: ER/2005/80021 ID: TET-S911LOCATOR Issue Date: May. 30, 2006 This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. 此報告是遵循本公司訂定之通用服務條款所製作發放。請注意此條款列印於背面，將本公司 之義務，免責，管轄權皆明確規範之。此報告結果除非另有說明僅對檢驗之樣品負責。本報告未經本公司書面許可，不可部份複製。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Top View of EUT Bottom View of EUT

FCC ID LABEL FORMAT AND LOCATION Applicant: Laipac Technology Inc. FCC ID: TET-S911LOCATOR FCC ID: TET-S911LOCATOR This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID LABEL AREA

Report No.: ER/2005/80021 ID: TET-S911LOCATOR Issue Date: May. 30, 2006 This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. 此報告是遵循本公司訂定之通用服務條款所製作發放。請注意此條款列印於背面，將本公司 之義務，免責，管轄權皆明確規範之。此報告結果除非另有說明僅對檢驗之樣品負責。本報告未經本公司書面許可，不可部份複製。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw APPENDIX 3 PHOTOGRAPHS OF EUT Report No.: ER/2005/80021 ID: TET-S911LOCATOR Issue Date: May. 30, 2006 This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. 此報告是遵循本公司訂定之通用服務條款所製作發放。請注意此條款列印於背面，將本公司 之義務，免責，管轄權皆明確規範之。此報告結果除非另有說明僅對檢驗之樣品負責。本報告未經本公司書面許可，不可部份複製。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Open View of EUT Internal of EUT - 1 Report No.: ER/2005/80021 ID: TET-S911LOCATOR Issue Date: May. 30, 2006 This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. 此報告是遵循本公司訂定之通用服務條款所製作發放。請注意此條款列印於背面，將本公司 之義務，免責，管轄權皆明確規範之。此報告結果除非另有說明僅對檢驗之樣品負責。本報告未經本公司書面許可，不可部份複製。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Internal of EUT – 2 Internal of EUT – 3 Report No.: ER/2005/80021 ID: TET-S911LOCATOR Issue Date: May. 30, 2006 This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. 此報告是遵循本公司訂定之通用服務條款所製作發放。請注意此條款列印於背面，將本公司 之義務，免責，管轄權皆明確規範之。此報告結果除非另有說明僅對檢驗之樣品負責。本報告未經本公司書面許可，不可部份複製。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Internal of EUT – 4 Internal of EUT --- 5 Report No.: ER/2005/80021 ID: TET-S911LOCATOR Issue Date: May. 30, 2006 This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. 此報告是遵循本公司訂定之通用服務條款所製作發放。請注意此條款列印於背面，將本公司 之義務，免責，管轄權皆明確規範之。此報告結果除非另有說明僅對檢驗之樣品負責。本報告未經本公司書面許可，不可部份複製。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Internal of EUT --- 6 Internal of EUT --- 7 Report No.: ER/2005/80021 ID: TET-S911LOCATOR Issue Date: May. 30, 2006 This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf. Attention is drawn to the limitations of liability, indemnification, and Jurisdictional issued defined therein. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. 此報告是遵循本公司訂定之通用服務條款所製作發放。請注意此條款列印於背面，將本公司 之義務，免責，管轄權皆明確規範之。此報告結果除非另有說明僅對檢驗之樣品負責。本報告未經本公司書面許可，不可部份複製。 SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw Internal of EUT --- 8 Internal of EUT --- 9

Tune Up procedures for Q2426. __________________________________________________________________________________ ________ This paper aims to explain the function of each radio parameters which are in the eeprom, the way to calculate each of them and the way to load them in the eeprom. - ThinDacValue : (former THIN_DAC_INIT_VALUE in the file EEPROM.H). The value given to this parameter is loaded in the 10 bits AFC DAC when the mobile is powered on. For more explanation about this parameter, have a look to the description of the parameter RoughDacValue below. The global excursion of the thin DAC is about 30 ppm, so the slope is about - 0.03 ppm for one step. It means that when the value loaded in the thin DAC is increased by one, the frequency of the VCXO decrease by 0.03 ppm. The thin DAC is used by the software to controle the frequency of the VCXO when the mobile is synchronised on the network to compensate doppler and temperature drift. - RoughDacValue : (former CARTE_DAC_INIT_VALUE in the file EEPROM.H). The value given to this parameter is loaded in the 8 bits DAC (GTI radio) 3 bits DAC (GISMO radio) when the mobile is powered on. This value should be such that the VCXO accuracy is better than 0.1 ppm at a temperature of 20 ° C when both ThinDacValue and RoughDacValue are loaded. The global excursion of the Rough DAC is about 80 ppm, so the slope is about + 0.3 ppm by step for GTI radio and + 10 ppm by step for GISMO radio. It means that when the value loaded in the rough DAC is increased by one the frequency of the VCXO increase by 0.3 ppm (GTI radio) 10 ppm (GISMO radio). The rough DAC is used by the software to compensate aging drift of VCXO. A good way to calculate the value to give to the parameters ThinDacValue and RoughDacValue, is to measure by any mean the frequency of the VCXO while the value loaded in the two DAC are half the excursion (512 for the thin DAC, 128 for the rough DAC for GTI radio, 4 for the rough DAC for GISMO radio). Then, calculate first the best value to give to RoughDacValue and then the best value to give to the ThinDacValue. As the slope of the rough DAC and of the thin DAC may vary around the value given, the whole process should be lead again one or two time. e.g : the measure of the VCXO give 13.0002 MHz ∆f/f = 200/13 E6 = +15.4 ppm For WISMO radio : The value loaded in the rough DAC should be decreased by (15.4 + 5) / 10 = 2 So RoughDacValue = 4 - 2 = 2. Then there is (15.4 - 10 x 2) = - 4.6 ppm left to be compensated with the thin DAC. To do so, the value loaded in the thin DAC should be decreased by 4.6 / 0.03 = 153. 1 So ThinDacValue = 512 - 180 = 358. - PwrVsAgcSlope : (former D_PWR_VS_AGC_SLOPE in the file EEPROM.H). This parameter is proportionate to the slope of the straight line describing the power on the antenna expressed in dBm versus the Agc value loaded in the 8 bits Agc DAC. To calculate the value to give to this parameter, multiply the previous slope by -128. Notice that PwrVsAgcSlope = 128x128 / AgcVsPwrSlope. e.g : if the slope is -0.4 dBm by Agc step, PwrVsAgcSlope = -128 x (-0.4) = 51. Notice that the straight line describing the power on the antenna versus the Agc must be built when the level on I and Q ADC is constant whatever the power on the antenna is. To do so, the nominal software can be used when synchronisation is possible. To make the synchronisation possible, the parameters ThinDacValue and RoughDacValue should be calculated as described and likely values should be given to the parameters PwrVsAgcSlope (e.g 51), AgcVsPwrSlope (e.g 320), BoardGain (e.g 40) and VoltageOrder (e.g 90). Then one can try to synchronise on a test set (e.g HP 8922) and tune the power and then read the Agc order for several value of power. The Agc order can be read in the top of the PC screen while using HAPC software. The right field is the second Agc field of the second line of the parameters displayed. It is just on the left of the Mkr field. Of course the value of the power on the antenna must be read on the test set and not in the Pwr field. Notice that the Mkr field should be rather constant while the power increase or decrease because of the software control even if the parameters are not good, however, the calculation may be improved by leading again the whole process using, the values obtained for PwrVsAgcSlope and AgcVsPwrSlope. - AgcVsPwrSlope : (former D_AGC_VS_PWR_SLOPE in the file EEPROM.H). This parameter is proportionate to the slope of the straight line describing the Agc value loaded in the 8 bits Agc DAC versus the power on the antenna expressed in dBm. To calculate the value to give to this parameter, multiply the previous slope by -128. e.g : if the slope is -2.5 Agc step by dBm , AgcVsPwrSlope = -128 x (-2.5) = 320. Notice that AgcVsPwrSlope = 128x128 / PwrVsAgcSlope. See above, description of the PwrVsAgcSlope. - VoltageOrder : (Former VOLTAGE_ORDER_VALUE in the file EEPROM.H). This parameter is expressed in step of Agc DAC. It allows to adjust the voltage on the I and Q kernel DAC egaliser entrance. The voltage should be about 1 V pp. If VoltageOrder is increased by one, the voltage on I and Q increased by about 0.05 V. To calculate the right value, give a likely value to this parameter, and measure the voltage when the mobile is synchronised (see the process described for the calculation of the parameter PwrVsAgcSlope). Then measure the voltage on the kernel DAC egaliser entrance and adjust the value of VoltageOrder until the right voltage is obtained. 2 Notice that when a voltage of 1 Vpp on I and Q kernel entrance is obtained, the parameter Mkr displayed on the screen while using the HAPC software should be about 20. If not, there certainly some hardware trouble. - BoardGain : (Former BOARD_SPECIFIC_GAIN in the file EEPROM.H). This parameter is expressed in dB and corresponds to the gain of the radio reception channel. To calculate this parameter, a mean value being given to BoardGain (e.g 40), try to synchronise on a …

Text truncated - open the document above for the full version.

This document is issued by the Company subject to its General Conditions of Service which is available on request or accessible atwww.sgs.com. Attention is drawnto the limitations of liability, indemnification and jurisdictional issues defined therein.Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested.This document cannot be reproduced except in full, without priorapproval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.此報告是遵循本公司訂 定之通用服務條款所製作發放，相關服務條款備索，或可在www.sgs.com中查閱，本公司之義務、免責、管轄權皆明確規範其中。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可， 不可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan248/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886- 2) 2299–3279f (886-2) 2298–0488www.tw.sgs.com Member of SGS Group Report No. : ES/2005/C0006 Page : 1 of 49 TEST REPORT Equipment Under Test : S-911 Personal Locator Model No. : S-911 205/206 FCC ID : TET-S911LOCATOR Applicant : Laipac Technology Inc. Address of Applicant : 55 West Beaver Creek Rd., Unit 1, Richmond Hill, Ontario, L4B 1K5, Canada Date of Receipt : 2005.12.05 Date of Test(s) : 2006.06.06~2006.07.03 Date of Issue : 2006.07.03 Standards: FCC OET Bulletin 65 supplement C, ANSI/IEEE C95.1 , C95.3, IEEE 1528 In the configuration tested, the EUT complied with the standards specified above. Remarks: This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS Taiwan E&E Services or testing done by SGS Taiwan E&E Services in connection with distribution or use of the product described in this report must be approved by SGS Taiwan E&E Services in writing. Tested by : Leo Hsu Date : 2006.07.03 Approved by : Robert Chang Date : 2006.07.03 This document is issued by the Company subject to its General Conditions of Service which is available on request or accessible atwww.sgs.com. Attention is drawnto the limitations of liability, indemnification and jurisdictional issues defined therein.Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested.This document cannot be reproduced except in full, without priorapproval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.此報告是遵循本公司訂 定之通用服務條款所製作發放，相關服務條款備索，或可在www.sgs.com中查閱，本公司之義務、免責、管轄權皆明確規範其中。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可， 不可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan248/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886- 2) 2299–3279f (886-2) 2298–0488www.tw.sgs.com Member of SGS Group Report No. : ES/2005/C0006 Page : 2 of 49 Contents 1. General Information 1.1 Testing Laboratory 4 1.2 Details of Applicant 4 1.3 Description of EUT 4 1.4 Test Environment 5 1.5 Operation description 5 1.6 The SAR Measurement System 5 1.7 System Components 7 1.8 SAR System Verification 8 1.9 Tissue Simulant Fluid for the Frequency Band 9 1.10 Test Standards and Limits 10 2. Summary of Results 13 3. Instruments List 15 4. Measurements 16 GSM 850MHz 4.1.1 Right-head, cheek, lowest channel 16 4.1.2 Right-head, cheek, middle channel 17 4.1.3 Right-head, cheek, highest channel 18 4.1.4 Left-head, cheek, lowest channel 19 4.1.5 Left-head, cheek, middle channel 20 4.1.6 Left-head, cheek, highest channel 21 4.1.7 Right-head, tilt 15°, lowest channel 22 4.1.8 Right-head, tilt 15°, middle channel 23 4.1.9 Right-head, tilt 15°, highest channel 24 4.1.10 Left-head, tilt 15°, lowest channel 25 4.1.11 Left-head, tilt 15°, middle channel 26 4. 1.12 Left-head, tilt 15°, highest channel 27 4.1.13 Body(testing in GPRS mode), lowest channel 28 4.1.14 Body(testing in GPRS mode), middle channel 29 4.1.15 Body(testing in GPRS mode), highest channel 30 PCS 1900MHz 4.2.1 Right-head, cheek, lowest channel 31 4.2.2 Right-head, cheek, middle channel 32 4.2.3 Right-head, cheek, highest channel 33 4.2.4 Left-head, cheek, lowest channel 34 4.2.5 Left-head, cheek, middle channel 35 4.2.6 Left-head, cheek, highest channel 36 4.2.7 Right-head, tilt 15°, lowest channel 37 4.2.8 Right-head, tilt 15°, middle channel 38 This document is issued by the Company subject to its General Conditions of Service which is available on request or accessible atwww.sgs.com. Attention is drawnto the limitations of liability, indemnification and jurisdictional issues defined therein.Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested.This document cannot be reproduced except in full, without priorapproval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.此報告是遵循本公司訂 定之通用服務條款所製作發放，相關服務條款備索，或可在www.sgs.com中查閱，本公司之義務、免責、管轄權皆明確規範其中。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可， 不可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan248/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886- 2) 2299–3279f (886-2) 2298–0488www.tw.sgs.com Member of SGS Group Report No. : ES/2005/C0006 Page : 3 of 49 4.2.9 Right-head, tilt 15°, highest channel 39 4.2.10 Left-head, tilt 15°, lowest channel 40 4.2.11 Left-head, tilt 15°, middle channel 41 4.2.12 Left-head, tilt 15°, highest channel 42…

Text truncated - open the document above for the full version.

This document is issued by the Company subject to its General Conditions of Service which is available on request or accessible atwww.sgs.com. Attention is drawnto the limitations of liability, indemnification and jurisdictional issues defined therein.Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested.This document cannot be reproduced except in full, without priorapproval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.此報告是遵循本公司訂 定之通用服務條款所製作發放，相關服務條款備索，或可在www.sgs.com中查閱，本公司之義務、免責、管轄權皆明確規範其中。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可， 不可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan248/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886- 2) 2299–3279f (886-2) 2298–0488www.tw.sgs.com Member of SGS Group Report No. : ES/2005/C0006 Page : 1 of 21 Contents APPENDIX 1. Photographs of Test Setup 02 2. Photographs of EUT 05 3. Photographs of the Battery 07 4. Probe Calibration certificate 08 5. Uncertainty Analysis 16 6. Phantom description 17 7. System Validation from Original equipment supplier 18 This document is issued by the Company subject to its General Conditions of Service which is available on request or accessible atwww.sgs.com. Attention is drawnto the limitations of liability, indemnification and jurisdictional issues defined therein.Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested.This document cannot be reproduced except in full, without priorapproval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.此報告是遵循本公司訂 定之通用服務條款所製作發放，相關服務條款備索，或可在www.sgs.com中查閱，本公司之義務、免責、管轄權皆明確規範其中。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可， 不可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan248/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886- 2) 2299–3279f (886-2) 2298–0488www.tw.sgs.com Member of SGS Group Report No. : ES/2005/C0006 Page : 2 of 21 Appendix Photographs of Test Setup Fig.1 Photograph of the SAR measurement System Fig.2.1 Photograph of the Tissue Simulant Fluid liquid depth 15cm for Left-head Side Fig.2.2 Photograph of the Tissue Simulant Fluid liquid depth 15cm for Right-head Side 15 cm 900MHz 15 cm 1900MHz This document is issued by the Company subject to its General Conditions of Service which is available on request or accessible atwww.sgs.com. Attention is drawnto the limitations of liability, indemnification and jurisdictional issues defined therein…

Text truncated - open the document above for the full version.