TKZVIRTU901Wireless AP Router

WiBRAVO Virtu 901 User Manual i User Manual Version: 1.0 Model: Virtu 901 FCC ID: TKZVirtu901 Product: Wireless AP Router WiBRAVO Virtu 901 User Manual ii Trademarks Copyright @2008 Contents are subject to change without notice. All trademarks belong to their respective proprietors. Copyright Statement THIS DOCUMENT CONTAINS OF PROPRIETARY TECHNICAL INFORMATION THAT IS THE PROPERTY OF THIS COMPANY. AND NO PART OF THIS DOCUMENTATION MAY BE REPRODUCED, STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRICAL OR MECHANICAL, BY PHOTOCOPYING, RECORDING, OR OTHERWISE, WITHOUT THE PRIOR WRITTEN CONSENT OF THIS COMPANY. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. WiBRAVO Virtu 901 User Manual iii Table of Contents REVISION HISTORY .................................................................................................................. VI TERMINOLOGY .......................................................................................................................... VI 1 INTRODUCTION.................................................................................................................... 1 1.1 PACKAGE CONTENTS ............................................................................................................ 1 1.2 PRODUCT SPECIFICATIONS ................................................................................................... 1 1.3 PRODUCT FEATURES ............................................................................................................ 2 1.4 PANEL DESCRIPTION (2TX2R).............................................................................................. 3 2 INSTALLATION ..................................................................................................................... 4 2.1 HARDWARE INSTALLATION .................................................................................................. 4 2.2 SOFTWARE INSTALLATION .................................................................................................... 5 3 SOFTWARE CONFIGURATION ......................................................................................... 6 3.1 PREPARE YOUR PC TO CONFIGURE THE WLAN BROADBAND ROUTER ................................ 6 3.2 CONNECT TO THE WLAN BROADBAND ROUTER ................................................................. 8 3.3 MANAGEMENT AND CONFIGURATION ON THE WLAN BROADBAND ROUTER ....................... 8 3.3.1 Status .......................................................................................................................... 8 3.3.2 Setup Wizard ............................................................................................................ 11 I Operation Mode ....................................................................................................... 11 II Time Zone Setting .................................................................................................... 12 III LAN Interface Setup ................................................................................................ 12 IV WAN Interface Setup ............................................................................................... 13 V Wireless Basic Settings ............................................................................................ 13 VI Wireless Security Setup ........................................................................................... 14 3.3.3 Operation Mode ....................................................................................................... 14 3.3.4 Wireless - Basic Settings .......................................................................................... 15 3.3.5 Wireless - Advanced Settings .................................................................................. 17 3.3.6 Wireless - Security Setup ......................................................................................... 19 3.3.7 Wireless - Access Control ........................................................................................ 21 3.3.8 WDS Setting…

Text truncated - open the document above for the full version.

AsiaRF Ltd. 4F, No.2, Lane560, Zhongzheng Rd., Xindian City, Taipei Country 231, Taiwan (2010-2-5) To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: TKZVirtu901 To Whom It May Concern: This letter is to ascertain that _ AsiaRF Ltd. Product name: Wireless AP Router Model No.: Virtu 901 has been the units used for conducting FCC compliance testing, the DoC part will be tested by FCC recognized test lab. If you have any question or concerns, pls. contact us. Sincerely, Client’s signature: Client’s name / title Paul Lai Manager Contact information / address AsiaRF Ltd. 4F, No.2, Lane560, Zhongzheng Rd., Xindian City, Taipei Country 231, Taiwan

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Revised wording (current) 1.0 2.0 Sept–25-2007 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 2.0 AsiaRF Ltd. 4F, No.2, Lane560, Zhongzheng Rd., Xindian City, Taipei Country 231, Taiwan (2010-2-5) To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, _ AsiaRF Ltd. _hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product name: Wireless AP Router Model No.: Virtu 901 We affirm that between SIEMIC and _ AsiaRF Ltd. _, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature: Client’s name / title Paul Lai Manager Contact information / address AsiaRF Ltd. 4F, No.2, Lane560, Zhongzheng Rd., Xindian City, Taipei Country 231, Taiwan

SCS-F19: Confidentiality Request Letter Rev 1.0 Nov 14, 2006 Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 SCS-F19: Confidentiality Request Letter Rev 1.0 Nov 14, 2006 AsiaRF Ltd. 4F, No.2, Lane560, Zhongzheng Rd., Xindian City, Taipei Country 231, Taiwan (2010-2-5) To: Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID:TKZVirtu901 We hereby request confidential treatment of information accompanying this application as outlined below: --Block Diagram --Operational Description --Schematic The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature: Client’s name / title Paul Lai Manager Contact information / address AsiaRF Ltd. 4F, No.2, Lane560, Zhongzheng Rd., Xindian City, Taipei Country 231, Taiwan

External photos

Label Information Wireless AP Router Model No.: Virtu 901 FCC ID: TKZVirtu901 Country of Origin: China AsiaRF Ltd. FCC Caution: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Location FCC ID Label Location

Internal Photos

MPE CALCULATION RF Exposure Requirements: 47 CFR § 1.1307(b) RF Radiation Exposure Limits: 47 CFR § 1.1310 RF Radiation Exposure Guidelines: FCC OST/OET Bulletin Number 65 / 47 CFR § 2.1091 EUT Frequency Band: 2412 – 2462 MHz Limits for General Population/Uncontrolled Exposure in the band of: 1500 –100,000 MHz Power Density Limit: 1.0mW/ cm 2 ; Equation: S = PG / 4π R2 or R = √ PG / 4π S Where, S = Power Density P = Power Input to Antenna G = Antenna Gain R = distance to the center of radiated antenna For Frequency 2412-2462MHz Middle Channel (2437 MHz): Power = 17.60 dBm, Antenna Gain = 2 dBi, Prediction distance 20 cm S = 0.03631 mW/cm 2 For Frequency 2422-2452MHz Middle Channel (2437 MHz): Power = 15.91 dBm, Antenna Gain = 2 dBi, Prediction distance 20 cm S = 0.02461mW/cm 2 Result The Above Result had shown that Device complied with 1.0 mW/cm2 Power density requirement for distance of 20 cm.

SHENZHEN SETEK TECHNOLOGY CO., LTD. Report No.: FCI1001081R Page 1 of 79 FCC TEST REPORT REPORT NO.: FCI1001081R MODEL NO.: Virtu 901 RECEIVED: Jan. 22, 2010 TESTED: Jan. 25, 2010 to Feb. 08, 2010 APPLICANT: AsiaRF Ltd. ADDRESS: 4F, No.2, Lane560, Zhongzheng Rd., Xindian City, Taipei Country 231, Taiwan ISSUED BY: SHENZHEN SETEK TECHNOLOGY CO., LTD. LAB LOCATION: 2/F,A3 Bldg, East Industry Zone, Overseas Chinese Town, Shenzhen, China This test report consists of 79 pages in total, it may be duplicated completely for legal use with the approval of the applicant, It should not be reproduced except in full, without the written approval of our laboratory, The test results in the report only apply to the tested sample. SHENZHEN SETEK TECHNOLOGY CO., LTD. Our website: www.setek.com.cn E-mail: [email protected] TEL:86-755-26966362 FAX: 86-755-26966270 SHENZHEN SETEK TECHNOLOGY CO., LTD. Report No.: FCI1001081R The device described above is tested by SHENZHEN SETEK TECHNOLOGY CO., LTD. to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. This report applies to above tested sample only and shall not be reproduced in part without written approval of SHENZHEN SETEK TECHNOLOGY CO., LTD. Page 2 of 79 Prepared for : AsiaRF Ltd. Address : 4F, No.2, Lane560, Zhongzheng Rd., Xindian City, Taipei Country 231, Taiwan Product : Wireless AP Router Model No(s). : Virtu 901 Trademark : ViBRAVO Test Standard : FCC Part 15 Paragraph 15.247 Prepared by : SHENZHEN SETEK TECHNOLOGY CO., LTD. Address : 2/F, A3 Bldg, East Industry Zone, Overseas Chinese Town, Shenzhen, China Tel: (86-755) 26966362 Fax:(86-755) 26966270 Test Lab : SEM Test Compliance Service Co., Ltd. Address : 3/F, Jinbao Commerce Bldg., Xin’an Fanshen Rd., Bao’an District, Shenzhen, P. R. China FCC R.N. : FCC Registration Number: 994117 Prepared by : (Engineer) Reviewer by : (Project Engineer) Approved by : (Manager) Report Number : FCI1001081R Date of Test : Jan. 25, 2010 to Feb. 08, 2010 Date of Report : Feb. 09, 2010 FCC ID : TKZVirtu901 SHENZHEN SETEK TECHNOLOGY CO., LTD. Report No.: FCI1001081R The device described above is tested by SHENZHEN SETEK TECHNOLOGY CO., LTD. to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. This report applies to above tested sample only and shall not be reproduced in part without written approval of SHENZHEN SETEK TECHNOLOGY CO., LTD. Page 3 of 79 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ............................................................................................................ 5 1.1 Description of Device (EUT)........................................................................................................................ 5 1.2 Test Summary ............................................................................................................................................... 6 1.3. Description of Support Device .................................................................................................................... 7 1.4. Standards Applicable for Testing ................................................................................................................ 7 1.5. List of Measuring Equipments Used ........................................................................................................... 8 1.6. Test Facility ................................................................................................................................................. 8 2. ANTENNA REQUIREMENT .............................................................................................................. 9 2.1 Standard Applicable......................................................................................................................................... 9 2.2 Test Result ....................................................................................................................................................... 9 3. CONDUCTED EMISSION TEST .....................................................................................................10 3.1 Standard Applicable.................................................................................................................................... 10 3.2 Test Equipment ........................................................................................................................................... 10 3.3 Test Procedure ............................................................................................................................................ 10 3.4 Conducted Test Setup ................................................................................................................................. 10 3.5 Environmental Conditions .......................................................................................................................... 11 3.6 Summary of Test Results ............................................................................................................................ 11 4 POWER SPECTRAL DENSITY .................................................................................................. 12 4.1 Standard Applicable.................................................................................................................................... 12 4.2 Test Equipment List and Details................................................................................................................. 12 4.3 Test Procedure ............................................................................................................................................ 12 4.4 Environmental Conditions .......................................................................................................................... 12 4.5 Summary of Test Results ...…

Text truncated - open the document above for the full version.

Setup Photos