TL4095210Wireless Optical Mouse

e Wireless Optical Mouse User Manual ped wireless RF mice in our company, and it uses the global-used frequency of 27MHz. The comfortable and e bondage of wires and enjoy your beautiful life from the high technology. n many mice being used at the same time. nd scientific. charge for the mouse. Even if there is no battery in the mouse, you can use the mouse directly, thus it resolve matically, at this time, mouse begin to work. If you push the receiver back to the transmitter, power will be cut The Steps of Install Battery 1, Please prepare for two PCS new AAA alkaline batteries 2, Press the button of the mouse upper cover and pull the battery cover rearward (Please see the referenc 3, Please insert the batteries correctly according to the polarity marks of the battery grooves. 4, Pull the battery covers forward, when you hear “crack” sound which shows the battery cover is locked su Receiver Installation 1, please use extended cable, and put the receiver and transmitter on one desktop, in this way, you may hav 2, If you use PS/2 connector, please use the USB to PS/2 adaptor and connect with the connector before yo 3, For laptop, you may connect the receiver directly with the USB connector. ID Setup 1, Please move the mouse near to the receiver 2, Press the ID button of the mouse bottom with some hard and acuate object within 10 seconds, the re c successfully to finish the digital transmission between the mouse and the receiver. You may start to use 3. Working distance: within 0.6-1.5 m , please change batteries or charge them .The mouse can use USB line to charge, connect one side of USB he mouse, thus it can successfully charge the battery. It can charge while you use the mouse. It is full within that the time of charge may vary when the degree of discharge is different. more smoothly. n be used longer time. Please remove the batteries if the mouse will not be used for a long time or if you travel scroll the wheel to wake up the mouse when it is sleeping. witch of the mouse bottom over 3 secons.If you want to take on the power,please click the ID switch once again. cting surface, 3D mouse pad. ashes, which shows that the power is nearly finished. Please change the proper-sized new battery or charge it se on business, and press the switch of ID for a long time so as to switch off the power. Any changes or modifications not expressly approved by the party responsible for compliance could v Note Note: This equipment has been tested and found to comply with the limits for a Class B digital devic e reasonable protection against harmful interference in a residential installation. This equipment genera accordance with the instructions, may cause harmful interfer- ence to radio communications. Howeve If this equipment does cause harmful interference to radio or television reception, which can be determ the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condition accept any interference received, including interference that may cause undesired operation.

External Photos EUT – Top View EUT – Bottom View

ID Label Label FCC ID: TL4095210

ID Label/Location Label Location Information Specifications: Text is Black or white in color and is left justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Refer to the below arrow.

Internal Photos EUT – Uncover View EUT – Open View EUT – PCB Top View EUT – PCB Bottom View

ET TECH BOM MODEL ： 095210 TX VER ： A0 DATE ： 2005-05-21 No： ET-05212802T By:yuheping QR-098 No component name model quartity remark 1 PCB 1.6 × 75.5 × 40.5mm 1 2128-B TX Rev02 2 IC A2051 DIP16pin 1 U1 3 IC MA6221-S7K FWEE*** SSOP28pin 1 U2 4 IC 3V SOT89 1 U3 5 IC 4V SOT89 1 U4 6 DIODE MA729 0805 2 D1 ， D4 7 DIODE 1N4148 Atype （ 1206 ） 1 D2 8 DIODE HLMP-ED80-KP000 1 D5 9 DIODE φ 3mmRed 1 D3 10 LENSE 1 11 Switch 70gf 6 × 6 × 6 3 SW-R ， SW-L ， SW-M 12 Switch 100gf 6 × 6 × 4.3mm 1 SW-ID 13 Encoder H=9.75mm 1 SW-EN 14 crystal 76.8KHz 1 X1 15 crystal 27.042MHz 16pF 20PPM 1 X2 16 crystal 18MHz 1 X3 17 inductance 0.82uH 1210 （ Btype ） 1 L3 18 inductance 220uH RL0406-221K 2 L1 ， L2 19 Resistance 15K 0603 1 R2 20 Resistance 4.7M 0603 1 R3 21 Resistance 1K 0603 2 R4 ， R12 22 Resistance 560R 0603 1 R5 23 Resistance 680K 0603 1 R10 24 Resistance 1M6 0603 1 R11 25 capacitance 100uF 1210(B type) 2 C1 ， C2 26 capacitance 100nF 0603 3 C3 ， C11 ， C15 27 capacitance 1 pF 0603 1 C4 ET TECH BOM MODEL ： 095210 TX VER ： A0 DATE ： 2005-05-21 No： ET-05212802T By:yuheping QR-098 28 capacitance 15 pF 0603 1 C5 29 capacitance 22 pF 0603 3 C6 ， C7 ， C10 30 capacitance 33pF 0603 1 C9 31 capacitance 75pF 0603 1 C12 32 capacitance 30pF 0603 1 C13 33 capacitance 10nF 0603 1 C14 34 capacitance 10uF 1206 （ A type ） 2 C16 ， C17 35 capacitance 220uF 6 × 8 1 C18 36 Dynatron 2S8050 Ic=1A β =100~200 SOT89 1 Q1 37 Resistance 1K 0603 1 R15 38 Resistance 10K 1% 0603 1 R17 3 Resistance 51K 1% 0603 1 R18 40 IC TL431 1% SOT23 1 Q2 41 Connector SMD Mini USB PULL 1 JP1 42 Switch 6 × 13 × 6 1 K1

095210 TX 1 2 34 A BC D 4 3 2 1 D CB A Title Number Revision Size A4 Date: 21-May-2005 Sheet of File: F:\yuheping\RD\2128\2128.ddb Drawn By: PCBANT SWEN R3 L3 D1 C6C7 C11 SW_ID C12 C10 C8 X1 C9 PD SW_RSW_MSW_L + C18 SCLK SDIO C15 R2 + C16 X3 D5 PD VDD REFB 8 REFA 7 XY_LED 6 YA 5 YB 4 XB 3 XA 2 SCLK 1 OSC_IN 9 GND 10 OSC_OUT 11 GND 12 VDD 13 R_BIN 14 PD 15 SDIO 16 U1 SDIO SCLK LBUT 7 MBUT 6 RBUT 5 VDD 4 OSC2 3 VSS 2 OSC1 1 RFOUT 8 ORFIN0 9 ORFIN1 10 ORFO 11 TXD 12 PD 13 WA 14 WB 15 Z1IN 16 Z2IN 17 SDIO 18 SCLK 19 BATL 20 TYPE 21 TXCB 22 BBUT 23 FBUT 24 SVD_IN 25 DCVR 26 VL 27 VL_NM 28 U2 C13 C4 X2 C5 -+ VBAT L1 + C17 L4 VSS 1 OUT 2 LX 3 U4 VDD D4 + C2 VSS 1 OUT 2 LX 3 U3 R1 VDD VBT vcc U1 Add Remove A2030A2051 R1 U4,L4,D4 U3,L1,D1 R1 R5 D3 C3 K1 D2 R12 Q2 Q1 R17R18 R15 VCC 1 D- 2 D+ 3 GND 4 JP1 +C1

Note: The test report is specially limited to the above company and this particular sample only. It may not be duplicated without prior written consent of Bay Area Compliance Lab Corp. (ShenZhen). This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the US Government. FCC PART 15.227 EMI MEASUREMENT AND TEST REPORT For Verbatim 1200 West W.T. Harris Blvd.Charlotte, NC 28262, USA FCC ID: TL4095210 September 1, 2005 This Report Concerns: Original Report Equipment Type: Wireless optical mouse Test Engineer: Louise Lu and Hansen Hu Report No.: RSZ05071503 Test Date: August 16-25, 2004 Reviewed By: Chris Zeng Prepared By: Bay Area Compliance Lab Corp. (ShenZhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone, ShenZhen, Guangdong 518038, P.R.China Tel: 86-755-33320018 Fax: 86-755-33320008 Verbatim FCC ID: TL4095210 Report # B0509092Rpt Page 2 of 15 FCC Part 15.227 Test Report TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................................................3 OBJECTIVE...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................3 TEST METHODOLOGY..................................................................................................................................................3 TEST FACILITY.............................................................................................................................................................3 SYSTEM TEST CONFIGURATION ..........................................................................................................................4 JUSTIFICATION.............................................................................................................................................................4 EUT EXERCISE SOFTWARE..........................................................................................................................................4 SPECIAL ACCESSORIES.................................................................................................................................................4 EQUIPMENT MODIFICATIONS.......................................................................................................................................4 CONFIGURATION OF TEST SETUP.................................................................................................................................5 BLOCK DIAGRAM OF TEST SETUP................................................................................................................................5 SUMMARY OF TEST RESULTS ...............................................................................................................................6 §15.203 - ANTENNA REQUIREMENT......................................................................................................................7 STANDARD APPLICABLE..............................................................................................................................................7 §15.205, §15.209, §15.227(A) - RADIATED EMISSIONS TEST ..............................................................................8 MEASUREMENT UNCERTAINTY....................................................................................................................................8 EUT SETUP..................................................................................................................................................................8 EMI TEST RECEIVER SETUP........................................................................................................................................8 TEST EQUIPMENT LIST AND DETAILS...........................................................................................................................9 CORRECTED AMPLITUDE & MARGIN CALCULATION...................................................................................................9 TEST RESULTS SUMMARY............................................................................................................................................9 TEST DATA..................................................................................................................................................................9 §15.227(B) - OUT OF BAND EMISSION .................................................................................................................13 EMI TEST RECEIVER SETUP......................................................................................................................................13 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................13 TEST PROCEDURE......................................................................................................................................................13 TEST DATA................................................................................................................................................................13 Verbatim FCC ID: TL4095210 Report # B0509092Rpt Page 3 of 15 FCC Part 15.227 Test Report GENERAL INFORMATION Product Description for Equipment Under Test (EUT) The Verbatim’s product, model number: 095210 or the "EUT" as referred to in this report is a Wireless optical mouse. The EUT is measured approximately 8.3cmL x 4.8cmW x 2.7cmH, rated input voltage: DC 3 V battery…

Text truncated - open the document above for the full version.

Test Setup Photos Radiated Emission - Front View Radiated Emission - Rear View