TLZ-CU668IEEE802.11 a/b/g/n/ac/ax and Bluetooth LE 5.4 LGA Module

AzureWave Technologies, Inc. 8F., No.94, Baozhong Rd. , Xindian Dist., New Taipei City , Taiwan 231 Attestation Statements Date: 2025/7/24 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia MD 21046 USA Ref: Attestation Statements Part 2.911(d)(5)(i) and Part 2.911(d)(5)(ii) Filing FCC ID：TLZ-CU668 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) AzureWave Technologies, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. AzureWave Technologies, Inc. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Statement for 47 CFR section 2.911(d)(5)(ii) AzureWave Technologies, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Respectfully, Applicant’s company name : AzureWave Technologies, Inc. Applicant’s company address : 8F., No.94, Baozhong Rd. , Xindian Dist., New Taipei City , Taiwan 231 Signature : Name and Job Title : Patrick Lin / Director E-Mail : [email protected] Tel : 02-55995599 Fax : 02-66289666

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service:  cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB)  cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab)  Agent can be Individual Entity or a Company Entity  Agent Entity must be located in US, US address/phone  Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter)  Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. AzureWave Technologies, Inc. 8F., No.94, Baozhong Rd. , Xindian Dist., New Taipei City , Taiwan 231 U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent ) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by secti on 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: February 17, 2025 Signed by (Printed Name/Title): Nathan Grinager / Co-President The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: AzureWave Technologies, Inc. Service Type: original application, class 2 permissive change Grantee Code: TLZ Grantee FRN: 0013946611 Module type: (single-modular transmitter) Contact Name: Patrick Lin Street Address: 8F., No.94, Baozhong Rd. , Xindian Dist. City/Province/Zip: New Taipei City , Taiwan 231 Telephone No: 02-55995599 *5580 Email: [email protected] Applicant Signature: Date: February 13, 2025 Signed by (Printed Name/Title): Patrick Lin/ Director *By signing this letter, the client declares and agrees that the service provided by Approve-IT, Inc. will only be applicable for the module models described above. The client also declares and accepts that the service won’t be applicable in any way to any host devices that could contain the modules for which the service has been contracted.

AzureWave Technologies, Inc. 8F., No.94, Baozhong Rd. , Xindian Dist., New Taipei City , Taiwan 231 Power of Attorney Date: 2025/7/24 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Hsinchu Laboratory Address : No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. Name : Leo Huang Job Title : Manager e-mail : [email protected] I am therefore responsible for the contents of the application. FCC ID: TLZ-CU668 Respectfully, Applicant’s company name : AzureWave Technologies, Inc. Applicant’s company address : 8F., No.94, Baozhong Rd. , Xindian Dist., New Taipei City , Taiwan 231 Signature : Name and Job Title : Patrick Lin / Director E-Mail : [email protected] Tel : 02-55995599 Fax : 02-66289666

Module Approval Request Letter Date: 2025/11/19 Subject: Module Approval FCC ID: TLZ-CU668 To Whom It May Concern: We, Sporton International Inc. Hsinchu Laboratory, are authorized by AzureWave Technologies, Inc. to have their state-of-the-art device approved under module approval authorization. The application of this module is specified to mobile host equipment. The requirements regulated in CFR47 Part 15.212 have been fulfilled and clearly explained below. 1. The requirement of RF shielding: The shielding of the radio portion can be demonstrated in exhibition External Photo. 2. The requirement of buffered inputs: Buffered data inputs stage has been integrated in chip CYW55913. 3. The requirement of power supply regulation: The part number of the power regulator is CYW55913. 4. The requirements of section 15.203 and 15.204(C): The requirements of antenna connector and spurious emission have been fulfilled. Please reference the exhibition Test Report. 5. The requirement of stand-alone test configuration: Please reference exhibition Test Configuration Photo for the stand-alone test configuration. 6. The requirement of labeling: The instruction on the labeling rule of the end product has been stated in the users manual of this module. Please also see the exhibition Label Sample. 7. The requirement of compliance on specific rule or operating requirements: The required FCC rule has been fulfilled and all the instructions for maintaining compliance has been clearly stated in the Users Manual. 8. The requirement of RF exposure: Please refer exhibition RF Exposure for the compliance of MPE RF exposure rule. Please do not hesitate to contact me for any questions of this request letter. Thank you. Company name : Sporton International Inc. Hsinchu Laboratory Company Address : No.8, Ln. 724, Bo’ai St., Zhubei City, Hsinchu County 302010, Taiwan (R.O.C.) Signature : Name : Leo Huang Job Title : Manager

AzureWave Technologies, Inc. 8F., No.94, Baozhong Rd. , Xindian Dist., New Taipei City , Taiwan 231 Confidential Letter Date: 2025/7/24 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia MD 21046 USA Subject: Request for Confidentiality FCC ID：TLZ-CU668 To Whom It May Concern: Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below: ● Block Diagrams ● Schematics ● Operational Description ● Part List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Short Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby respectfully request short-term confidential treatment of information accompanying this application as outlined below until 90 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: ● External Photos ● Internal Photos ● Test Setup photos ● Users Manuals Respectfully, Applicant’s company name : AzureWave Technologies, Inc. Applicant’s company address : 8F., No.94, Baozhong Rd. , Xindian Dist., New Taipei City , Taiwan 231 Signature : Name and Job Title : Patrick Lin / Director E-Mail : [email protected] Tel : 02-55995599 Fax : 02-66289666

Confidential 1 AW-CU668 AzureWave Model:AW-CU668 FCC ID: TLZ-CU668 Confidential 2 AW-CU680 AzureWave Model:AW-CU680 FCC ID: TLZ-CU668 Confidential 3 AW-CU712 AzureWave Model:AW-CU712 FCC ID: TLZ-CU668

RADIO EXPOSURE TEST REPORT Report No. : FA570129 TEL : 886-3-656-9065 Page Number : 2 of 8 FAX : 886-3-656-9085 Issued Date : Nov. 19, 2025 Report Template No.: CB-A1_1 Ver1.1 Report Version : 01 Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ............................................................................................................................. 5 1.1 EUT General Information ....................................................................................................................... 5 1.2 Antenna Information ............................................................................................................................... 5 1.3 Table for Multiple Listing ........................................................................................................................ 6 1.4 Accessories ............................................................................................................................................ 6 1.5 Testing Location ..................................................................................................................................... 6 2 Maximum Permissible Exposure ........................................................................................................ 7 2.1 Limit of Maximum Permissible Exposure ............................................................................................... 7 2.2 MPE Calculation Method ........................................................................................................................ 7 2.3 Calculated Result and Limit .................................................................................................................... 8 Photographs of EUT v01 RADIO EXPOSURE TEST REPORT Report No. : FA570129 TEL : 886-3-656-9065 Page Number : 3 of 8 FAX : 886-3-656-9085 Issued Date : Nov. 19, 2025 Report Template No.: CB-A1_1 Ver1.1 Report Version : 01 History of this test report Report No. Version Description Issued Date FA570129 01 Initial issue of report Nov. 19, 2025 RADIO EXPOSURE TEST REPORT Report No. : FA570129 TEL : 886-3-656-9065 Page Number : 4 of 8 FAX : 886-3-656-9085 Issued Date : Nov. 19, 2025 Report Template No.: CB-A1_1 Ver1.1 Report Version : 01 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 2 - Exposure evaluation PA SS - Conformity Assessment Condition: 1. The test results (PASS/FAIL) with all measurement uncertainty excluded are presented against the regulation limits or in accordance with the requirements stipulated by the applicant/manufacturer who shall bear all the risks of non-compliance that may potentially occur if measurement uncertainty is taken into account. 2. The measurement uncertainty please refer to each test result in the chapter "Measurement Uncertainty". Disclaimer: The product specifications of the EUT presented in the test report that may affect the test assessments are declared by the manufacturer who shall take full responsibility for the authenticity. Reviewed by: Sam Chen Report Producer: Sophia Shiung RADIO EXPOSURE TEST REPORT Report No. : FA570129 TEL : 886-3-656-9065 Page Number : 5 of 8 FAX : 886-3-656-9085 Issued Date : Nov. 19, 2025 Report Template No.: CB-A1_1 Ver1.1 Report Version : 01 1 General Description 1.1 EUT General Information RF General Information Evaluation Mode Frequency Range (MHz) Operating Frequency (MHz) Modulation Type 2.4GHz WLAN 2400-2483.5 2412-2462 802.11b: DSSS (DBPSK, DQPSK, CCK) 802.11g/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) VHT: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM) 802.11ax: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) 5GHz WLAN 5150-5250 5250-5350 5470-5725 5725-5850 5180-5240 5260-5320 5500-5720 5745-5825 802.11a/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) 802.11ac: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM) 802.11ax: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) 6GHz WLAN 5925-7125 5955-7115 802.11ax: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) Bluetooth 2400-2483.5 2402-2480 LE: GFSK 1.2 Antenna Information Ant. Port Brand Model Name Antenna Type Connector Gain (dBi) WLAN 2.4GHz / Bluetooth WLAN 5GHz / 6GHz 1 1 ARISTOTLE RFA‐27‐JP326MHF4C198 PIFA I-Pex 3.5 5 2 - RFA‐27‐JP326-C198 Note 1: The Ant. 1 and Ant. 2 are identical in type and gain, and the Ant. 1 was selected as representative antenna for the test and its data was recorded in this report. Note 2: The above information was declared by manufacturer. Note 3: For WLAN 2.4GHz function: For IEEE 802.11 b/g/n/VHT/ax (1TX/1RX): Only Port 1 can be used as transmitting/receiving antenna. For WLAN 5GHz function: For IEEE 802.11 a/n/ac/ax (1TX/1RX): Only Port 1 can be used as transmitting/receiving antenna. For WLAN 6GHz function: For IEEE 802.11 ax (1TX/1RX): Only Port 1 can be used as transmitting/receiving antenna. For Bluetooth function (1TX/1RX): Only Port 1 can be used as transmitting/receiving antenna. RADIO EXPOSURE TEST REPORT Report No. : FA570129 TEL : 886-3-656-9065 Page Number : 6 of 8 FAX : 886-3-656-9085 Issued Date : Nov. 19, 2025 Report Template No.: CB-A1_1 Ver1.1 Report Version : 01 1.3 Table for Multiple Listing Model Name Chipset WLAN 2.4GHz WLAN 5GHz WLAN 6GHz Bluetooth AW-CU668 CYW55913 ✓ ✓ ✓ ✓ AW-CU680 CYW55912 ✓ ✓ ✕ ✓ AW-CU712 CYW55911 ✓ ✕ ✕ ✓ Note 1: The EUT has three model names that are identical in all aspects except for the supported wireless functionalities. The wireless differences are implemented solely through software configuration, with the firmware being the same and requiring no hardware changes. Note 2: From the models above, model "AW-CU668" was selected to test. Note 3: The EUT can only function WLAN 2.4GHz, 5GHz, …

Text truncated - open the document above for the full version.

RADIO TEST REPORT Report No. : FR570129AA TEL : 886-3-656-9065 Page Number : 2 of 27 FAX : 886-3-656-9085 Issued Date : Nov. 19, 2025 Report Template No.: CB-A10_10 Ver1.3 Report Version : 01 Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ............................................................................................................................. 5 1.1 Information .............................................................................................................................................. 5 1.2 Applicable Standards ............................................................................................................................. 7 1.3 Testing Location Information .................................................................................................................. 7 1.4 Measurement Uncertainty ...................................................................................................................... 8 2 Test Configuration of EUT ................................................................................................................... 9 2.1 Test Channel Mode ................................................................................................................................ 9 2.2 The Worst Case Measurement Configuration ........................................................................................ 9 2.3 EUT Operation during Test .................................................................................................................. 10 2.4 Accessories .......................................................................................................................................... 10 2.5 Support Equipment ............................................................................................................................... 11 2.6 Test Setup Diagram ............................................................................................................................. 12 3 Transmitter Test Result ..................................................................................................................... 14 3.1 AC Power-line Conducted Emissions .................................................................................................. 14 3.2 DTS Bandwidth..................................................................................................................................... 16 3.3 Maximum Conducted Output Power .................................................................................................... 17 3.4 Power Spectral Density ........................................................................................................................ 19 3.5 Emissions in Non-restricted Frequency Bands .................................................................................... 21 3.6 Emissions in Restricted Frequency Bands ........................................................................................... 22 4 Test Equipment and Calibration Data .............................................................................................. 26 Appendix A. Test Results of AC Power-line Conducted Emissions Appendix B. Test Results of DTS Bandwidth Appendix C. Test Results of Maximum Conducted Output Power Appendix D. Test Results of Power Spectral Density Appendix E. Test Results of Emissions in Non-restricted Frequency Bands Appendix F. Test Results of Emissions in Restricted Frequency Bands Appendix G. Test Photos Photographs of EUT v01 RADIO TEST REPORT Report No. : FR570129AA TEL : 886-3-656-9065 Page Number : 3 of 27 FAX : 886-3-656-9085 Issued Date : Nov. 19, 2025 Report Template No.: CB-A10_10 Ver1.3 Report Version : 01 History of this test report Report No. Version Description Issued Date FR570129AA 01 Initial issue of report Nov. 19, 2025 RADIO TEST REPORT Report No. : FR570129AA TEL : 886-3-656-9065 Page Number : 4 of 27 FAX : 886-3-656-9085 Issued Date : Nov. 19, 2025 Report Template No.: CB-A10_10 Ver1.3 Report Version : 01 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 1.1.2 15.203 Antenna Requirement PA SS - 3.1 15.207 AC Power-line Conducted Emissions PA SS - 3.2 15.247(a) DTS Bandwidth PA SS - 3.3 15.247(b) Maximum Conducted Output Power PA SS - 3.4 15.247(e) Power Spectral Density PA SS - 3.5 15.247(d) Emissions in Non-restricted Frequency Bands PA SS - 3.6 15.247(d) Emissions in Restricted Frequency Bands PA SS - Conformity Assessment Condition: 1. The test results (PASS/FAIL) with all measurement uncertainty excluded are presented against the regulation limits or in accordance with the requirements stipulated by the applicant/manufacturer who shall bear all the risks of non-compliance that may potentially occur if measurement uncertainty is taken into account. 2. The measurement uncertainty please refer to each test result in the chapter "Measurement Uncertainty". Disclaimer: The product specifications of the EUT presented in the test report that may affect the test assessments are declared by the manufacturer who shall take full responsibility for the authenticity. Reviewed by: Sam Chen Report Producer: Sophia Shiung RADIO TEST REPORT Report No. : FR570129AA TEL : 886-3-656-9065 Page Number : 5 of 27 FAX : 886-3-656-9085 Issued Date : Nov. 19, 2025 Report Template No.: CB-A10_10 Ver1.3 Report Version : 01 1 General Description 1.1 Information 1.1.1 RF General Information Frequency Range (MHz) IEEE Std. 802.11 Ch. Frequency (MHz) Channel Number 2400-2483.5 b, g, n (HT20), VHT20, ax (HEW20) 2412-2462 1- 11 [11 ] Band Mode BWch (MHz) Nant 2.4-2.4835GHz 802.11b …

Text truncated - open the document above for the full version.

RADIO TEST REPORT Report No. : FR570129AD TEL : 886-3-656-9065 Page Number : 2 of 28 FAX : 886-3-656-9085 Issued Date : Nov. 19, 2025 Report Template No.: CB-A10_6 Ver1.3 Report Version : 01 Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ............................................................................................................................. 5 1.1 Information .............................................................................................................................................. 5 1.2 Applicable Standards ............................................................................................................................. 7 1.3 Testing Location Information .................................................................................................................. 7 1.4 Measurement Uncertainty ...................................................................................................................... 8 2 Test Configuration of EUT ................................................................................................................... 9 2.1 Test Channel Mode ................................................................................................................................ 9 2.2 The Worst Case Measurement Configuration ...................................................................................... 10 2.3 EUT Operation during Test .................................................................................................................. 11 2.4 Accessories .......................................................................................................................................... 11 2.5 Support Equipment ............................................................................................................................... 11 2.6 Test Setup Diagram ............................................................................................................................. 12 3 Transmitter Test Result ..................................................................................................................... 15 3.1 AC Power-line Conducted Emissions .................................................................................................. 15 3.2 DTS Bandwidth..................................................................................................................................... 17 3.3 Maximum Conducted Output Power .................................................................................................... 18 3.4 Power Spectral Density ........................................................................................................................ 20 3.5 Emissions in Non-restricted Frequency Bands .................................................................................... 22 3.6 Emissions in Restricted Frequency Bands ........................................................................................... 23 4 Test Equipment and Calibration Data .............................................................................................. 27 Appendix A. Test Results of AC Power-line Conducted Emissions Appendix B. Test Results of DTS Bandwidth Appendix C. Test Results of Maximum Conducted Output Power Appendix D. Test Results of Power Spectral Density Appendix E. Test Results of Emissions in Non-restricted Frequency Bands Appendix F. Test Results of Emissions in Restricted Frequency Bands Appendix G. Test Photos Photographs of EUT v01 RADIO TEST REPORT Report No. : FR570129AD TEL : 886-3-656-9065 Page Number : 3 of 28 FAX : 886-3-656-9085 Issued Date : Nov. 19, 2025 Report Template No.: CB-A10_6 Ver1.3 Report Version : 01 History of this test report Report No. Version Description Issued Date FR570129AD 01 Initial issue of report Nov. 19, 2025 RADIO TEST REPORT Report No. : FR570129AD TEL : 886-3-656-9065 Page Number : 4 of 28 FAX : 886-3-656-9085 Issued Date : Nov. 19, 2025 Report Template No.: CB-A10_6 Ver1.3 Report Version : 01 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 1.1.2 15.203 Antenna Requirement PA SS - 3.1 15.207 AC Power-line Conducted Emissions PA SS - 3.2 15.247(a) DTS Bandwidth PA SS - 3.3 15.247(b) Maximum Conducted Output Power PA SS - 3.4 15.247(e) Power Spectral Density PA SS - 3.5 15.247(d) Emissions in Non-restricted Frequency Bands PA SS - 3.6 15.247(d) Emissions in Restricted Frequency Bands PA SS - Conformity Assessment Condition: 1. The test results (PASS/FAIL) with all measurement uncertainty excluded are presented against the regulation limits or in accordance with the requirements stipulated by the applicant/manufacturer who shall bear all the risks of non-compliance that may potentially occur if measurement uncertainty is taken into account. 2. The measurement uncertainty please refer to each test result in the chapter "Measurement Uncertainty". Disclaimer: The product specifications of the EUT presented in the test report that may affect the test assessments are declared by the manufacturer who shall take full responsibility for the authenticity. Reviewed by: Sam Chen Report Producer: Sophia Shiung RADIO TEST REPORT Report No. : FR570129AD TEL : 886-3-656-9065 Page Number : 5 of 28 FAX : 886-3-656-9085 Issued Date : Nov. 19, 2025 Report Template No.: CB-A10_6 Ver1.3 Report Version : 01 1 General Description 1.1 Information 1.1.1 RF General Information Frequency Range (MHz) Bluetooth Mode Ch. Frequency (MHz) Channel Number 2400-2483.5 LE 2402-2480 0-39 [40] Band Mode BWch (MHz) Nant 2.4-2.4835GHz BT-LE(1Mbps) 1.0 1TX 2.4-2.4835GHz BT-LE(500Kb/s…

Text truncated - open the document above for the full version.

8F, No.63, Juguang Rd, Zhonghe Dist, New Taipei City 235, Taiwan, R.O.C. Tel : +886-2-2225-8209 Fax: +886-2-2225-7523 www.aristotle.com.tw Antenna type is PIFA Wi‐Fi 6 Antenna RFA‐27‐JP326‐C198 Specifications Frequency 2400‐2500 MHz 5150‐7125 MHz Peak gain 3.5 dBi 5 dBi Average gain ‐2.04 dBi ‐2.4 dBi VSWR 2.0 : 1 Max. 2.0 : 1 Max. Polarization Linear, vertical Impedance 50 Ω Dimensions 30.2x16mm Antenna Material FR4 Connector IPEX Cable Ø1.13 L:300mm Environment & Mechanical Characteristics Temperature ‐ 10°C to +55°C Humidity 95％ @ 25°C VSWR 8F, No.63, Juguang Rd, Zhonghe Dist, New Taipei City 235, Taiwan, R.O.C. Tel : +886-2-2225-8209 Fax: +886-2-2225-7523 www.aristotle.com.tw Radiation Pattern 2400 MHz 2450 MHz 2500 MHz XY Plane (+X = 0¢…

Text truncated - open the document above for the full version.