TS5-6050M-OM200Wireless Tracking Device

SENDUM WIRELESS, CORP. Table of Contents 1 Purpose.....................................................................................................3 2 Introduction..............................................................................................3 2.1 What is a OM200................................................................................................3 2.2 How does a OM200 work...................................................................................3 3 Getting Started.........................................................................................3 3.1 Battery Tips.........................................................................................................3 3.2 Installing the Battery...........................................................................................4 3.3 Removing the Battery..........................................................................................4 3.4 Charging the Battery...........................................................................................4 3.4.1 Charging using the OM200 Device............................................................4 4 Provisioning Your Device........................................................................4 5 OM200 Command Set..............................................................................5 6 Locating Your OM200.............................................................................6 6.1 Frequent Tracking..............................................................................................6 6.2 Periodic Tracking...............................................................................................7 6.3 Fast Tracking......................................................................................................7 7 Using the Diagnostic Tool.......................................................................7 8 Troubleshooting.......................................................................................8 9 Exposure to Radio Frequency (RF) Signals.............................................9 10 Important Safety and Legal Information..............................................9 10.1 RF Energy Interference/Compatibility.............................................................10 SENDUM WIRELESS, CORP. 1 Purpose The purpose of this guide is to describe the basic features of the OM200. 2 Introduction 2.1 What is a OM200 ÿ The OM200 is a wireless tracking device which operates on the CDMA network using assisted GPS for location. ÿ It is worn by offenders or minimum security prisoners on the leg so that they can be tracked by law enforcement. 2.2 How does a OM200 work ÿ It establishes a data connection through either the cellular or the PCS band similar to a mobile phone. ÿ A user can send a SMS message through an internet connection or a mobile phone to the device by calling its phone number. The device gets its location and send it back to the user via the CDMA network. 3 Getting Started 3.1 Battery Tips Battery life depends on the network, signal strength, temperature, features, and accessories you use. ÿ Always use Sendum Original batteries and battery chargers. The warranty does not cover damage caused by non-Sendum batteries and/or chargers. ÿ New batteries or batteries stored for a long time may take more time to charge. ÿ When charging your battery, keep it near room temperature. ÿ When storing your battery, keep it uncharged in a cool, dark, dry place, such as a refrigerator. ÿ Never expose batteries to temperatures below -10°C (14°F) or above 45°C (113°F). Always take your device with you when you leave your vehicle. ÿ It is normal for batteries to gradually wear down and require longer charging times. If you notice a change in your battery life, it is probably time to purchase a new battery. Contact your local recycling center for proper battery disposal. Warning: Never dispose of batteries in a fire because they may explode. Before using your device, please read the battery safety information in the Safety and General Information section included in this guide. SENDUM WIRELESS, CORP. 3.2 Installing the Battery The battery is inaccessible by users 3.3 Removing the Battery The battery is inaccessible by users 3.4 Charging the Battery New batteries are shipped partially charged. Before you can use your device, install and charge the battery as described below. Some batteries perform best after several full charge/discharge cycles. 3.4.1 Charging using the OM200 Device Simply attached the Sendum charger into the device and plug the AC adapter to the AC outlet. 4 Provisioning Your Device ÿ Connect your device using the sendum USB cable. If problem communicating with the device. Use the following documents for troubleshooting: DEX00003 (DOC QUALCOMM USB DRIVER INSTALLATION).doc ÿ Open the Sendum Provisioning Tool. Should look like: SENDUM WIRELESS, CORP. ÿ Select the com port that the device is communicating, then press “Connect”. The ESN will be shown. ÿ If the device is already provisioned, the “Read” button is used to check. ÿ Now all provisioning parameters can be entered into the appropriate boxes. ÿ Press “Write” to load into the device. 5 OM200 Command Set The OM200 supports the following commands. There are sent to the device using SMS messages: //BREW:0x12345678:PSW2,PROVISION,PDE,<ip_address>:<port> Sets the PDE address used by the device. In control plane architectures, this is the address of the Control Plane Server. In user plane architectures, this is the address of the actual PDE. //BREW:0x12345678:PSW2,PROVISION,APP,<ip_address>:<port> Sets the APP address of used by the device. All messages from the device are sent to this IP address. SENDUM WIRELESS, CORP. //BREW:0x12345678:PSW2,COMMAND,STATUS Causes the device to send a status report. //BREW:0x12345678:PSW2,COMMAND,LOCATE Causes the device to locate itself and send a location report. //BREW:0x12345678:PSW2,REPORT,STATUS,…

Text truncated - open the document above for the full version.

4500 Beedie Street, Burnaby BC, Canada, V5J 5L2 www.sendum.com Main: 604.438.9741 Fax: 604.437.5726 This document contains information which is proprietary and confidential to Sendum Wireless, Corp. Disclosure to persons other than the officers, employees, agents, or subcontractors of the Company or licensee of this document without the prior written permission of Sendum Wireless, Corp. is strictly prohibited. Date: Nov. 18/05 Sendum Wireless Corp. 4500 Beedie Street Burnaby, BC, V5J 5L2 Canada Re: Request of Confidentiality (FCC ID: TS5-6050M-OM200) Pursuant to Sections 0.457(d)(I)(ii) and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying as outlined below: Schematics, Parts List, Operating Description, Block Diagrams The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(I)(ii), disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely, Kerry Zoehner VP of Engineering Sendum Wireless Corp. . Sendum

© 2005 RF Exposure Lab, LLC This report shall not be reproduced except in full without the written approval of RF Exposure Lab, LLC. 2867 Progress Place, Suite 4D • Escondido, CA 92029 • U.S.A. TEL (760) 737-3131 • FAX (760) 737-9131 http://www.rfexposurelab.com CERTIFICATE OF COMPLIANCE SAR EVALUATION Sendum Corporation Dates of Test: November 23, 2005 4500 Beedie Street Test Report Number: SAR.20051101 Burnaby, BC V5J 5L2, Canada Revision C This wireless mobile and/or portable device has been shown to be compliant for localized specific absorption rate (SAR) for uncontrolled environment/general exposure limits specified in ANSI/IEEE Std. C95.1-1999 and had been tested in accordance with the measurement procedures specified in IEEE 1528-2003, OET Bulletin 65 Supp. C, RSS-102 and Safety Code 6 (See test report). I attest to the accuracy of the data. All measurements were performed by myself or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. RF Exposure Lab, LLC certifies that no party to this application has been denied FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Jay M. Moulton Vice President Certificate # 2387.01 FCC ID: TS5-6050M-OM200 IC Certificate: 6234A-OM200 Model(s): OM200 Test Sample: Pre-Production Unit same as Production Serial No.: 3A137985 Equipment Type: Dual Band Wireless Tracking Device Classification: Portable Transmitter Next to Body TX Frequency Range: 824.7 – 848.31 MHz, 1851.25 – 1908.75 MHz Frequency Tolerance: ± 120 kHz Maximum RF Output: 24 dBm Conducted Signal Modulation: CDMA Antenna Type (Length): Internal (PCB), P/N CCI-01 Battery: P/N fba00005 Battery Pack Application Type: Certification FCC Rule Parts: Part 22H, Part 24E IC Specification: RSS-129, RSS-133 FCC ID: TS5-6050M-OM200 © 2005 RF Exposure Lab, LLC Page 2 of 122 This report shall not be reproduced except in full without the written approval of RF Exposure Lab, LLC. Table of Contents 1. Introduction ...........................................................................................................................3 SAR Definition [5]......................................................................................................................3 2. SAR Measurement Setup .....................................................................................................4 Robotic System .........................................................................................................................4 System Hardware .....................................................................................................................4 System Description ...................................................................................................................4 E-Field Probe ALS-E-020 ......................................................................................................... 5 3. Robot Specifications .............................................................................................................7 4. Probe and Dipole Calibration ................................................................................................8 5. Phantom & Simulating Tissue Specifications........................................................................9 SAM Phantom ...........................................................................................................................9 Brain & Muscle Simulating Mixture Characterization ................................................................9 Device Holder ...........................................................................................................................9 6. Definition of Reference Points.............................................................................................10 Ear Reference Point................................................................................................................10 Device Reference Points ........................................................................................................10 7. Test Configuration Positions ...............................................................................................11 Positioning for Cheek/Touch [5] ..............................................................................................11 Positioning for Ear / 15 ̊ Tilt [5]................................................................................................12 Body Worn Configurations ......................................................................................................13 8. ANSI/IEEE C95.1 – 1999 RF Exposure Limits [2]...............................................................14 Uncontrolled Environment.......................................................................................................14 Controlled Environment .......................................................................................................... 14 9. Measurement Uncertainty ...................................................................................................15 10. System Validation ........................................................................................................... 16 Tissue Verification...................................................................................................................16 Test System Verification ......................................................................................................... 16 11. SAR Test Data Summary ................................................................................................17 Procedures Used To Establish Test Signal.............................................................................17 Device Test Condition ..........................................................…

Text truncated - open the document above for the full version.

Nemko USA, Inc. Phone (858) 755-5525 Fax (858) 452-1810 11696 Sorrento Valley Rd., Suite F San Diego, CA 92121-1024 Test Report: 2005 110898-FCC2 Applicant: Sendum Wireless Corporation 4500 Beedie Street Burnaby, BC Canada V5J 5L2 Phone: 604 438 6451 Fax: 604 437 5726 Apparatus: OM200 FCC ID: TS5-6050M-OM200 In Accordance With: FCC Part 22, Subpart H Public Mobile Services RSS-129, Issue 2 800MHz Dual-Mode CDMA Cellular Telephones FCC Part 24, Subpart E RSS-133, Issue 2, Rev.1 2GHz Personal Communications Services Tested By: Nemko USA Project Number: 25-898-SEN Date: Nov. 17, 2005 Total Number of Pages: 50 Nemko USA REPORT SUMMARY Report Number: 2005 110898-FCC2 FCC ID:TS5-6050M-OM200 Specification: FCC Part 22 & 24 Page 2 of 50 Report Summary These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 22. Conducted measurements were performed in accordance with ANSI TIA-603-B-2002. Radiated tests were conducted is accordance with ANSI C63.4-2003. Radiated emissions are made on an open area test site. A description of the test facility is on file with the FCC. The assessment summary is as follows: Apparatus Assessed: OM200 Specification: FCC Part 22 Public Mobile Services FCC Part 24, Subpart E RSS-129, Issue 2 RSS-133, Issue 2 Compliance Status: Complies Exclusions: None Non-compliances: None Report Release History: REVISION DATE COMMENTS - 11-10-05 Prepared By: A. Laudani - Initial Release: Chip Fleury Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. Nemko USA. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. Nemko USA REPORT SUMMARY Report Number: 2005 110898-FCC2 FCC ID:TS5-6050M-OM200 Specification: FCC Part 22 & 24 Page 3 of 50 TABLE OF CONTENTS Report Summary........................................................................................................................................2 Section 1: Equipment Under Test.............................................................................................................4 1.1 Product Identification................................................................................................................................4 1.2 Samples Submitted for Assessment...........................................................................................................5 1.3 Theory of Operation..................................................................................................................................5 1.4 Technical Specifications of the EUT.........................................................................................................6 1.5 Block Diagram of the EUT........................................................................................................................6 Section 2: Test Conditions.........................................................................................................................7 2.1 Specifications.............................................................................................................................................7 2.2 Deviations From Laboratory Test Procedures...........................................................................................7 2.3 Test Environment.......................................................................................................................................7 2.4 Test Equipment..........................................................................................................................................7 Section 3: Observations..............................................................................................................................8 3.1 Modifications Performed During Assessment...........................................................................................8 3.2 Record Of Technical Judgements..............................................................................................................8 3.3 EUT Parameters Affecting Compliance....................................................................................................8 3.4 Test Deleted...............................................................................................................................................8 3.5 Additional Observations............................................................................................................................8 Section 4: Results Summary......................................................................................................................9 Appendix A: Test Results........................................................................................................................10 Frequency Stability...............................................................................................................................................10 Output Power........................................................................................................................................................12 Part 22 Low Frequency Output Power..........................................................................................................17 Mid Frequency Output Power.........................................................................................................................18 High Frequency Output Power…

Text truncated - open the document above for the full version.