TS5-6055M-GT300GLOBAL ASSET TRACKING DEVICE

SENDUM WIRELESS, CORP. Table of Contents 1 Purpose ................................................................................................. 3 2 Introduction........................................................................................... 3 2.1 What is a GT300 ..............................................................................................3 2.2 How does a GT300 work..................................................................................3 3 Getting Started ...................................................................................... 3 3.1 Battery Tips .....................................................................................................3 3.2 Installing the Battery........................................................................................4 3.3 Removing the Battery .......................................................................................4 3.4 Charging the Battery........................................................................................4 3.4.1 Charging using the GT300 Device................................................................4 4 Provisioning Your Device ..................................................................... 4 5 GT300 Command Set............................................................................ 5 6 Locating Your GT300 ........................................................................... 6 6.1 Frequent Tracking ...........................................................................................6 6.2 Periodic Tracking ............................................................................................6 6.3 Fast Tracking...................................................................................................7 7 Using the Diagnostic Tool..................................................................... 7 8 Troubleshooting .................................................................................... 8 9 Important Safety and Legal Information................................................ 9 9.1 RF Energy Interference/Compatibility..............................................................9 SENDUM WIRELESS, CORP. 1 Purpose The purpose of this guide is to describe the basic features of the GT300. 2 Introduction 2.1 What is a GT300  The GT300 is a wireless tracking device which operates on the CDMA network using assisted GPS for location.  It is used for tracking valuable assets (such as tools, machinery, etc) in construction sites. 2.2 How does a GT300 work  It establishes a data connection through either the cellular or the PCS band similar to a mobile phone.  A user can send a SMS message through an internet connection or a mobile phone to the device by calling its phone number. The device gets its location and send it back to the user via the CDMA network. 3 Getting Started 3.1 Battery Tips Battery life depends on the network, signal strength, temperature, features, and accessories you use.  Always use Sendum Original batteries and battery chargers. The warranty does not cover damage caused by non-Sendum batteries and/or chargers.  New batteries or batteries stored for a long time may take more time to charge.  When charging your battery, keep it near room temperature.  When storing your battery, keep it uncharged in a cool, dark, dry place, such as a refrigerator.  Never expose batteries to temperatures below -10°C (14°F) or above 45°C (113°F). Always take your device with you when you leave your vehicle.  It is normal for batteries to gradually wear down and require longer charging times. If you notice a change in your battery life, it is probably time to purchase a new battery. Contact your local recycling center for proper battery disposal. Warning: Never dispose of batteries in a fire because they may explode. Before using your device, please read the battery safety information in the Safety and General Information section included in this guide. SENDUM WIRELESS, CORP. 3.2 Installing the Battery The battery is inaccessible by users 3.3 Removing the Battery The battery is inaccessible by users 3.4 Charging the Battery New batteries are shipped partially charged. Before you can use your device, install and charge the battery as described below. Some batteries perform best after several full charge/discharge cycles . 3.4.1 Charging using the GT300 Device Simply attached the Sendum charger into the device and plug the AC adapter to the AC outlet. 4 Provisioning Your Device  Connect your device using the sendum USB cable. If problem communicating with the device. Use the following documents for troubleshooting: DEX00003 (DOC QUALCOMM USB D  Open the Sendum Provisioning Tool. Should look like: SENDUM WIRELESS, CORP.  Select the com port that the device is communicating, then press “Connect”. The ESN will be shown.  If the device is already provisioned, the “Read” button is used to check.  Now all provisioning parameters can be entered into the appropriate boxes.  Press “Write” to load into the device. 5 GT300 Command Set The GT300 supports the following commands. There are sent to the device using SMS messages: //BREW:0x12345678:PSW2,PROVISION,PDE,<ip_address>:<port> Sets the PDE address used by the device. In control plane architectures, this is the address of the Control Plane Server. In user plane architectures, this is the address of the actual PDE. //BREW:0x12345678:PSW2,PROVISION,APP,<ip_address>:<port> Sets the APP address of used by the device. All messages from the device are sent to this IP address. //BREW:0x12345678:PSW2,COMMAND,STATUS Causes the device to send a status report. //BREW:0x12345678:PSW2,COMMAND,LOCATE Causes the device to locate itself and send a location report. //BREW:0x12345678:PSW2,REPORT,STATUS,<interval> Causes the device to send a status report every <interval> seconds. //BREW:0x12345678:PSW2,REPORT,LOCATION,<interval> Causes the device to send a location report eve…

Text truncated - open the document above for the full version.

DATE: Aug. 22, 2012 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: Some of the material included in this application contains trade secrets and proprietary information not customarily released to the public. Because public disclosure of the material might be harmful to the applicant and provide unjustified benefits to its competitors, it is requested that the following be withheld from public disclosure: Exhibit Type: Block Diagram (File Name:GT 300 Block Diagram Revised - CONFIDENTIAL.pdf) E xhi bit Type: Schematic Diagrams (File Name:G T300 Schematic Diagrams - CONFIDENTIAL.pdf) Exhibit Type: Circuit Description (File Name: GT300 Circuit Description - CONFIDENTIAL.pdf) Exhibit Type: Parts List (File Name: GT300 Parts List - CONFIDENTIAL.pdf) Exhibit Type: Tune-up Procedure (File Name :G T300 Calibration Procedure - C ONFIDENTIAL.pdf) Trade secrets and proprietary information can be held confidential. Therefore, we wish to invoke the act under the provisions of 47CFR, Sections 0.457(d) and 0.459. Please contact the undersigned if you have any questions or need any further information. Sincerely, ___________________ Henry Seto Senior RF Engineer/Manager Sendum Wireless Corp. Sendum

Celltech Labs Inc. 21-364 Lougheed Road, Kelowna, B.C. Canada V1X 7R8 Tel. 250-765-7650  Fax. 250-765-4645  e-mail: [email protected] www.celltechlabs.com August 24, 2012 Timco Engineering, Inc. Telecommunication Certification Body 849 NW State Road 45 Newberry, FL 32669 SUBJECT: SENDUM WIRELESS CORPORATION FCC ID: TS5-6055M-GT300 FCC Part 22, Subpart H FCC Part 24, Subpart E PCB - PCS Licensed Transmitter On behalf of Sendum Wireless Corporation is an application for FCC Rule Part 22(H) and 24(E) Certification of the Sendum GT300 Dual-Band CDMA Global Asset Tracking Device. Submitted within this application is the TCB Form 731, applicant’s agency authorization letter, applicant’s long- term confidentiality request, FCC Part 22H/24E RF measurement report and test setup photographs, MPE RF exposure data summary, internal and external device photographs, block diagram (confidential), schematic diagrams (confidential), circuit description (confidential), tune-up procedure (confidential), parts list (confidential) and the user manual. If you have any questions or comments concerning the above, please contact the undersigned. Sincerely, Jonathan Hughes Project Manager Celltech Labs Inc. cc: Sendum Wireless Corporation

DATE: Aug. 22, 2012 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: We, Sendum Wireless Corporation, hereby authorize Jonathan Hughes of Celltech Labs Inc. to act on our behalf in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by Jonathan Hughes of Celltech Labs Inc. on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S. C. 853(a). Sincerely, ___________________ Henry Seto Senior RF Engineer/Manager Sendum Wireless Corp. Sendum

GT300 Label Location GT300 Label

S= power density P= power input to the antenna G= power gain of the antenna in the direction of 2.00 interest relative to an isotropic radiator R= distance to the center of radiation of the antenna Occupational/Controlled General Population/Uncontrolled Ratio of Time on vs Total TX Time 1.00 850 Band Tx Frequency: 836.52 (MHz) RF Output Power at Antenna Input Terminal: 23.5 (dBm) Source-Based Time -Average Factor: 0.00 (dB) Source-Based Time-Averaged RF Output Power at Antenna Input Terminal: 23.5 (dBm) Antenna gain: -4.00 (dBi) S Limit = 0.56 (mW/cm^2) P = 223.8721 (mW) G = 0.40 (numeric) R = 3.57 (cm) 0.017711664 (mW/cm^2) Prediction of MPE Limit S at 20cm: OET Bulletin 65, Edition 97-01 2 4 R PG S   4 R PG S   Ratio of Time on vs Total TX Time 1.00 1900 Band Tx Frequency: 1880.00 (MHz) RF Output Power at Antenna Input Terminal: 24.0 (dBm) Source-Based Time -Average Factor: 0.00 (dB) Source-Based Time-Averaged RF Output Power at Antenna Input Terminal: 24.0 (dBm) Antenna gain: -4.00 (dBi) S Limit = 1.00 (mW/cm^2) P = 251.1886 (mW) G = 0.40 (numeric) R = 2.82 (cm) 0.019872814 (mW/cm^2) Power Density Limit RF Conducted Output Power Antenna Gain MPE Distance mW/cm 2 dBm dBi cm 0.56 23.5 -4.00 3.57 1.00 24.0 -4.00 2.82 S at 20cm: 1900 Band Power Density at 20 cm mW/cm 2 0.0177120.019873 Band / Mode 850 Band

Test Report Serial No.: 081012TS5-T1188-E24C Issue Date: Aug. 24, 2012 Measurement Date(s): August 14-17, 2012 Rev. No.: Revision 1.0 Testing Standard(s): FCC 47 CFR §2, §22H, §24E IC RSS-132 & RSS-133 Test Lab Registration(s): FCC Accredited Site IC Lab File #: IC 3874A-1 Test Lab Certificate No. 2470.01 Applicant: Sendum Wireless Corp. FCC ID: TS5-6055M-GT300 IC: 6234A-GT300 DUT Model: GT300 DUT Type: Asset Tracking Device (Dual-Band CDMA 1xRTT) 850 / 1900 Bands 2012 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 1 of 36 DECLARATION OF COMPLIANCE RF MEASUREMENT REPORT FCC & IC Name CELLTECH LABS INC. Test Lab Information Address 21-364 Lougheed Road, Kelowna B.C. V1X 7R8 Canada ISO 17025 A2LA Test Lab Certificate No. 2470.01 Test Lab Registration No.(s) IC 3874A-1 Name SENDUM WIRELESS CORPORATION Applicant Information Address 4500 Beedie Street, Burnaby, B.C. V5J 5L2 Canada FCC 47 CFR Part 2 47 CFR Part 22 Subpart H 47 CFR Part 24 Subpart E IC RSS-132 Issue 2 RSS-133 Issue 5 RSS-Gen Issue 3 Standard(s) & Procedure(s) ANSI TIA/EIA-603-C-2004 FCC PCS Licensed Transmitter (PCB) 47 CFR §24(E) 2 GHz Personal Communication Services RSS-133 Issue 5 Device Classification(s) IC 800 MHz Cellular Telephones Employing New Technologies RSS-132 Issue 2 Device Identifier(s) FCC ID: TS5-6055M-GT300 IC: 6234A-GT300 Device Under Test (DUT) Global Asset Tracking Device Device Model(s) GT300 Test Sample Receipt Date August 10, 2012 Date(s) of Measurements August 14-17, 2012 Test Sample Revision No.(s) Hardware R1.0 Firmware R1.43.14 Test Sample Serial No.(s) 0311205280060905674018 (Identical Prototype) Mode(s) of Operation Dual-Band CDMA 1xRTT Emission Designator(s) 1M28F9W Transmit Freq. Range(s) 850 Band 824.70 - 848.31 MHz 1900 Band 1851.25 - 1908.75 MHz Band Mode Frequency Channel dBm Watts Method 824.70 MHz 1013 22.85 0.19 ERP 836.52 MHz 384 22.25 0.17 ERP 850 CDMA 1xRTT 848.31 MHz 777 20.45 0.11 ERP 1851.25 MHz 25 25.8 0.38 EIRP 1880.00 MHz 600 25.1 0.32 EIRP Max. RF Output Power Tested 1900 CDMA 1xRTT 1908.75 MHz 1175 25.1 0.32 EIRP Antenna Type(s) Tested Internal Monopole (-4 dBi) Power Source(s) Tested Li-Poly Rechargeable Smart Battery 3.7 V 2020 mAh Model: GT300 This wireless device has demonstrated compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in FCC 47 CFR Rule Parts 2, 22H, 24E; Industry Canada RSS-132 Issue 2, RSS 133 Issue 5, RSS-Gen Issue 3 and ANSI TIA/EIA-603-C-2004. I attest to the accuracy of data. All measurements were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. The results and statements contained in this report pertain only to the device(s) evaluated. This test report shall not be reproduced partially, or in full, without the prior written approval of Celltech Labs Inc. Test Report Approved By Sean Johnston Lab Manager Celltech Labs Inc. Test Report Serial No.: 081012TS5-T1188-E24C Issue Date: Aug. 24, 2012 Measurement Date(s): August 14-17, 2012 Rev. No.: Revision 1.0 Testing Standard(s): FCC 47 CFR §2, §22H, §24E IC RSS-132 & RSS-133 Test Lab Registration(s): FCC Accredited Site IC Lab File #: IC 3874A-1 Test Lab Certificate No. 2470.01 Applicant: Sendum Wireless Corp. FCC ID: TS5-6055M-GT300 IC: 6234A-GT300 DUT Model: GT300 DUT Type: Asset Tracking Device (Dual-Band CDMA 1xRTT) 850 / 1900 Bands 2012 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 2 of 36 TABLE OF CONTENTS 1.0 SCOPE.......................................................................................................................................................... 5 2.0 REFERENCES .............................................................................................................................................. 5 2.1 Normative References ................................................................................................................................... 5 3.0 TERMS AND DEFINITIONS .......................................................................................................................... 6 4.0 FACILITIES AND ACCREDITATIONS........................................................................................................... 7 5.0 GENERAL INFORMATION............................................................................................................................ 7 5.1 Applicant Information ..................................................................................................................................... 7 5.2 DUT Description ............................................................................................................................................ 7 5.3 Rule Part(s) & Classification(s) ...................................................................................................................... 7 5.4 Mode(s) of Operation Tested......................................................................................................................... 8 5.5 Configuration Description............................................................................................................................... 8 6.0 PASS/FAIL CRITERIA ................................................................................................................................... 8 Appendix A - Occupied Bandwidth................................................................................................................. 9 Appendix B Peak to Average Ratio...................................................................................................…

Text truncated - open the document above for the full version.

Test Report Serial No.: 081012TS5-T1188-E24C Issue Date: Aug. 24, 2012 Measurement Date(s): August 14-17, 2012 Rev. No.: Revision 1.0 Testing Standard(s): FCC 47 CFR §2, §22H, §24E IC RSS-132 & RSS-133 Test Lab Registration(s): FCC Accredited Site IC Lab File #: IC 3874A-1 Test Lab Certificate No. 2470.01 Applicant: Sendum Wireless Corp. FCC ID: TS5-6055M-GT300 IC: 6234A-GT300 DUT Model: GT300 DUT Type: Asset Tracking Device (Dual-Band CDMA 1xRTT) 850 / 1900 Bands 2012 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 25 of 36 D.8 SETUP PHOTOGRAPHS