TTC-BT5122Image ONE Bluetooth headset

OWNER’S MANUAL IMAGE ™ ONE BLUETOOTH ® 1) READ these instructions. 2) KEEP these instructions. 3) HEED all warnings. 4) FOLLOW all instructions. 5) DO NOT use this apparatus near water. 6) CLEAN ONLY with dry cloth. 7) DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) DO NOT install near any heat sources such as radiators, heat registers, stoves, or other appara- tus (including amplifiers) that produce heat. 9) DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) ONLY USE attachments/accessories specified by the manufacturer. 12) UNPLUG this apparatus during lightning storms or when unused for long periods of time. 13) REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14) DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus. 15) To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. 16) The mains plug of the power supply cord shall remain readily operable. 17) DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire. 18) NEVER operate a motor vehicle while listening to or wearing your headphones. Not only dan- gerous, it is illegal in many places. 19) NEVER operate heavy machinery while listening to or wearing your headphones. 20) We don’t recommend you use the headphones while riding a bicycle, running, or walking in heavy traffic areas. IMPORTANT SAFETY INFORMATION WARNING: Except in case of emergency, Klipsch recommends you do not use these headphones or headsets (headphones plus microphone) as aviation communication equipment as they are not engineered for many environmental conditions common in commercial or non-commercial aircraft (including, but not limited to: altitude, temperature, noise conditions, unpressurized aircraft, ect) resulting in possible interference to critical communications WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. WARNING: No user serviceable parts inside. WARNING: No naked flame sources – such as candles – should be placed on the product. WARNING: This product’s operating temperature range is 32-115°F (0-45°C). Avoid exposure to extreme heat or cold. THIS PRODUCT CONTAINS A LITHIUM-POLYMER BATTERY PACK. IF MISUSED OR ABUSED THIS CAN RESULT IN: Smoke / gas hazard Heat hazard Fire hazard Explosion hazard WARNING: Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. WARNING: Risk of leakage. Do not handle leaking or damaged Lithium batteries. WARNING: Do not place batteries in mouth or ingest. Keep out of reach of children and pets. Please dispose of any used batteries properly following any local regulations. Do not incinerate. WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with the same type by service or professional agent. OSHA GUIDELINES FOR NOISE EXPOSURE LIMITS WEEE NOTICE Note: This mark applies only to countries within the European Union (EU) and Norway. This appliance is labeled in accordance with European Directive 2002/96/ EC concerning waste electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling. Sound Pressure LevelRecommended Maximum Exposure Per Day 90dB8 hours 95dB4 hours 100dB2 hours 105dB1 hours 110dB30 minutes 115dB15 minutes 120dB Avoid as damage may occur PLEASE LISTEN RESPONSIBLY The Occupational Safety Health Administration (OSHA) has issued headphone usage recom- mendations for maximum daily exposure and sound pressure levels (measured in decibels (dB)). A decibel is a unit of measure of sound, and decibels increase exponentially as sound gets louder. For example, conversational speech is typically around 60dB, and a rock concert in a stadium is often about 110dB. EU COMPLIANCE INFORMATION Eligible to bear the CE mark; Conforms to European Union Low Voltage Directive 2006/95/ EC; European Union EMC Directive 2004/108/EC; European Union RoHS Directive 2002/95/ EC; European Union WEEE Directive 2002/96/EC; European Union Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Directive 2006/121/EC; European Union Radio and Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. This product contains batteries that are covered under the 2006/66/EC European Directive, which cannot be disposed of with normal household waste. Please follow local regulations. You may obtain a free copy of the Declaration of Conformity by contacting your dealer, dis- tributor, or Klipsch Group, Inc.’s worldwide headquarters. Contact information can be found here: http://www.klipsch.com/Contact-Us WIRELESS TRANSMITTER COMPLIANCE INFORMATION: The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. Le terme «IC:» avant le numéro de certification radio signifie seulement que les spécifica- tions techniques d’Industrie Canada …

Text truncated - open the document above for the full version.

Date (23/07/2012) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Confidentiality Request FCC ID: TTC-BT5122 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, we Fujikon Industrial Co., Ltd. hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics PCB Layout Parts List Block Diagrams Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Dennis Chan Telephone Number: +852 9067 5029 Email: [email protected]

Date (23/07/2012) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Fujikon Industrial Co. Ltd. 16/F Grand Central Plaza, 138 Shatin Rural Committee Rd. Shatin NT HONG KONG hereby authorize TUV-SUD China Shenzhen Branch 6/F, H Hall, Century Craftwork Culture Square, No. 4001 Fuqiang Road, Futian District, Shenzhen 518048 P. R. China Cookies Bu Phone: +86-755-88286998-3257 e-mail: [email protected] to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C 862 because of conviction for possession or distribution of controlled substance. This authorization is application to product: Type of equipment: Bluetooth headset Model name: Image ONE Bluetooth FCC ID: TTC-BT5122 This authorization expires one year from the current date. Sincerely, Company Officer: Dennis Chan Telephone Number: +852 9067 5029 Email: [email protected] Fax: +852 2694 1338

External Photos of Image ONE Bluetooth Bluetooth antenna

Approved by /Date Prepared by /Date Scale Fujikon Model No.: Customer Model No.: Bom No.: Color 顏色 Film No. 菲林編號 準備(日期): 批準(日期): 比例 Unit Rev. MM 單位版本 A 1:1 PRINTING INFORMATION 印 字 資 料 編號: No. T3429259 AX-9968-0000-4 富士高實業有限公司 CTL-BT5122 Input From 資料輸入: T3429259-01 A 朱紹豐 2012.07.31 PMS 425C PDB11-0137 Color Color 顏色 顏色 Color 顏色 Color 顏色 Film No. 菲林編號 Film No. 菲林編號 Film No. 菲林編號 Film No. 菲林編號 1 Headband amr cover 20-4382-9001-4 (Black) M o d e l : I m a g e O N E B l u e t o o t h F C C I D : T T C - B T 5 1 2 2 I C : 9 3 0 5 A - B T 5 1 2 2 I n p u t : 5 V 0 . 5 A 5 . 0 m m 30.0 mm 10.0 mm Model: Image ONE Bluetooth FCC ID: TTC-BT5122 IC: 9305A-BT5122 Input: 5V 0.5A Model: Image ONE Bluetooth FCC ID: TTC-BT5122 IC: 9305A-BT5122 Input: 5V 0.5A 200% Left

30.0 mm 10.0 mm Model: Image ONE Bluetooth FCC ID: TTC-BT5122 IC: 9305A-BT5122 Input: 5V 0.5A Print colour: PMS 425C M de : mage ON B u tooth o l I E l e FCC ID TTC- T512 : B 2 IC: 9305A-BT51 2 2 In ut 5V 0. A p : 5 o e l m a e N E lu o M d : I g O B e t o th F I : T C T 1 2 2 C C D T -B 5 9 5 A - T 1 2 IC : 3 0 B 5 2 In t: V p u 5 0 .5 A Model: Image ONE Bluetooth FCC ID: TTC-BT5122 IC: 9305A-BT5122 Input: 5V 0.5A 200%

Report Number: 68.950.12.074.01 Page 1 of 1 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Maximum Permissible Exposure(MPE) Estimation for Image ONE Bluetooth 1. Introduction Image ONE Bluetooth is Bluetooth headset, which contain Bluetooth function inside. 2. Limit and Guidelines on Exposure to Electromagnetic Fields According to§15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB 447498 D01 Mobile Portable RF Exposure v03r03, no SAR required if power is lower than the flowing threshold: When routine evaluation is required for SAR and the output power is ≤ 60/f(GHz) mW, the test reduction and test exclusion procedures given herein, or in KDB 616217 or KDB 648474, are applicable. A device may be used in portable exposure conditions with no restrictions on host platforms when either the source-based time-averaged output power is ≤ 60/f(GHz) mW or all measured 1-g SAR are < 0.4 W/kg.10 When SAR evaluation is required, the most conservative exposure conditions for all expected operating configurations must be tested. 3. Calculation method Max Peak output power: GFSK mode 2402 MHz: 3.97dBm=2.495mW 60/ fGHz = 60/2.402 = 24.98mW Max Peak output power<60/ fGHz This is a portable device and the Max Peak outpur power of EUT is less than 24.98 mW, so SAR evaluation is not necessary. Jiangsu TUV Product Service Ltd. Shenzhen Branch Reviewed by: Prepared By: Ken Li/ EMC Project Manager Cookies Bu// EMC Project Engineer Date: 2012-08-7 Date: 2012-08-7

Report Number: 68.950.12.074.01 Page 1 of 64 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 FCC- TEST REPORT Report Number : 68.950.12.074.01 Date of Issue: 7 August 2012 Model : Image ONE Bluetooth Product Type : Bluetooth headset Applicant : Fujikon Industrial Co., Ltd. Address : 16/F Tower 1, Grand Central Plaza, 138 Shatin Rural Committee Rd., Shatin, N.T. HongKong Production Facility : Charter Media (Dongguan) Co., Ltd. Address : Dabandi Industrial Zone, Daning District, Humen Town, Dongguan City, Guangdong Province 523930, P. R. China Test Result :  Positive  Negative Total pages including Appendices : 64 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. Jiangsu TÜV Product Service Ltd. – Shenzhen Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. Jiangsu TÜV Product Service Ltd. – Shenzhen Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from Jiangsu TÜV Product Service Ltd. – Shenzhen Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval Report Number: 68.950.12.074.01 Page 2 of 64 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 1 Table of Contents 1 Table of Contents............................................................................................ 2 2 Details about the Test Laboratory..................................................................... 3 3 Description of the Equipment Under Test............................................................ 4 4 Summary of Test Standards............................................................................. 5 5 Summary of Test Results................................................................................ 6 6 General Remarks.......................................................................................... 7 7 Technical Requirements................................................................................. 8 7.1 Conducted Emission AC Power Port......................................................... 8 7.2 Conducted Peak Power......................................................................... 12 7.3 Band edge compliance of RF emission...................................................... 14 7.4 Spurious RF Conducted emission............................................................ 24 7.5 Spurious radiated emissions................................................................... 35 7.6 20dB Bandwidth................................................................................... 39 7.7 Carrier Frequency Separation................................................................. 47 7.8 Number of Hopping Frequencies ............................................................. 50 7.9 Dwell Time.......................................................................................... 53 8 System Measurement Uncertainty................................................................... 64 Report Number: 68.950.12.074.01 Page 3 of 64 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 2 Details about the Test Laboratory Details about the Test Laboratory Location 1: Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6th Floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District 518048, Shenzhen,P.R.C. Telephone: 86 755 8828 6998 Fax: 86 755 8828 5299 Location 2: Audix Technology (shenzhen) Co.,Ltd Block Shenzhen, Science & Industry Park, Nantou, Shenzhen, Guangdong, China Telephone: 86 755 2663 9496 Fax: 86 755 2663 2877 Report Number: 68.950.12.074.01 Page 4 of 64 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 3 Description of the Equipment Under Test Description of the Equipment Under Test Product: Bluetooth headset Model no.: Image ONE Bluetooth Brand Name: Klipsch Options and accessories: NIL Rating: 3.7VDC (supplied by Battery) (or supplied by USB port of PC via USB cable) RF Transmission Frequency: 2402-2480MHz Antenna Gain: 0dBi Description of the EUT: NIL Auxiliary Equipment Used during Test: DESCRIPTION MANUFACTURER MODEL NO.(SHIELD) S/N(LENGTH) NoteBook Lenovo XC200 --- Report Number: 68.950.12.074.01 Page 5 of 64 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 4 Summary of Test Standards Test Standards FCC Part 15 Subpart C, 10-1-2011 Edition PART 15 - RADIO FREQUENCY DEVICES Subpart C - Intentional Radiators Report Number: 68.950.12.074.01 Page 6 of 64 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, …

Text truncated - open the document above for the full version.

Page 1 of 2 Test setup photos of Image ONE Bluetooth 1. Conducted Emission Test setup Charging and transmitting: 2. Radiated Emission Test Transmitting mode (below 1GHz) Page 2 of 2 Transmitting mode (Above 1GHz)

Page 1 of 2 Test setup photos of Image ONE Bluetooth 1. Conducted Emission Test setup Charging and transmitting: 2. Radiated Emission Test Transmitting mode (below 1GHz) Page 2 of 2 Transmitting mode (Above 1GHz)