TVO-FLUXBOXTD1Flux system box + TD1

To: Kiwa Netherlands B.V Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Sensys Gatso Group BV Claes Tillyweg 2 2031CW Haarlem PO Box 4959 2003 EZ Haarlem The Netherlands T +31 23 525 50 50 F +31 23 527 69 61 [email protected] www.sensysgatso.com RABOBANK IBAN NL80 RABO 0303 0239 96 SWIFT / BIC RABONL2U CC 34030301 AMSTERDAM VAT NR NL0039.99.922.B.01 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company name: Sensys Gatso USA, Inc FRN: 0033787029 Contact person name: Bill Braden Street address: 900 Cummings Center ZIP/City/State 01915, Beverly, MA Telephone number: +1 978 922 7294 Email address: [email protected] Signature: Date: 17-02-2026 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Sensys Gatso Netherlands B.V. Grantee Code: TVO Contact person name: Bram Mulders Street address: Claes Tillyweg 2 ZIP/City/State/Country 2031CW, Haarlem, Netherlands Telephone number: 0031 23 525 5050 Email address: [email protected] Signature: Date: 17-02-2026

To: Kiwa Netherlands B.V Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Certification Application Attestation Statements Sensys Gatso Netherlands B.V. FRN: 0014392930 Claes Tillyweg 2 2031CW Haarlem, Netherlands Subject: FCC ID: TVO-FLUXBOXTD1 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) Sensys gatso Netherlands B.V. certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment 1 authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) Sensys Gatso Netherlands B.V. (“the applicant”) certifies that, as of the date of the filing of this application, the applicant 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK” ☐ - is / [X] - is not (3) identified on the Covered List as an entity producing “covered” equipment. Date: 17-20-2026 City: Haarlem, Netherlands B.V. Name (2) : B. Mulders Function: VP engineering Telephone number: +31 23 525 50 50 Email address: [email protected] Signature: 2

To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: TVO-FLUXBOXTD1 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: ☐ Bill(s) of Material X Block Diagrams ☐ Operational Description ☐ Schematic Diagrams ☐ Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): X Internal Photos X User’s Manual X Test Set-up Photos X External Photos Justification: The above exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors Date: 05-03-2026 Name and signature of applicant: B. Mulders 2

Location of the label Product label FCC 15B comply label V1 [Title] 1 Location: Flux systembox back side [Title] 2

Kiwa Nederland B.V. Test report for 47 CFR Part 15 Subpart B ICES-Gen, ICES-003 The RvA is signatory to ILAC - MRA Product name : Flux System box Applicant : Sensys Gatso Netherlands B.V. Test report No. : P000537565 001 v1.00 Report number: P000537565 001 v1.00 Kiwa Nederland B.V. Page 1 of 21 Laboratory information Accreditation Kiwa Nederland B.V. complies with the accreditation criteria for test laboratories as laid down in ISO/IEC 17025:2017. The accreditation covers the quality system of the laboratory as well as the specific activities as described in the authorized annex bearing the accreditation number L015 and is granted by the Dutch Council For Accreditation (RvA: Raad voor Accreditatie). Kiwa Nederland B.V. is designated by the FCC as an Accredited Test Firm for compliance testing of equipment subject to Certification under Parts 15 & 18. The Designation number is: NL0001. Kiwa Nederland B.V. is a Wireless Device Testing laboratory recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements. The Industry Canada company number for Kiwa Nederland B.V. is: 4173A. The CABID is NL0001. Kiwa Nederland B.V. is a registered Conformity Assessment body (CAB) under the Japan-EC MRA (Agreement on Mutual Recognition between Japan and the European Community). The registration number is: 201. Documentation The test report must always be reproduced in full; reproduction of an excerpt only is subject to written approval of the testing laboratory. The documentation of the testing performed on the tested devices is archived for 10 years at Kiwa Nederland B.V. Testing Location Test Site Kiwa Nederland B.V. Test Site location Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Tel. +31 88998 3393 Test Site FCC NL0001 CABID NL0001 Report number: P000537565 001 v1.00 Kiwa Nederland B.V. Page 2 of 21 Revision History Version Date Remarks By v0.50 11-12-2025 First draft AB v1.00 26-01-2026 First release RvB Report number: P000537565 001 v1.00 Kiwa Nederland B.V. Page 3 of 21 Table of Contents Revision History ............................................................................................................................................... 2 Summary of Test results .................................................................................................................................. 4 1 General Description ................................................................................................................................. 5 1.1 Applicant ............................................................................................................................................... 5 1.2 Manufacturer ........................................................................................................................................ 5 1.3 Tested Equipment Under Test (EUT) ..................................................................................................... 5 1.4 Product specifications of Equipment under test ................................................................................... 7 1.5 Environmental conditions ..................................................................................................................... 7 1.6 Measurement standards ....................................................................................................................... 7 1.7 Applicable standards ............................................................................................................................. 7 1.8 Observation and remarks ...................................................................................................................... 7 1.9 Conclusions ........................................................................................................................................... 8 2 Test configuration of the Equipment Under Test ...................................................................................... 9 2.1 Test mode ............................................................................................................................................. 9 2.2 Test setups ............................................................................................................................................ 9 2.2.1 Radiated emissions test setup 30 MHz - 1 GHz ................................................................................ 9 2.2.2 Radiated emissions test setup above 1 GHz ..................................................................................... 9 2.3 Test methodology ............................................................................................................................... 10 2.4 Equipment modifications .................................................................................................................... 10 2.5 Equipment used in the test configuration .......................................................................................... 11 2.6 Sample calculations ............................................................................................................................. 11 3 Test results ............................................................................................................................................. 12 3.1 Radiated spurious emissions ............................................................................................................... 12 3.1.1 Limit ................................................................................................................................................ 12 3.1.2 Measurement instruments ............................................................................................................. 12 3.1.3 Test setup ....................................................................................................................................... 12 3.1.4 Test procedure ...…

Text truncated - open the document above for the full version.