TX2-RTL8723AEN0802.11b/g/n RTL8723AE Combo NGFF Card

User’s Manual Rev. 1.0 16 Nov 2012 Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Tel.: +886-3-578-0211. Fax: +886-3-577-6047 www.realtek.com.tw RTL8723AEN0 NGFF-RTL8723AE User Manual ii Rev.1.0 COPYRIGHT © 2011 Realtek Semiconductor Corp. All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of Realtek Semiconductor Corp. DISCLAIMER Realtek provides this document “as is”, without warranty of any kind, neither expressed nor implied, including, but not limited to, the particular purpose. Realtek may make improvements and/or changes in this document or in the product described in this document at any time. This document could include technical inaccuracies or typographical errors. TRADEMARKS Realtek is a trademark of Realtek Semiconductor Corporation. Other names mentioned in this document are trademarks/registered trademarks of their respective owners. USING THIS DOCUMENT This document is intended for the software engineer’s reference and provides detailed programming information. Though every effort has been made to ensure that this document is current and accurate, more information may have become available subsequent to the production of this guide. In that event, please contact your Realtek representative for additional information that may help in the development process. NGFF-RTL8723AE User Manual iii Rev.1.0 Table of Contents 1. GENERAL DESCRIPTION................................................................................................................................................ 1 1.1. RTL8723AE .................................................................................................................................................................... 1 2. FEATURES............................................................................................................................................................................... 1 1.2. ENVIRONMENTAL ............................................................................................................................................................. 4 1.2.1. Operating ............................................................................................................................................................... 4 1.2.2. Storage.................................................................................................................................................................... 4 1.3. FUNCTIONAL SPECIFICATIONS .......................................................................................................................................... 4 1.4. WARNING......................................................................................................................................................................... 6 4.5.1 Federal Communication Commission Interference Statement ...................................................................................... 6 4.5.2 Industry Canada Statement .......................................................................................................................................... 7 4.5.3 NCC警語 ................................................................................................................................................................... 10 List of Tables TABLE 2. FUNCTIONAL SPECIFICATIONS ......................................................................................................................................... 4 List of Figures NGFF-RTL8723AE User Manual 1 Rev.1.0 1. General Description 1.1. RTL8723AE The Realtek RTL8723AE is a highly integrated single-chip 802.11n Wireless LAN (WLAN) PCI Express network interface controller with integrated Bluetooth 2.1/3/0/4.0 USB interface controller. It combines a WLAN MAC, a 1T1R capable WLAN baseband, and RF in s single chip. The RTL8723AE provides a complete solution for a high-performance integrated wireless and Bluetooth device. The integration provides better coordination between 802.11 and Bluetooth, and with sophisticated dynamic power control and packet traffic arbitration, RTL8723AE is able to provide the best coexistence performance. RTL8723AE also integrates RF/PA/LNA for both 802.11n and Bluetooth so that the number of external components is reduced to minimum. The 802.11 part supports 150Mbps PHY rate and delivers reliable throughput from an extended distance. The Bluetooth part supports latest 3.0+HS/4.0+LE operation and provides smooth user experience under all usage scenarios. Optimized RF architecture and baseband algorithms provide superb performance and lowest power consumption. 2. Features 2.1 General  68-pin QFN  CMOS MAC, Baseband PHY, and RF in a single chip for IEEE 802.11b/g/n compatible WLAN  Complete 802.11n solution for 2.4GHz band  72.2Mbps receive PHY rate and 72.2Mbps transmit PHY rate using 20MHz bandwidth  150Mbps receive PHY rate and 150Mbps transmit PHY rate using 40MHz bandwidth  Compatible with 802.11n specification  Backward compatible with 802.11b/g devices while operating in 802.11n mode  Qualified Bluetooth v2.1+EDR and v3.0+HS Systems  Support for v4.0 Bluetooth Low Energy  Integrated class1, class2, and class3 PA and modem in Bluetooth Controller NGFF-RTL8723AE User Manual 2 Rev.1.0 Standards Supported  IEEE 802.11b/g/n compatible WLAN  IEEE 802.11e QoS Enhancement (WMM)  IEEE 802.11h TPC, Spectrum Measurement  802.11i (WPA, WPA2). Open, shared key, and pair-wise key authentication services  Cisco Compatible Extensions (CCX) for WLAN devices Host Interface  Complies with PCI Express Base Specification Revision 1.1 for WLAN  Complies with USB1.1 Specification for Bluetooth WLAN MAC Features  Frame aggregation for increased MAC efficiency (A-MSDU, A-MPDU)  Low latency immediate Hi…

Text truncated - open the document above for the full version.

Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Declaration for no non-US channel operation November 21, 2012 W e, Realtek Semiconductor Corp. declare that the device does not support any non-US channels in all the operational mode(s) for the following product. FCC ID: TX2-RTL8723AEN0 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ------------------------------------------------------- Ricky Lee/ Assistant Project Manager Realtek Semiconductor Corp. Tel: +886-3-578-0211*3213 Fax: +886-3-577-6598 E-Mail: [email protected]

Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Date：2012/11/21 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: TX2-RTL8723AEN0 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ------------------------------------------------------- Ricky Lee/ Assistant Project Manager Realtek Semiconductor Corp. Tel: +886-3-578-0211*3213 Fax: +886-3-577-6598 E-Mail: [email protected]

Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Date: 2012-11-21 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: TX2-RTL8723AEN0 Pursuant to DA 04-1705 of the Commission’s Rules, we request short-term confidential treatment for the following information for 180 days of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External Photos Test Setup Photos User’s Manual Internal Photo Thank you! Sincerely yours, Ricky Lee/ Assistant Project Manager Realtek Semiconductor Corp. Tel: +886-3-578-0211*3213 Fax: +886-3-577-6598 E-Mail: [email protected]

Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Power of Attorney Date：2012/11/21 To whom it may concern: W e, the undersigned Realtek Semiconductor Corp. hereby authorize Bureau Veritas Consumer Product Service (Hong Kong) Limited, Taoyuan Branch of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. This authorization is limited to the following products： FCC ID: TX2-RTL8723AEN0 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------------------- Ricky Lee/ Assistant Project Manager Tel: +886-3-578-0211*3213 Fax: +886-3-577-6598 E-Mail: [email protected]

FCC ID: TX2-RTL8723AEN0 Report No.: RF121115E05 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch December 5, 2012 Dear Application Examiner, Realtek Semiconductor Corp., It’s a RTL8723AEN0, FCC ID: TX2-RTL8723AEN0 would like to have your authorization as a modular device. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.”: The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip RTL8723AE. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is RTL8723AE. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: TX2-RTL8723AEN0 Report No.: RF121115E05 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, signature Hank Chung Assistant Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Hsinchu Branch

Report No.: 121115E05 1 of 3 CONSTRUCTION PHOTOS OF EUT Report No.: 121115E05 3 of 3

FCC ID : TX2-RTL8723AE „ Label Sample 20 mm MADE IN TAIWAN 1.5mm 802.11b/g/n RTL8723AE Combo NGFF Card Model Name : RTL8723AEN0 DC Input Voltage Range : 3.3V490mA FCC ID : TX2-RTL8723AEN0

(Fig.1) FCC ID: TX2-RTL8723AEN0 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. LABEL HERE

Report No.: 121115E05 2 of 3

Report No.: SA121115E05 1 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA120508E12dated Apr. 10, 2012 RF EXPOSURE REPORT REPORT NO.: SA121115E05 MODEL NO.: RTL8723AEN0 FCC ID: TX2-RTL8723AEN0 RECEIVED: Oct. 25, 2012 TESTED: Oct. 25 to Nov. 26, 2012 ISSUED: Dec. 04, 2012 APPLICANT: Realtek Semiconductor Corp. ADDRESS: No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA121115E05 2 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA120508E12dated Apr. 10, 2012 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT .............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ........................... 6 Report No.: SA121115E05 3 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA120508E12dated Apr. 10, 2012 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA121115E05 Original release Dec. 04, 2012 Report No.: SA121115E05 4 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA120508E12dated Apr. 10, 2012 1. CERTIFICATION PRODUCT: 802.11b/g/n RTL8723AE Combo NGFF Card BRAND NAME: Realtek MODEL NO.: RTL8723AEN0 TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: Realtek Semiconductor Corp. TESTED DATE: Oct. 25 to Nov. 26, 2012 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: RTL8723AEN0) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Sep. 21, 2012 ( Lori Chung, Specialist ) APPROVED BY : , DATE: Sep. 21, 2012 ( May Chen, Deputy Manager ) Report No.: SA121115E05 5 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA120508E12dated Apr. 10, 2012 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA121115E05 6 of 6 Report Format Version 5.0.0 Cancels and replaces the report No.: SA120508E12dated Apr. 10, 2012 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For WLAN: FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412 - 2462 204.174 3.5 20 0.09093 1.00 For BT(LE MODE) FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412 - 2462 3.020 3.5 20 0.00135 1.00 For Bluetooth: FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2402-2480 13.152 3.5 20 0.00586 1.00 CONCLUSION: Both of the WLAN and Bluetooth can transmit simultaneously, the formula of calculated the MPE is: CPD 1 / LPD 1 + CPD 2 / LPD 2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.09093 / 1 + 0.00586 / 1 = 0.097, which is less than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit. --- END ---

Report No.: RF121115E05-2 1 of 22 Report Format Version 5.1.0 Cancels and replaces the report No.: RF110718E01-2 dated Aug. 26, 2011 Supplemental “Transmit Simultaneously” Test Report REPORT NO.: RF121115E05-2 MODEL NO.: RTL8723AEN0 FCC ID: TX2-RTL8723AEN0 RECEIVED: Nov. 15, 2012 TESTED: Nov. 20 to 26, 2012 ISSUED: Dec. 04, 2012 APPLICANT: Realtek Semiconductor Corp. ADDRESS: No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF121115E05-2 2 of 22 Report Format Version 5.1.0 Cancels and replaces the report No.: RF110718E01-2 dated Aug. 26, 2011 Table of Contents RELEASE CONTROL RECORD .................................................................................................... 3 1. CERTIFICATION ............................................................................................................... 4 2. SUMMARY OF TEST RESULTS ........................................................................................ 5 2.1 MEASUREMENT UNCERTAINTY ..................................................................................... 5 3. GENERAL INFORMATION ................................................................................................ 6 3.1 GENERAL DESCRIPTION OF EUT ................................................................................... 6 3.2 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL:....................................... 8 3.3 DESCRIPTION OF SUPPORT UNITS ............................................................................... 9 3.4 CONFIGURATION OF SYSTEM UNDER TEST ................................................................. 9 4. TEST TYPES AND RESULTS .......................................................................................... 10 4.1 CONDUCTED EMISSION MEASUREMENT .................................................................... 10 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .................................................. 10 4.1.2 TEST INSTRUMENTS ..................................................................................................... 10 4.1.3 TEST PROCEDURES ..................................................................................................... 11 4.1.4 DEVIATION FROM TEST STANDARD............................................................................. 11 4.1.5 TEST SETUP .................................................................................................................. 11 4.1.6 EUT OPERATING CONDITIONS ..................................................................................... 12 4.1.7 TEST RESULTS .............................................................................................................. 13 4.2 RADIATED EMISSION MEASUREMENT......................................................................... 15 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT....................................................... 15 4.2.2 TEST INSTRUMENTS ..................................................................................................... 16 4.2.3 TEST PROCEDURES ..................................................................................................... 17 4.2.4 DEVIATION FROM TEST STANDARD............................................................................. 17 4.2.5 TEST SETUP .................................................................................................................. 18 4.2.6 EUT OPERATING CONDITIONS ..................................................................................... 18 4.2.7 TEST RESULTS .............................................................................................................. 19 5. INFORMATION ON THE TESTING LABORATORIES ...................................................... 21 6. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB .................................................................................................... 22 Report No.: RF121115E05-2 3 of 22 Report Format Version 5.1.0 Cancels and replaces the report No.: RF110718E01-2 dated Aug. 26, 2011 RELEASE CON…

Text truncated - open the document above for the full version.

Report No.: RF121115E05-1 1 of 52 Report Format Version 5.1.0 FCC TEST REPORT REPORT NO.: RF121115E05-1 MODEL NO.: RTL8723AEN0 FCC ID: TX2-RTL8723AEN0 RECEIVED: Nov. 15, 2012 TESTED: Nov. 25 to Nov. 26, 2012 ISSUED: Dec. 04, 2012 APPLICANT: Realtek Semiconductor Corp. ADDRESS: No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, Taiwan, R.O.C. TEST LOCATION (2): No.49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF121115E05-1 2 of 52 Report Format Version 5.1.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ........................................................................................................ 4 1 CERTIFICATION ................................................................................................................ 5 2 SUMMARY OF TEST RESULTS ......................................................................................... 6 2.1 ME ASUREMENT UNCERTAINTY ..................................................................................... 7 3 GENERAL INFORMATION ................................................................................................. 8 3.1 GENERAL DESCRIPTION OF EUT .................................................................................... 8 3.2 DESCRIPTION OF TEST MODES ...................................................................................... 9 3.3 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL: ......................................10 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS .....................................................12 3.5 DESCRIPTION OF SUPPORT UNITS ...............................................................................13 3.6 CONFIGURATION OF SYSTEM UNDER TEST.................................................................13 4 TEST PROCEDURES AND RESULTS ..............................................................................14 4.1 CONDUCTED EMISSION MEASUREMENT .....................................................................14 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT....................................................14 4.1.2 TEST INSTRUMENTS .......................................................................................................14 4.1.3 TEST PROCEDURES .......................................................................................................15 4.1.4 DEVIATION FROM TEST STANDARD ..............................................................................15 4.1.5 TEST SETUP ....................................................................................................................15 4.1.6 EUT OPERATING CONDITIONS .......................................................................................16 4.1.7 TEST RESULTS ................................................................................................................17 4.2 RADIATED EMISSION MEASUREMENT ..........................................................................19 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT ........................................................19 4.2.2 TEST INSTRUMENTS .......................................................................................................20 4.2.3 TEST PROCEDURES .......................................................................................................21 4.2.4 DEVIATION FROM TEST STANDARD ..............................................................................21 4.2.5 TEST SETUP ....................................................................................................................22 4.2.6 EUT OPERATING CONDITIONS .......................................................................................22 4.2.7 TEST RESULTS ................................................................................................................23 4.3 NUMBER OF HOPPING FREQUENCY USED ...............................................................…

Text truncated - open the document above for the full version.